// Copyright 2009 The Go Authors. All rights reserved. // Use of this source code is governed by a BSD-style // license that can be found in the LICENSE file. package runtime import ( "runtime/internal/atomic" "runtime/internal/sys" "unsafe" ) // defined constants const ( // G status // // Beyond indicating the general state of a G, the G status // acts like a lock on the goroutine's stack (and hence its // ability to execute user code). // // If you add to this list, add to the list // of "okay during garbage collection" status // in mgcmark.go too. // _Gidle means this goroutine was just allocated and has not // yet been initialized. _Gidle = iota // 0 // _Grunnable means this goroutine is on a run queue. It is // not currently executing user code. The stack is not owned. _Grunnable // 1 // _Grunning means this goroutine may execute user code. The // stack is owned by this goroutine. It is not on a run queue. // It is assigned an M and a P. _Grunning // 2 // _Gsyscall means this goroutine is executing a system call. // It is not executing user code. The stack is owned by this // goroutine. It is not on a run queue. It is assigned an M. _Gsyscall // 3 // _Gwaiting means this goroutine is blocked in the runtime. // It is not executing user code. It is not on a run queue, // but should be recorded somewhere (e.g., a channel wait // queue) so it can be ready()d when necessary. The stack is // not owned *except* that a channel operation may read or // write parts of the stack under the appropriate channel // lock. Otherwise, it is not safe to access the stack after a // goroutine enters _Gwaiting (e.g., it may get moved). _Gwaiting // 4 // _Gmoribund_unused is currently unused, but hardcoded in gdb // scripts. _Gmoribund_unused // 5 // _Gdead means this goroutine is currently unused. It may be // just exited, on a free list, or just being initialized. It // is not executing user code. It may or may not have a stack // allocated. The G and its stack (if any) are owned by the M // that is exiting the G or that obtained the G from the free // list. _Gdead // 6 // _Genqueue_unused is currently unused. _Genqueue_unused // 7 // _Gcopystack means this goroutine's stack is being moved. It // is not executing user code and is not on a run queue. The // stack is owned by the goroutine that put it in _Gcopystack. _Gcopystack // 8 // _Gscan combined with one of the above states other than // _Grunning indicates that GC is scanning the stack. The // goroutine is not executing user code and the stack is owned // by the goroutine that set the _Gscan bit. // // _Gscanrunning is different: it is used to briefly block // state transitions while GC signals the G to scan its own // stack. This is otherwise like _Grunning. // // atomicstatus&~Gscan gives the state the goroutine will // return to when the scan completes. _Gscan = 0x1000 _Gscanrunnable = _Gscan + _Grunnable // 0x1001 _Gscanrunning = _Gscan + _Grunning // 0x1002 _Gscansyscall = _Gscan + _Gsyscall // 0x1003 _Gscanwaiting = _Gscan + _Gwaiting // 0x1004 ) const ( // P status _Pidle = iota _Prunning // Only this P is allowed to change from _Prunning. _Psyscall _Pgcstop _Pdead ) // Mutual exclusion locks. In the uncontended case, // as fast as spin locks (just a few user-level instructions), // but on the contention path they sleep in the kernel. // A zeroed Mutex is unlocked (no need to initialize each lock). type mutex struct { // Futex-based impl treats it as uint32 key, // while sema-based impl as M* waitm. // Used to be a union, but unions break precise GC. key uintptr } // sleep and wakeup on one-time events. // before any calls to notesleep or notewakeup, // must call noteclear to initialize the Note. // then, exactly one thread can call notesleep // and exactly one thread can call notewakeup (once). // once notewakeup has been called, the notesleep // will return. future notesleep will return immediately. // subsequent noteclear must be called only after // previous notesleep has returned, e.g. it's disallowed // to call noteclear straight after notewakeup. // // notetsleep is like notesleep but wakes up after // a given number of nanoseconds even if the event // has not yet happened. if a goroutine uses notetsleep to // wake up early, it must wait to call noteclear until it // can be sure that no other goroutine is calling // notewakeup. // // notesleep/notetsleep are generally called on g0, // notetsleepg is similar to notetsleep but is called on user g. type note struct { // Futex-based impl treats it as uint32 key, // while