-# Support for building net releases
-
-# Files in devo used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
- config.guess config.sub config move-if-change \
- mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
- COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
- mkinstalldirs ltconfig ltmain.sh missing ylwrap
-
-# Files in devo/etc used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
- make-stds.texi standards.info*
-
-# When you use `make setup-dirs' or `make taz' you should always redefine
-# this macro.
-SUPPORT_FILES = list-of-support-files-for-tool-in-question
-
-.PHONY: taz
-
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
- texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
- # Take out texinfo from a few places.
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- <Makefile.in >tmp
- mv -f tmp Makefile.in
- #
- $(start-sanitize-Sanitize)
- @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
- $(end-sanitize-Sanitize)
- ./configure sun4
- [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
- || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
- CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
- # Make links, and run "make diststuff" or "make info" when needed.
- rm -rf proto-toplev ; mkdir proto-toplev
- set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
- for d in $$dirs ; do \
- if [ -d $$d ]; then \
- if [ ! -f $$d/Makefile ] ; then true ; \
- elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
- elif grep '^info:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) info ) || exit 1 ; \
- fi ; \
- if [ -d $$d/proto-$$d.dir ]; then \
- ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
- else \
- ln -s ../$$d proto-toplev/$$d ; \
- fi ; \
- else ln -s ../$$d proto-toplev/$$d ; fi ; \
- done
- cd etc ; $(MAKE) info
- $(MAKE) distclean
- #
- mkdir proto-toplev/etc
- (cd proto-toplev/etc; \
- for i in $(ETC_SUPPORT); do \
- ln -s ../../etc/$$i . ; \
- done)
- #
- # Take out texinfo from configurable dirs
- rm proto-toplev/configure.in
- sed -e '/^host_tools=/s/texinfo //' \
- <configure.in >proto-toplev/configure.in
- #
- mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
- ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
- if test -r texinfo/util/tex3patch ; then \
- mkdir proto-toplev/texinfo/util && \
- ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
- else true; fi
- chmod -R og=u . || chmod og=u `find . -print`
- if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
- ver=`sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'`; \
- else \
- ver=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
- fi; \
- $(MAKE) -f Makefile.in do-tar-gz TOOL=$(TOOL) VER=$$ver
-
-do-tar-gz:
- echo "==> Making $(TOOL)-$(VER).tar.gz"
- -rm -f $(TOOL)-$(VER)
- ln -s proto-toplev $(TOOL)-$(VER)
- tar cfh $(TOOL)-$(VER).tar $(TOOL)-$(VER)
- $(GZIPPROG) -v -9 $(TOOL)-$(VER).tar
-
-TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
-DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
-
-.PHONY: gas.tar.gz
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms
-gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
-
-# The FSF "binutils" release includes gprof and ld.
-.PHONY: binutils.tar.gz
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms
-binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
- $(MAKE) -f Makefile.in taz TOOL=binutils \
- SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
-
-.PHONY: gas+binutils.tar.gz
-GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
-
-.PHONY: libg++.tar.gz
-LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
-libg++.tar.gz: $(DIST_SUPPORT) libg++
- $(MAKE) -f Makefile.in taz TOOL=libg++ \
- SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
-
-GNATS_SUPPORT_DIRS=include libiberty send-pr
-gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
- $(MAKE) -f Makefile.in taz TOOL=gnats \
- SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
-
-.PHONY: gdb.tar.gz
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
-GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
-gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in taz TOOL=gdb \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
-
-.PHONY: newlib.tar.gz
-NEWLIB_SUPPORT_DIRS=libgloss
-# taz configures for the sun4 target which won't configure newlib.
-# We need newlib configured so that the .info files are made.
-# Unfortunately, it is not enough to just configure newlib separately:
-# taz will build the .info files but since SUBDIRS won't contain newlib,
-# distclean won't be run (leaving Makefile, config.status, and the tmp files
-# used in building the .info files, eg: *.def, *.ref).
-# The problem isn't solvable however without a lot of extra work because
-# target libraries are built in subdir $(target_alias) which gets nuked during
-# the make distclean. For now punt on the issue of shipping newlib info files
-# with newlib net releases and wait for a day when some native target (sun4?)
-# supports newlib (if only minimally).
-newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
- $(MAKE) -f Makefile.in taz TOOL=newlib \
- SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
- DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib