+ continue;
+ }
+
+ if (int_rel.r_extern)
+ {
+ h = sym_hashes[int_rel.r_symndx];
+ /* If h is NULL, that means that there is a reloc against an
+ external symbol which we thought was just a debugging
+ symbol. This should not happen. */
+ if (h == (struct ecoff_link_hash_entry *) NULL)
+ abort ();
+ }
+ else
+ {
+ if (int_rel.r_symndx < 0 || int_rel.r_symndx >= NUM_RELOC_SECTIONS)
+ s = NULL;
+ else
+ s = symndx_to_section[int_rel.r_symndx];
+
+ if (s == (asection *) NULL)
+ abort ();
+ }
+
+ /* The GPREL reloc uses an addend: the difference in the GP
+ values. */
+ if (int_rel.r_type != MIPS_R_GPREL
+ && int_rel.r_type != MIPS_R_LITERAL)
+ addend = 0;
+ else
+ {
+ if (gp_undefined)
+ {
+ if (! ((*info->callbacks->reloc_dangerous)
+ (info, _("GP relative relocation when GP not defined"),
+ input_bfd, input_section,
+ int_rel.r_vaddr - input_section->vma)))
+ return false;
+ /* Only give the error once per link. */
+ gp = 4;
+ _bfd_set_gp_value (output_bfd, gp);
+ gp_undefined = false;
+ }
+ if (! int_rel.r_extern)
+ {
+ /* This is a relocation against a section. The current
+ addend in the instruction is the difference between
+ INPUT_SECTION->vma and the GP value of INPUT_BFD. We
+ must change this to be the difference between the
+ final definition (which will end up in RELOCATION)
+ and the GP value of OUTPUT_BFD (which is in GP). */
+ addend = ecoff_data (input_bfd)->gp - gp;
+ }
+ else if (! info->relocateable
+ || h->root.type == bfd_link_hash_defined
+ || h->root.type == bfd_link_hash_defweak)
+ {
+ /* This is a relocation against a defined symbol. The
+ current addend in the instruction is simply the
+ desired offset into the symbol (normally zero). We
+ are going to change this into a relocation against a
+ defined symbol, so we want the instruction to hold
+ the difference between the final definition of the
+ symbol (which will end up in RELOCATION) and the GP
+ value of OUTPUT_BFD (which is in GP). */
+ addend = - gp;
+ }
+ else
+ {
+ /* This is a relocation against an undefined or common
+ symbol. The current addend in the instruction is
+ simply the desired offset into the symbol (normally
+ zero). We are generating relocateable output, and we
+ aren't going to define this symbol, so we just leave
+ the instruction alone. */
+ addend = 0;
+ }
+ }
+
+ /* If we are relaxing, mips_relax_section may have set
+ offsets[i] to some value. A value of 1 means we must expand
+ a PC relative branch into a multi-instruction of sequence,
+ and any other value is an addend. */
+ if (offsets != NULL
+ && offsets[i] != 0)
+ {
+ BFD_ASSERT (! info->relocateable);
+ BFD_ASSERT (int_rel.r_type == MIPS_R_PCREL16
+ || int_rel.r_type == MIPS_R_RELHI
+ || int_rel.r_type == MIPS_R_RELLO);
+ if (offsets[i] != 1)
+ addend += offsets[i];
+ else
+ {
+ bfd_byte *here;
+
+ BFD_ASSERT (int_rel.r_extern
+ && int_rel.r_type == MIPS_R_PCREL16);
+
+ /* Move the rest of the instructions up. */
+ here = (contents
+ + adjust
+ + int_rel.r_vaddr
+ - input_section->vma);
+ memmove (here + PCREL16_EXPANSION_ADJUSTMENT, here,
+ (size_t) (input_section->_raw_size
+ - (int_rel.r_vaddr - input_section->vma)));
+
+ /* Generate the new instructions. */
+ if (! mips_relax_pcrel16 (info, input_bfd, input_section,
+ h, here,
+ (input_section->output_section->vma
+ + input_section->output_offset
+ + (int_rel.r_vaddr
+ - input_section->vma)
+ + adjust)))
+ return false;
+
+ /* We must adjust everything else up a notch. */
+ adjust += PCREL16_EXPANSION_ADJUSTMENT;
+
+ /* mips_relax_pcrel16 handles all the details of this
+ relocation. */
+ continue;
+ }
+ }
+
+ /* If we are relaxing, and this is a reloc against the .text
+ segment, we may need to adjust it if some branches have been
+ expanded. The reloc types which are likely to occur in the
+ .text section are handled efficiently by mips_relax_section,
+ and thus do not need to be handled here. */
+ if (ecoff_data (input_bfd)->debug_info.adjust != NULL
+ && ! int_rel.r_extern
+ && int_rel.r_symndx == RELOC_SECTION_TEXT
+ && (strcmp (bfd_get_section_name (input_bfd, input_section),
+ ".text") != 0
+ || (int_rel.r_type != MIPS_R_PCREL16
+ && int_rel.r_type != MIPS_R_SWITCH
+ && int_rel.r_type != MIPS_R_RELHI
+ && int_rel.r_type != MIPS_R_RELLO)))
+ {
+ bfd_vma adr;
+ struct ecoff_value_adjust *a;
+
+ /* We need to get the addend so that we know whether we need
+ to adjust the address. */
+ BFD_ASSERT (int_rel.r_type == MIPS_R_REFWORD);
+
+ adr = bfd_get_32 (input_bfd,
+ (contents
+ + adjust
+ + int_rel.r_vaddr
+ - input_section->vma));
+
+ for (a = ecoff_data (input_bfd)->debug_info.adjust;
+ a != (struct ecoff_value_adjust *) NULL;
+ a = a->next)
+ {
+ if (adr >= a->start && adr < a->end)
+ addend += a->adjust;
+ }
+ }
+
+ if (info->relocateable)
