# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile.am -- Backtrace Makefile.
# Copyright (C) 2012-2018 Free Software Foundation, Inc.

# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:

#     (1) Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.

#     (2) Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in
#     the documentation and/or other materials provided with the
#     distribution.

#     (3) The name of the author may not be used to
#     endorse or promote products derived from this software without
#     specific prior written permission.

# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
check_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2) $(am__EXEEXT_3)
@NATIVE_TRUE@am__append_1 = btest stest ztest edtest
@HAVE_ZLIB_TRUE@@NATIVE_TRUE@am__append_2 = -lz
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@am__append_3 = ttest
@HAVE_OBJCOPY_DEBUGLINK_TRUE@@NATIVE_TRUE@am__append_4 = dtest
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@am__append_5 = ctestg ctesta
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/cet.m4 \
	$(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/stdint.m4 \
	$(top_srcdir)/../config/unwind_ipinfo.m4 \
	$(top_srcdir)/../config/warnings.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
	$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = backtrace-supported.h
CONFIG_CLEAN_VPATH_FILES =
LTLIBRARIES = $(noinst_LTLIBRARIES)
am__DEPENDENCIES_1 =
am_libbacktrace_la_OBJECTS = atomic.lo dwarf.lo fileline.lo posix.lo \
	print.lo sort.lo state.lo
libbacktrace_la_OBJECTS = $(am_libbacktrace_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
@NATIVE_TRUE@am__EXEEXT_1 = btest$(EXEEXT) stest$(EXEEXT) \
@NATIVE_TRUE@	ztest$(EXEEXT) edtest$(EXEEXT)
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@am__EXEEXT_2 = ttest$(EXEEXT)
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@am__EXEEXT_3 =  \
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@	ctestg$(EXEEXT) \
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@	ctesta$(EXEEXT)
@NATIVE_TRUE@am_btest_OBJECTS = btest-btest.$(OBJEXT) \
@NATIVE_TRUE@	btest-testlib.$(OBJEXT)
btest_OBJECTS = $(am_btest_OBJECTS)
@NATIVE_TRUE@btest_DEPENDENCIES = libbacktrace.la
btest_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(btest_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@am_ctesta_OBJECTS = ctesta-btest.$(OBJEXT) \
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@	ctesta-testlib.$(OBJEXT)
ctesta_OBJECTS = $(am_ctesta_OBJECTS)
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctesta_DEPENDENCIES =  \
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@	libbacktrace.la
ctesta_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(ctesta_CFLAGS) $(CFLAGS) \
	$(ctesta_LDFLAGS) $(LDFLAGS) -o $@
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@am_ctestg_OBJECTS = ctestg-btest.$(OBJEXT) \
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@	ctestg-testlib.$(OBJEXT)
ctestg_OBJECTS = $(am_ctestg_OBJECTS)
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctestg_DEPENDENCIES =  \
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@	libbacktrace.la
ctestg_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(ctestg_CFLAGS) $(CFLAGS) \
	$(ctestg_LDFLAGS) $(LDFLAGS) -o $@
@NATIVE_TRUE@am_edtest_OBJECTS = edtest.$(OBJEXT) \
@NATIVE_TRUE@	edtest2_build.$(OBJEXT) testlib.$(OBJEXT)
edtest_OBJECTS = $(am_edtest_OBJECTS)
@NATIVE_TRUE@edtest_DEPENDENCIES = libbacktrace.la
@NATIVE_TRUE@am_stest_OBJECTS = stest.$(OBJEXT)
stest_OBJECTS = $(am_stest_OBJECTS)
@NATIVE_TRUE@stest_DEPENDENCIES = libbacktrace.la
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@am_ttest_OBJECTS =  \
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@	ttest-ttest.$(OBJEXT) \
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@	ttest-testlib.$(OBJEXT)
ttest_OBJECTS = $(am_ttest_OBJECTS)
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@ttest_DEPENDENCIES = libbacktrace.la
ttest_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(ttest_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
@NATIVE_TRUE@am_ztest_OBJECTS = ztest-ztest.$(OBJEXT) \
@NATIVE_TRUE@	ztest-testlib.$(OBJEXT)
ztest_OBJECTS = $(am_ztest_OBJECTS)
@NATIVE_TRUE@ztest_DEPENDENCIES = libbacktrace.la \
@NATIVE_TRUE@	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
ztest_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(ztest_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = $(libbacktrace_la_SOURCES) $(EXTRA_libbacktrace_la_SOURCES) \
	$(btest_SOURCES) $(ctesta_SOURCES) $(ctestg_SOURCES) \
	$(edtest_SOURCES) $(stest_SOURCES) $(ttest_SOURCES) \
	$(ztest_SOURCES)
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
	$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
AM_RECURSIVE_TARGETS = cscope check recheck
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red=''; \
    grn=''; \
    lgn=''; \
    blu=''; \
    mgn=''; \
    brg=''; \
    std=''; \
  fi; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
ACLOCAL = @ACLOCAL@
ALLOC_FILE = @ALLOC_FILE@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BACKTRACE_FILE = @BACKTRACE_FILE@
BACKTRACE_SUPPORTED = @BACKTRACE_SUPPORTED@
BACKTRACE_SUPPORTS_DATA = @BACKTRACE_SUPPORTS_DATA@
BACKTRACE_SUPPORTS_THREADS = @BACKTRACE_SUPPORTS_THREADS@
BACKTRACE_USES_MALLOC = @BACKTRACE_USES_MALLOC@
CC = @CC@
CFLAGS = @CFLAGS@
CLOCK_GETTIME_LINK = @CLOCK_GETTIME_LINK@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTRA_FLAGS = @EXTRA_FLAGS@
FGREP = @FGREP@
FORMAT_FILE = @FORMAT_FILE@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJCOPY = @OBJCOPY@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PIC_FLAG = @PIC_FLAG@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
VIEW_FILE = @VIEW_FILE@
WARN_FLAGS = @WARN_FLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I .. -I ../config
AM_CPPFLAGS = -I $(top_srcdir)/../include -I $(top_srcdir)/../libgcc \
	-I ../libgcc

