[[!tag standards]] [[!toc levels=1]] # Implementation Log * ternlogi * grev * GF2^M # bitmanipulation **DRAFT STATUS** pseudocode: [[openpower/isa/bitmanip]] this extension amalgamates bitmanipulation primitives from many sources, including RISC-V bitmanip, Packed SIMD, AVX-512 and OpenPOWER VSX. Also included are DSP/Multimedia operations suitable for Audio/Video. Vectorisation and SIMD are removed: these are straight scalar (element) operations making them suitable for embedded applications. Vectorisation Context is provided by [[openpower/sv]]. When combined with SV, scalar variants of bitmanip operations found in VSX are added so that the Packed SIMD aspects of VSX may be retired as "legacy" in the far future (10 to 20 years). Also, VSX is hundreds of opcodes, requires 128 bit pathways, and is wholly unsuited to low power or embedded scenarios. ternlogv is experimental and is the only operation that may be considered a "Packed SIMD". It is added as a variant of the already well-justified ternlog operation (done in AVX512 as an immediate only) "because it looks fun". As it is based on the LUT4 concept it will allow accelerated emulation of FPGAs. Other vendors of ISAs are buying FPGA companies to achieve similar objectives. general-purpose Galois Field 2^M operations are added so as to avoid huge custom opcode proliferation across many areas of Computer Science. however for convenience and also to avoid setup costs, some of the more common operations (clmul, crc32) are also added. The expectation is that these operations would all be covered by the same pipeline. note that there are brownfield spaces below that could incorporate some of the set-before-first and other scalar operations listed in [[sv/vector_ops]], and the [[sv/av_opcodes]] as well as [[sv/setvl]], [[sv/svstep]], [[sv/remap]] Useful resource: * * # summary two major opcodes are needed ternlog has its own major opcode | 29.30 |31| name | | ------ |--| --------- | | 0 0 |Rc| ternlogi | | 0 1 |sz| ternlogv | | 1 iv | | grevlogi | 2nd major opcode for other bitmanip: minor opcode allocation | 28.30 |31| name | | ------ |--| --------- | | -00 |0 | xpermi | | -00 |1 | grevlog | | -01 | | crternlog | | 010 |Rc| bitmask | | 011 | | SVP64 | | 110 |Rc| 1/2-op | | 111 | | bmrevi | 1-op and variants | dest | src1 | subop | op | | ---- | ---- | ----- | -------- | | RT | RA | .. | bmatflip | 2-op and variants | dest | src1 | src2 | subop | op | | ---- | ---- | ---- | ----- | -------- | | RT | RA | RB | or | bmatflip | | RT | RA | RB | xor | bmatflip | | RT | RA | RB | | grev | | RT | RA | RB | | clmul* | | RT | RA | RB | | gorc | | RT | RA | RB | shuf | shuffle | | RT | RA | RB | unshuf| shuffle | | RT | RA | RB | width | xperm | | RT | RA | RB | type | av minmax | | RT | RA | RB | | av abs avgadd | | RT | RA | RB | type | vmask ops | | RT | RA | RB | | | 3 ops * grevlog * GF mul-add * bitmask-reverse TODO: convert all instructions to use RT and not RS | 0.5|6.10|11.15|16.20 |21..25 | 26....30 |31| name | | -- | -- | --- | --- | ----- | -------- |--| ------ | | NN | RT | RA |itype/| im0-4 | im5-7 00 |0 | xpermi | | NN | RT | RA | RB | im0-4 | im5-7 00 |1 | grevlog | | NN | | | | | ----- 01 |m3| crternlog | | NN | RT | RA | RB | RC | mode 010 |Rc| bitmask* | | NN | | | | | 00 011 | | rsvd | | NN | | | | | 01 011 |0 | svshape | | NN | | | | | 01 011 |1 | svremap | | NN | | | | | 10 011 |Rc| svstep | | NN | | | | | 11 011 |Rc| setvl | | NN | | | | | ---- 110 | | 1/2 ops | | NN | RT | RA | RB | sh0-4 | sh5 1 111 |Rc| bmrevi | ops (note that av avg and abs as well as vec scalar mask are included here [[sv/vector_ops]], and the [[sv/av_opcodes]]) TODO: convert from RA, RB, and RC to correct field names of RT, RA, and RB, and double check that instructions didn't need 3 inputs. | 0.5|6.10|11.15|16.20| 21 | 22.23 | 24....30 |31| name | | -- | -- | --- | --- | -- | ----- | -------- |--| ---- | | NN | RS | me | sh | SH | ME 0 | nn00 110 |Rc| bmopsi | | NN | RS | RB | sh | SH | 0 1 | nn00 110 |Rc| bmopsi | | NN | RT | RA | RB | 1 | 00 | 0001 110 |Rc| cldiv | | NN | RT | RA | RB | 1 | 01 | 0001 110 |Rc| clmod | | NN | RT | RA | | 1 | 10 | 0001 110 |Rc| bmatflip | | NN | | | | 1 | 11 | 0001 110 |Rc| rsvd | | NN | RA | RB | RC | 0 | 00 | 0001 110 |Rc| vec sbfm | | NN | RA | RB | RC | 0 | 01 | 0001 110 |Rc| vec sofm | | NN | RA | RB | RC | 0 | 10 | 0001 110 |Rc| vec sifm | | NN | RA | RB | RC | 0 | 11 | 0001 110 |Rc| vec cprop | | NN | | | | 0 | | 0101 110 |Rc| rsvd | | NN | RT | RA | RB | 1 | itype | 0101 110 |Rc| xperm | | NN | RA | RB | RC | 0 | itype | 1001 110 |Rc| av minmax | | NN | RA | RB | RC | 1 | 00 | 1001 110 |Rc| av abss | | NN | RA | RB | RC | 1 | 01 | 1001 110 |Rc| av absu | | NN | RA | RB | | 1 | 10 | 1001 110 |Rc| av avgadd | | NN | | | | 1 | 11 | 1001 110 |Rc| rsvd | | NN | RT | RA | RB | 0 | sh | 1101 110 |Rc| shadd | | NN | RT | RA | RB | 1 | sh | 1101 110 |Rc| shadduw | | NN | RA | RB | RC | 0 | 00 | 0010 110 |Rc| gorc | | NN | RA | RB | sh | SH | 00 | 1010 110 |Rc| gorci | | NN | RA | RB | RC | 0 | 00 | 0110 110 |Rc| gorcw | | NN | RA | RB | sh | 0 | 00 | 1110 110 |Rc| gorcwi | | NN | RA | RB | RC | 1 | 00 | 1110 110 |Rc| bmator | | NN | RA | RB | RC | 0 | 01 | 0010 110 |Rc| grev | | NN | RA | RB | RC | 1 | 01 | 0010 110 |Rc| clmul | | NN | RA | RB | sh | SH | 01 | 1010 110 |Rc| grevi | | NN | RA | RB | RC | 0 | 01 | 0110 110 |Rc| grevw | | NN | RA | RB | sh | 0 | 01 | 1110 110 |Rc| grevwi | | NN | RA | RB | RC | 1 | 01 | 1110 110 |Rc| bmatxor | | NN | | | | | 10 | --10 110 |Rc| rsvd | | NN | RA | RB | RC | 0 | 11 | 1110 110 |Rc| clmulr | | NN | RA | RB | RC | 1 | 11 | 1110 110 |Rc| clmulh | | NN | | | | | | --11 110 |Rc| rsvd | # ternlog bitops Similar to FPGA LUTs: for every bit perform a lookup into a table using an 8bit immediate, or in another register. Like the x86 AVX512F [vpternlogd/vpternlogq](https://www.felixcloutier.com/x86/vpternlogd:vpternlogq) instructions. ## ternlogi | 0.5|6.10|11.15|16.20| 21..28|29.30|31| | -- | -- | --- | --- | ----- | --- |--| | NN | RT | RA | RB | im0-7 | 00 |Rc| lut3(imm, a, b, c): idx = c << 2 | b << 1 | a return imm[idx] # idx by LSB0 order for i in range(64): RT[i] = lut3(imm, RB[i], RA[i], RT[i]) ## ternlogv also, another possible variant involving swizzle-like selection and masking, this only requires 3 64 bit registers (RA, RS, RB) and only 16 LUT3s. Note however that unless XLEN matches sz, this instruction is a Read-Modify-Write: RS must be read as a second operand and all unmodified bits preserved. SVP64 may provide limited alternative destination for RS from RS-as-source, but again all unmodified bits must still be copied. | 0.5|6.10|11.15|16.20|21.28 | 29.30 |31| | -- | -- | --- | --- | ---- | ----- |--| | NN | RS | RA | RB |idx0-3| 01 |sz| SZ = (1+sz) * 8 # 8 or 16 raoff = MIN(XLEN, idx0 * SZ) rboff = MIN(XLEN, idx1 * SZ) rcoff = MIN(XLEN, idx2 * SZ) rsoff = MIN(XLEN, idx3 * SZ) imm = RB[0:8] for i in range(MIN(XLEN, SZ)): ra = RA[raoff:+i] rb = RA[rboff+i] rc = RA[rcoff+i] res = lut3(imm, ra, rb, rc) RS[rsoff+i] = res ## ternlogcr another mode selection would be CRs not Ints. | 0.5|6.8 | 9.11|12.14|15.17|18.20|21.28 | 29.30|31| | -- | -- | --- | --- | --- |-----|----- | -----|--| | NN | BT | BA | BB | BC |m0-2 | imm | 01 |m3| mask = m0-3,m4 for i in range(4): a,b,c = CRs[BA][i], CRs[BB][i], CRs[BC][i]) if