3 from spec
.base
import PinSpec
5 from spec
.ifaceprint
import display
, display_fns
, check_functions
6 from spec
.ifaceprint
import display_fixed
34 'PWM': 'PWM (pulse-width modulation)',
35 'MSPI2': 'SPI (Serial Peripheral Interface) Master 1',
36 'UART1': 'UART (TX/RX) 1',
37 'UART3': 'UART (TX/RX) 2',
40 ps
= PinSpec(pinbanks
, fixedpins
, function_names
)
42 ps
.gpio("", ('A', 1), 0, 0, 1)
43 ps
.gpio("", ('A', 0), 0, 1, 1)
44 ps
.gpio("", ('A', 3), 0, 2, 1)
45 ps
.gpio("", ('A', 2), 0, 3, 1)
46 ps
.gpio("", ('A', 4), 0, 5, 2)
47 ps
.gpio("", ('A', 6), 0, 9, 1)
49 ps
.gpio("", ('A', 7), 0, 13, 1)
50 ps
.gpio("", ('A', 8), 0, 10, 1)
51 ps
.gpio("", ('A', 9), 0, 12, 1)
52 ps
.gpio("", ('A', 10), 0, 11, 1)
54 ps
.gpio("", ('A', 11), 0, 4, 1)
55 ps
.gpio("", ('A', 12), 0, 7, 2)
56 ps
.gpio("", ('A', 14), 0, 14, 2)
62 ps
.pwm("", ('A', 2), 2, 0, 1)
63 ps
.pwm("", ('A', 4), 2, 1, 3)
64 ps
.pwm("", ('A', 8), 2, 4, 1)
65 ps
.pwm("", ('A', 10), 2, 5, 1)
66 #ps.pwm("", ('A', 13), 2, 5, 1)
67 ps
.mspi("2", ('A', 7), 1)
68 ps
.uart("1", ('A', 0), 1)
69 ps
.uart("3", ('A', 2), 1)
71 #ps.mquadspi("1", ('B', 0), 0)
73 # Scenarios below can be spec'd out as either "find first interface"
74 # by name/number e.g. SPI1, or as "find in bank/mux" which must be
75 # spec'd as "BM:Name" where B is bank (A-F), M is Mux (0-3)
76 # EINT and PWM are grouped together, specially, but may still be spec'd
77 # using "BM:Name". Pins are removed in-order as listed from
78 # lists (interfaces, EINTs, PWMs) from available pins.
80 minitest
= ['ULPI0/8', 'ULPI1', 'MMC', 'SD0', 'UART0',
81 'TWI0', 'MSPI0', 'B3:SD1', ]
83 minitest_pwm
= ['B2:PWM_0']
85 'MMC': 'internal (on Card)',
86 'SD0': 'user-facing: internal (on Card), multiplexed with JTAG\n'
87 'and UART2, for debug purposes',
92 'B1:LCD/22': '18-bit RGB/TTL LCD',
93 'ULPI0/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
94 'ULPI1': 'dual USB2 Host ULPI PHY'
97 ps
.add_scenario("MiniTest", minitest
, minitest_eint
, minitest_pwm
,