AM_CFLAGS = $(EXTRA_FLAGS) $(WARN_FLAGS) $(PIC_FLAG)
noinst_LTLIBRARIES = libbacktrace.la
libbacktrace_la_SOURCES = \
	backtrace.h \
	atomic.c \
	dwarf.c \
	fileline.c \
	internal.h \
	posix.c \
	print.c \
	sort.c \
	state.c

BACKTRACE_FILES = \
	backtrace.c \
	simple.c \
	nounwind.c

FORMAT_FILES = \
	elf.c \
	pecoff.c \
	unknown.c \
	xcoff.c

VIEW_FILES = \
	read.c \
	mmapio.c

ALLOC_FILES = \
	alloc.c \
	mmap.c

EXTRA_libbacktrace_la_SOURCES = \
	$(BACKTRACE_FILES) \
	$(FORMAT_FILES) \
	$(VIEW_FILES) \
	$(ALLOC_FILES)

libbacktrace_la_LIBADD = \
	$(BACKTRACE_FILE) \
	$(FORMAT_FILE) \
	$(VIEW_FILE) \
	$(ALLOC_FILE)

libbacktrace_la_DEPENDENCIES = $(libbacktrace_la_LIBADD)
TESTS = $(check_PROGRAMS) $(am__append_4)
@NATIVE_TRUE@btest_SOURCES = btest.c testlib.c
@NATIVE_TRUE@btest_CFLAGS = $(AM_CFLAGS) -g -O
@NATIVE_TRUE@btest_LDADD = libbacktrace.la
@NATIVE_TRUE@stest_SOURCES = stest.c
@NATIVE_TRUE@stest_LDADD = libbacktrace.la
@NATIVE_TRUE@ztest_SOURCES = ztest.c testlib.c
@NATIVE_TRUE@ztest_CFLAGS = -DSRCDIR=\"$(srcdir)\"
@NATIVE_TRUE@ztest_LDADD = libbacktrace.la $(am__append_2) \
@NATIVE_TRUE@	$(CLOCK_GETTIME_LINK)
@NATIVE_TRUE@edtest_SOURCES = edtest.c edtest2_build.c testlib.c
@NATIVE_TRUE@edtest_LDADD = libbacktrace.la
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@ttest_SOURCES = ttest.c testlib.c
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@ttest_CFLAGS = $(AM_CFLAGS) -pthread
@HAVE_PTHREAD_TRUE@@NATIVE_TRUE@ttest_LDADD = libbacktrace.la
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctestg_SOURCES = btest.c testlib.c
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctestg_CFLAGS = $(AM_CFLAGS) -g
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctestg_LDFLAGS = -Wl,--compress-debug-sections=zlib-gnu
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctestg_LDADD = libbacktrace.la
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctesta_SOURCES = btest.c testlib.c
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctesta_CFLAGS = $(AM_CFLAGS) -g
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctesta_LDFLAGS = -Wl,--compress-debug-sections=zlib-gabi
@HAVE_COMPRESSED_DEBUG_TRUE@@NATIVE_TRUE@ctesta_LDADD = libbacktrace.la

