- GLPROTO_VERSION=glproto-1.4.17
- DRI2PROTO_VERSION=dri2proto-2.8
- LIBPCIACCESS_VERSION=libpciaccess-0.13.4
- - LIBDRM_VERSION=libdrm-2.4.95
+ - LIBDRM_VERSION=libdrm-2.4.97
- XCBPROTO_VERSION=xcb-proto-1.13
- RANDRPROTO_VERSION=randrproto-1.3.0
- LIBXRANDR_VERSION=libXrandr-1.3.0
matrix:
include:
- - env:
- - LABEL="meson Vulkan"
- - BUILD=meson
- - DRI_DRIVERS=""
- - GALLIUM_DRIVERS=""
- - VULKAN_DRIVERS="intel,amd"
- - LLVM_VERSION=7
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- addons:
- apt:
- sources:
- - sourceline: 'deb http://apt.llvm.org/xenial/ llvm-toolchain-xenial-7 main'
- key_url: https://apt.llvm.org/llvm-snapshot.gpg.key
- packages:
- - llvm-7-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - python3.5
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="meson loaders/classic DRI"
- - BUILD=meson
- - DRI_DRIVERS="i915,i965,r100,r200,swrast,nouveau"
- - GALLIUM_DRIVERS=""
- - VULKAN_DRIVERS=""
- addons:
- apt:
- packages:
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libxxf86vm-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libxdamage-dev
- - libxfixes-dev
- - python3.5
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make loaders/classic DRI"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="make check"
- - DRI_LOADERS="--enable-glx --enable-gbm --enable-egl --with-platforms=x11,drm,surfaceless,wayland --enable-osmesa"
- - DRI_DRIVERS="i915,i965,radeon,r200,swrast,nouveau"
- - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS=""
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--disable-libunwind"
- addons:
- apt:
- packages:
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libxxf86vm-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libxdamage-dev
- - libxfixes-dev
- - python3-pip
- - python3-setuptools
- - env:
- # NOTE: Building SWR is 2x (yes two) times slower than all the other
- # gallium drivers combined.
- # Start this early so that it doesn't hunder the run time.
- - LABEL="make Gallium Drivers SWR"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=6.0
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="swr"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- packages:
- - llvm-6.0-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Gallium Drivers RadeonSI"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=7
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="radeonsi"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- sources:
- - sourceline: 'deb http://apt.llvm.org/xenial/ llvm-toolchain-xenial-7 main'
- key_url: https://apt.llvm.org/llvm-snapshot.gpg.key
- packages:
- # From sources above
- - llvm-7-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Gallium Drivers Other"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=3.9
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="i915,nouveau,pl111,r300,r600,freedreno,svga,swrast,v3d,vc4,virgl,etnaviv,imx"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- packages:
- # LLVM packaging is broken and misses these dependencies
- - libedit-dev
- - llvm-3.9-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Gallium ST Clover LLVM-3.9"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=3.9
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="r600"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- packages:
- - libclc-dev
- # LLVM packaging is broken and misses these dependencies
- - libedit-dev
- - llvm-3.9-dev
- - clang-3.9
- - libclang-3.9-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Gallium ST Clover LLVM-4.0"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=4.0
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="r600"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- packages:
- - libclc-dev
- # LLVM packaging is broken and misses these dependencies
- - libedit-dev
- - llvm-4.0-dev
- - clang-4.0
- - libclang-4.0-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Gallium ST Clover LLVM-5.0"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=5.0
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="r600"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- packages:
- - libclc-dev
- # LLVM packaging is broken and misses these dependencies
- - libedit-dev
- - llvm-5.0-dev
- - clang-5.0
- - libclang-5.0-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Gallium ST Clover LLVM-6.0"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=6.0
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="r600"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- packages:
- - libclc-dev
- - llvm-6.0-dev
- - clang-6.0
- - libclang-6.0-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Gallium ST Clover LLVM-7"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=7
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="r600,radeonsi"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- sources:
- - sourceline: 'deb http://apt.llvm.org/xenial/ llvm-toolchain-xenial-7 main'
- key_url: https://apt.llvm.org/llvm-snapshot.gpg.key
- packages:
- - libclc-dev
- # From sources above
- - llvm-7-dev
- - clang-7
- - libclang-7-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - env:
- - LABEL="make Gallium ST Other"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=3.5
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--enable-dri --disable-opencl --enable-xa --enable-nine --enable-xvmc --enable-vdpau --enable-va --enable-omx-bellagio --enable-gallium-osmesa"
- # We need swrast for osmesa and nine.
- # i915 most likely doesn't work with most ST.
- # Regardless - we're doing a quick build test here.
- - GALLIUM_DRIVERS="i915,swrast"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- packages:
- # We actually want to test against llvm-3.3, yet 3.5 is available
- - llvm-3.5-dev
- # Nine requires gcc 4.6... which is the one we have right ?
- - libxvmc-dev
- # Build locally, for now.