mask[i] CRs[BT][i] = lut3(imm, a, b, c) # int ops ## min/m required for the [[sv/av_opcodes]] signed and unsigned min/max for integer. this is sort-of partly synthesiseable in [[sv/svp64]] with pred-result as long as the dest reg is one of the sources, but not both signed and unsigned. when the dest is also one of the srces and the mv fails due to the CR bittest failing this will only overwrite the dest where the src is greater (or less). signed/unsigned min/max gives more flexibility. ``` uint_xlen_t min(uint_xlen_t rs1, uint_xlen_t rs2) { return (int_xlen_t)rs1 < (int_xlen_t)rs2 ? rs1 : rs2; } uint_xlen_t max(uint_xlen_t rs1, uint_xlen_t rs2) { return (int_xlen_t)rs1 > (int_xlen_t)rs2 ? rs1 : rs2; } uint_xlen_t minu(uint_xlen_t rs1, uint_xlen_t rs2) { return rs1 < rs2 ? rs1 : rs2; } uint_xlen_t maxu(uint_xlen_t rs1, uint_xlen_t rs2) { return rs1 > rs2 ? rs1 : rs2; } ``` ## average required for the [[sv/av_opcodes]], these exist in Packed SIMD (VSX) but not scalar ``` uint_xlen_t intavg(uint_xlen_t rs1, uint_xlen_t rs2) { return (rs1 + rs2 + 1) >> 1: } ``` ## abs required for the [[sv/av_opcodes]], these exist in Packed SIMD (VSX) but not scalar ``` uint_xlen_t intabs(uint_xlen_t rs1, uint_xlen_t rs2) { return (src1 > src2) ? (src1-src2) : (src2-src1) } ``` # shift-and-add Power ISA is missing LD/ST with shift, which is present in both ARM and x86. Too complex to add more LD/ST, a compromise is to add shift-and-add. Replaces a pair of explicit instructions in hot-loops. ``` uint_xlen_t shadd(uint_xlen_t rs1, uint_xlen_t rs2, uint8_t sh) { return (rs1 << (sh+1)) + rs2; } uint_xlen_t shadduw(uint_xlen_t rs1, uint_xlen_t rs2, uint8_t sh) { uint_xlen_t rs1z = rs1 & 0xFFFFFFFF; return (rs1z << (sh+1)) + rs2; } ``` # cmix based on RV bitmanip, covered by ternlog bitops ``` uint_xlen_t cmix(uint_xlen_t RA, uint_xlen_t RB, uint_xlen_t RC) { return (RA & RB) | (RC & ~RB); } ``` # bitmask set based on RV bitmanip singlebit set, instruction format similar to shift [[isa/fixedshift]]. bmext is actually covered already (shift-with-mask rldicl but only immediate version). however bitmask-invert is not, and set/clr are not covered, although they can use the same Shift ALU. bmext (RB) version is not the same as rldicl because bmext is a right shift by RC, where rldicl is a left rotate. for the immediate version this does not matter, so a bmexti is not required. bmrev however there is no direct equivalent and consequently a bmrevi is required. bmset (register for mask amount) is particularly useful for creating predicate masks where the length is a dynamic runtime quantity. bmset(RA=0, RB=0, RC=mask) will produce a run of ones of length "mask" in a single instruction without needing to initialise or depend on any other registers. | 0.5|6.10|11.15|16.20|21.25| 26..30 |31| name | | -- | -- | --- | --- | --- | ------- |--| ----- | | NN | RS | RA | RB | RC | mode 010 |Rc| bm* | Immediate-variant is an overwrite form: | 0.5|6.10|11.15|16.20| 21 | 22.23 | 24....30 |31| name | | -- | -- | --- | --- | -- | ----- | -------- |--| ---- | | NN | RS | RB | sh | SH | itype | 1000 110 |Rc| bm*i | ``` def MASK(x, y): if x < y: x = x+1 mask_a = ((1 << x) - 1) & ((1 << 64) - 1) mask_b = ((1 << y) - 1) & ((1 << 64) - 1) elif x == y: return 1 << x else: x = x+1 mask_a = ((1 << x) - 1) & ((1 << 64) - 1) mask_b = (~((1 << y) - 1)) & ((1 << 64) - 1) return mask_a ^ mask_b uint_xlen_t bmset(RS, RB, sh) { int shamt = RB & (XLEN - 1); mask = (2<> shamt); } ``` bitmask extract with reverse. can be done by bit-order-inverting all of RB and getting bits of RB from the opposite end. when RA is zero, no shift occurs. this makes