+ {
+ /* We are generating relocateable output, and must convert
+ the existing reloc. */
+ if (int_rel.r_extern)
+ {
+ if ((h->root.type == bfd_link_hash_defined
+ || h->root.type == bfd_link_hash_defweak)
+ && ! bfd_is_abs_section (h->root.u.def.section))
+ {
+ const char *name;
+
+ /* This symbol is defined in the output. Convert
+ the reloc from being against the symbol to being
+ against the section. */
+
+ /* Clear the r_extern bit. */
+ int_rel.r_extern = 0;
+
+ /* Compute a new r_symndx value. */
+ s = h->root.u.def.section;
+ name = bfd_get_section_name (output_bfd,
+ s->output_section);
+
+ int_rel.r_symndx = -1;
+ switch (name[1])
+ {
+ case 'b':
+ if (strcmp (name, ".bss") == 0)
+ int_rel.r_symndx = RELOC_SECTION_BSS;
+ break;
+ case 'd':
+ if (strcmp (name, ".data") == 0)
+ int_rel.r_symndx = RELOC_SECTION_DATA;
+ break;
+ case 'f':
+ if (strcmp (name, ".fini") == 0)
+ int_rel.r_symndx = RELOC_SECTION_FINI;
+ break;
+ case 'i':
+ if (strcmp (name, ".init") == 0)
+ int_rel.r_symndx = RELOC_SECTION_INIT;
+ break;
+ case 'l':
+ if (strcmp (name, ".lit8") == 0)
+ int_rel.r_symndx = RELOC_SECTION_LIT8;
+ else if (strcmp (name, ".lit4") == 0)
+ int_rel.r_symndx = RELOC_SECTION_LIT4;
+ break;
+ case 'r':
+ if (strcmp (name, ".rdata") == 0)
+ int_rel.r_symndx = RELOC_SECTION_RDATA;
+ break;
+ case 's':
+ if (strcmp (name, ".sdata") == 0)
+ int_rel.r_symndx = RELOC_SECTION_SDATA;
+ else if (strcmp (name, ".sbss") == 0)
+ int_rel.r_symndx = RELOC_SECTION_SBSS;
+ break;
+ case 't':
+ if (strcmp (name, ".text") == 0)
+ int_rel.r_symndx = RELOC_SECTION_TEXT;
+ break;
+ }
+
+ if (int_rel.r_symndx == -1)
+ abort ();
+
+ /* Add the section VMA and the symbol value. */
+ relocation = (h->root.u.def.value
+ + s->output_section->vma
+ + s->output_offset);
+
+ /* For a PC relative relocation, the object file
+ currently holds just the addend. We must adjust
+ by the address to get the right value. */
+ if (howto->pc_relative)
+ {
+ relocation -= int_rel.r_vaddr - input_section->vma;
+
+ /* If we are converting a RELHI or RELLO reloc
+ from being against an external symbol to
+ being against a section, we must put a
+ special value into the r_offset field. This
+ value is the old addend. The r_offset for
+ both the RELHI and RELLO relocs are the same,
+ and we set both when we see RELHI. */
+ if (int_rel.r_type == MIPS_R_RELHI)
+ {
+ long addhi, addlo;
+
+ addhi = bfd_get_32 (input_bfd,
+ (contents
+ + adjust
+ + int_rel.r_vaddr
+ - input_section->vma));
+ addhi &= 0xffff;
+ if (addhi & 0x8000)
+ addhi -= 0x10000;
+ addhi <<= 16;
+
+ if (! use_lo)
+ addlo = 0;
+ else
+ {
+ addlo = bfd_get_32 (input_bfd,
+ (contents
+ + adjust
+ + lo_int_rel.r_vaddr
+ - input_section->vma));
+ addlo &= 0xffff;
+ if (addlo & 0x8000)
+ addlo -= 0x10000;
+
+ lo_int_rel.r_offset = addhi + addlo;
+ }
+
+ int_rel.r_offset = addhi + addlo;
+ }
+ }
+
+ h = NULL;
+ }
+ else
+ {
+ /* Change the symndx value to the right one for the
+ output BFD. */
+ int_rel.r_symndx = h->indx;
+ if (int_rel.r_symndx == -1)
+ {
+ /* This symbol is not being written out. */
+ if (! ((*info->callbacks->unattached_reloc)
+ (info, h->root.root.string, input_bfd,
+ input_section,
+ int_rel.r_vaddr - input_section->vma)))
+ return false;
+ int_rel.r_symndx = 0;
+ }
+ relocation = 0;
+ }
+ }
+ else
+ {
+ /* This is a relocation against a section. Adjust the
+ value by the amount the section moved. */
+ relocation = (s->output_section->vma
+ + s->output_offset
+ - s->vma);
+ }
+
+ relocation += addend;
+ addend = 0;
+
+ /* Adjust a PC relative relocation by removing the reference
+ to the original address in the section and including the
+ reference to the new address. However, external RELHI
+ and RELLO relocs are PC relative, but don't include any
+ reference to the address. The addend is merely an
+ addend. */
+ if (howto->pc_relative
+ && (! int_rel.r_extern
+ || (int_rel.r_type != MIPS_R_RELHI
+ && int_rel.r_type != MIPS_R_RELLO)))
+ relocation -= (input_section->output_section->vma
+ + input_section->output_offset
+ - input_section->vma);
+
+ /* Adjust the contents. */
+ if (relocation == 0)
+ r = bfd_reloc_ok;
+ else
+ {
+ if (int_rel.r_type != MIPS_R_REFHI
+ && int_rel.r_type != MIPS_R_RELHI)
+ r = _bfd_relocate_contents (howto, input_bfd, relocation,
+ (contents
+ + adjust
+ + int_rel.r_vaddr
+ - input_section->vma));
+ else
+ {
+ mips_relocate_hi (&int_rel,
+ use_lo ? &lo_int_rel : NULL,
+ input_bfd, input_section, contents,
+ adjust, relocation,
+ int_rel.r_type == MIPS_R_RELHI);
+ r = bfd_reloc_ok;
+ }
+ }
+
+ /* Adjust the reloc address. */
+ int_rel.r_vaddr += (input_section->output_section->vma
+ + input_section->output_offset
+ - input_section->vma);
+
+ /* Save the changed reloc information. */
