2 * Copyright (c) 2012, 2014 ARM Limited
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
14 * Copyright (c) 2002-2005 The Regents of The University of Michigan
15 * Copyright (c) 2011 Regents of the University of California
16 * All rights reserved.
18 * Redistribution and use in source and binary forms, with or without
19 * modification, are permitted provided that the following conditions are
20 * met: redistributions of source code must retain the above copyright
21 * notice, this list of conditions and the following disclaimer;
22 * redistributions in binary form must reproduce the above copyright
23 * notice, this list of conditions and the following disclaimer in the
24 * documentation and/or other materials provided with the distribution;
25 * neither the name of the copyright holders nor the names of its
26 * contributors may be used to endorse or promote products derived from
27 * this software without specific prior written permission.
29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
30 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
31 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
32 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
33 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
34 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
35 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
36 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
37 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
38 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
39 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
41 * Authors: Steve Reinhardt
54 #include "arch/isa_traits.hh"
55 #include "base/loader/symtab.hh"
56 #include "base/misc.hh"
57 #include "base/statistics.hh"
58 #include "config/the_isa.hh"
59 #include "enums/MemoryMode.hh"
60 #include "mem/mem_object.hh"
61 #include "mem/port.hh"
62 #include "mem/port_proxy.hh"
63 #include "mem/physical.hh"
64 #include "params/System.hh"
67 * To avoid linking errors with LTO, only include the header if we
68 * actually have the definition.
70 #if THE_ISA != NULL_ISA
71 #include "cpu/pc_event.hh"
81 class System : public MemObject
86 * Private class for the system port which is only used as a
87 * master for debug access and for non-structural entities that do
88 * not have a port of their own.
90 class SystemPort : public MasterPort
95 * Create a system port with a name and an owner.
97 SystemPort(const std::string &_name, MemObject *_owner)
98 : MasterPort(_name, _owner)
100 bool recvTimingResp(PacketPtr pkt)
101 { panic("SystemPort does not receive timing!\n"); return false; }
103 { panic("SystemPort does not expect retry!\n"); }
106 SystemPort _systemPort;
111 * After all objects have been created and all ports are
112 * connected, check that the system port is connected.
117 * Get a reference to the system port that can be used by
118 * non-structural simulation objects like processes or threads, or
119 * external entities like loaders and debuggers, etc, to access
122 * @return a reference to the system port we own
124 MasterPort& getSystemPort() { return _systemPort; }
127 * Additional function to return the Port of a memory object.
129 BaseMasterPort& getMasterPort(const std::string &if_name,
130 PortID idx = InvalidPortID);
134 * Is the system in atomic mode?
136 * There are currently two different atomic memory modes:
137 * 'atomic', which supports caches; and 'atomic_noncaching', which
138 * bypasses caches. The latter is used by hardware virtualized
139 * CPUs. SimObjects are expected to use Port::sendAtomic() and
140 * Port::recvAtomic() when accessing memory in this mode.
142 bool isAtomicMode() const {
143 return memoryMode == Enums::atomic ||
144 memoryMode == Enums::atomic_noncaching;
148 * Is the system in timing mode?
150 * SimObjects are expected to use Port::sendTiming() and
151 * Port::recvTiming() when accessing memory in this mode.
153 bool isTimingMode() const {
154 return memoryMode == Enums::timing;
158 * Should caches be bypassed?
160 * Some CPUs need to bypass caches to allow direct memory
161 * accesses, which is required for hardware virtualization.
163 bool bypassCaches() const {
164 return memoryMode == Enums::atomic_noncaching;
170 * Get the memory mode of the system.
172 * \warn This should only be used by the Python world. The C++
173 * world should use one of the query functions above
174 * (isAtomicMode(), isTimingMode(), bypassCaches()).
176 Enums::MemoryMode getMemoryMode() const { return memoryMode; }
179 * Change the memory mode of the system.
181 * \warn This should only be called by the Python!
183 * @param mode Mode to change to (atomic/timing/...)
185 void setMemoryMode(Enums::MemoryMode mode);
189 * Get the cache line size of the system.
