tests/SConscript

   1 # -*- mode:python -*-
   2
   3 # Copyright (c) 2004-2006 The Regents of The University of Michigan
   4 # All rights reserved.
   5 #
   6 # Redistribution and use in source and binary forms, with or without
   7 # modification, are permitted provided that the following conditions are
   8 # met: redistributions of source code must retain the above copyright
   9 # notice, this list of conditions and the following disclaimer;
  10 # redistributions in binary form must reproduce the above copyright
  11 # notice, this list of conditions and the following disclaimer in the
  12 # documentation and/or other materials provided with the distribution;
  13 # neither the name of the copyright holders nor the names of its
  14 # contributors may be used to endorse or promote products derived from
  15 # this software without specific prior written permission.
  16 #
  17 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  18 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  19 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  20 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  21 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  22 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  23 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  24 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  25 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  27 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28 #
  29 # Authors: Steve Reinhardt
  30 #          Kevin Lim
  31
  32 import os, signal
  33 import sys, time
  34 import glob
  35 from SCons.Script.SConscript import SConsEnvironment
  36
  37 Import('env')
  38
  39 env['DIFFOUT'] = File('diff-out')
  40
  41 # Dict that accumulates lists of tests by category (quick, medium, long)
  42 env.Tests = {}
  43
  44 def contents(node):
  45     return file(str(node)).read()
  46
  47 # functions to parse return value from scons Execute()... not the same
  48 # as wait() etc., so python built-in os funcs don't work.
  49 def signaled(status):
  50     return (status & 0x80) != 0;
  51
  52 def signum(status):
  53     return (status & 0x7f);
  54
  55 # List of signals that indicate that we should retry the test rather
  56 # than consider it failed.
  57 retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT,
  58                  signal.SIGQUIT, signal.SIGHUP)
  59
  60 # regular expressions of lines to ignore when diffing outputs
  61 output_ignore_regexes = (
  62     '^command line:',           # for stdout file
  63     '^M5 compiled ',            # for stderr file
  64     '^M5 started ',             # for stderr file
  65     '^M5 executing on ',        # for stderr file
  66     '^Simulation complete at',  # for stderr file
  67     '^Listening for',           # for stderr file
  68     'listening for remote gdb', # for stderr file
  69     )
  70
  71 output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes])
  72
  73 output_ignore_args += ' --exclude=stats.txt --exclude=outdiff'
  74
  75 def run_test(target, source, env):
  76     """Check output from running test.
  77
  78     Targets are as follows:
  79     target[0] : status
  80
  81     Sources are:
  82     source[0] : M5 binary
  83     source[1] : tests/run.py script
  84     source[2] : reference stats file
  85
  86     """
  87     # make sure target files are all gone
  88     for t in target:
  89         if os.path.exists(t.abspath):
  90             env.Execute(Delete(t.abspath))
  91
  92     tgt_dir = os.path.dirname(str(target[0]))
  93
  94     # Base command for running test.  We mess around with indirectly
  95     # referring to files via SOURCES and TARGETS so that scons can mess
  96     # with paths all it wants to and we still get the right files.
  97     cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir)
  98
  99     # Prefix test run with batch job submission command if appropriate.
 100     # Batch command also supports timeout arg (in seconds, not minutes).
 101     timeout = 15 * 60 # used to be a param, probably should be again
 102     if env['BATCH']:
 103         cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd)
 104
 105     pre_exec_time = time.time()
 106     status = env.Execute(env.subst(cmd, target=target, source=source))
 107     if status == 0:
 108         # M5 terminated normally.
 109         # Run diff on output & ref directories to find differences.
 110         # Exclude the stats file since we will use diff-out on that.
