-#if defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS))
-
-/* fixup_segment()
-
- Go through all the fixS's in a segment and see which ones can be
- handled now. (These consist of fixS where we have since discovered
- the value of a symbol, or the address of the frag involved.)
- For each one, call md_apply_fix3 to put the fix into the frag data.
-
- Result is a count of how many relocation structs will be needed to
- handle the remaining fixS's that we couldn't completely handle here.
- These will be output later by emit_relocations(). */
-
-static long
-fixup_segment (fixP, this_segment)
- fixS *fixP;
- segT this_segment;
-{
- long seg_reloc_count = 0;
- valueT add_number;
- fragS *fragP;
- segT add_symbol_segment = absolute_section;
-
- if (fixP != NULL && abs_section_sym == NULL)
- {
-#ifndef BFD_ASSEMBLER
- abs_section_sym = &abs_symbol;
-#else
- abs_section_sym = section_symbol (absolute_section);
-#endif
- }
-
- /* If the linker is doing the relaxing, we must not do any fixups.
-
- Well, strictly speaking that's not true -- we could do any that
- are PC-relative and don't cross regions that could change size.
- And for the i960 we might be able to turn callx/callj into bal
- anyways in cases where we know the maximum displacement. */
- if (linkrelax && TC_LINKRELAX_FIXUP (this_segment))
- {
- for (; fixP; fixP = fixP->fx_next)
- if (!fixP->fx_done)
- {
- if (fixP->fx_addsy == NULL)
- {
- /* There was no symbol required by this relocation.
- However, BFD doesn't really handle relocations
- without symbols well. So fake up a local symbol in
- the absolute section. */
- fixP->fx_addsy = abs_section_sym;
- }
- symbol_mark_used_in_reloc (fixP->fx_addsy);
- if (fixP->fx_subsy != NULL)
- symbol_mark_used_in_reloc (fixP->fx_subsy);
- seg_reloc_count++;
- }
- TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
- return seg_reloc_count;
- }
-
- for (; fixP; fixP = fixP->fx_next)
- {
-#ifdef DEBUG5
- fprintf (stderr, "\nprocessing fixup:\n");
- print_fixup (fixP);
-#endif
-
- fragP = fixP->fx_frag;
- know (fragP);
-#ifdef TC_VALIDATE_FIX
- TC_VALIDATE_FIX (fixP, this_segment, skip);
-#endif
- add_number = fixP->fx_offset;
-
- if (fixP->fx_addsy != NULL
- && symbol_mri_common_p (fixP->fx_addsy))
- {
- know (fixP->fx_addsy->sy_value.X_op == O_symbol);
- add_number += S_GET_VALUE (fixP->fx_addsy);
- fixP->fx_offset = add_number;
- fixP->fx_addsy
- = symbol_get_value_expression (fixP->fx_addsy)->X_add_symbol;
- }
-
- if (fixP->fx_addsy != NULL)
- add_symbol_segment = S_GET_SEGMENT (fixP->fx_addsy);
-
- if (fixP->fx_subsy != NULL)
- {
- segT sub_symbol_segment;
- resolve_symbol_value (fixP->fx_subsy);
- sub_symbol_segment = S_GET_SEGMENT (fixP->fx_subsy);
- if (fixP->fx_addsy != NULL
- && sub_symbol_segment == add_symbol_segment
- && !TC_FORCE_RELOCATION_SUB_SAME (fixP, add_symbol_segment))
- {
- add_number += S_GET_VALUE (fixP->fx_addsy);
- add_number -= S_GET_VALUE (fixP->fx_subsy);
- fixP->fx_offset = add_number;
- /* If the back-end code has selected a pc-relative
- reloc, adjust the value to be pc-relative. */
- if (1
-#ifdef TC_M68K
- /* See the comment below about 68k weirdness. */
- && 0
-#endif
- && fixP->fx_pcrel)
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
- fixP->fx_addsy = NULL;
- fixP->fx_subsy = NULL;
- fixP->fx_pcrel = 0;
- }
- else if (sub_symbol_segment == absolute_section
- && !TC_FORCE_RELOCATION_SUB_ABS (fixP))
- {
- add_number -= S_GET_VALUE (fixP->fx_subsy);
- fixP->fx_offset = add_number;
- fixP->fx_subsy = NULL;
- }
- else if (sub_symbol_segment == this_segment
- && !TC_FORCE_RELOCATION_SUB_LOCAL (fixP))
- {
- add_number -= S_GET_VALUE (fixP->fx_subsy);
- fixP->fx_offset = (add_number + fixP->fx_dot_value
- + fixP->fx_frag->fr_address);
-
- /* Make it pc-relative. If the back-end code has not
- selected a pc-relative reloc, cancel the adjustment
- we do later on all pc-relative relocs. */
- if (0
-#ifdef TC_M68K
- /* Do this for m68k even if it's already described
- as pc-relative. On the m68k, an operand of
- "pc@(foo-.-2)" should address "foo" in a
- pc-relative mode. */
- || 1
-#endif
- || !fixP->fx_pcrel)
- add_number += MD_PCREL_FROM_SECTION (fixP, this_segment);
- fixP->fx_subsy = NULL;
- fixP->fx_pcrel = 1;
- }
- else if (!TC_VALIDATE_FIX_SUB (fixP))
- {
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("can't resolve `%s' {%s section} - `%s' {%s section}"),
- fixP->fx_addsy ? S_GET_NAME (fixP->fx_addsy) : "0",
- segment_name (add_symbol_segment),
- S_GET_NAME (fixP->fx_subsy),
- segment_name (sub_symbol_segment));
- }
- }
-
- if (fixP->fx_addsy)
- {
- if (add_symbol_segment == this_segment
- && !TC_FORCE_RELOCATION_LOCAL (fixP))
- {
- /* This fixup was made when the symbol's segment was
- SEG_UNKNOWN, but it is now in the local segment.