bmextrev useful for simply reversing all bits of a register. ``` msb = ra[5:0]; rev[0:msb] = rb[msb:0]; rt = ZE(rev[msb:0]); uint_xlen_t bmextrev(RA, RB, sh) { int shamt = XLEN-1; if (RA != 0) shamt = (GPR(RA) & (XLEN - 1)); shamt = (XLEN-1)-shamt; # shift other end bra = bitreverse(RB) # swap LSB-MSB mask = (2<> shamt); } ``` | 0.5|6.10|11.15|16.20|21.26| 27..30 |31| name | | -- | -- | --- | --- | --- | ------- |--| ------ | | NN | RT | RA | RB | sh | 1 011 |Rc| bmrevi | # grevlut generalised reverse combined with a pair of LUT2s and allowing a constant `0b0101...0101` when RA=0, and an option to invert (including when RA=0, giving a constant 0b1010...1010 as the initial value) provides a wide range of instructions and a means to set hundreds of regular 64 bit patterns with one single 32 bit instruction. the two LUT2s are applied left-half (when not swapping) and right-half (when swapping) so as to allow a wider range of options. * A value of `0b11001010` for the immediate provides the functionality of a standard "grev". * `0b11101110` provides gorc grevlut should be arranged so as to produce the constants needed to put into bext (bitextract) so as in turn to be able to emulate x86 pmovmask instructions . This only requires 2 instructions (grevlut, bext). Note that if the mask is required to be placed directly into CR Fields (for use as CR Predicate masks rather than a integer mask) then sv.cmpi or sv.ori may be used instead, bearing in mind that sv.ori is a 64-bit instruction, and `VL` must have been set to the required length: sv.ori./elwid=8 r10.v, r10.v, 0 The following settings provide the required mask constants: | RA | RB | imm | iv | result | | ------- | ------- | ---------- | -- | ---------- | | 0x555.. | 0b10 | 0b01101100 | 0 | 0x111111... | | 0x555.. | 0b110 | 0b01101100 | 0 | 0x010101... | | 0x555.. | 0b1110 | 0b01101100 | 0 | 0x00010001... | | 0x555.. | 0b10 | 0b11000110 | 1 | 0x88888... | | 0x555.. | 0b110 | 0b11000110 | 1 | 0x808080... | | 0x555.. | 0b1110 | 0b11000110 | 1 | 0x80008000... | Better diagram showing the correct ordering of shamt (RB). A LUT2 is applied to all locations marked in red using the first 4 bits of the immediate, and a separate LUT2 applied to all locations in green using the upper 4 bits of the immediate. demo code [[openpower/sv/grevlut.py]] ``` lut2(imm, a, b): idx = b << 1 | a return imm[idx] # idx by LSB0 order dorow(imm8, step_i, chunksize): for j in 0 to 63: if (j&chunk_size) == 0 imm = imm8[0..3] else imm = imm8[4..7] step_o[j] = lut2(imm, step_i[j], step_i[j ^ chunk_size]) return step_o uint64_t grevlut64(uint64_t RA, uint64_t RB, uint8 imm, bool iv) { uint64_t x = 0x5555_5555_5555_5555; if (RA != 0) x = GPR(RA); if (iv) x = ~x; int shamt = RB & 63; for i in 0 to 6 step = 1< ``` uint64_t grev64(uint64_t RA, uint64_t RB) { uint64_t x = RA; int shamt = RB & 63; if (shamt & 1) x = ((x & 0x5555555555555555LL) << 1) | ((x & 0xAAAAAAAAAAAAAAAALL) >> 1); if (shamt & 2) x = ((x & 0x3333333333333333LL) << 2) | ((x & 0xCCCCCCCCCCCCCCCCLL) >> 2); if (shamt & 4) x = ((x & 0x0F0F0F0F0F0F0F0FLL) << 4) | ((x & 0xF0F0F0F0F0F0F0F0LL) >> 4); if (shamt & 8) x = ((x & 0x00FF00FF00FF00FFLL) << 8) | ((x & 0xFF00FF00FF00FF00LL) >> 8); if (shamt & 16) x = ((x & 0x0000FFFF0000FFFFLL) << 16) | ((x & 0xFFFF0000FFFF0000LL) >> 16); if (shamt & 32) x = ((x & 0x00000000FFFFFFFFLL) << 32) | ((x & 0xFFFFFFFF00000000LL) >> 32); return x; } ``` # gorc based on RV bitmanip, gorc is superceded by grevlut ``` uint32_t gorc32(uint32_t RA, uint32_t RB) { uint32_t x = RA; int shamt = RB & 31; if (shamt & 1) x |= ((x & 0x55555555) << 1) | ((x & 0xAAAAAAAA) >> 1); if (shamt & 2) x |= ((x & 0x33333333) << 