sema-based impl as M* waitm. // Used to be a union, but unions break precise GC. key uintptr } type funcval struct { fn uintptr // variable-size, fn-specific data here } // The representation of a non-empty interface. // See comment in iface.go for more details on this struct. type iface struct { tab unsafe.Pointer data unsafe.Pointer } // The representation of an empty interface. // See comment in iface.go for more details on this struct. type eface struct { _type *_type data unsafe.Pointer } func efaceOf(ep *interface{}) *eface { return (*eface)(unsafe.Pointer(ep)) } // The guintptr, muintptr, and puintptr are all used to bypass write barriers. // It is particularly important to avoid write barriers when the current P has // been released, because the GC thinks the world is stopped, and an // unexpected write barrier would not be synchronized with the GC, // which can lead to a half-executed write barrier that has marked the object // but not queued it. If the GC skips the object and completes before the // queuing can occur, it will incorrectly free the object. // // We tried using special assignment functions invoked only when not // holding a running P, but then some updates to a particular memory // word went through write barriers and some did not. This breaks the // write barrier shadow checking mode, and it is also scary: better to have // a word that is completely ignored by the GC than to have one for which // only a few updates are ignored. // // Gs and Ps are always reachable via true pointers in the // allgs and allp lists or (during allocation before they reach those lists) // from stack variables. // // Ms are always reachable via true pointers either from allm or // freem. Unlike Gs and Ps we do free Ms, so it's important that // nothing ever hold an muintptr across a safe point. // A guintptr holds a goroutine pointer, but typed as a uintptr // to bypass write barriers. It is used in the Gobuf goroutine state // and in scheduling lists that are manipulated without a P. // // The Gobuf.g goroutine pointer is almost always updated by assembly code. // In one of the few places it is updated by Go code - func save - it must be // treated as a uintptr to avoid a write barrier being emitted at a bad time. // Instead of figuring out how to emit the write barriers missing in the // assembly manipulation, we change the type of the field to uintptr, // so that it does not require write barriers at all. // // Goroutine structs are published in the allg list and never freed. // That will keep the goroutine structs from being collected. // There is never a time that Gobuf.g's contain the only references // to a goroutine: the publishing of the goroutine in allg comes first. // Goroutine pointers are also kept in non-GC-visible places like TLS, // so I can't see them ever moving. If we did want to start moving data // in the GC, we'd need to allocate the goroutine structs from an // alternate arena. Using guintptr doesn't make that problem any worse. type guintptr uintptr //go:nosplit func (gp guintptr) ptr() *g { return (*g)(unsafe.Pointer(gp)) } //go:nosplit func (gp *guintptr) set(g *g) { *gp = guintptr(unsafe.Pointer(g)) } //go:nosplit func (gp *guintptr) cas(old, new guintptr) bool { return atomic.Casuintptr((*uintptr)(unsafe.Pointer(gp)), uintptr(old), uintptr(new)) } // setGNoWB performs *gp = new without a write barrier. // For times when it's impractical to use a guintptr. //go:nosplit //go:nowritebarrier func setGNoWB(gp **g, new *g) { (*guintptr)(unsafe.Pointer(gp)).set(new) } type puintptr uintptr //go:nosplit func (pp puintptr) ptr() *p { return (*p)(unsafe.Pointer(pp)) } //go:nosplit func (pp *puintptr) set(p *p) { *pp = puintptr(unsafe.Pointer(p)) } // muintptr is a *m that is not tracked by the garbage collector. // // Because we do free Ms, there are some additional constrains on // muintptrs: // // 1. Never hold an muintptr locally across a safe point. // // 2. Any muintptr in the heap must be owned by the M itself so it can // ensure it is not in use when the last true *m is released. type muintptr uintptr //go:nosplit func (mp muintptr) ptr() *m { return (*m)(unsafe.Pointer(mp)) } //go:nosplit func (mp *muintptr) set(m *m) { *mp = muintptr(unsafe.Pointer(m)) } // setMNoWB performs *mp = new without a write barrier. // For times when it's impractical to use an muintptr. //go:nosplit //go:nowritebarrier func setMNoWB(mp **m, new *m) { (*muintptr)(unsafe.Pointer(mp)).set(new) } // sudog represents a g in a wait list, such as for sending/receiving // on a channel. // // sudog is necessary because the g ↔ synchronization object relation // is many-to-many. A g can be on many wait lists, so there may be // many sudogs for one g; and many gs may be waiting on the same // synchronization object, so there may be many sudogs for one object. // // sudogs are allocated from a special pool. Use acquireSudog and // releaseSudog to allocate and free them. type sudog struct { // The following fields are protected by the hchan.lock of the // channel this sudog is blocking on. shrinkstack depends on // this for sudogs involved in channel ops. g *g // isSelect indicates g is participating in a select, so // g.selectDone must be CAS'd to win the wake-up race. isSelect bool next *sudog prev *sudog elem unsafe.Pointer // data element (may point to stack) // The following fields are never accessed concurrently. // For channels, waitlink is only accessed by g. // For semaphores, all fields (including the ones above) // are only accessed when holding a semaRoot lock. acquiretime int64 releasetime int64 ticket uint32 parent *sudog // semaRoot binary tree waitlink *sudog // g.waiting list or semaRoot waittail *sudog // semaRoot c *hchan // channel } /* Not used by gccgo. type libcall struct { fn uintptr n uintptr // number of parameters args uintptr // parameters r1 uintptr // return values r2 uintptr err uintptr // error number } */ /* Not used by gccgo. // describes how to handle callback type wincallbackcontext struct { gobody unsafe.Pointer // go function to call argsize uintptr // callback arguments size (in bytes) restorestack uintptr // adjust stack on return by (in bytes) (386 only) cleanstack bool } */ /* Not used by gccgo. // Stack describes a Go execution stack. // The bounds of the stack are exactly [lo, hi), // with no implicit data structures on either side. type stack struct { lo uintptr hi uintptr } */ type g struct { // Stack parameters. // stack describes the actual stack memory: [stack.lo, stack.hi). // stackguard0 is the stack pointer compared in the Go stack growth prologue. // It is stack.lo+StackGuard normally, but can be StackPreempt to trigger a preemption. // stackguard1 is the stack pointer compared in the C stack growth prologue. // It is stack.lo+StackGuard on g0 and gsignal stacks. // It is ~0 on other goroutine stacks, to trigger a call to morestackc (and crash). // Not for gccgo: stack stack // offset known to runtime/cgo // Not for gccgo: stackguard0 uintptr // offset known to liblink // Not for gccgo: stackguard1 uintptr // offset known to liblink _panic *_panic // innermost panic - offset known to liblink _defer *_defer // innermost defer m *m // current m; offset known to arm liblink // Not for gccgo: sched gobuf syscallsp uintptr // if status==Gsyscall, syscallsp = sched.sp to use during gc syscallpc uintptr // if status==Gsyscall, syscallpc = sched.pc to use during gc // Not for gccgo: stktopsp uintptr // expected sp at top of stack, to check in traceback param unsafe.Pointer // passed parameter on wakeup atomicstatus uint32 // Not for gccgo: stackLock uint32 // sigprof/scang lock; TODO: fold in to atomicstatus goid int64 waitsince int64 // approx time when the g become blocked waitreason string // if status==Gwaiting schedlink guintptr preempt bool // preemption signal, duplicates stackguard0 = stackpreempt paniconfault bool // panic (instead of crash) on unexpected fault address preemptscan bool // preempted g does scan for gc gcscandone bool // g has scanned stack; protected by _Gscan bit in status gcscanvalid bool // false at start of gc cycle, true if G has not run since last scan; TODO: remove? throwsplit bool // must not split stack raceignore int8 // ignore race detection events sysblocktraced bool // StartTrace has emitted EvGoInSyscall about this goroutine sysexitticks int64 // cputicks when syscall has returned (for tracing) traceseq uint64 // trace event sequencer tracelastp puintptr // last P emitted an event for this goroutine lockedm muintptr sig uint32 writebuf []byte sigcode0 uintptr sigcode1 uintptr sigpc uintptr gopc uintptr // pc of go statement that created this goroutine startpc uintptr // pc of goroutine function // Not for gccgo: racectx uintptr waiting *sudog // sudog structures this g is waiting on (that have a valid elem ptr); in lock order // Not for gccgo: cgoCtxt []uintptr // cgo traceback context labels unsafe.Pointer // profiler labels timer *timer // cached timer for time.Sleep selectDone uint32 // are we participating in a select and did someone win the