+ mips_ecoff_swap_reloc_out (input_bfd, &int_rel, (PTR) ext_rel);
+ }
+ else
+ {
+ /* We are producing a final executable. */
+ if (int_rel.r_extern)
+ {
+ /* This is a reloc against a symbol. */
+ if (h->root.type == bfd_link_hash_defined
+ || h->root.type == bfd_link_hash_defweak)
+ {
+ asection *hsec;
+
+ hsec = h->root.u.def.section;
+ relocation = (h->root.u.def.value
+ + hsec->output_section->vma
+ + hsec->output_offset);
+ }
+ else
+ {
+ if (! ((*info->callbacks->undefined_symbol)
+ (info, h->root.root.string, input_bfd,
+ input_section,
+ int_rel.r_vaddr - input_section->vma, true)))
+ return false;
+ relocation = 0;
+ }
+ }
+ else
+ {
+ /* This is a reloc against a section. */
+ relocation = (s->output_section->vma
+ + s->output_offset
+ - s->vma);
+
+ /* A PC relative reloc is already correct in the object
+ file. Make it look like a pcrel_offset relocation by
+ adding in the start address. */
+ if (howto->pc_relative)
+ {
+ if (int_rel.r_type != MIPS_R_RELHI || ! use_lo)
+ relocation += int_rel.r_vaddr + adjust;
+ else
+ relocation += lo_int_rel.r_vaddr + adjust;
+ }
+ }
+
+ if (int_rel.r_type != MIPS_R_REFHI
+ && int_rel.r_type != MIPS_R_RELHI)
+ r = _bfd_final_link_relocate (howto,
+ input_bfd,
+ input_section,
+ contents,
+ (int_rel.r_vaddr
+ - input_section->vma
+ + adjust),
+ relocation,
+ addend);
+ else
+ {
+ mips_relocate_hi (&int_rel,
+ use_lo ? &lo_int_rel : NULL,
+ input_bfd, input_section, contents, adjust,
+ relocation,
+ int_rel.r_type == MIPS_R_RELHI);
+ r = bfd_reloc_ok;
+ }
+ }
+
+ /* MIPS_R_JMPADDR requires peculiar overflow detection. The
+ instruction provides a 28 bit address (the two lower bits are
+ implicit zeroes) which is combined with the upper four bits
+ of the instruction address. */
+ if (r == bfd_reloc_ok
+ && int_rel.r_type == MIPS_R_JMPADDR
+ && (((relocation
+ + addend
+ + (int_rel.r_extern ? 0 : s->vma))
+ & 0xf0000000)
+ != ((input_section->output_section->vma
+ + input_section->output_offset
+ + (int_rel.r_vaddr - input_section->vma)
+ + adjust)
+ & 0xf0000000)))
+ r = bfd_reloc_overflow;
+
+ if (r != bfd_reloc_ok)
+ {
+ switch (r)
+ {
+ default:
+ case bfd_reloc_outofrange:
+ abort ();
+ case bfd_reloc_overflow:
+ {
+ const char *name;
+
+ if (int_rel.r_extern)
+ name = h->root.root.string;
+ else
+ name = bfd_section_name (input_bfd, s);
+ if (! ((*info->callbacks->reloc_overflow)
+ (info, name, howto->name, (bfd_vma) 0,
+ input_bfd, input_section,
+ int_rel.r_vaddr - input_section->vma)))
+ return false;
+ }
+ break;
+ }
+ }
+ }
+
+ return true;
+}
+\f
+/* Read in the relocs for a section. */
+
+static boolean
+mips_read_relocs (abfd, sec)
+ bfd *abfd;
+ asection *sec;
+{
+ struct ecoff_section_tdata *section_tdata;
+
+ section_tdata = ecoff_section_data (abfd, sec);
+ if (section_tdata == (struct ecoff_section_tdata *) NULL)
+ {
+ sec->used_by_bfd =
+ (PTR) bfd_alloc (abfd, sizeof (struct ecoff_section_tdata));
+ if (sec->used_by_bfd == NULL)
+ return false;
+
+ section_tdata = ecoff_section_data (abfd, sec);
+ section_tdata->external_relocs = NULL;
+ section_tdata->contents = NULL;
+ section_tdata->offsets = NULL;
+ }
+
+ if (section_tdata->external_relocs == NULL)
+ {
+ bfd_size_type external_relocs_size;
+
+ external_relocs_size = (ecoff_backend (abfd)->external_reloc_size
+ * sec->reloc_count);
+
+ section_tdata->external_relocs =
+ (PTR) bfd_alloc (abfd, external_relocs_size);
+ if (section_tdata->external_relocs == NULL && external_relocs_size != 0)
+ return false;
+
+ if (bfd_seek (abfd, sec->rel_filepos, SEEK_SET) != 0
+ || (bfd_read (section_tdata->external_relocs, 1,
+ external_relocs_size, abfd)
+ != external_relocs_size))
+ return false;
+ }
+
+ return true;
+}
+
+/* Relax a section when linking a MIPS ECOFF file. This is used for
+ embedded PIC code, which always uses PC relative branches which
+ only have an 18 bit range on MIPS. If a branch is not in range, we
+ generate a long instruction sequence to compensate. Each time we
+ find a branch to expand, we have to check all the others again to
+ make sure they are still in range. This is slow, but it only has
+ to be done when -relax is passed to the linker.
+
+ This routine figures out which branches need to expand; the actual
+ expansion is done in mips_relocate_section when the section
+ contents are relocated. The information is stored in the offsets
+ field of the ecoff_section_tdata structure. An offset of 1 means
+ that the branch must be expanded into a multi-instruction PC
+ relative branch (such an offset will only occur for a PC relative
+ branch to an external symbol). Any other offset must be a multiple
+ of four, and is the amount to change the branch by (such an offset
+ will only occur for a PC relative branch within the same section).