- So we know how to do the address without relocation. */
- add_number += S_GET_VALUE (fixP->fx_addsy);
- fixP->fx_offset = add_number;
- if (fixP->fx_pcrel)
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
- fixP->fx_addsy = NULL;
- fixP->fx_pcrel = 0;
- }
- else if (add_symbol_segment == absolute_section
- && !TC_FORCE_RELOCATION_ABS (fixP))
- {
- add_number += S_GET_VALUE (fixP->fx_addsy);
- fixP->fx_offset = add_number;
- fixP->fx_addsy = NULL;
- }
- else if (add_symbol_segment != undefined_section
-#ifdef BFD_ASSEMBLER
- && ! bfd_is_com_section (add_symbol_segment)
-#endif
- && MD_APPLY_SYM_VALUE (fixP))
- add_number += S_GET_VALUE (fixP->fx_addsy);
- }
-
- if (fixP->fx_pcrel)
- {
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
- if (!fixP->fx_done && fixP->fx_addsy == NULL)
- {
- /* There was no symbol required by this relocation.
- However, BFD doesn't really handle relocations
- without symbols well. So fake up a local symbol in
- the absolute section. */
- fixP->fx_addsy = abs_section_sym;
- }
- }
-
- if (!fixP->fx_done)
- md_apply_fix3 (fixP, &add_number, this_segment);
-
- if (!fixP->fx_done)
- {
- ++seg_reloc_count;
- if (fixP->fx_addsy == NULL)
- fixP->fx_addsy = abs_section_sym;
- symbol_mark_used_in_reloc (fixP->fx_addsy);
- if (fixP->fx_subsy != NULL)
- symbol_mark_used_in_reloc (fixP->fx_subsy);
- }
-
- if (!fixP->fx_bit_fixP && !fixP->fx_no_overflow && fixP->fx_size != 0)
- {
- if (fixP->fx_size < sizeof (valueT))
- {
- valueT mask;
-
- mask = 0;
- mask--; /* Set all bits to one. */
- mask <<= fixP->fx_size * 8 - (fixP->fx_signed ? 1 : 0);
- if ((add_number & mask) != 0 && (add_number & mask) != mask)
- {
- char buf[50], buf2[50];
- sprint_value (buf, fragP->fr_address + fixP->fx_where);
- if (add_number > 1000)
- sprint_value (buf2, add_number);
- else
- sprintf (buf2, "%ld", (long) add_number);
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("value of %s too large for field of %d bytes at %s"),
- buf2, fixP->fx_size, buf);
- } /* Generic error checking. */
- }
-#ifdef WARN_SIGNED_OVERFLOW_WORD
- /* Warn if a .word value is too large when treated as a signed
- number. We already know it is not too negative. This is to
- catch over-large switches generated by gcc on the 68k. */
- if (!flag_signed_overflow_ok
- && fixP->fx_size == 2
- && add_number > 0x7fff)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("signed .word overflow; switch may be too large; %ld at 0x%lx"),
- (long) add_number,
- (long) (fragP->fr_address + fixP->fx_where));
-#endif
- } /* Not a bit fix. */
-
-#ifdef TC_VALIDATE_FIX
- skip: ATTRIBUTE_UNUSED_LABEL
- ;
-#endif
-#ifdef DEBUG5
- fprintf (stderr, "result:\n");
- print_fixup (fixP);
-#endif
- } /* For each fixS in this segment. */
-
- TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
- return seg_reloc_count;
-}
-
-#endif /* defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS)) */
-