#!/bin/bash
-BM=$CI_PROJECT_DIR/.gitlab-ci/bare-metal
-
-if [ -z "$BM_SERIAL" ]; then
- echo "Must set BM_SERIAL in your gitlab-runner config.toml [[runners]] environment"
- echo "This is the serial device to talk to for waiting for fastboot to be ready and logging from the kernel."
+BM=$CI_PROJECT_DIR/install/bare-metal
+
+if [ -z "$BM_SERIAL" -a -z "$BM_SERIAL_SCRIPT" ]; then
+ echo "Must set BM_SERIAL OR BM_SERIAL_SCRIPT in your gitlab-runner config.toml [[runners]] environment"
+ echo "BM_SERIAL:"
+ echo " This is the serial device to talk to for waiting for fastboot to be ready and logging from the kernel."
+ echo "BM_SERIAL_SCRIPT:"
+ echo " This is a shell script to talk to for waiting for fastboot to be ready and logging from the kernel."
exit 1
fi
exit 1
fi
+if [ -z "$BM_POWERDOWN" ]; then
+ echo "Must set BM_POWERDOWN in your gitlab-runner config.toml [[runners]] environment"
+ echo "This is a shell script that should power off the device."
+ exit 1
+fi
+
if [ -z "$BM_FASTBOOT_SERIAL" ]; then
echo "Must set BM_FASTBOOT_SERIAL in your gitlab-runner config.toml [[runners]] environment"
echo "This must be the a stable-across-resets fastboot serial number."
exit 1
fi
+if [ -z "$BM_WEBDAV_IP" -o -z "$BM_WEBDAV_PORT" ]; then
+ echo "BM_WEBDAV_IP and/or BM_WEBDAV_PORT is not set - no results will be uploaded from DUT!"
+ WEBDAV_CMDLINE=""
+else
+ WEBDAV_CMDLINE="webdav=http://$BM_WEBDAV_IP:$BM_WEBDAV_PORT"
+fi
+
set -ex
-# Copy the rootfs to a temporary for our setup, as I believe changes to the
-# container can end up impacting future runs.
-cp -Rp $BM_ROOTFS rootfs
-
-# Set up the init script that brings up the system.
-cp $BM/init.sh rootfs/init
-sed -i "s|DEQP_VER_REPLACE|$DEQP_VER|g" rootfs/init
-sed -i "s|DEQP_PARALLEL_REPLACE|$DEQP_PARALLEL|g" rootfs/init
-sed -i "s|CI_NODE_INDEX_REPLACE|$CI_NODE_INDEX|g" rootfs/init
-sed -i "s|CI_NODE_TOTAL_REPLACE|$CI_NODE_TOTAL|g" rootfs/init
-
-# Add the Mesa drivers we built, and make a consistent symlink to them.
-mkdir -p rootfs/$CI_PROJECT_DIR
-tar -C rootfs/$CI_PROJECT_DIR/ -xf $CI_PROJECT_DIR/artifacts/install.tar
-ln -sf $CI_PROJECT_DIR/install rootfs/install
-
-# Copy the deqp runner script and metadata.
-cp .gitlab-ci/deqp-runner.sh rootfs/deqp/.
-mkdir -p rootfs/artifacts/deqp
-cp .gitlab-ci/$DEQP_SKIPS rootfs/artifacts/deqp-skips.txt
-if [ -n "$DEQP_EXPECTED_FAILS" ]; then
- cp .gitlab-ci/$DEQP_EXPECTED_FAILS rootfs/artifacts/deqp-expected-fails.txt
-fi
+# Clear out any previous run's artifacts.
+rm -rf results/
+mkdir -p results
+find artifacts/ -name serial\*.txt | xargs rm -f
-# Finally, pack it up into a cpio rootfs.
+# Create the rootfs in a temp dir
+rsync -a --delete $BM_ROOTFS/ rootfs/
+. $BM/rootfs-setup.sh rootfs
+
+# Finally, pack it up into a cpio rootfs. Skip the vulkan CTS since none of
+# these devices use it and it would take up space in the initrd.
pushd rootfs
- find -H | cpio -H newc -o | xz --check=crc32 -T4 - > $CI_PROJECT_DIR/rootfs.cpio.gz
+find -H | \
+ egrep -v "external/(openglcts|vulkancts|amber|glslang|spirv-tools)" |
+ egrep -v "traces-db|apitrace|renderdoc|python" | \
+ cpio -H newc -o | \
+ xz --check=crc32 -T4 - > $CI_PROJECT_DIR/rootfs.cpio.gz
popd
cat $BM_KERNEL $BM_DTB > Image.gz-dtb
--create artifacts/fastboot.img \
-k Image.gz-dtb \
-r rootfs.cpio.gz \
- -c cmdline="$BM_CMDLINE"
+ -c cmdline="$BM_CMDLINE $WEBDAV_CMDLINE"
rm Image.gz-dtb
+# Start nginx to get results from DUT
+if [ -n "$WEBDAV_CMDLINE" ]; then
+ ln -s `pwd`/results /results
+ sed -i s/80/$BM_WEBDAV_PORT/g /etc/nginx/sites-enabled/default
+ sed -i s/www-data/root/g /etc/nginx/nginx.conf
+ nginx
+fi
+
# Start watching serial, and power up the device.
-$BM/serial-buffer.py $BM_SERIAL | tee artifacts/serial-output.txt &
+if [ -n "$BM_SERIAL" ]; then
+ python3 $BM/serial_buffer.py \
+ --dev $BM_SERIAL \
+ --file artifacts/serial-output.txt \
+ --prefix "SERIAL> " &
+else
+ PATH=$BM:$PATH $BM_SERIAL_SCRIPT | tee artifacts/serial-output.txt &
+fi
+
while [ ! -e artifacts/serial-output.txt ]; do
sleep 1
done
PATH=$BM:$PATH $BM_POWERUP
# Once fastboot is ready, boot our image.
-$BM/expect-output.sh artifacts/serial-output.txt "fastboot: processing commands"
+$BM/expect-output.sh artifacts/serial-output.txt \
+ -f "fastboot: processing commands" \
+ -f "Listening for fastboot command on" \
+ -e "data abort"
+
fastboot boot -s $BM_FASTBOOT_SERIAL artifacts/fastboot.img
# Wait for the device to complete the deqp run
-$BM/expect-output.sh artifacts/serial-output.txt "DEQP RESULT"
+$BM/expect-output.sh artifacts/serial-output.txt \
+ -f "bare-metal result" \
+ -e "---. end Kernel panic"
+
+# power down the device
+PATH=$BM:$PATH $BM_POWERDOWN
set +e
-if grep -q "DEQP RESULT: pass" artifacts/serial-output.txt; then
+if grep -q "bare-metal result: pass" artifacts/serial-output.txt; then
exit 0
else
exit 1
projects / mesa.git / blobdiff