# We can't use automake's automatic dependency tracking, because it
# breaks when using bootstrap-lean.  Automatic dependency tracking
# with GCC bootstrap will cause some of the objects to depend on
# header files in prev-gcc/include, e.g., stddef.h and stdarg.h.  When
# using bootstrap-lean, prev-gcc is removed after each stage.  When
# running "make install", those header files will be gone, causing the
# library to be rebuilt at install time.  That may not succeed.

# These manual dependencies do not include dependencies on unwind.h,
# even though that is part of GCC, because where to find it depends on
# whether we are being built as a host library or a target library.
INCDIR = $(top_srcdir)/../include
MULTISRCTOP = 
MULTIBUILDTOP = 
MULTIDIRS = 
MULTISUBDIR = 
MULTIDO = true
MULTICLEAN = true
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/../multilib.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign --ignore-deps Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/../multilib.am $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
backtrace-supported.h: $(top_builddir)/config.status $(srcdir)/backtrace-supported.h.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

libbacktrace.la: $(libbacktrace_la_OBJECTS) $(libbacktrace_la_DEPENDENCIES) $(EXTRA_libbacktrace_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(LINK)  $(libbacktrace_la_OBJECTS) $(libbacktrace_la_LIBADD) $(LIBS)

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

btest$(EXEEXT): $(btest_OBJECTS) $(btest_DEPENDENCIES) $(EXTRA_btest_DEPENDENCIES) 
	@rm -f btest$(EXEEXT)
	$(AM_V_CCLD)$(btest_LINK) $(btest_OBJECTS) $(btest_LDADD) $(LIBS)

ctesta$(EXEEXT): $(ctesta_OBJECTS) $(ctesta_DEPENDENCIES) $(EXTRA_ctesta_DEPENDENCIES) 
	@rm -f ctesta$(EXEEXT)
	$(AM_V_CCLD)$(ctesta_LINK) $(ctesta_OBJECTS) $(ctesta_LDADD) $(LIBS)

ctestg$(EXEEXT): $(ctestg_OBJECTS) $(ctestg_DEPENDENCIES) $(EXTRA_ctestg_DEPENDENCIES) 
	@rm -f ctestg$(EXEEXT)
	$(AM_V_CCLD)$(ctestg_LINK) $(ctestg_OBJECTS) $(ctestg_LDADD) $(LIBS)

edtest$(EXEEXT): $(edtest_OBJECTS) $(edtest_DEPENDENCIES) $(EXTRA_edtest_DEPENDENCIES) 
	@rm -f edtest$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(edtest_OBJECTS) $(edtest_LDADD) $(LIBS)

stest$(EXEEXT): $(stest_OBJECTS) $(stest_DEPENDENCIES) $(EXTRA_stest_DEPENDENCIES) 
	@rm -f stest$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(stest_OBJECTS) $(stest_LDADD) $(LIBS)

ttest$(EXEEXT): $(ttest_OBJECTS) $(ttest_DEPENDENCIES) $(EXTRA_ttest_DEPENDENCIES) 
	@rm -f ttest$(EXEEXT)
	$(AM_V_CCLD)$(ttest_LINK) $(ttest_OBJECTS) $(ttest_LDADD) $(LIBS)

ztest$(EXEEXT): $(ztest_OBJECTS) $(ztest_DEPENDENCIES) $(EXTRA_ztest_DEPENDENCIES) 
	@rm -f ztest$(EXEEXT)
	$(AM_V_CCLD)$(ztest_LINK) $(ztest_OBJECTS) $(ztest_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

