Change Log: DRAMPower v4.0 - * DRAMPower can now be compiled as a library. This enables a user to access the tool through an API and log commands and their corresponding time stamps, removing the need to store large command traces on disk. In addition, cycle counting variables have been changed to int64 to support longer simulations. The library can be compiled without Xerces to remove an optional dependency and reduce the size of the binary. * Improved robustness. The latest build is automatically checked out on a test server, compiled, and tested to verify that the output matches an expected reference. The code is also compiled with a large number of warning flags enabled and treats all warnings as errors. * Bug fix: Fixed bug in io/termination energy calculation. * Bug fix: Fixed bug in calculation of auto precharge cycle. DRAMPower v3.1 - * Added IO and Termination Power measures from Micron's DRAM Power Calculator, for all supported DRAM generations. In the case of Wide IO DRAMs, these measures are already included in the provided current specifications. This feature enables support for multi-rank DRAM DIMMs (DDR2/3/4) and stacking of multiple Wide IO DRAM dies (equivalent to ranks). To indicate use of multi-rank DRAMs or multiple Wide IO DRAM dies/layers, the 'nbrOfRanks' parameter in the memory specification XMLs can be employed. Note: The DRAM command scheduler does not support multi-rank/multi-die DRAMs yet. Only the power estimation component of DRAMPower has been updated to support them. The current measures for dual-rank DRAMs only reflect those for the active rank and not the idle rank. The default state of the idle rank is assumed to be the same as the current memory state, for background power estimation. Hence, rank information in the command trace is not required. * Added warning messages: New warning messages are provided, to identify if the memory or bank state is inconsistent in the user-defined traces. Towards this, a state check is performed on every memory command issued. * Improved run-time options: Users can now point directly to the memory specification XML, instead of just the memory ID. Also, users can optionally include IO and termination power estimates (for both single and dual rank DRAMs) using '-r' flag in the command line options. * Bug fixes: (1) Refresh handler in the DRAM Command Scheduler was kept ON in the Self-Refresh mode, when it can be turned OFF. This bug has now been fixed. (2) Precharge All (PREA) always considered precharging of all banks. It has now been modified to consider precharging of the open/active banks alone. DRAMPower v3.0 - * Added support for LPDDR3 and DDR4 memories, besides the already supported DDR2/DDR3, LPDDR/LPDDR2 and WIDE IO DRAM memories. * Added DRAM Command Scheduler: To support users of DRAMPower without access to DRAM controllers, we have added a simple DRAM command scheduler that dynamically schedules DRAM commands as if it were a memory controller. The scheduler assumes closed-page policy, employs ASAP scheduling for DRAM commands (i.e. schedules commands as soon as timing constraints are met), performs FCFS scheduling on DRAM transactions and supports all the different DRAM generations supported by the power model. The generated DRAM command schedule is also analyzable for real-time applications. Users can also select speculative usage of power-down or self-refresh modes (if needed) for idle periods between transactions. It should be noted that using this command scheduler is optional and it can be (de-)selected during run-time and users can switch back to the previously used DRAM command interface as in the earlier versions. * Improved run-time options: Users can specify the memory and the trace file to be used by DRAMPower using command line options. Additionally, if the DRAM command scheduler is being used, the users can specify the degree of bank interleaving required, the request size and power-down or self-refresh options. Also, for DDR4 memories the bank group interleaving can be specified using command line options. * Bug fixes: (1) For command traces ending with a RD/WR/RDA/WRA command, the tool did not consider completion of operations when estimating the total trace energy. The missing cycles are now taken into account. (2) The IDD5 (REF current) specification for WIDE IO SDR memory specifications only included 2 banks for refreshes instead of all four. We would like to thank David Roberts from AMD for spotting the issue in our DATE'13 article. These measures have been updated. (3) When estimating precharge cycle for commands with auto-precharge, (RDA/WRA), the command analysis tool employed the last activation cycle in the entire DRAM instead of the particular DRAM bank. This bug has been fixed in this release. DRAMPower v2.1 - * Added support for variation-aware power estimation, for a selection of DDR3 memories manufactured using 50nm process technology, based on the Monte-Carlo analysis presented in our DAC'13 article. DRAMPower v2.0 - * Added support for LPDDR/LPDDR2 and WIDE IO DRAM memories, besides the already supported DDR2/DDR3 memories. * Faster analysis: The trace analysis component in DRAMPower v2.0 triggers the evaluation only during memory state transitions (between active, precharged, active and precharged power-down, refresh, self-refresh and power-up states) and not on every clock cycle, as was the case till the last version. This optimization speeds up the power simulations using DRAMPower by several times over cycle-accurate analysis, resulting in fast power analysis, without affecting the accuracy of the trace analysis or the reported power and energy estimates. * Verification effort: Our power model was verified by the Microelectronic System Design group at TU Kaiserslautern using circuit-level SPICE simulations of a DRAM cross-section. As a result of this verification effort, a couple of power equations have been modified for Refresh and Self-refresh operations. The difference between the power and energy estimates reported by our updated model and the equivalent circuit-level simulations is < 2% for all memory operations of any granularity for all memories supported by DRAMPower. DRAMPower v1.2 - * Supports different power-down and self-refresh modes in DDR2 and DDR3 DRAM memories. * Bug fix: Refresh power consumption equation in DRAMPower v1, incorrectly subtracted IDD2n (precharge background current) instead of IDD3n (active background current) from IDD5 (total refresh current). This error has been rectified in this version. DRAMPower v1.0 - * Performs cycle-accurate memory command trace analysis and estimates power and energy consumption numbers for the trace. * It supports the basic memory operations like read, write, refresh, activate and (auto) precharge in DDR2 and DDR3 memories.