Mem: Use cycles to express cache-related latencies
[gem5.git] / tests / configs / pc-simple-timing.py
1 # Copyright (c) 2006-2007 The Regents of The University of Michigan
2 # All rights reserved.
3 #
4 # Redistribution and use in source and binary forms, with or without
5 # modification, are permitted provided that the following conditions are
6 # met: redistributions of source code must retain the above copyright
7 # notice, this list of conditions and the following disclaimer;
8 # redistributions in binary form must reproduce the above copyright
9 # notice, this list of conditions and the following disclaimer in the
10 # documentation and/or other materials provided with the distribution;
11 # neither the name of the copyright holders nor the names of its
12 # contributors may be used to endorse or promote products derived from
13 # this software without specific prior written permission.
14 #
15 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
16 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
17 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
18 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
19 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
20 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
21 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
25 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 #
27 # Authors: Steve Reinhardt
28
29 import m5
30 from m5.objects import *
31 m5.util.addToPath('../configs/common')
32 from Benchmarks import SysConfig
33 import FSConfig
34
35
36 mem_size = '128MB'
37
38 # --------------------
39 # Base L1 Cache
40 # ====================
41
42 class L1(BaseCache):
43 hit_latency = 2
44 response_latency = 2
45 block_size = 64
46 mshrs = 4
47 tgts_per_mshr = 8
48 is_top_level = True
49
50 # ----------------------
51 # Base L2 Cache
52 # ----------------------
53
54 class L2(BaseCache):
55 block_size = 64
56 hit_latency = 20
57 response_latency = 20
58 mshrs = 92
59 tgts_per_mshr = 16
60 write_buffers = 8
61
62 # ---------------------
63 # Page table walker cache
64 # ---------------------
65 class PageTableWalkerCache(BaseCache):
66 assoc = 2
67 block_size = 64
68 hit_latency = 2
69 response_latency = 2
70 mshrs = 10
71 size = '1kB'
72 tgts_per_mshr = 12
73
74 # ---------------------
75 # I/O Cache
76 # ---------------------
77 class IOCache(BaseCache):
78 assoc = 8
79 block_size = 64
80 hit_latency = 50
81 response_latency = 50
82 mshrs = 20
83 size = '1kB'
84 tgts_per_mshr = 12
85 addr_ranges = [AddrRange(0, size=mem_size)]
86 forward_snoops = False
87
88 #cpu
89 cpu = TimingSimpleCPU(cpu_id=0)
90 #the system
91 mdesc = SysConfig(disk = 'linux-x86.img')
92 system = FSConfig.makeLinuxX86System('timing', mdesc = mdesc)
93 system.kernel = FSConfig.binary('x86_64-vmlinux-2.6.22.9')
94
95 system.cpu = cpu
96
97 #create the iocache
98 system.iocache = IOCache(clock = '1GHz')
99 system.iocache.cpu_side = system.iobus.master
100 system.iocache.mem_side = system.membus.slave
101
102 #connect up the cpu and caches
103 cpu.addTwoLevelCacheHierarchy(L1(size = '32kB', assoc = 1),
104 L1(size = '32kB', assoc = 4),
105 L2(size = '4MB', assoc = 8),
106 PageTableWalkerCache(),
107 PageTableWalkerCache())
108 # create the interrupt controller
109 cpu.createInterruptController()
110 # connect cpu and caches to the rest of the system
111 cpu.connectAllPorts(system.membus)
112 # set the cpu clock along with the caches and l1-l2 bus
113 cpu.clock = '2GHz'
114
115 root = Root(full_system=True, system=system)
116 m5.ticks.setGlobalFrequency('1THz')
117