191 unsigned int cacheLineSize() const { return _cacheLineSize; }
193 #if THE_ISA != NULL_ISA
194 PCEventQueue pcEventQueue;
197 std::vector<ThreadContext *> threadContexts;
200 ThreadContext *getThreadContext(ContextID tid)
202 return threadContexts[tid];
207 assert(_numContexts == (int)threadContexts.size());
211 /** Return number of running (non-halted) thread contexts in
212 * system. These threads could be Active or Suspended. */
213 int numRunningContexts();
219 /** Port to physical memory used for writing object files into ram at
223 /** kernel symbol table */
224 SymbolTable *kernelSymtab;
226 /** Object pointer for the kernel code */
229 /** Begining of kernel code */
232 /** End of kernel code */
235 /** Entry point in the kernel to start at */
238 /** Mask that should be anded for binary/symbol loading.
239 * This allows one two different OS requirements for the same ISA to be
240 * handled. Some OSes are compiled for a virtual address and need to be
241 * loaded into physical memory that starts at address 0, while other
242 * bare metal tools generate images that start at address 0.
246 /** Offset that should be used for binary/symbol loading.
247 * This further allows more flexibily than the loadAddrMask allows alone in
248 * loading kernels and similar. The loadAddrOffset is applied after the
257 uint64_t allocatePID()
262 /** Get a pointer to access the physical memory of the system */
263 PhysicalMemory& getPhysMem() { return physmem; }
265 /** Amount of physical memory that is still free */
266 Addr freeMemSize() const;
268 /** Amount of physical memory that exists */
269 Addr memSize() const;
272 * Check if a physical address is within a range of a memory that
273 * is part of the global address map.
275 * @param addr A physical address
276 * @return Whether the address corresponds to a memory
278 bool isMemAddr(Addr addr) const;
281 * Get the architecture.
283 Arch getArch() const { return Arch::TheISA; }
286 * Get the page bytes for the ISA.
288 Addr getPageBytes() const { return TheISA::PageBytes; }
291 * Get the number of bits worth of in-page adress for the ISA.
293 Addr getPageShift() const { return TheISA::PageShift; }
297 PhysicalMemory physmem;
299 Enums::MemoryMode memoryMode;
301 const unsigned int _cacheLineSize;
303 uint64_t workItemsBegin;
304 uint64_t workItemsEnd;
306 std::vector<bool> activeCpus;
308 /** This array is a per-sytem list of all devices capable of issuing a
309 * memory system request and an associated string for each master id.
310 * It's used to uniquely id any master in the system by name for things
311 * like cache statistics.
313 std::vector<std::string> masterIds;
317 /** Request an id used to create a request object in the system. All objects
318 * that intend to issues requests into the memory system must request an id
319 * in the init() phase of startup. All master ids must be fixed by the
320 * regStats() phase that immediately preceeds it. This allows objects in the
321 * memory system to understand how many masters may exist and
322 * appropriately name the bins of their per-master stats before the stats
325 MasterID getMasterId(std::string req_name);
327 /** Get the name of an object for a given request id.
329 std::string getMasterName(MasterID master_id);
331 /** Get the number of masters registered in the system */
332 MasterID maxMasters()
334 return masterIds.size();
337 virtual void regStats();
339 * Called by pseudo_inst to track the number of work items started by this
345 return ++workItemsBegin;
349 * Called by pseudo_inst to track the number of work items completed by
355 return ++workItemsEnd;
359 * Called by pseudo_inst to mark the cpus actively executing work items.
360 * Returns the total number of cpus that have executed work item begin or
364 markWorkItem(int index)
367 assert(index < activeCpus.size());
368 activeCpus[index] = true;
369 for (std::vector<bool>::iterator i = activeCpus.begin();
370 i < activeCpus.end(); i++) {
376 inline void workItemBegin(uint32_t tid, uint32_t workid)
378 std::pair<uint32_t,uint32_t> p(tid, workid);
379 lastWorkItemStarted[p] = curTick();
382 void workItemEnd(uint32_t tid, uint32_t workid);
385 * Fix up an address used to match PCs for hooking simulator
386 * events on to target function executions. See comment in
387 * system.cc for details.
389 virtual Addr fixFuncEventAddr(Addr addr)
391 panic("Base fixFuncEventAddr not implemented.\n");
396 * Add a function-based event to the given function, to be looked
397 * up in the specified symbol table.
399 * The ...OrPanic flavor of the method causes the simulator to
400 * panic if the symbol can't be found.
402 * @param symtab Symbol table to use for look up.