+
+ We do not modify the section relocs or contents themselves so that
+ if memory usage becomes an issue we can discard them and read them
+ again. The only information we must save in memory between this
+ routine and the mips_relocate_section routine is the table of
+ offsets. */
+
+static boolean
+mips_relax_section (abfd, sec, info, again)
+ bfd *abfd;
+ asection *sec;
+ struct bfd_link_info *info;
+ boolean *again;
+{
+ struct ecoff_section_tdata *section_tdata;
+ bfd_byte *contents = NULL;
+ long *offsets;
+ struct external_reloc *ext_rel;
+ struct external_reloc *ext_rel_end;
+ unsigned int i;
+
+ /* Assume we are not going to need another pass. */
+ *again = false;
+
+ /* If we are not generating an ECOFF file, this is much too
+ confusing to deal with. */
+ if (info->hash->creator->flavour != bfd_get_flavour (abfd))
+ return true;
+
+ /* If there are no relocs, there is nothing to do. */
+ if (sec->reloc_count == 0)
+ return true;
+
+ /* We are only interested in PC relative relocs, and why would there
+ ever be one from anything but the .text section? */
+ if (strcmp (bfd_get_section_name (abfd, sec), ".text") != 0)
+ return true;
+
+ /* Read in the relocs, if we haven't already got them. */
+ section_tdata = ecoff_section_data (abfd, sec);
+ if (section_tdata == (struct ecoff_section_tdata *) NULL
+ || section_tdata->external_relocs == NULL)
+ {
+ if (! mips_read_relocs (abfd, sec))
+ goto error_return;
+ section_tdata = ecoff_section_data (abfd, sec);
+ }
+
+ if (sec->_cooked_size == 0)
+ {
+ /* We must initialize _cooked_size only the first time we are
+ called. */
+ sec->_cooked_size = sec->_raw_size;
+ }
+
+ contents = section_tdata->contents;
+ offsets = section_tdata->offsets;
+
+ /* Look for any external PC relative relocs. Internal PC relative
+ relocs are already correct in the object file, so they certainly
+ can not overflow. */
+ ext_rel = (struct external_reloc *) section_tdata->external_relocs;
+ ext_rel_end = ext_rel + sec->reloc_count;
+ for (i = 0; ext_rel < ext_rel_end; ext_rel++, i++)
+ {
+ struct internal_reloc int_rel;
+ struct ecoff_link_hash_entry *h;
+ asection *hsec;
+ bfd_signed_vma relocation;
+ struct external_reloc *adj_ext_rel;
+ unsigned int adj_i;
+ unsigned long ext_count;
+ struct ecoff_link_hash_entry **adj_h_ptr;
+ struct ecoff_link_hash_entry **adj_h_ptr_end;
+ struct ecoff_value_adjust *adjust;
+
+ /* If we have already expanded this reloc, we certainly don't
+ need to do it again. */
+ if (offsets != (long *) NULL && offsets[i] == 1)
+ continue;
+
+ /* Quickly check that this reloc is external PCREL16. */
+ if (bfd_header_big_endian (abfd))
+ {
+ if ((ext_rel->r_bits[3] & RELOC_BITS3_EXTERN_BIG) == 0
+ || (((ext_rel->r_bits[3] & RELOC_BITS3_TYPE_BIG)
+ >> RELOC_BITS3_TYPE_SH_BIG)
+ != MIPS_R_PCREL16))
+ continue;
+ }
+ else
+ {
+ if ((ext_rel->r_bits[3] & RELOC_BITS3_EXTERN_LITTLE) == 0
+ || (((ext_rel->r_bits[3] & RELOC_BITS3_TYPE_LITTLE)
+ >> RELOC_BITS3_TYPE_SH_LITTLE)
+ != MIPS_R_PCREL16))
+ continue;
+ }
+
+ mips_ecoff_swap_reloc_in (abfd, (PTR) ext_rel, &int_rel);
+
+ h = ecoff_data (abfd)->sym_hashes[int_rel.r_symndx];
+ if (h == (struct ecoff_link_hash_entry *) NULL)
+ abort ();
+
+ if (h->root.type != bfd_link_hash_defined
+ && h->root.type != bfd_link_hash_defweak)
+ {
+ /* Just ignore undefined symbols. These will presumably
+ generate an error later in the link. */
+ continue;
+ }
+
+ /* Get the value of the symbol. */
+ hsec = h->root.u.def.section;
+ relocation = (h->root.u.def.value
+ + hsec->output_section->vma
+ + hsec->output_offset);
+
+ /* Subtract out the current address. */
+ relocation -= (sec->output_section->vma
+ + sec->output_offset
+ + (int_rel.r_vaddr - sec->vma));
+
+ /* The addend is stored in the object file. In the normal case
+ of ``bal symbol'', the addend will be -4. It will only be
+ different in the case of ``bal symbol+constant''. To avoid
+ always reading in the section contents, we don't check the
+ addend in the object file (we could easily check the contents
+ if we happen to have already read them in, but I fear that
+ this could be confusing). This means we will screw up if
+ there is a branch to a symbol that is in range, but added to
+ a constant which puts it out of range; in such a case the
+ link will fail with a reloc overflow error. Since the
+ compiler will never generate such code, it should be easy
+ enough to work around it by changing the assembly code in the
+ source file. */
+ relocation -= 4;
+
+ /* Now RELOCATION is the number we want to put in the object
+ file. See whether it fits. */
+ if (relocation >= -0x20000 && relocation < 0x20000)
+ continue;
+
+ /* Now that we know this reloc needs work, which will rarely
+ happen, go ahead and grab the section contents. */
+ if (contents == (bfd_byte *) NULL)