.c.o:
	$(AM_V_CC)$(COMPILE) -c -o $@ $<

.c.obj:
	$(AM_V_CC)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
	$(AM_V_CC)$(LTCOMPILE) -c -o $@ $<

btest-btest.o: btest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-btest.o `test -f 'btest.c' || echo '$(srcdir)/'`btest.c

btest-btest.obj: btest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-btest.obj `if test -f 'btest.c'; then $(CYGPATH_W) 'btest.c'; else $(CYGPATH_W) '$(srcdir)/btest.c'; fi`

btest-testlib.o: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-testlib.o `test -f 'testlib.c' || echo '$(srcdir)/'`testlib.c

btest-testlib.obj: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(btest_CFLAGS) $(CFLAGS) -c -o btest-testlib.obj `if test -f 'testlib.c'; then $(CYGPATH_W) 'testlib.c'; else $(CYGPATH_W) '$(srcdir)/testlib.c'; fi`

ctesta-btest.o: btest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ctesta_CFLAGS) $(CFLAGS) -c -o ctesta-btest.o `test -f 'btest.c' || echo '$(srcdir)/'`btest.c

ctesta-btest.obj: btest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ctesta_CFLAGS) $(CFLAGS) -c -o ctesta-btest.obj `if test -f 'btest.c'; then $(CYGPATH_W) 'btest.c'; else $(CYGPATH_W) '$(srcdir)/btest.c'; fi`

ctesta-testlib.o: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ctesta_CFLAGS) $(CFLAGS) -c -o ctesta-testlib.o `test -f 'testlib.c' || echo '$(srcdir)/'`testlib.c

ctesta-testlib.obj: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ctesta_CFLAGS) $(CFLAGS) -c -o ctesta-testlib.obj `if test -f 'testlib.c'; then $(CYGPATH_W) 'testlib.c'; else $(CYGPATH_W) '$(srcdir)/testlib.c'; fi`

ctestg-btest.o: btest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ctestg_CFLAGS) $(CFLAGS) -c -o ctestg-btest.o `test -f 'btest.c' || echo '$(srcdir)/'`btest.c

ctestg-btest.obj: btest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ctestg_CFLAGS) $(CFLAGS) -c -o ctestg-btest.obj `if test -f 'btest.c'; then $(CYGPATH_W) 'btest.c'; else $(CYGPATH_W) '$(srcdir)/btest.c'; fi`

ctestg-testlib.o: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ctestg_CFLAGS) $(CFLAGS) -c -o ctestg-testlib.o `test -f 'testlib.c' || echo '$(srcdir)/'`testlib.c

ctestg-testlib.obj: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ctestg_CFLAGS) $(CFLAGS) -c -o ctestg-testlib.obj `if test -f 'testlib.c'; then $(CYGPATH_W) 'testlib.c'; else $(CYGPATH_W) '$(srcdir)/testlib.c'; fi`

ttest-ttest.o: ttest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ttest_CFLAGS) $(CFLAGS) -c -o ttest-ttest.o `test -f 'ttest.c' || echo '$(srcdir)/'`ttest.c

ttest-ttest.obj: ttest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ttest_CFLAGS) $(CFLAGS) -c -o ttest-ttest.obj `if test -f 'ttest.c'; then $(CYGPATH_W) 'ttest.c'; else $(CYGPATH_W) '$(srcdir)/ttest.c'; fi`

ttest-testlib.o: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ttest_CFLAGS) $(CFLAGS) -c -o ttest-testlib.o `test -f 'testlib.c' || echo '$(srcdir)/'`testlib.c

ttest-testlib.obj: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ttest_CFLAGS) $(CFLAGS) -c -o ttest-testlib.obj `if test -f 'testlib.c'; then $(CYGPATH_W) 'testlib.c'; else $(CYGPATH_W) '$(srcdir)/testlib.c'; fi`

ztest-ztest.o: ztest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ztest_CFLAGS) $(CFLAGS) -c -o ztest-ztest.o `test -f 'ztest.c' || echo '$(srcdir)/'`ztest.c

ztest-ztest.obj: ztest.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ztest_CFLAGS) $(CFLAGS) -c -o ztest-ztest.obj `if test -f 'ztest.c'; then $(CYGPATH_W) 'ztest.c'; else $(CYGPATH_W) '$(srcdir)/ztest.c'; fi`

ztest-testlib.o: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ztest_CFLAGS) $(CFLAGS) -c -o ztest-testlib.o `test -f 'testlib.c' || echo '$(srcdir)/'`testlib.c

ztest-testlib.obj: testlib.c
	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ztest_CFLAGS) $(CFLAGS) -c -o ztest-testlib.obj `if test -f 'testlib.c'; then $(CYGPATH_W) 'testlib.c'; else $(CYGPATH_W) '$(srcdir)/testlib.c'; fi`