- #- libvdpau-dev
- #- libva-dev
- - libomxil-bellagio-dev
- # LLVM packaging is broken and misses these dependencies
- - libedit-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Vulkan"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="make -C src/gtest check && make -C src/intel check"
- - LLVM_VERSION=7
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl --with-platforms=x11,wayland"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--enable-dri --enable-dri3 --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS=""
- - VULKAN_DRIVERS="intel,radeon"
- - LIBUNWIND_FLAGS="--disable-libunwind"
- addons:
- apt:
- sources:
- - sourceline: 'deb http://apt.llvm.org/xenial/ llvm-toolchain-xenial-7 main'
- key_url: https://apt.llvm.org/llvm-snapshot.gpg.key
- packages:
- # From sources above
- - llvm-7-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="scons"
- - BUILD=scons
- - SCONSFLAGS="-j4"
- # Explicitly disable.
- - SCONS_TARGET="llvm=0"
- # Keep it symmetrical to the make build.
- - SCONS_CHECK_COMMAND="scons llvm=0 check"
- addons:
- apt:
- packages:
- # Common
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - env:
- - LABEL="scons LLVM"
- - BUILD=scons
- - SCONSFLAGS="-j4"
- - SCONS_TARGET="llvm=1"
- # Keep it symmetrical to the make build.
- - SCONS_CHECK_COMMAND="scons llvm=1 check"
- - LLVM_VERSION=3.5
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- addons:
- apt:
- packages:
- # LLVM packaging is broken and misses these dependencies
- - libedit-dev
- # We actually want to test against llvm-3.3, yet 3.5 is available
- - llvm-3.5-dev
- # Common
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - env:
- - LABEL="scons SWR"
- - BUILD=scons
- - SCONSFLAGS="-j4"
- - SCONS_TARGET="swr=1"
- - LLVM_VERSION=6.0
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- # Keep it symmetrical to the make build. There's no actual SWR, yet.
- - SCONS_CHECK_COMMAND="true"
- addons:
- apt:
- packages:
- - llvm-6.0-dev
- # Common
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - env:
- - LABEL="macOS make"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="make check"
- - DRI_LOADERS="--with-platforms=x11 --disable-egl"
- os: osx
- env:
- LABEL="macOS meson"
- BUILD=meson
+ - DRI_LOADERS="-Dplatforms=x11"
+ - GALLIUM_DRIVERS=swrast
os: osx
before_install:
pip3 install --user mako;
fi
- # Install autotools build dependencies
- - if test "x$BUILD" = xmake; then
- pip2 install --user mako;
- fi
-
- # Install a more modern scons from pip.
- - if test "x$BUILD" = xscons; then
- pip2 install --user "scons>=2.4";
- pip2 install --user mako;
- fi
-
# Install dependencies where we require specific versions (or where
# disallowed by Travis CI's package whitelisting).
fi
script:
- - if test "x$BUILD" = xmake; then
- export CFLAGS="$CFLAGS -isystem`pwd`";
-
- mkdir build &&
- cd build &&
- ../autogen.sh --enable-debug
- $LIBUNWIND_FLAGS
- $DRI_LOADERS
- --with-dri-drivers=$DRI_DRIVERS
- $GALLIUM_ST
- --with-gallium-drivers=$GALLIUM_DRIVERS
- --with-vulkan-drivers=$VULKAN_DRIVERS
- --disable-llvm-shared-libs
- &&
- make && eval $MAKE_CHECK_COMMAND;
- fi
-
- - if test "x$BUILD" = xscons; then
- scons $SCONS_TARGET && eval $SCONS_CHECK_COMMAND;
- fi
-
- - |
- if test "x$BUILD" = xmeson; then
-
- if test "x$TRAVIS_OS_NAME" == xosx; then
- MESON_OPTIONS="-Degl=false"
- fi
-
- if test "x$TRAVIS_OS_NAME" == xlinux; then
- MESON_OPTIONS="-Ddri-drivers=${DRI_DRIVERS:-[]} -Dgallium-drivers=${GALLIUM_DRIVERS:-[]} -Dvulkan-drivers=${VULKAN_DRIVERS:-[]}"
- fi
-
+ if test "x$BUILD" = xmeson; then
+ if test -n "$LLVM_CONFIG"; then
# We need to control the version of llvm-config we're using, so we'll
# generate a native file to do so. This requires meson >=0.49
#
echo -e "[binaries]\nllvm-config = '`which $LLVM_CONFIG`'" > native.file
$LLVM_CONFIG --version
-
- export CFLAGS="$CFLAGS -isystem`pwd`"
- meson _build $MESON_OPTIONS \
- --native-file=native.file \
- -Dbuild-tests=true
- meson configure _build
- ninja -C _build
- ninja -C _build test
+ else
+ : > native.file
fi
+
+ export CFLAGS="$CFLAGS -isystem`pwd`"
+ meson _build \
+ --native-file=native.file \
+ -Dbuild-tests=true \
+ ${DRI_LOADERS} \
+ -Ddri-drivers=${DRI_DRIVERS:-[]} \
+ -Dgallium-drivers=${GALLIUM_DRIVERS:-[]} \
+ -Dvulkan-drivers=${VULKAN_DRIVERS:-[]}
+ meson configure _build
+ ninja -C _build
+ ninja -C _build test
+ fi
projects / mesa.git / blobdiff