403 * @param lbl Function to hook the event to.
404 * @param desc Description to be passed to the event.
405 * @param args Arguments to be forwarded to the event constructor.
407 template <class T, typename... Args>
408 T *addFuncEvent(const SymbolTable *symtab, const char *lbl,
409 const std::string &desc, Args... args)
411 Addr addr M5_VAR_USED = 0; // initialize only to avoid compiler warning
413 #if THE_ISA != NULL_ISA
414 if (symtab->findAddress(lbl, addr)) {
415 T *ev = new T(&pcEventQueue, desc, fixFuncEventAddr(addr),
416 std::forward<Args>(args)...);
425 T *addFuncEvent(const SymbolTable *symtab, const char *lbl)
427 return addFuncEvent<T>(symtab, lbl, lbl);
430 template <class T, typename... Args>
431 T *addFuncEventOrPanic(const SymbolTable *symtab, const char *lbl,
434 T *e(addFuncEvent<T>(symtab, lbl, std::forward<Args>(args)...));
436 panic("Failed to find symbol '%s'", lbl);
443 * Add a function-based event to a kernel symbol.
445 * These functions work like their addFuncEvent() and
446 * addFuncEventOrPanic() counterparts. The only difference is that
447 * they automatically use the kernel symbol table. All arguments
448 * are forwarded to the underlying method.
450 * @see addFuncEvent()
451 * @see addFuncEventOrPanic()
453 * @param lbl Function to hook the event to.
454 * @param args Arguments to be passed to addFuncEvent
456 template <class T, typename... Args>
457 T *addKernelFuncEvent(const char *lbl, Args... args)
459 return addFuncEvent<T>(kernelSymtab, lbl,
460 std::forward<Args>(args)...);
463 template <class T, typename... Args>
464 T *addKernelFuncEventOrPanic(const char *lbl, Args... args)
466 T *e(addFuncEvent<T>(kernelSymtab, lbl,
467 std::forward<Args>(args)...));
469 panic("Failed to find kernel symbol '%s'", lbl);
475 std::vector<BaseRemoteGDB *> remoteGDB;
476 std::vector<GDBListener *> gdbListen;
480 typedef SystemParams Params;
491 const Params *params() const { return (const Params *)_params; }
496 * Returns the addess the kernel starts at.
497 * @return address the kernel starts at
499 Addr getKernelStart() const { return kernelStart; }
502 * Returns the addess the kernel ends at.
503 * @return address the kernel ends at
505 Addr getKernelEnd() const { return kernelEnd; }
508 * Returns the addess the entry point to the kernel code.
509 * @return entry point of the kernel code
511 Addr getKernelEntry() const { return kernelEntry; }
513 /// Allocate npages contiguous unused physical pages
514 /// @return Starting address of first page
515 Addr allocPhysPages(int npages);
517 ContextID registerThreadContext(ThreadContext *tc,
518 ContextID assigned = InvalidContextID);
519 void replaceThreadContext(ThreadContext *tc, ContextID context_id);
521 void serialize(CheckpointOut &cp) const M5_ATTR_OVERRIDE;
522 void unserialize(CheckpointIn &cp) M5_ATTR_OVERRIDE;
524 void drainResume() M5_ATTR_OVERRIDE;
527 Counter totalNumInsts;
528 EventQueue instEventQueue;
529 std::map<std::pair<uint32_t,uint32_t>, Tick> lastWorkItemStarted;
530 std::map<uint32_t, Stats::Histogram*> workItemStats;
532 ////////////////////////////////////////////
534 // STATIC GLOBAL SYSTEM LIST
536 ////////////////////////////////////////////
538 static std::vector<System *> systemList;
539 static int numSystemsRunning;
541 static void printSystems();
543 // For futex system call
544 std::map<uint64_t, std::list<ThreadContext *> * > futexMap;
549 * If needed, serialize additional symbol table entries for a
550 * specific subclass of this sytem. Currently this is used by
553 * @param os stream to serialize to
555 virtual void serializeSymtab(CheckpointOut &os) const {}
558 * If needed, unserialize additional symbol table entries for a
559 * specific subclass of this system.
561 * @param cp checkpoint to unserialize from
562 * @param section relevant section in the checkpoint
564 virtual void unserializeSymtab(CheckpointIn &cp) {}
570 #endif // __SYSTEM_HH__