2) | ((x & 0xCCCCCCCC) >> 2); if (shamt & 4) x |= ((x & 0x0F0F0F0F) << 4) | ((x & 0xF0F0F0F0) >> 4); if (shamt & 8) x |= ((x & 0x00FF00FF) << 8) | ((x & 0xFF00FF00) >> 8); if (shamt & 16) x |= ((x & 0x0000FFFF) << 16) | ((x & 0xFFFF0000) >> 16); return x; } uint64_t gorc64(uint64_t RA, uint64_t RB) { uint64_t x = RA; int shamt = RB & 63; if (shamt & 1) x |= ((x & 0x5555555555555555LL) << 1) | ((x & 0xAAAAAAAAAAAAAAAALL) >> 1); if (shamt & 2) x |= ((x & 0x3333333333333333LL) << 2) | ((x & 0xCCCCCCCCCCCCCCCCLL) >> 2); if (shamt & 4) x |= ((x & 0x0F0F0F0F0F0F0F0FLL) << 4) | ((x & 0xF0F0F0F0F0F0F0F0LL) >> 4); if (shamt & 8) x |= ((x & 0x00FF00FF00FF00FFLL) << 8) | ((x & 0xFF00FF00FF00FF00LL) >> 8); if (shamt & 16) x |= ((x & 0x0000FFFF0000FFFFLL) << 16) | ((x & 0xFFFF0000FFFF0000LL) >> 16); if (shamt & 32) x |= ((x & 0x00000000FFFFFFFFLL) << 32) | ((x & 0xFFFFFFFF00000000LL) >> 32); return x; } ``` # xperm based on RV bitmanip. RA contains a vector of indices to select parts of RB to be copied to RT. The immediate-variant allows up to an 8 bit pattern (repeated) to be targetted at different parts of RT. xperm shares some similarity with one of the uses of bmator in that xperm indices are binary addressing where bitmator may be considered to be unary addressing. ``` uint_xlen_t xpermi(uint8_t imm8, uint_xlen_t RB, int sz_log2) { uint_xlen_t r = 0; uint_xlen_t sz = 1LL << sz_log2; uint_xlen_t mask = (1LL << sz) - 1; uint_xlen_t RA = imm8 | imm8<<8 | ... | imm8<<56; for (int i = 0; i < XLEN; i += sz) { uint_xlen_t pos = ((RA >> i) & mask) << sz_log2; if (pos < XLEN) r |= ((RB >> pos) & mask) << i; } return r; } uint_xlen_t xperm(uint_xlen_t RA, uint_xlen_t RB, int sz_log2) { uint_xlen_t r = 0; uint_xlen_t sz = 1LL << sz_log2; uint_xlen_t mask = (1LL << sz) - 1; for (int i = 0; i < XLEN; i += sz) { uint_xlen_t pos = ((RA >> i) & mask) << sz_log2; if (pos < XLEN) r |= ((RB >> pos) & mask) << i; } return r; } uint_xlen_t xperm_n (uint_xlen_t RA, uint_xlen_t RB) { return xperm(RA, RB, 2); } uint_xlen_t xperm_b (uint_xlen_t RA, uint_xlen_t RB) { return xperm(RA, RB, 3); } uint_xlen_t xperm_h (uint_xlen_t RA, uint_xlen_t RB) { return xperm(RA, RB, 4); } uint_xlen_t xperm_w (uint_xlen_t RA, uint_xlen_t RB) { return xperm(RA, RB, 5); } ``` # bitmatrix ``` uint64_t bmatflip(uint64_t RA) { uint64_t x = RA; x = shfl64(x, 31); x = shfl64(x, 31); x = shfl64(x, 31); return x; } uint64_t bmatxor(uint64_t RA, uint64_t RB) { // transpose of RB uint64_t RBt = bmatflip(RB); uint8_t u[8]; // rows of RA uint8_t v[8]; // cols of RB for (int i = 0; i < 8; i++) { u[i] = RA >> (i*8); v[i] = RBt >> (i*8); } uint64_t x = 0; for (int i = 0; i < 64; i++) { if (pcnt(u[i / 8] & v[i % 8]) & 1) x |= 1LL << i; } return x; } uint64_t bmator(uint64_t RA, uint64_t RB) { // transpose of RB uint64_t RBt = bmatflip(RB); uint8_t u[8]; // rows of RA uint8_t v[8]; // cols of RB for (int i = 0; i < 8; i++) { u[i] = RA >> (i*8); v[i] = RBt >> (i*8); } uint64_t x = 0; for (int i = 0; i < 64; i++) { if ((u[i / 8] & v[i % 8]) != 0) x |= 1LL << i; } return x; } ``` # Introduction to Carry-less and GF arithmetic * obligatory xkcd There are three completely separate types of Galois-Field-based arithmetic that we implement which are not well explained even in introductory literature. A slightly oversimplified explanation is followed by more accurate descriptions: * `GF(2)` carry-less binary arithmetic. this is not actually a Galois Field, but is accidentally referred to as GF(2) - see below as to why. * `GF(p)` modulo arithmetic with a Prime number, these are "proper" Galois Fields * `GF(2^N)` carry-less binary arithmetic with two limits: modulo a power-of-2 (2^N) and a second "reducing" polynomial (similar to a prime number), these are said to be GF(2^N) arithmetic. further detailed and more precise explanations are provided below * **Polynomials with coefficients in `GF(2)`** (aka. Carry-less arithmetic -- the `cl*` instructions). This isn't actually a Galois Field, but its coefficients are. This is basically binary integer addition, subtraction, and multiplication like usual, except that carries aren't propagated at all, effectively turning both addition and subtraction into the bitwise xor operation. Division and remainder are defined to match how addition and multiplication works. * **Galois Fields with a prime size** (aka. `GF(p)` or Prime Galois Fields -- the `gfp*` instructions). This is basically just the integers mod `p`. * **Galois Fields with a power-of-a-prime size** (aka. `GF(p^n)` or `GF(q)` where `q == p^n` for prime `p` and integer `n > 0`). We only implement these for `p == 2`, called Binary Galois Fields (`GF(2^n)` -- the `gfb*` instructions). For any prime `p`, `GF(p^n)` is implemented as polynomials with coefficients in `GF(p)` and degree `< n`, where the polynomials are the remainders of dividing by a specificly chosen polynomial in `GF(p)` called the Reducing Polynomial (we will denote that by `red_poly`). The Reducing Polynomial must be an irreducable polynomial (like primes, but for polynomials), as well as have degree `n`. All `GF(p^n)` for the same `p` and `n` are isomorphic to each other -- the choice of `red_poly` doesn't affect `GF(p^n)`'s mathematical shape, all that changes is the specific polynomials used to implement `GF(p^n)`. Many implementations and much of the literature do not make a clear distinction between these three categories, which makes it confusing to understand what their purpose and value is. * carry-less multiply is extremely common and is used for the ubiquitous CRC32 algorithm. [TODO add many others, helps justify to ISA WG] * GF(2^N) forms the basis of Rijndael (the current AES standard) and has significant uses throughout cryptography * GF(p) is the basis again of a significant quantity of algorithms (TODO, list them, jacob knows what they are), even though the modulo is limited to be below 64-bit (size of a scalar int) # Instructions for Carry-less Operations aka. Polynomials with coefficients in `GF(2)` Carry-less addition/subtraction is simply XOR, so a `cladd` instruction is not provided since the `xor[i]` instruction can be used instead. These are operations on polynomials with coefficients in `GF(2)`, with the polynomial's coefficients packed into integers with the following algorithm: ```python [[!inline pagenames="gf_reference/pack_poly.py" raw="yes"]] ``` ## Carry-less Multiply Instructions based on RV bitmanip see and and They are worth adding as their own non-overwrite operations (in the same pipeline). ### `clmul` Carry-less Multiply ```python [[!inline pagenames="gf_reference/clmul.py" raw="yes"]] ``` ### `clmulh` Carry-less Multiply High ```python [[!inline pagenames="gf_reference/clmulh.py" raw="yes"]] ``` ### `clmulr` Carry-less Multiply (Reversed) Useful for CRCs. Equivalent to bit-reversing the result of `clmul` on bit-reversed inputs. ```python [[!inline pagenames="gf_reference/clmulr.py" raw="yes"]] ``` ## `clmadd` Carry-less Multiply-Add ``` clmadd RT, RA, RB, RC ``` ``` (RT) = clmul((RA), (RB)) ^ (RC) ``` ## `cltmadd` Twin Carry-less Multiply-Add (for FFTs) Used in combination with SV FFT REMAP to perform a full Discrete Fourier Transform of Polynomials over GF(2) in-place. Possible by having 3-in 2-out, to avoid the need for a temp register. RS is written to as well as RT. Note: Polynomials over GF(2) are a Ring rather than a Field, so, because the definition of the Inverse Discrete Fourier Transform involves calculating a multiplicative inverse, which may not exist in every Ring, therefore the Inverse Discrete Fourier Transform may not exist. (AFAICT the number of inputs to the IDFT must be odd for the IDFT to be defined for Polynomials over GF(2). TODO: check with someone who knows for sure if that's correct.) ``` cltmadd RT, RA, RB, RC ``` TODO: add link to explanation for where `RS` comes from. ``` a = (RA) c = (RC) # read all inputs before writing to any outputs in case # an input overlaps with an output register. (RT) = clmul(a, (RB)) ^ c (RS) = a ^ c ``` ## `cldivrem` Carry-less Division and Remainder `cldivrem` isn't an actual instruction, but is just used in the pseudo-code for other instructions. ```python [[!inline pagenames="gf_reference/cldivrem.py" raw="yes"]] ``` ## `cldiv` Carry-less Division ``` cldiv RT, RA, RB ``` ``` n = (RA) d = (RB) q, r = cldivrem(n, d, width=XLEN) (RT) = q ``` ## `clrem` Carry-less Remainder ``` clrem RT, RA, RB ``` ``` n = (RA) d = (RB) q, r = cldivrem(n, d, width=XLEN) (RT) = r ``` # Instructions for Binary Galois Fields `GF(2^m)` see: * * * Binary Galois Field addition/subtraction is simply XOR, so a `gfbadd` instruction is not provided since the `xor[i]` instruction can be used instead. ## `GFBREDPOLY` SPR -- Reducing Polynomial In order to save registers and to make operations orthogonal with standard arithmetic, the reducing polynomial is stored in a dedicated SPR `GFBREDPOLY`. This also allows hardware to pre-compute useful parameters (such as the degree, or look-up tables) based on the reducing polynomial, and store them alongside the SPR in hidden registers, only recomputing them whenever the SPR is written to, rather than having to recompute those values for every instruction. Because Galois Fields require the reducing polynomial to be an irreducible polynomial, that guarantees that any polynomial of `degree > 1` must have the LSB set, since otherwise it would be divisible by the polynomial `x`, making it reducible, making whatever we're working on no longer a Field. Therefore, we can reuse the LSB to indicate `degree == XLEN`. ```python [[!inline pagenames="gf_reference/decode_reducing_polynomial.py" raw="yes"]] ``` ## `gfbredpoly` -- Set the Reducing Polynomial SPR `GFBREDPOLY` unless this is an immediate op, `mtspr` is completely sufficient. ```python [[!inline pagenames="gf_reference/gfbredpoly.py" raw="yes"]] ``` ## `gfbmul` -- Binary Galois Field `GF(2^m)` Multiplication ``` gfbmul RT, RA, RB ``` ```python [[!inline pagenames="gf_reference/gfbmul.py" raw="yes"]] ``` ## `gfbmadd` -- Binary Galois Field `GF(2^m)` Multiply-Add ``` gfbmadd RT, RA, RB, RC ``` ```python [[!inline pagenames="gf_reference/gfbmadd.py" raw="yes"]] ``` ## `gfbtmadd` -- Binary Galois Field `GF(2^m)` Twin Multiply-Add (for FFT) Used in combination with SV FFT REMAP to perform a full `GF(2^m)` Discrete Fourier Transform in-place. Possible by having 3-in 2-out, to avoid the need for a temp register. RS is written to as well as RT. ``` gfbtmadd RT, RA, RB, RC ``` TODO: add link to explanation for where `RS` comes from. ``` a = (RA) c = (RC) # read all inputs before writing to any outputs in case # an input overlaps with an output register. (RT) = gfbmadd(a, (RB), c) # use gfbmadd again since it reduces the result (RS) = gfbmadd(a, 1, c) # "a * 1 + c" ``` ## `gfbinv` -- Binary Galois Field `GF(2^m)` Inverse ``` gfbinv RT, RA ``` ```python [[!inline pagenames="gf_reference/gfbinv.py" raw="yes"]] ``` # Instructions for Prime Galois Fields `GF(p)` ## `GFPRIME` SPR -- Prime Modulus For `gfp*` Instructions ## `gfpadd` Prime Galois Field `GF(p)` Addition ``` gfpadd RT, RA, RB ``` ```python [[!inline pagenames="gf_reference/gfpadd.py" raw="yes"]] ``` the addition happens on infinite-precision integers ## `gfpsub` Prime Galois Field `GF(p)` Subtraction ``` gfpsub RT, RA, RB ``` ```python [[!inline pagenames="gf_reference/gfpsub.py" raw="yes"]] ``` the subtraction happens on infinite-precision integers ## `gfpmul` Prime Galois Field `GF(p)` Multiplication ``` gfpmul RT, RA, RB ``` ```python [[!inline pagenames="gf_reference/gfpmul.py" raw="yes"]] ``` the multiplication happens on infinite-precision integers ## `gfpinv` Prime Galois Field `GF(p)` Invert ``` gfpinv RT, RA ``` Some potential hardware implementations are found in: ```python [[!inline pagenames="gf_reference/gfpinv.py" raw="yes"]] ``` ## `gfpmadd` Prime Galois Field `GF(p)` Multiply-Add ``` gfpmadd RT, RA, RB, RC ``` ```python [[!inline pagenames="gf_reference/gfpmadd.py" raw="yes"]] ``` the multiplication and addition happens on infinite-precision integers ## `gfpmsub` Prime Galois Field `GF(p)` Multiply-Subtract ``` gfpmsub RT, RA, RB, RC ``` ```python [[!inline pagenames="gf_reference/gfpmsub.py" raw="yes"]] ``` the multiplication and subtraction happens on infinite-precision integers ## `gfpmsubr` Prime Galois Field `GF(p)` Multiply-Subtract-Reversed ``` gfpmsubr RT, RA, RB, RC ``` ```python [[!inline pagenames="gf_reference/gfpmsubr.py" raw="yes"]] ``` the multiplication and subtraction happens on infinite-precision integers ## `gfpmaddsubr` Prime Galois Field `GF(p)` Multiply-Add and Multiply-Sub-Reversed (for FFT) Used in combination with SV FFT REMAP to perform a full Number-Theoretic-Transform in-place. Possible by having 3-in 2-out, to avoid the need for a temp register. RS is written to as well as RT. ``` gfpmaddsubr RT, RA, RB, RC ``` TODO: add link to explanation for where `RS` comes from. ``` factor1 = (RA) factor2 = (RB) term = (RC) # read all inputs before writing to any outputs in case # an input overlaps with an output register. (RT) = gfpmadd(factor1, factor2, term) (RS) = gfpmsubr(factor1, factor2, term) ``` # Already in POWER ISA ## count leading/trailing zeros with mask in v3.1 p105 ``` count = 0 do i = 0 to 63 if((RB)i=1) then do if((RS)i=1) then break end end count ← count + 1 RA ← EXTZ64(count) ``` ## bit deposit pdepd VRT,VRA,VRB, identical to RV bitmamip bdep, found already in v3.1 p106 do while(m < 64) if VSR[VRB+32].dword[i].bit[63-m]=1 then do result = VSR[VRA+32].dword[i].bit[63-k] VSR[VRT+32].dword[i].bit[63-m] = result k = k + 1 m = m + 1 ``` uint_xlen_t bdep(uint_xlen_t RA, uint_xlen_t RB) { uint_xlen_t r = 0; for (int i = 0, j = 0; i < XLEN; i++) if ((RB >> i) & 1) { if ((RA >> j) & 1) r |= uint_xlen_t(1) << i; j++; } return r; } ``` ## bit extract other way round: identical to RV bext: pextd, found in v3.1 p196 ``` uint_xlen_t bext(uint_xlen_t RA, uint_xlen_t RB) { uint_xlen_t r = 0; for (int i = 0, j = 0; i < XLEN; i++) if ((RB >> i) & 1) { if ((RA >> i) & 1) r |= uint_xlen_t(1) << j; j++; } return r; } ``` ## centrifuge found in v3.1 p106 so not to be added here ``` ptr0 = 0 ptr1 = 0 do i = 0 to 63 if((RB)i=0) then do resultptr0 = (RS)i end ptr0 = ptr0 + 1 if((RB)63-i==1) then do result63-ptr1 = (RS)63-i end ptr1 = ptr1 + 1 RA = result ``` ## bit to byte permute similar to matrix permute in RV bitmanip, which has XOR and OR variants, these perform a transpose. TODO this looks VSX is there a scalar variant in v3.0/1 already do j = 0 to 7 do k = 0 to 7 b = VSR[VRB+32].dword[i].byte[k].bit[j] VSR[VRT+32].dword[i].byte[j].bit[k] = b # Appendix see [[bitmanip/appendix]]