+ {
+ if (info->keep_memory)
+ contents = (bfd_byte *) bfd_alloc (abfd, sec->_raw_size);
+ else
+ contents = (bfd_byte *) bfd_malloc ((size_t) sec->_raw_size);
+ if (contents == (bfd_byte *) NULL)
+ goto error_return;
+ if (! bfd_get_section_contents (abfd, sec, (PTR) contents,
+ (file_ptr) 0, sec->_raw_size))
+ goto error_return;
+ if (info->keep_memory)
+ section_tdata->contents = contents;
+ }
+
+ /* We only support changing the bal instruction. It would be
+ possible to handle other PC relative branches, but some of
+ them (the conditional branches) would require a different
+ length instruction sequence which would complicate both this
+ routine and mips_relax_pcrel16. It could be written if
+ somebody felt it were important. Ignoring this reloc will
+ presumably cause a reloc overflow error later on. */
+ if (bfd_get_32 (abfd, contents + int_rel.r_vaddr - sec->vma)
+ != 0x0411ffff) /* bgezal $0,. == bal . */
+ continue;
+
+ /* Bother. We need to expand this reloc, and we will need to
+ make another relaxation pass since this change may put other
+ relocs out of range. We need to examine the local branches
+ and we need to allocate memory to hold the offsets we must
+ add to them. We also need to adjust the values of all
+ symbols in the object file following this location. */
+
+ sec->_cooked_size += PCREL16_EXPANSION_ADJUSTMENT;
+ *again = true;
+
+ if (offsets == (long *) NULL)
+ {
+ size_t size;
+
+ size = sec->reloc_count * sizeof (long);
+ offsets = (long *) bfd_alloc (abfd, size);
+ if (offsets == (long *) NULL)
+ goto error_return;
+ memset (offsets, 0, size);
+ section_tdata->offsets = offsets;
+ }
+
+ offsets[i] = 1;
+
+ /* Now look for all PC relative references that cross this reloc
+ and adjust their offsets. */
+ adj_ext_rel = (struct external_reloc *) section_tdata->external_relocs;
+ for (adj_i = 0; adj_ext_rel < ext_rel_end; adj_ext_rel++, adj_i++)
+ {
+ struct internal_reloc adj_int_rel;
+ bfd_vma start, stop;
+ int change;
+
+ mips_ecoff_swap_reloc_in (abfd, (PTR) adj_ext_rel, &adj_int_rel);
+
+ if (adj_int_rel.r_type == MIPS_R_PCREL16)
+ {
+ unsigned long insn;
+
+ /* We only care about local references. External ones
+ will be relocated correctly anyhow. */
+ if (adj_int_rel.r_extern)
+ continue;
+
+ /* We are only interested in a PC relative reloc within
+ this section. FIXME: Cross section PC relative
+ relocs may not be handled correctly; does anybody
+ care? */
+ if (adj_int_rel.r_symndx != RELOC_SECTION_TEXT)
+ continue;
+
+ start = adj_int_rel.r_vaddr;
+
+ insn = bfd_get_32 (abfd,
+ contents + adj_int_rel.r_vaddr - sec->vma);
+
+ stop = (insn & 0xffff) << 2;
+ if ((stop & 0x20000) != 0)
+ stop -= 0x40000;
+ stop += adj_int_rel.r_vaddr + 4;
+ }
+ else if (adj_int_rel.r_type == MIPS_R_RELHI)
+ {
+ struct internal_reloc rello;
+ long addhi, addlo;
+
+ /* The next reloc must be MIPS_R_RELLO, and we handle
+ them together. */
+ BFD_ASSERT (adj_ext_rel + 1 < ext_rel_end);
+
+ mips_ecoff_swap_reloc_in (abfd, (PTR) (adj_ext_rel + 1), &rello);
+
+ BFD_ASSERT (rello.r_type == MIPS_R_RELLO);
+
+ addhi = bfd_get_32 (abfd,
+ contents + adj_int_rel.r_vaddr - sec->vma);
+ addhi &= 0xffff;
+ if (addhi & 0x8000)
+ addhi -= 0x10000;
+ addhi <<= 16;
+
+ addlo = bfd_get_32 (abfd, contents + rello.r_vaddr - sec->vma);
+ addlo &= 0xffff;
+ if (addlo & 0x8000)
+ addlo -= 0x10000;
+
+ if (adj_int_rel.r_extern)
+ {
+ /* The value we want here is
+ sym - RELLOaddr + addend
+ which we can express as
+ sym - (RELLOaddr - addend)
+ Therefore if we are expanding the area between
+ RELLOaddr and RELLOaddr - addend we must adjust
+ the addend. This is admittedly ambiguous, since
+ we might mean (sym + addend) - RELLOaddr, but in
+ practice we don't, and there is no way to handle
+ that case correctly since at this point we have
+ no idea whether any reloc is being expanded
+ between sym and sym + addend. */
+ start = rello.r_vaddr - (addhi + addlo);
+ stop = rello.r_vaddr;
+ }
+ else
+ {
+ /* An internal RELHI/RELLO pair represents the
+ difference between two addresses, $LC0 - foo.
+ The symndx value is actually the difference
+ between the reloc address and $LC0. This lets us
+ compute $LC0, and, by considering the addend,
+ foo. If the reloc we are expanding falls between
+ those two relocs, we must adjust the addend. At
+ this point, the symndx value is actually in the
+ r_offset field, where it was put by
+ mips_ecoff_swap_reloc_in. */
+ start = rello.r_vaddr - adj_int_rel.r_offset;
+ stop = start + addhi + addlo;
+ }
+ }
+ else if (adj_int_rel.r_type == MIPS_R_SWITCH)
+ {
+ /* A MIPS_R_SWITCH reloc represents a word of the form
+ .word $L3-$LS12
+ The value in the object file is correct, assuming the
+ original value of $L3. The symndx value is actually
+ the difference between the reloc address and $LS12.