 111
 112         # NFS file systems can be annoying and not have updated yet
 113         # wait until we see the file modified
 114         statsdiff = os.path.join(tgt_dir, 'statsdiff')
 115         m_time = 0
 116         nap = 0
 117         while m_time < pre_exec_time and nap < 10:
 118             try:
 119                 m_time = os.stat(statsdiff).st_mtime
 120             except OSError:
 121                 pass
 122             time.sleep(1)
 123             nap += 1
 124
 125         outdiff = os.path.join(tgt_dir, 'outdiff')
 126         # tack 'true' on the end so scons doesn't report diff's
 127         # non-zero exit code as a build error
 128         diffcmd = 'diff -ubrs %s ${SOURCES[2].dir} %s > %s; true' \
 129                   % (output_ignore_args, tgt_dir, outdiff)
 130         env.Execute(env.subst(diffcmd, target=target, source=source))
 131         print "===== Output differences ====="
 132         print contents(outdiff)
 133         # Run diff-out on stats.txt file
 134         diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \
 135                   % (os.path.join(tgt_dir, 'stats.txt'), statsdiff)
 136         diffcmd = env.subst(diffcmd, target=target, source=source)
 137         status = env.Execute(diffcmd, strfunction=None)
 138         print "===== Statistics differences ====="
 139         print contents(statsdiff)
 140
 141     else: # m5 exit status != 0
 142         # M5 did not terminate properly, so no need to check the output
 143         if signaled(status):
 144             print 'M5 terminated with signal', signum(status)
 145             if signum(status) in retry_signals:
 146                 # Consider the test incomplete; don't create a 'status' output.
 147                 # Hand the return status to scons and let scons decide what
 148                 # to do about it (typically terminate unless run with -k).
 149                 return status
 150         else:
 151             print 'M5 exited with non-zero status', status
 152         # complete but failed execution (call to exit() with non-zero
 153         # status, SIGABORT due to assertion failure, etc.)... fall through
 154         # and generate FAILED status as if output comparison had failed
 155
 156     # Generate status file contents based on exit status of m5 or diff-out
 157     if status == 0:
 158         status_str = "passed."
 159     else:
 160         status_str = "FAILED!"
 161     f = file(str(target[0]), 'w')
 162     print >>f, tgt_dir, status_str
 163     f.close()
 164     # done
 165     return 0
 166
 167 def run_test_string(target, source, env):
 168     return env.subst("Running test in ${TARGETS[0].dir}.",
 169                      target=target, source=source)
 170
 171 testAction = env.Action(run_test, run_test_string)
 172
 173 def print_test(target, source, env):
 174     print '***** ' + contents(source[0])
 175     return 0
 176
 177 printAction = env.Action(print_test, strfunction = None)
 178
 179 # Static vars for update_test:
 180 # - long-winded message about ignored sources
 181 ignore_msg = '''
 182 Note: The following file(s) will not be copied.  New non-standard
 183       output files must be copied manually once before --update-ref will
 184       recognize them as outputs.  Otherwise they are assumed to be
 185       inputs and are ignored.
 186 '''
 187 # - reference files always needed
 188 needed_files = set(['simout', 'simerr', 'stats.txt', 'config.ini'])
 189 # - source files we always want to ignore
 190 known_ignores = set(['status', 'outdiff', 'statsdiff'])
 191
 192 def update_test(target, source, env):
 193     """Update reference test outputs.
 194
 195     Target is phony.  First two sources are the ref & new stats.txt file
 196     files, respectively.  We actually copy everything in the
 197     respective directories except the status & diff output files.
 198
 199     """
 200     dest_dir = str(source[0].get_dir())
 201     src_dir = str(source[1].get_dir())
 202     dest_files = set(os.listdir(dest_dir))
 203     src_files = set(os.listdir(src_dir))
 204     # Copy all of the required files plus any existing dest files.
