# NLnet.net LIP6.fr Coriolis2 proposal
* [[questions]]
* approved 20dec2019
* MOU TBD
* 2019-10-029
* NLNet Project Page
* Top-level bugreport
## Project name
The Libre-RISCV SoC, Coriolis2 ASIC Layout Collaboration
## Website / wiki
Please be short and to the point in your answers; focus primarily on
the what and how, not so much on the why. Add longer descriptions as
attachments (see below). If English isn't your first language, don't
worry - our reviewers don't care about spelling errors, only about
great ideas. We apologise for the inconvenience of having to submit in
English. On the up side, you can be as technical as you need to be (but
you don't have to). Do stay concrete. Use plain text in your reply only,
if you need any HTML to make your point please include this as attachment.
## Abstract: Can you explain the whole project and its expected outcome(s).
The Libre RISC-V SoC is being developed to provide a privacy-respecting
modern processor, developed transparently and as libre to the bedrock
as possible. This means not just the software running on the processor:
it means the actual hardware design and the hardware layout, right down
to the transistor level.
It is necessary, therefore, to use libre-licensed VLSI Layout tools
rather than pay for proprietary software that, apart from being incredibly
expensive, could potentially compromise the integrity of the project.
We therefore intend to collaborate with engineers from LIP6, to use
and improve their VLSI Layout tool, Coriolis2, in conjunction with
Chips4Makers, to create the layout that Chips4Makers will then put into
a 180nm 300mhz test chip.
# Have you been involved with projects or organisations relevant to this project before? And if so, can you tell us a bit about your contributions?
Luke Leighton is an ethical technology specialist who has a consistent
24-year track record of developing code in a real-time transparent
(fully libre) fashion, and in managing Software Libre teams. He is the
lead developer on the Libre RISC-V SoC.
Jean-Paul Chaput is the lead engineer on the Alliance and Coriolis2
tools for VLSI backend layout, from LIP6.
# Requested Amount
EUR 50,000.
# Explain what the requested budget will be used for?
The key initial milestone for the 2018 NLNet Libre RISC-V SoC Project
is the FPGA target: a working design that can run in an FPGA at approximately
50Mhz. The next logical step is to do the layout.
However, FPGA targets have some quirks which help accelerate FPGAs (not ASICs):
an on-board DSP, specialist memory, and so on. Without these "crutches"
the design must be augmented and adapted to suit ASIC layout.
As we are using nmigen for the HDL front-end and yosys for the HDL
back-end, we will need to work with the nmigen developers in order to
augment nmigen to cope with the task of creating "netlists" suitable for
ASICs. Whilst yosys (the actual "netlist" generator) has been utilised
for this task repeatedly and successfully, and whilst the prior version,
"migen", was also used, nmigen has not yet been ASIC proven.
Once a "netlist" is available, the Coriolis2 VLSI tool will be used to
actually create the layers of the chip. Given the size and capabilities
of the chip, we anticipate issues here, which we will need the support
of LIP6's engineers to solve.
The layout itself is also dependent on what is called "Cell Libraries".
One is "NSXLIB" which contains OR and AND gates to create MUXes and XORs.
Another is an "SRAM" Library (memory), and another is a "GPIO" Cell
Library. Chips4Makers will be working on these low-level blocks for
us (under a separate Programme), however we again anticipate issues -
related to Foundry NDAs - which will hamper the communications process.
So therefore, the requested budget will be used for:
* Augmentation and adaptation of the Libre RISC-V SoC HDL to ASIC layout
* Engineers to work on the layout using Alliance / Coriolos2 VLSI, from lip6
* Engineers to bug-fix or augment Alliance / Coriolis2
* Essential augmentations to nmigen to make it ASIC-layout-capable
All of these will be and are entirely libre-licensed software: there will
be no proprietary software tools utilised in this process.
# Does the project have other funding sources, both past and present?
The overall project has sponsorship from Purism as well as a prior grant
from NLNet. However that is for specifically covering the development
of the RTL (the hardware source code).
There is no source of funds for the work on the *next* stage: the actual
VLSI ASIC Layout. Chips4Makers is however putting in an *additional*
(and separate) funding application for the stage after *this*: the
creation of the Cell Libraries that will be used in the VLSI ASIC Layout.
All these three projects are separate and distinct (despite being related
to the same CPU), and funding may not cross over from one project to
the other.
# Compare your own project with existing or historical efforts.
There are several Open VLSI Tool suites:
* GNU Electric: https://www.gnu.org/software/electric/
* MAGIC: http://opencircuitdesign.com/magic/
* The OpenROAD Project: https://theopenroadproject.org/ (using MAGIC)
* QFlow: http://opencircuitdesign.com/qflow/
* Toped: http://www.toped.org.uk/
and a few more. We choose Coriolis2 because of its python interface.
The VLSI Layout is actually done as a *python* program. With nmigen
(the HDL) being in python, we anticipate the same OO benefits to be
achievable in coriolis2 as well.
The case for the Libre RISC-V SoC itself was made already in the initial
2018.02 proposal. That has not changed: there are no Libre / Open Projects
approaching anything like the complexity and product market opportunities
of the Libre RISC-V SoC, which is being designed to be a quad-core 800mhz
multi-issue out-of-order design. All other Libre / Open processors such
as Raven, and many more, have a goal set in advance not to exceed around
the 350mhz mark, and are single-core.
Other projects which are "open", such as the Ariane Processor, are
developed by universities, and in the case of Ariane were *SPECIFICALLY*
designed by and for the use of proprietary toolchains, such as those from
Cadence, Synopsys and Mentor Graphics. Despite the source code being
"open", there was absolutely no expectation that the processor of the
same capability as the Libre RISC-V SoC would use Libre / Open tools.
Although our first ASIC (thanks to Chips4Makers) will be only 180nm,
single-core and a maximum of around 350mhz, this is just the first
stepping stone to a much larger processor.
## What are significant technical challenges you expect to solve during the project, if any?
Some of these have been mentioned above:
* NDAs by Foundries may interfere with the ability for Chips4Makers to
communicate with LIP6 regarding the necessary changes to NSXLIB which
meet the TSMC Foundry "Design Rule Checks" (DRCs).
* Bugs or missing features in nmigen, yosys, coriolis2, NSXLIB, OpenRAM,
and the knock-on implications throughout the chain, right the way up
to the *actual* Libre RISC-V SoC's HDL source code itself, all need to
be dealt with.
* Circuit simulation and unit testing is going to be a major factor, and
a huge utilisation of Computing power. Machines with "only" 16 GB of RAM
and high-end quad-core processors are going to be hopelessly inadequate.
## Describe the ecosystem of the project, and how you will engage with relevant actors and promote the outcomes?
LIP6 have their own mailing list for the (transparent) discussion of
issues related to coriolis2: . The Libre RISC-V
SoC has a full set of resources for Libre Project Management and development:
mailing list, bugtracker, git repository and wiki - all listed here:
In addition, we have a Crowdsupply page
which provides a public
gateway, and heise.de, reddit, phoronix, slashdot and other locations have
all picked up the story. The list is updated and maintained here:
# Extra info to be submitted
*
*
*
*