+/* Do a RELHI relocation. We do this in conjunction with a RELLO
+ reloc, just as REFHI and REFLO are done together. RELHI and RELLO
+ are Cygnus extensions used when generating position independent
+ code for embedded systems. */
+
+/* FIXME: This should not be a static variable. */
+
+static struct mips_hi *mips_relhi_list;
+
+static bfd_reloc_status_type
+mips_relhi_reloc (abfd,
+ reloc_entry,
+ symbol,
+ data,
+ input_section,
+ output_bfd,
+ error_message)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ arelent *reloc_entry;
+ asymbol *symbol;
+ PTR data;
+ asection *input_section;
+ bfd *output_bfd;
+ char **error_message ATTRIBUTE_UNUSED;
+{
+ bfd_reloc_status_type ret;
+ bfd_vma relocation;
+ struct mips_hi *n;
+
+ /* If this is a reloc against a section symbol, then it is correct
+ in the object file. The only time we want to change this case is
+ when we are relaxing, and that is handled entirely by
+ mips_relocate_section and never calls this function. */
+ if ((symbol->flags & BSF_SECTION_SYM) != 0)
+ {
+ if (output_bfd != (bfd *) NULL)
+ reloc_entry->address += input_section->output_offset;
+ return bfd_reloc_ok;
+ }
+
+ /* This is an external symbol. If we're relocating, we don't want
+ to change anything. */
+ if (output_bfd != (bfd *) NULL)
+ {
+ reloc_entry->address += input_section->output_offset;
+ return bfd_reloc_ok;
+ }
+
+ ret = bfd_reloc_ok;
+ if (bfd_is_und_section (symbol->section)
+ && output_bfd == (bfd *) NULL)
+ ret = bfd_reloc_undefined;
+
+ if (bfd_is_com_section (symbol->section))
+ relocation = 0;
+ else
+ relocation = symbol->value;
+
+ relocation += symbol->section->output_section->vma;
+ relocation += symbol->section->output_offset;
+ relocation += reloc_entry->addend;
+
+ if (reloc_entry->address > input_section->_cooked_size)
+ return bfd_reloc_outofrange;
+
+ /* Save the information, and let RELLO do the actual relocation. */
+ n = (struct mips_hi *) bfd_malloc (sizeof *n);
+ if (n == NULL)
+ return bfd_reloc_outofrange;
+ n->addr = (bfd_byte *) data + reloc_entry->address;
+ n->addend = relocation;
+ n->next = mips_relhi_list;
+ mips_relhi_list = n;
+
+ if (output_bfd != (bfd *) NULL)
+ reloc_entry->address += input_section->output_offset;
+
+ return ret;
+}
+
+/* Do a RELLO relocation. This is a straightforward 16 bit PC
+ relative relocation; this function exists in order to do the RELHI
+ relocation described above. */
+
+static bfd_reloc_status_type
+mips_rello_reloc (abfd,
+ reloc_entry,
+ symbol,
+ data,
+ input_section,
+ output_bfd,
+ error_message)
+ bfd *abfd;
+ arelent *reloc_entry;
+ asymbol *symbol;
+ PTR data;
+ asection *input_section;
+ bfd *output_bfd;
+ char **error_message;
+{
+ if (mips_relhi_list != NULL)
+ {
+ struct mips_hi *l;
+
+ l = mips_relhi_list;
+ while (l != NULL)
+ {
+ unsigned long insn;
+ unsigned long val;
+ unsigned long vallo;
+ struct mips_hi *next;
+
+ /* Do the RELHI relocation. Note that we actually don't
+ need to know anything about the RELLO itself, except
+ where to find the low 16 bits of the addend needed by the
+ RELHI. */
+ insn = bfd_get_32 (abfd, l->addr);
+ vallo = (bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address)
+ & 0xffff);
+ val = ((insn & 0xffff) << 16) + vallo;
+ val += l->addend;
+
+ /* If the symbol is defined, make val PC relative. If the
+ symbol is not defined we don't want to do this, because
+ we don't want the value in the object file to incorporate
+ the address of the reloc. */
+ if (! bfd_is_und_section (bfd_get_section (symbol))
+ && ! bfd_is_com_section (bfd_get_section (symbol)))
+ val -= (input_section->output_section->vma
+ + input_section->output_offset
+ + reloc_entry->address);
+
+ /* The low order 16 bits are always treated as a signed
+ value. Therefore, a negative value in the low order bits
+ requires an adjustment in the high order bits. We need
+ to make this adjustment in two ways: once for the bits we
+ took from the data, and once for the bits we are putting
+ back in to the data. */
+ if ((vallo & 0x8000) != 0)
+ val -= 0x10000;
+ if ((val & 0x8000) != 0)
+ val += 0x10000;
+
+ insn = (insn &~ 0xffff) | ((val >> 16) & 0xffff);
+ bfd_put_32 (abfd, insn, l->addr);
+
+ next = l->next;
+ free (l);
+ l = next;
+ }
+
+ mips_relhi_list = NULL;
+ }
+
+ /* If this is a reloc against a section symbol, then it is correct
+ in the object file. The only time we want to change this case is
+ when we are relaxing, and that is handled entirely by
+ mips_relocate_section and never calls this function. */
+ if ((symbol->flags & BSF_SECTION_SYM) != 0)
+ {
+ if (output_bfd != (bfd *) NULL)
+ reloc_entry->address += input_section->output_offset;
+ return bfd_reloc_ok;
+ }
+
+ /* bfd_perform_relocation does not handle pcrel_offset relocations
+ correctly when generating a relocateable file, so handle them
+ directly here. */
+ if (output_bfd != (bfd *) NULL)
+ {
+ reloc_entry->address += input_section->output_offset;
+ return bfd_reloc_ok;
+ }
+
+ /* Now do the RELLO reloc in the usual way. */
+ return mips_generic_reloc (abfd, reloc_entry, symbol, data,
+ input_section, output_bfd, error_message);
+}
+
+/* This is the special function for the MIPS_R_SWITCH reloc. This
+ special reloc is normally correct in the object file, and only
+ requires special handling when relaxing. We don't want
+ bfd_perform_relocation to tamper with it at all. */
+
+/*ARGSUSED*/
+static bfd_reloc_status_type
+mips_switch_reloc (abfd,
+ reloc_entry,
+ symbol,
+ data,
+ input_section,
+ output_bfd,
+ error_message)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ arelent *reloc_entry ATTRIBUTE_UNUSED;
+ asymbol *symbol ATTRIBUTE_UNUSED;
+ PTR data ATTRIBUTE_UNUSED;
+ asection *input_section ATTRIBUTE_UNUSED;
+ bfd *output_bfd ATTRIBUTE_UNUSED;
+ char **error_message ATTRIBUTE_UNUSED;
+{
+ return bfd_reloc_ok;
+}
+