+#endif
+
+#if GEN_GEN > 4 || GEN_IS_G4X
+ if (info->x_offset_sa != 0 || info->y_offset_sa != 0) {
+ /* There are fairly strict rules about when the offsets can be used.
+ * These are mostly taken from the Sky Lake PRM documentation for
+ * RENDER_SURFACE_STATE.
+ */
+ assert(info->surf->tiling != ISL_TILING_LINEAR);
+ assert(info->surf->dim == ISL_SURF_DIM_2D);
+ assert(isl_is_pow2(isl_format_get_layout(info->view->format)->bpb));
+ assert(info->surf->levels == 1);
+ assert(info->surf->logical_level0_px.array_len == 1);
+ assert(info->aux_usage == ISL_AUX_USAGE_NONE);
+
+ if (GEN_GEN >= 8) {
+ /* Broadwell added more rules. */
+ assert(info->surf->samples == 1);
+ if (isl_format_get_layout(info->view->format)->bpb == 8)
+ assert(info->x_offset_sa % 16 == 0);
+ if (isl_format_get_layout(info->view->format)->bpb == 16)
+ assert(info->x_offset_sa % 8 == 0);
+ }
+
+#if GEN_GEN >= 7
+ s.SurfaceArray = false;
+#endif
+ }
+
+ const unsigned x_div = 4;
+ const unsigned y_div = GEN_GEN >= 8 ? 4 : 2;
+ assert(info->x_offset_sa % x_div == 0);
+ assert(info->y_offset_sa % y_div == 0);
+ s.XOffset = info->x_offset_sa / x_div;
+ s.YOffset = info->y_offset_sa / y_div;
+#else
+ assert(info->x_offset_sa == 0);
+ assert(info->y_offset_sa == 0);
+#endif
+
+#if GEN_GEN >= 7
+ if (info->aux_usage != ISL_AUX_USAGE_NONE) {
+ /* Check valid aux usages per-gen */
+ if (GEN_GEN >= 12) {
+ assert(info->aux_usage == ISL_AUX_USAGE_MCS ||
+ info->aux_usage == ISL_AUX_USAGE_CCS_E ||
+ info->aux_usage == ISL_AUX_USAGE_GEN12_CCS_E ||
+ info->aux_usage == ISL_AUX_USAGE_HIZ_CCS_WT ||
+ info->aux_usage == ISL_AUX_USAGE_MCS_CCS ||
+ info->aux_usage == ISL_AUX_USAGE_STC_CCS);
+ } else if (GEN_GEN >= 9) {
+ assert(info->aux_usage == ISL_AUX_USAGE_HIZ ||
+ info->aux_usage == ISL_AUX_USAGE_MCS ||
+ info->aux_usage == ISL_AUX_USAGE_CCS_D ||
+ info->aux_usage == ISL_AUX_USAGE_CCS_E);
+ } else if (GEN_GEN >= 8) {
+ assert(info->aux_usage == ISL_AUX_USAGE_HIZ ||
+ info->aux_usage == ISL_AUX_USAGE_MCS ||
+ info->aux_usage == ISL_AUX_USAGE_CCS_D);
+ } else if (GEN_GEN >= 7) {
+ assert(info->aux_usage == ISL_AUX_USAGE_MCS ||
+ info->aux_usage == ISL_AUX_USAGE_CCS_D);
+ }
+
+ /* The docs don't appear to say anything whatsoever about compression
+ * and the data port. Testing seems to indicate that the data port
+ * completely ignores the AuxiliarySurfaceMode field.
+ *
+ * On gen12 HDC supports compression.
+ */
+ if (GEN_GEN < 12)
+ assert(!(info->view->usage & ISL_SURF_USAGE_STORAGE_BIT));
+
+ if (isl_surf_usage_is_depth(info->surf->usage))
+ assert(isl_aux_usage_has_hiz(info->aux_usage));
+
+ if (isl_surf_usage_is_stencil(info->surf->usage))
+ assert(info->aux_usage == ISL_AUX_USAGE_STC_CCS);
+
+ if (isl_aux_usage_has_hiz(info->aux_usage)) {
+ /* For Gen8-10, there are some restrictions around sampling from HiZ.
+ * The Skylake PRM docs for RENDER_SURFACE_STATE::AuxiliarySurfaceMode
+ * say:
+ *
+ * "If this field is set to AUX_HIZ, Number of Multisamples must
+ * be MULTISAMPLECOUNT_1, and Surface Type cannot be SURFTYPE_3D."
+ *
+ * On Gen12, the docs are a bit less obvious but the restriction is
+ * the same. The limitation isn't called out explicitly but the docs
+ * for the CCS_E value of RENDER_SURFACE_STATE::AuxiliarySurfaceMode
+ * say:
+ *
+ * "If Number of multisamples > 1, programming this value means
+ * MSAA compression is enabled for that surface. Auxillary surface
+ * is MSC with tile y."
+ *
+ * Since this interpretation ignores whether the surface is
+ * depth/stencil or not and since multisampled depth buffers use
+ * ISL_MSAA_LAYOUT_INTERLEAVED which is incompatible with MCS
+ * compression, this means that we can't even specify MSAA depth CCS
+ * in RENDER_SURFACE_STATE::AuxiliarySurfaceMode.
+ */
+ assert(info->surf->samples == 1);
+
+ /* The dimension must not be 3D */
+ assert(info->surf->dim != ISL_SURF_DIM_3D);
+
+ /* The format must be one of the following: */
+ switch (info->view->format) {
+ case ISL_FORMAT_R32_FLOAT:
+ case ISL_FORMAT_R24_UNORM_X8_TYPELESS:
+ case ISL_FORMAT_R16_UNORM:
+ break;
+ default:
+ assert(!"Incompatible HiZ Sampling format");
+ break;
+ }
+ }