 205     wanted_files = needed_files | dest_files
 206     missing_files = wanted_files - src_files
 207     if len(missing_files) > 0:
 208         print "  WARNING: the following file(s) are missing " \
 209               "and will not be updated:"
 210         print "    ", " ,".join(missing_files)
 211     copy_files = wanted_files - missing_files
 212     warn_ignored_files = (src_files - copy_files) - known_ignores
 213     if len(warn_ignored_files) > 0:
 214         print ignore_msg,
 215         print "       ", ", ".join(warn_ignored_files)
 216     for f in copy_files:
 217         if f in dest_files:
 218             print "  Replacing file", f
 219             dest_files.remove(f)
 220         else:
 221             print "  Creating new file", f
 222         copyAction = Copy(os.path.join(dest_dir, f), os.path.join(src_dir, f))
 223         copyAction.strfunction = None
 224         env.Execute(copyAction)
 225     return 0
 226
 227 def update_test_string(target, source, env):
 228     return env.subst("Updating ${SOURCES[0].dir} from ${SOURCES[1].dir}",
 229                      target=target, source=source)
 230
 231 updateAction = env.Action(update_test, update_test_string)
 232
 233 def test_builder(env, ref_dir):
 234     """Define a test."""
 235
 236     (category, mode, name, _ref, isa, opsys, config) = ref_dir.split('/')
 237     assert(_ref == 'ref')
 238
 239     # target path (where test output goes) is the same except without
 240     # the 'ref' component
 241     tgt_dir = os.path.join(category, mode, name, isa, opsys, config)
 242
 243     # prepend file name with tgt_dir
 244     def tgt(f):
 245         return os.path.join(tgt_dir, f)
 246
 247     ref_stats = os.path.join(ref_dir, 'stats.txt')
 248     new_stats = tgt('stats.txt')
 249     status_file = tgt('status')
 250
 251     env.Command([status_file],
 252                 [env.M5Binary, 'run.py', ref_stats],
 253                 testAction)
 254
 255     # phony target to echo status
 256     if GetOption('update_ref'):
 257         p = env.Command(tgt('_update'),
 258                         [ref_stats, new_stats, status_file],
 259                         updateAction)
 260     else:
 261         p = env.Command(tgt('_print'), [status_file], printAction)
 262
 263     env.AlwaysBuild(p)
 264
 265
 266 # Figure out applicable configs based on build type
 267 configs = []
 268 if env['TARGET_ISA'] == 'alpha':
 269     configs += ['tsunami-simple-atomic',
 270                 'tsunami-simple-timing',
 271                 'tsunami-simple-atomic-dual',
 272                 'tsunami-simple-timing-dual',
 273                 'twosys-tsunami-simple-atomic',
 274                 'tsunami-o3', 'tsunami-o3-dual',
 275                 'tsunami-inorder']
 276 if env['TARGET_ISA'] == 'sparc':
 277     configs += ['t1000-simple-atomic',
 278                 't1000-simple-timing']
 279 if env['TARGET_ISA'] == 'arm':
 280     configs += ['realview-simple-atomic',
 281                 'realview-simple-atomic-dual',
 282                 'realview-simple-timing',
 283                 'realview-simple-timing-dual',
 284                 'realview-o3',
 285                 'realview-o3-dual']
 286 if env['TARGET_ISA'] == 'x86':
 287     configs += ['pc-simple-atomic',
 288                 'pc-simple-timing',
 289                 'pc-o3-timing']
 290
 291 configs += ['simple-atomic', 'simple-timing', 'o3-timing', 'memtest',
 292             'simple-atomic-mp', 'simple-timing-mp', 'o3-timing-mp',
 293             'inorder-timing', 'rubytest']
 294
 295 if env['PROTOCOL'] != 'None':
 296     if env['PROTOCOL'] == 'MI_example':
 297         configs += [c + "-ruby" for c in configs]
 298     else:
 299         configs = [c + "-ruby-" + env['PROTOCOL'] for c in configs]
 300
 301 cwd = os.getcwd()
 302 os.chdir(str(Dir('.').srcdir))
 303 for config in configs:
 304     dirs = glob.glob('*/*/*/ref/%s/*/%s' % (env['TARGET_ISA'], config))
 305     for d in dirs:
 306         if not os.path.exists(os.path.join(d, 'skip')):
 307             test_builder(env, d)
 308 os.chdir(cwd)