+ This lets us compute the original value of $LS12 as
+ vaddr - symndx
+ and the original value of $L3 as
+ vaddr - symndx + addend
+ where addend is the value from the object file. At
+ this point, the symndx value is actually found in the
+ r_offset field, since it was moved by
+ mips_ecoff_swap_reloc_in. */
+ start = adj_int_rel.r_vaddr - adj_int_rel.r_offset;
+ stop = start + bfd_get_32 (abfd,
+ (contents
+ + adj_int_rel.r_vaddr
+ - sec->vma));
+ }
+ else
+ continue;
+
+ /* If the range expressed by this reloc, which is the
+ distance between START and STOP crosses the reloc we are
+ expanding, we must adjust the offset. The sign of the
+ adjustment depends upon the direction in which the range
+ crosses the reloc being expanded. */
+ if (start <= int_rel.r_vaddr && stop > int_rel.r_vaddr)
+ change = PCREL16_EXPANSION_ADJUSTMENT;
+ else if (start > int_rel.r_vaddr && stop <= int_rel.r_vaddr)
+ change = - PCREL16_EXPANSION_ADJUSTMENT;
+ else
+ change = 0;
+
+ offsets[adj_i] += change;
+
+ if (adj_int_rel.r_type == MIPS_R_RELHI)
+ {
+ adj_ext_rel++;
+ adj_i++;
+ offsets[adj_i] += change;
+ }
+ }
+
+ /* Find all symbols in this section defined by this object file
+ and adjust their values. Note that we decide whether to
+ adjust the value based on the value stored in the ECOFF EXTR
+ structure, because the value stored in the hash table may
+ have been changed by an earlier expanded reloc and thus may
+ no longer correctly indicate whether the symbol is before or
+ after the expanded reloc. */
+ ext_count = ecoff_data (abfd)->debug_info.symbolic_header.iextMax;
+ adj_h_ptr = ecoff_data (abfd)->sym_hashes;
+ adj_h_ptr_end = adj_h_ptr + ext_count;
+ for (; adj_h_ptr < adj_h_ptr_end; adj_h_ptr++)
+ {
+ struct ecoff_link_hash_entry *adj_h;
+
+ adj_h = *adj_h_ptr;
+ if (adj_h != (struct ecoff_link_hash_entry *) NULL
+ && (adj_h->root.type == bfd_link_hash_defined
+ || adj_h->root.type == bfd_link_hash_defweak)
+ && adj_h->root.u.def.section == sec
+ && adj_h->esym.asym.value > int_rel.r_vaddr)
+ adj_h->root.u.def.value += PCREL16_EXPANSION_ADJUSTMENT;
+ }
+
+ /* Add an entry to the symbol value adjust list. This is used
+ by bfd_ecoff_debug_accumulate to adjust the values of
+ internal symbols and FDR's. */
+ adjust = ((struct ecoff_value_adjust *)
+ bfd_alloc (abfd, sizeof (struct ecoff_value_adjust)));
+ if (adjust == (struct ecoff_value_adjust *) NULL)
+ goto error_return;
+
+ adjust->start = int_rel.r_vaddr;
+ adjust->end = sec->vma + sec->_raw_size;
+ adjust->adjust = PCREL16_EXPANSION_ADJUSTMENT;
+
+ adjust->next = ecoff_data (abfd)->debug_info.adjust;
+ ecoff_data (abfd)->debug_info.adjust = adjust;
+ }
+
+ if (contents != (bfd_byte *) NULL && ! info->keep_memory)
+ free (contents);
+
+ return true;
+
+ error_return:
+ if (contents != (bfd_byte *) NULL && ! info->keep_memory)
+ free (contents);
+ return false;
+}
+
+/* This routine is called from mips_relocate_section when a PC
+ relative reloc must be expanded into the five instruction sequence.
+ It handles all the details of the expansion, including resolving
+ the reloc. */
+
+static boolean
+mips_relax_pcrel16 (info, input_bfd, input_section, h, location, address)
+ struct bfd_link_info *info ATTRIBUTE_UNUSED;
+ bfd *input_bfd;
+ asection *input_section ATTRIBUTE_UNUSED;
+ struct ecoff_link_hash_entry *h;
+ bfd_byte *location;
+ bfd_vma address;
+{
+ bfd_vma relocation;
+
+ /* 0x0411ffff is bgezal $0,. == bal . */
+ BFD_ASSERT (bfd_get_32 (input_bfd, location) == 0x0411ffff);
+
+ /* We need to compute the distance between the symbol and the
+ current address plus eight. */
+ relocation = (h->root.u.def.value
+ + h->root.u.def.section->output_section->vma
+ + h->root.u.def.section->output_offset);
+ relocation -= address + 8;
+
+ /* If the lower half is negative, increment the upper 16 half. */
+ if ((relocation & 0x8000) != 0)
+ relocation += 0x10000;
+
+ bfd_put_32 (input_bfd, 0x04110001, location); /* bal .+8 */
+ bfd_put_32 (input_bfd,
+ 0x3c010000 | ((relocation >> 16) & 0xffff), /* lui $at,XX */
+ location + 4);
+ bfd_put_32 (input_bfd,
+ 0x24210000 | (relocation & 0xffff), /* addiu $at,$at,XX */
+ location + 8);
+ bfd_put_32 (input_bfd, 0x003f0821, location + 12); /* addu $at,$at,$ra */
+ bfd_put_32 (input_bfd, 0x0020f809, location + 16); /* jalr $at */
+
+ return true;
+}
+
+/* Given a .sdata section and a .rel.sdata in-memory section, store
+ relocation information into the .rel.sdata section which can be
+ used at runtime to relocate the section. This is called by the
+ linker when the --embedded-relocs switch is used. This is called
+ after the add_symbols entry point has been called for all the
+ objects, and before the final_link entry point is called. This
+ function presumes that the object was compiled using
+ -membedded-pic. */
+
+boolean
+bfd_mips_ecoff_create_embedded_relocs (abfd, info, datasec, relsec, errmsg)
+ bfd *abfd;
+ struct bfd_link_info *info;
+ asection *datasec;