race? // Per-G GC state // gcAssistBytes is this G's GC assist credit in terms of // bytes allocated. If this is positive, then the G has credit // to allocate gcAssistBytes bytes without assisting. If this // is negative, then the G must correct this by performing // scan work. We track this in bytes to make it fast to update // and check for debt in the malloc hot path. The assist ratio // determines how this corresponds to scan work debt. gcAssistBytes int64 // Remaining fields are specific to gccgo. exception unsafe.Pointer // current exception being thrown isforeign bool // whether current exception is not from Go // When using split-stacks, these fields holds the results of // __splitstack_find while executing a syscall. These are used // by the garbage collector to scan the goroutine's stack. // // When not using split-stacks, g0 stacks are allocated by the // libc and other goroutine stacks are allocated by malg. // gcstack: unused (sometimes cleared) // gcstacksize: g0: 0; others: size of stack // gcnextsegment: unused // gcnextsp: current SP while executing a syscall // gcinitialsp: g0: top of stack; others: start of stack memory gcstack uintptr gcstacksize uintptr gcnextsegment uintptr gcnextsp uintptr gcinitialsp unsafe.Pointer // gcregs holds the register values while executing a syscall. // This is set by getcontext and scanned by the garbage collector. gcregs g_ucontext_t entry func(unsafe.Pointer) // goroutine function to run entryfn uintptr // function address passed to __go_go fromgogo bool // whether entered from gogo function scanningself bool // whether goroutine is scanning its own stack isSystemGoroutine bool // whether goroutine is a "system" goroutine traceback *tracebackg // stack traceback buffer context g_ucontext_t // saved context for setcontext stackcontext [10]uintptr // split-stack context } type m struct { g0 *g // goroutine with scheduling stack // Not for gccgo: morebuf gobuf // gobuf arg to morestack // Not for gccgo: divmod uint32 // div/mod denominator for arm - known to liblink // Fields not known to debuggers. procid uint64 // for debuggers, but offset not hard-coded gsignal *g // signal-handling g // Not for gccgo: goSigStack gsignalStack // Go-allocated signal handling stack sigmask sigset // storage for saved signal mask // Not for gccgo: tls [6]uintptr // thread-local storage (for x86 extern register) mstartfn func() curg *g // current running goroutine caughtsig guintptr // goroutine running during fatal signal p puintptr // attached p for executing go code (nil if not executing go code) nextp puintptr id int64 mallocing int32 throwing int32 preemptoff string // if != "", keep curg running on this m locks int32 softfloat int32 dying int32 profilehz int32 helpgc int32 spinning bool // m is out of work and is actively looking for work blocked bool // m is blocked on a note inwb bool // m is executing a write barrier newSigstack bool // minit on C thread called sigaltstack printlock int8 incgo bool // m is executing a cgo call freeWait uint32 // if == 0, safe to free g0 and delete m (atomic) fastrand [2]uint32 needextram bool traceback uint8 ncgocall uint64 // number of cgo calls in total ncgo int32 // number of cgo calls currently in progress // Not for gccgo: cgoCallersUse uint32 // if non-zero, cgoCallers in use temporarily // Not for gccgo: cgoCallers *cgoCallers // cgo traceback if crashing in cgo call park note alllink *m // on allm schedlink muintptr mcache *mcache lockedg guintptr createstack [32]location // stack that created this thread. // Not for gccgo: freglo [16]uint32 // d[i] lsb and f[i] // Not for gccgo: freghi [16]uint32 // d[i] msb and f[i+16] // Not for gccgo: fflag uint32 // floating point compare flags lockedExt uint32 // tracking for external LockOSThread lockedInt uint32 // tracking for internal lockOSThread nextwaitm muintptr // next m waiting for lock waitunlockf unsafe.Pointer // todo go func(*g, unsafe.pointer) bool waitlock unsafe.Pointer waittraceev byte waittraceskip int startingtrace bool syscalltick uint32 // Not for gccgo: thread uintptr // thread handle freelink *m // on sched.freem // these are here because they are too large to be on the stack // of low-level NOSPLIT functions. // Not for gccgo: libcall libcall // Not for gccgo: libcallpc uintptr // for cpu profiler // Not for gccgo: libcallsp uintptr // Not for gccgo: libcallg guintptr // Not for gccgo: syscall libcall // stores syscall parameters on windows mos mOS // Remaining fields are specific to gccgo. gsignalstack unsafe.Pointer // stack