tests/long/10.linux-boot/ref/arm/linux/realview-o3/system.terminal

   1 [    0.000000] Linux version 2.6.34-sysexplore (root@harpertown2) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-161) ) #10 Thu Sep 30 18:33:08 CDT 2010
   2 [    0.000000] CPU: ARMv7 Processor [350ff000] revision 0 (ARMv7), cr=10c53c7f
   3 [    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
   4 [    0.000000] Machine: ARM-RealView PBX
   5 [    0.000000] Ignoring unrecognised tag 0x00000000
   6 [    0.000000] Memory policy: ECC disabled, Data cache writeback
   7 [    0.000000] On node 0 totalpages: 32768
   8 [    0.000000]   DMA zone: 256 pages used for memmap
   9 [    0.000000]   DMA zone: 0 pages reserved
  10 [    0.000000]   DMA zone: 32512 pages, LIFO batch:7
  11 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
  12 [    0.000000] Kernel command line: earlyprintk mem=128MB console=ttyAMA0 lpj=19988480 norandmaps slram=slram0,0x8000000,+0x8000000 mtdparts=slram0:- rw loglevel=8 root=/dev/mtdblock0
  13 [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  14 [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  15 [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  16 [    0.000000] Memory: 128MB = 128MB total
  17 [    0.000000] Memory: 126868k/126868k available, 4204k reserved, 0K highmem
  18 [    0.000000] Virtual kernel memory layout:
  19 [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  20 [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  21 [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
  22 [    0.000000]     vmalloc : 0xc8800000 - 0xf8000000   ( 760 MB)
  23 [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
  24 [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  25 [    0.000000]       .init : 0xc0008000 - 0xc0019000   (  68 kB)
  26 [    0.000000]       .text : 0xc0019000 - 0xc01c6000   (1716 kB)
  27 [    0.000000]       .data : 0xc01d2000 - 0xc01e47c0   (  74 kB)
  28 [    0.000000] Hierarchical RCU implementation.
  29 [    0.000000] NR_IRQS:128
  30 [    0.000000] Console: colour dummy device 80x30
  31 [   82.092962] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
  32 [  140.187085] Mount-cache hash table entries: 512
  33 [  148.239326] CPU: Testing write buffer coherency: ok
  34 [   84.455016] PL310/L2C-310 cache controller enabled (ffffffff)
  35 [   31.995763] Serial: AMBA PL011 UART driver
  36 [   45.340859] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a AMBA/PL011
  37 [  155.503303] console [ttyAMA0] enabled
  38 [   19.845827] bio: create slab <bio-0> at 0
  39 [   54.309429] Switching to clocksource timer3
  40 [   58.769688] msgmni has been set to 247
  41 [  130.265675] io scheduler noop registered (default)
  42 [   68.260024] brd: module loaded
  43 [  176.531211] loop: module loaded
  44 [   56.643686] slram: devname = slram0
  45 [  108.209722] slram: devstart = 0x8000000
  46 [   24.126936] slram: devlength = +0x8000000
  47 [   57.317448] slram: devname=slram0, devstart=0x8000000, devlength=0x8000000
  48 [  144.960873] slram: Registered device slram0 from 131072KiB to 262144KiB
  49 [    7.564591] slram: Mapped from 0xc9000000 to 0xd1000000
  50 [    3.505692] mice: PS/2 mouse device common for all mice
  51 [   24.257037] oprofile: using arm/armv7
  52 [   48.449042] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
  53