+ asection *relsec;
+ char **errmsg;
+{
+ struct ecoff_link_hash_entry **sym_hashes;
+ struct ecoff_section_tdata *section_tdata;
+ struct external_reloc *ext_rel;
+ struct external_reloc *ext_rel_end;
+ bfd_byte *p;
+
+ BFD_ASSERT (! info->relocateable);
+
+ *errmsg = NULL;
+
+ if (datasec->reloc_count == 0)
+ return true;
+
+ sym_hashes = ecoff_data (abfd)->sym_hashes;
+
+ if (! mips_read_relocs (abfd, datasec))
+ return false;
+
+ relsec->contents = (bfd_byte *) bfd_alloc (abfd, datasec->reloc_count * 4);
+ if (relsec->contents == NULL)
+ return false;
+
+ p = relsec->contents;
+
+ section_tdata = ecoff_section_data (abfd, datasec);
+ ext_rel = (struct external_reloc *) section_tdata->external_relocs;
+ ext_rel_end = ext_rel + datasec->reloc_count;
+ for (; ext_rel < ext_rel_end; ext_rel++, p += 4)
+ {
+ struct internal_reloc int_rel;
+ boolean text_relative;
+
+ mips_ecoff_swap_reloc_in (abfd, (PTR) ext_rel, &int_rel);
+
+ /* We are going to write a four byte word into the runtime reloc
+ section. The word will be the address in the data section
+ which must be relocated. This must be on a word boundary,
+ which means the lower two bits must be zero. We use the
+ least significant bit to indicate how the value in the data
+ section must be relocated. A 0 means that the value is
+ relative to the text section, while a 1 indicates that the
+ value is relative to the data section. Given that we are
+ assuming the code was compiled using -membedded-pic, there
+ should not be any other possibilities. */
+
+ /* We can only relocate REFWORD relocs at run time. */
+ if (int_rel.r_type != MIPS_R_REFWORD)
+ {
+ *errmsg = _("unsupported reloc type");
+ bfd_set_error (bfd_error_bad_value);
+ return false;
+ }
+
+ if (int_rel.r_extern)
+ {
+ struct ecoff_link_hash_entry *h;
+
+ h = sym_hashes[int_rel.r_symndx];
+ /* If h is NULL, that means that there is a reloc against an
+ external symbol which we thought was just a debugging
+ symbol. This should not happen. */
+ if (h == (struct ecoff_link_hash_entry *) NULL)
+ abort ();
+ if ((h->root.type == bfd_link_hash_defined
+ || h->root.type == bfd_link_hash_defweak)
+ && (h->root.u.def.section->flags & SEC_CODE) != 0)
+ text_relative = true;
+ else
+ text_relative = false;
+ }
+ else
+ {
+ switch (int_rel.r_symndx)
+ {
+ case RELOC_SECTION_TEXT:
+ text_relative = true;
+ break;
+ case RELOC_SECTION_SDATA:
+ case RELOC_SECTION_SBSS:
+ case RELOC_SECTION_LIT8:
+ text_relative = false;
+ break;
+ default:
+ /* No other sections should appear in -membedded-pic
+ code. */
+ *errmsg = _("reloc against unsupported section");
+ bfd_set_error (bfd_error_bad_value);
+ return false;
+ }
+ }
+
+ if ((int_rel.r_offset & 3) != 0)
+ {
+ *errmsg = _("reloc not properly aligned");
+ bfd_set_error (bfd_error_bad_value);
+ return false;
+ }
+
+ bfd_put_32 (abfd,
+ (int_rel.r_vaddr - datasec->vma + datasec->output_offset
+ + (text_relative ? 0 : 1)),
+ p);
+ }
+
+ return true;
+}
+\f
+/* This is the ECOFF backend structure. The backend field of the
+ target vector points to this. */
+
+static const struct ecoff_backend_data mips_ecoff_backend_data =
+{
+ /* COFF backend structure. */
+ {
+ (void (*) PARAMS ((bfd *,PTR,int,int,int,int,PTR))) bfd_void, /* aux_in */
+ (void (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* sym_in */
+ (void (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* lineno_in */
+ (unsigned (*) PARAMS ((bfd *,PTR,int,int,int,int,PTR)))bfd_void,/*aux_out*/
+ (unsigned (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* sym_out */
+ (unsigned (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* lineno_out */
+ (unsigned (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* reloc_out */
+ mips_ecoff_swap_filehdr_out, mips_ecoff_swap_aouthdr_out,
+ mips_ecoff_swap_scnhdr_out,
+ FILHSZ, AOUTSZ, SCNHSZ, 0, 0, 0, 0, FILNMLEN, true, false, 4, false, 2,
+ mips_ecoff_swap_filehdr_in, mips_ecoff_swap_aouthdr_in,
+ mips_ecoff_swap_scnhdr_in, NULL,
+ mips_ecoff_bad_format_hook, _bfd_ecoff_set_arch_mach_hook,
+ _bfd_ecoff_mkobject_hook, _bfd_ecoff_styp_to_sec_flags,
+ _bfd_ecoff_set_alignment_hook, _bfd_ecoff_slurp_symbol_table,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL
+ },
+ /* Supported architecture. */
+ bfd_arch_mips,
+ /* Initial portion of armap string. */
+ "__________",
+ /* The page boundary used to align sections in a demand-paged
+ executable file. E.g., 0x1000. */
+ 0x1000,
+ /* True if the .rdata section is part of the text segment, as on the
+ Alpha. False if .rdata is part of the data segment, as on the
+ MIPS. */
+ false,
+ /* Bitsize of constructor entries. */
+ 32,
+ /* Reloc to use for constructor entries. */
+ &mips_howto_table[MIPS_R_REFWORD],
+ {
+ /* Symbol table magic number. */
+ magicSym,
+ /* Alignment of debugging information. E.g., 4. */
+ 4,
+ /* Sizes of external symbolic information. */
+ sizeof (struct hdr_ext),
+ sizeof (struct dnr_ext),
+ sizeof (struct pdr_ext),
+ sizeof (struct sym_ext),
+ sizeof (struct opt_ext),
+ sizeof (struct fdr_ext),
+ sizeof (struct rfd_ext),
+ sizeof (struct ext_ext),
+ /* Functions to swap in external symbolic data. */
+ ecoff_swap_hdr_in,
+ ecoff_swap_dnr_in,
+ ecoff_swap_pdr_in,
+ ecoff_swap_sym_in,
+ ecoff_swap_opt_in,
+ ecoff_swap_fdr_in,
+ ecoff_swap_rfd_in,
+ ecoff_swap_ext_in,
+ _bfd_ecoff_swap_tir_in,
+ _bfd_ecoff_swap_rndx_in,
+ /* Functions to swap out external symbolic data. */
+ ecoff_swap_hdr_out,
+ ecoff_swap_dnr_out,
+ ecoff_swap_pdr_out,
+ ecoff_swap_sym_out,
+ ecoff_swap_opt_out,
+ ecoff_swap_fdr_out,
+ ecoff_swap_rfd_out,
+ ecoff_swap_ext_out,
+ _bfd_ecoff_swap_tir_out,
+ _bfd_ecoff_swap_rndx_out,
+ /* Function to read in symbolic data. */
+ _bfd_ecoff_slurp_symbolic_info
+ },
+ /* External reloc size. */
+ RELSZ,
+ /* Reloc swapping functions. */
+ mips_ecoff_swap_reloc_in,
+ mips_ecoff_swap_reloc_out,
+ /* Backend reloc tweaking. */
+ mips_adjust_reloc_in,
+ mips_adjust_reloc_out,
+ /* Relocate section contents while linking. */
+ mips_relocate_section,
+ /* Do final adjustments to filehdr and aouthdr. */
+ NULL,
+ /* Read an element from an archive at a given file position. */
+ _bfd_get_elt_at_filepos
+};
+
+/* Looking up a reloc type is MIPS specific. */
+#define _bfd_ecoff_bfd_reloc_type_lookup mips_bfd_reloc_type_lookup
+
+/* Getting relocated section contents is generic. */
+#define _bfd_ecoff_bfd_get_relocated_section_contents \
+ bfd_generic_get_relocated_section_contents
+
+/* Handling file windows is generic. */
+#define _bfd_ecoff_get_section_contents_in_window \
+ _bfd_generic_get_section_contents_in_window
+
+/* Relaxing sections is MIPS specific. */
+#define _bfd_ecoff_bfd_relax_section mips_relax_section
+
+/* GC of sections is not done. */
+#define _bfd_ecoff_bfd_gc_sections bfd_generic_gc_sections
+
+extern const bfd_target ecoff_big_vec;
+
+const bfd_target ecoff_little_vec =
+{
+ "ecoff-littlemips", /* name */
+ bfd_target_ecoff_flavour,
+ BFD_ENDIAN_LITTLE, /* data byte order is little */
+ BFD_ENDIAN_LITTLE, /* header byte order is little */
+
+ (HAS_RELOC | EXEC_P | /* object flags */
+ HAS_LINENO | HAS_DEBUG |
+ HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+
+ (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
+ 0, /* leading underscore */
+ ' ', /* ar_pad_char */
+ 15, /* ar_max_namelen */
+ bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+ bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+ bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
+ bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+ bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+ bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
+
+ {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+ _bfd_ecoff_archive_p, _bfd_dummy_target},
+ {bfd_false, _bfd_ecoff_mkobject, /* bfd_set_format */
+ _bfd_generic_mkarchive, bfd_false},
+ {bfd_false, _bfd_ecoff_write_object_contents, /* bfd_write_contents */
+ _bfd_write_archive_contents, bfd_false},
+
+ BFD_JUMP_TABLE_GENERIC (_bfd_ecoff),
+ BFD_JUMP_TABLE_COPY (_bfd_ecoff),
+ BFD_JUMP_TABLE_CORE (_bfd_nocore),
+ BFD_JUMP_TABLE_ARCHIVE (_bfd_ecoff),
+ BFD_JUMP_TABLE_SYMBOLS (_bfd_ecoff),
+ BFD_JUMP_TABLE_RELOCS (_bfd_ecoff),
+ BFD_JUMP_TABLE_WRITE (_bfd_ecoff),
+ BFD_JUMP_TABLE_LINK (_bfd_ecoff),
+ BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+ & ecoff_big_vec,
+
+ (PTR) &mips_ecoff_backend_data
+};
+
+const bfd_target ecoff_big_vec =
+{
+ "ecoff-bigmips", /* name */
+ bfd_target_ecoff_flavour,
+ BFD_ENDIAN_BIG, /* data byte order is big */
+ BFD_ENDIAN_BIG, /* header byte order is big */
+
+ (HAS_RELOC | EXEC_P | /* object flags */
+ HAS_LINENO | HAS_DEBUG |
+ HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+
+ (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
+ 0, /* leading underscore */
+ ' ', /* ar_pad_char */
+ 15, /* ar_max_namelen */
+ bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+ bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+ bfd_getb16, bfd_getb_signed_16, bfd_putb16,
+ bfd_getb64, bfd_getb_signed_64, bfd_putb64,
+ bfd_getb32, bfd_getb_signed_32, bfd_putb32,
+ bfd_getb16, bfd_getb_signed_16, bfd_putb16,
+ {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
+ _bfd_ecoff_archive_p, _bfd_dummy_target},
+ {bfd_false, _bfd_ecoff_mkobject, /* bfd_set_format */
+ _bfd_generic_mkarchive, bfd_false},
+ {bfd_false, _bfd_ecoff_write_object_contents, /* bfd_write_contents */
+ _bfd_write_archive_contents, bfd_false},
+
+ BFD_JUMP_TABLE_GENERIC (_bfd_ecoff),
+ BFD_JUMP_TABLE_COPY (_bfd_ecoff),
+ BFD_JUMP_TABLE_CORE (_bfd_nocore),
+ BFD_JUMP_TABLE_ARCHIVE (_bfd_ecoff),
+ BFD_JUMP_TABLE_SYMBOLS (_bfd_ecoff),
+ BFD_JUMP_TABLE_RELOCS (_bfd_ecoff),
+ BFD_JUMP_TABLE_WRITE (_bfd_ecoff),
+ BFD_JUMP_TABLE_LINK (_bfd_ecoff),
+ BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
+
+ & ecoff_little_vec,
+
+ (PTR) &mips_ecoff_backend_data