for gsignal gsignalstacksize uintptr dropextram bool // drop after call is done exiting bool // thread is exiting gcing int32 } type p struct { lock mutex id int32 status uint32 // one of pidle/prunning/... link puintptr schedtick uint32 // incremented on every scheduler call syscalltick uint32 // incremented on every system call sysmontick sysmontick // last tick observed by sysmon m muintptr // back-link to associated m (nil if idle) mcache *mcache racectx uintptr // gccgo has only one size of defer. deferpool []*_defer deferpoolbuf [32]*_defer // Cache of goroutine ids, amortizes accesses to runtime·sched.goidgen. goidcache uint64 goidcacheend uint64 // Queue of runnable goroutines. Accessed without lock. runqhead uint32 runqtail uint32 runq [256]guintptr // runnext, if non-nil, is a runnable G that was ready'd by // the current G and should be run next instead of what's in // runq if there's time remaining in the running G's time // slice. It will inherit the time left in the current time // slice. If a set of goroutines is locked in a // communicate-and-wait pattern, this schedules that set as a // unit and eliminates the (potentially large) scheduling // latency that otherwise arises from adding the ready'd // goroutines to the end of the run queue. runnext guintptr // Available G's (status == Gdead) gfree *g gfreecnt int32 sudogcache []*sudog sudogbuf [128]*sudog tracebuf traceBufPtr // traceSweep indicates the sweep events should be traced. // This is used to defer the sweep start event until a span // has actually been swept. traceSweep bool // traceSwept and traceReclaimed track the number of bytes // swept and reclaimed by sweeping in the current sweep loop. traceSwept, traceReclaimed uintptr palloc persistentAlloc // per-P to avoid mutex // Per-P GC state gcAssistTime int64 // Nanoseconds in assistAlloc gcFractionalMarkTime int64 // Nanoseconds in fractional mark worker gcBgMarkWorker guintptr gcMarkWorkerMode gcMarkWorkerMode // gcMarkWorkerStartTime is the nanotime() at which this mark // worker started. gcMarkWorkerStartTime int64 // gcw is this P's GC work buffer cache. The work buffer is // filled by write barriers, drained by mutator assists, and // disposed on certain GC state transitions. gcw gcWork // wbBuf is this P's GC write barrier buffer. // // TODO: Consider caching this in the running G. wbBuf wbBuf runSafePointFn uint32 // if 1, run sched.safePointFn at next safe point pad [sys.CacheLineSize]byte } type schedt struct { // accessed atomically. keep at top to ensure alignment on 32-bit systems. goidgen uint64 lastpoll uint64 lock mutex // When increasing nmidle, nmidlelocked, nmsys, or nmfreed, be // sure to call checkdead(). midle muintptr // idle m's waiting for work nmidle int32 // number of idle m's waiting for work nmidlelocked int32 // number of locked m's waiting for work mnext int64 // number of m's that have been created and next M ID maxmcount int32 // maximum number of m's allowed (or die) nmsys int32 // number of system m's not counted for deadlock nmfreed int64 // cumulative number of freed m's ngsys uint32 // number of system goroutines; updated atomically pidle puintptr // idle p's npidle uint32 nmspinning uint32 // See "Worker thread parking/unparking" comment in proc.go. // Global runnable queue. runqhead guintptr runqtail guintptr runqsize int32 // Global cache of dead G's. gflock mutex gfree *g ngfree int32 // Central cache of sudog structs. sudoglock mutex sudogcache *sudog // Central pool of available defer structs. deferlock mutex deferpool *_defer // freem is the list of m's waiting to be freed when their // m.exited is set. Linked through m.freelink. freem *m gcwaiting uint32 // gc is waiting to run stopwait int32 stopnote note sysmonwait uint32 sysmonnote note // safepointFn should be called on each P at the next GC // safepoint if p.runSafePointFn is set. safePointFn func(*p) safePointWait int32 safePointNote note profilehz int32 // cpu profiling rate procresizetime int64 // nanotime() of last change to gomaxprocs totaltime int64 // ∫gomaxprocs dt up to procresizetime } // Values for the flags field of a sigTabT. const ( _SigNotify = 1 << iota // let signal.Notify have signal, even if from kernel _SigKill // if signal.Notify doesn't take it, exit quietly _SigThrow // if signal.Notify doesn't take it, exit loudly _SigPanic // if the signal is from the kernel, panic _SigDefault // if the signal isn't explicitly requested, don't monitor it _SigGoExit // cause all runtime procs to exit (only used on Plan 9). _SigSetStack // add SA_ONSTACK to libc handler _SigUnblock // always unblock; see blockableSig _SigIgn // _SIG_DFL action is to ignore the signal ) // Lock-free stack node. // // Also known to export_test.go. type lfnode struct { next uint64 pushcnt uintptr } type forcegcstate struct { lock mutex g *g idle uint32 } // startup_random_data holds random bytes initialized at startup. These come from // the ELF AT_RANDOM auxiliary vector (vdso_linux_amd64.go or os_linux_386.go). var startupRandomData []byte // extendRandom extends the random numbers in r[:n] to the whole slice r. // Treats n<0 as n==0. func extendRandom(r []byte, n int) { if n < 0 { n = 0 } for n < len(r) { // Extend random bits using hash function & time seed w := n if w > 16 { w = 16 } h := memhash(unsafe.Pointer(&r[n-w]), uintptr(nanotime()), uintptr(w)) for i := 0; i < sys.PtrSize && n < len(r); i++ { r[n] = byte(h) n++ h >>= 8 } } } // A _defer holds an entry on the list of deferred calls. // If you add a field here, add code to clear it in freedefer. type _defer struct { // The next entry in the stack. link *_defer // The stack variable for the function which called this defer // statement. This is set to true if we are returning from // that function, false if we are panicing through it. frame *bool // The value of the panic stack when this function is // deferred. This function can not recover this value from // the panic stack. This can happen if a deferred function // has a defer statement itself. panicStack *_panic // The panic that caused the defer to run. This is used to // discard panics that have already been handled. _panic *_panic // The function to call. pfn uintptr // The argument to pass to the function. arg unsafe.Pointer // The return address that a recover thunk matches against. // This is set by __go_set_defer_retaddr which is called by // the thunks created by defer statements. retaddr uintptr // Set to true if a function created by reflect.MakeFunc is // permitted to recover. The return address of such a // function function will be somewhere in libffi, so __retaddr // is not useful. makefunccanrecover bool } // panics // This is the gccgo version. type _panic struct { // The next entry in the stack. link *_panic // The value associated with this panic. arg interface{} // Whether this panic has been recovered. recovered bool // Whether this panic was pushed on the stack because of an // exception thrown in some other language. isforeign bool // Whether this panic was already seen by a deferred function // which called panic again. aborted bool } const ( _TraceRuntimeFrames = 1 << iota // include frames for internal runtime functions. _TraceTrap // the initial PC, SP are from a trap, not a return PC from a call _TraceJumpStack // if traceback is on a systemstack, resume trace at g that called into it ) // The maximum number of frames we print for a traceback const _TracebackMaxFrames = 100 var ( allglen uintptr allm *m allp []*p // len(allp) == gomaxprocs; may change at safe points, otherwise immutable allpLock mutex // Protects P-less reads of allp and all writes gomaxprocs int32 ncpu int32 forcegc forcegcstate sched schedt newprocs int32 // Information about what cpu features are available. // Set on startup in asm_{x86,amd64}.s. // Packages outside the runtime should not use these // as they are not an external api. cpuid_ecx uint32 support_aes bool // cpuid_edx uint32 // cpuid_ebx7 uint32 // lfenceBeforeRdtsc bool // support_avx bool // support_avx2 bool // support_bmi1 bool // support_bmi2 bool // goarm uint8 // set by cmd/link on arm systems // framepointer_enabled bool // set by cmd/link ) // Set by the linker so the runtime can determine the buildmode. var ( islibrary bool // -buildmode=c-shared isarchive bool // -buildmode=c-archive ) // Types that are only used by gccgo. // g_ucontext_t is a Go version of the C ucontext_t type, used by getcontext. // _sizeof_ucontext_t is defined by mkrsysinfo.sh from . // On some systems getcontext and friends require a value that is // aligned to a 16-byte boundary. We implement this by increasing the // required size and picking an appropriate offset when we use the // array. type g_ucontext_t [(_sizeof_ucontext_t + 15) / unsafe.Sizeof(uintptr(0))]uintptr // sigset is the Go version of the C type sigset_t. // _sigset_t is defined by the Makefile from . type sigset _sigset_t // getMemstats returns a pointer to the internal memstats variable, // for C code. //go:linkname getMemstats runtime.getMemstats func getMemstats() *mstats { return &memstats }