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-am

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS:
	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(check_PROGRAMS)
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
btest.log: btest$(EXEEXT)
	@p='btest$(EXEEXT)'; \
	b='btest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
stest.log: stest$(EXEEXT)
	@p='stest$(EXEEXT)'; \
	b='stest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
ztest.log: ztest$(EXEEXT)
	@p='ztest$(EXEEXT)'; \
	b='ztest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
edtest.log: edtest$(EXEEXT)
	@p='edtest$(EXEEXT)'; \
	b='edtest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
ttest.log: ttest$(EXEEXT)
	@p='ttest$(EXEEXT)'; \
	b='ttest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
ctestg.log: ctestg$(EXEEXT)
	@p='ctestg$(EXEEXT)'; \
	b='ctestg'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
ctesta.log: ctesta$(EXEEXT)
	@p='ctesta$(EXEEXT)'; \
	b='ctesta'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
dtest.log: dtest
	@p='dtest'; \
	b='dtest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(LTLIBRARIES) config.h all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \
	clean-noinstLTLIBRARIES mostlyclean-am

distclean: distclean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-local distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-exec-local

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool mostlyclean-local

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: all check-am install-am install-strip

.PHONY: CTAGS GTAGS TAGS all all-am all-local am--refresh check \
	check-TESTS check-am clean clean-checkPROGRAMS clean-cscope \
	clean-generic clean-libtool clean-local \
	clean-noinstLTLIBRARIES cscope cscopelist-am ctags ctags-am \
	distclean distclean-compile distclean-generic distclean-hdr \
	distclean-libtool distclean-local distclean-tags dvi dvi-am \
	html html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-exec-local install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am

.PRECIOUS: Makefile


@NATIVE_TRUE@edtest2_build.c: gen_edtest2_build; @true
@NATIVE_TRUE@gen_edtest2_build: $(srcdir)/edtest2.c
@NATIVE_TRUE@	cat $(srcdir)/edtest2.c > tmp-edtest2_build.c
@NATIVE_TRUE@	$(SHELL) $(srcdir)/../move-if-change tmp-edtest2_build.c edtest2_build.c
@NATIVE_TRUE@	echo timestamp > $@

@HAVE_OBJCOPY_DEBUGLINK_TRUE@@NATIVE_TRUE@dtest: btest
@HAVE_OBJCOPY_DEBUGLINK_TRUE@@NATIVE_TRUE@	$(OBJCOPY) --only-keep-debug btest btest.debug
@HAVE_OBJCOPY_DEBUGLINK_TRUE@@NATIVE_TRUE@	$(OBJCOPY) --strip-debug --add-gnu-debuglink=btest.debug btest dtest
alloc.lo: config.h backtrace.h internal.h
backtrace.lo: config.h backtrace.h internal.h
btest.lo: (INCDIR)/filenames.h backtrace.h backtrace-supported.h
dwarf.lo: config.h $(INCDIR)/dwarf2.h $(INCDIR)/dwarf2.def \
	$(INCDIR)/filenames.h backtrace.h internal.h
elf.lo: config.h backtrace.h internal.h
fileline.lo: config.h backtrace.h internal.h
mmap.lo: config.h backtrace.h internal.h
mmapio.lo: config.h backtrace.h internal.h
nounwind.lo: config.h internal.h
pecoff.lo: config.h backtrace.h internal.h
posix.lo: config.h backtrace.h internal.h
print.lo: config.h backtrace.h internal.h
read.lo: config.h backtrace.h internal.h
simple.lo: config.h backtrace.h internal.h
sort.lo: config.h backtrace.h internal.h
stest.lo: config.h backtrace.h internal.h
state.lo: config.h backtrace.h backtrace-supported.h internal.h
unknown.lo: config.h backtrace.h internal.h
xcoff.lo: config.h backtrace.h internal.h

# GNU Make needs to see an explicit $(MAKE) variable in the command it
# runs to enable its job server during parallel builds.  Hence the
# comments below.
all-multi:
	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
install-multi:
	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
mostlyclean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
maintainer-clean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)

.MAKE .PHONY: all-multi clean-multi distclean-multi install-am \
	      install-multi maintainer-clean-multi mostlyclean-multi

install-exec-local: install-multi

all-local: all-multi
mostlyclean-local: mostlyclean-multi
clean-local: clean-multi
distclean-local: distclean-multi
maintainer-clean-local: maintainer-clean-multi

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: