-# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999
+# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
arguments="--host=$host_alias $arguments"
else
echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2
arguments="--host=$host_alias $arguments"
else
echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2
configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
-topsrcdir=`cd \`dirname ${progname}\`; pwd`
+## the sed command below emulates the dirname command
+topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; pwd`
# Note that under many versions of sh a trap handler for 0 will *override* any
# exit status you explicitly specify! At this point, the only non-error exit
# is at the end of the script; these actions are duplicated there, minus
# the "exit 1". Don't use "exit 0" anywhere after this without resetting the
# trap handler, or you'll lose.
# Note that under many versions of sh a trap handler for 0 will *override* any
# exit status you explicitly specify! At this point, the only non-error exit
# is at the end of the script; these actions are duplicated there, minus
# the "exit 1". Don't use "exit 0" anywhere after this without resetting the
# trap handler, or you'll lose.
# split ${srcdir}/configure.in into common, per-host, per-target,
# and post-target parts. Post-target is optional.
# split ${srcdir}/configure.in into common, per-host, per-target,
# and post-target parts. Post-target is optional.
# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
# and reset the trap handler.
trap 0
# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
# and reset the trap handler.
trap 0
# Execute the final clean-up actions
${config_shell} skip-this-dir
# and stop configuring this directory.
# Execute the final clean-up actions
${config_shell} skip-this-dir
# and stop configuring this directory.
target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
target=${target_cpu}-${target_vendor}-${target_os}
target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
target=${target_cpu}-${target_vendor}-${target_os}
-if [ x${target} != x${build} -a x${build} = x${host} ]; then
- if [ x${gcc_version} != x -a ! -d ${prefix}/lib/gcc-lib/${target_alias}/${gcc_version} ]; then
- echo "Please create the directory:" 1>&2
- echo 1>&2
- echo " ${prefix}/lib/gcc-lib/${target_alias}/${gcc_version}" 1>&2
- echo 1>&2
- echo "first for successful cross-compilation." 1>&2
- exit 1
- fi
-fi
-
# are not the same, we set reasonable default values for the tools.
tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
# are not the same, we set reasonable default values for the tools.
tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET HOST_PREFIX"
tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET HOST_PREFIX"
tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
DLLTOOL=${DLLTOOL-${host_alias}-dlltool}
DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool}
GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
DLLTOOL=${DLLTOOL-${host_alias}-dlltool}
DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool}
GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
WINDRES=${WINDRES-${host_alias}-windres}
WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
WINDRES=${WINDRES-${host_alias}-windres}
WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
-# FIXME: This should be in configure.in, not configure
-case "$host" in
- *go32*)
- enable_gdbtk=no ;;
- *msdosdjgpp*)
- enable_gdbtk=no ;;
-esac
-
-# FIXME: This should be in configure.in, not configure
-# Determine whether gdb needs tk/tcl or not.
-if [ "$enable_gdbtk" != "no" ]; then
- GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui"
-else
- GDB_TK=""
+all_build_modules=
+if test x"${build_alias}" != x"${host_alias}"
+then
+ all_build_modules='$(ALL_BUILD_MODULES_LIST)'
*) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
esac
case "${target_makefile_frag}" in
"") ;;
*) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
esac
case "${target_makefile_frag}" in
"") ;;
*) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
esac
case "${host_makefile_frag}" in
"") ;;
*) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
esac
case "${host_makefile_frag}" in
"") ;;
- # record if we want to build shared libs.
- if test -z "${enable_shared}"; then
- echo enable_shared = no >> ${Makefile}
- else
- echo enable_shared = ${enable_shared} >> ${Makefile}
- fi
+ echo enable_shared = ${enable_shared} >> ${Makefile}
+ echo enable_threads = ${enable_threads} >> ${Makefile}
# record if we want to rumtime library stuff installed in libsubdir.
if test -z "${enable_version_specific_runtime_libs}"; then
echo enable_version_specific_runtime_libs = no >> ${Makefile}
# record if we want to rumtime library stuff installed in libsubdir.
if test -z "${enable_version_specific_runtime_libs}"; then
echo enable_version_specific_runtime_libs = no >> ${Makefile}
- sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
- -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
+ sedtemp=sed.$$
+ cat >$sedtemp <<EOF
+s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:
+s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:
+EOF
+ sed -f $sedtemp \
-e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \
-e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \
-e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \
-e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \
-e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \
-e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \
-e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
-e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
-e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \
-e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
-e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
-e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \
-e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
-e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
-e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
-e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
-e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
-e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
### figure out what to do with srcdir
case "${srcdir}" in
".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
### figure out what to do with srcdir
case "${srcdir}" in
".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
- /*) recprog=${progname} ;;
- ?:*) recprog=${progname} ;;
- *) recprog=../${progname} ;;
+ /* | [A-Za-z]:[\\/]* ) recprog=${progname} ;;
+ *) recprog=../${progname} ;;
# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
# and reset the trap handler.
# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
# and reset the trap handler.