- GLPROTO_VERSION=glproto-1.4.17
- DRI2PROTO_VERSION=dri2proto-2.8
- LIBPCIACCESS_VERSION=libpciaccess-0.13.4
- - LIBDRM_VERSION=libdrm-2.4.74
+ - LIBDRM_VERSION=libdrm-2.4.97
- XCBPROTO_VERSION=xcb-proto-1.13
- RANDRPROTO_VERSION=randrproto-1.3.0
- LIBXRANDR_VERSION=libXrandr-1.3.0
matrix:
include:
- - env:
- - LABEL="meson Vulkan"
- - BUILD=meson
- - DRI_DRIVERS=""
- - GALLIUM_DRIVERS=""
- - VULKAN_DRIVERS="intel,amd"
- - LLVM_VERSION=7
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- addons:
- apt:
- sources:
- - sourceline: 'deb http://apt.llvm.org/xenial/ llvm-toolchain-xenial-7 main'
- key_url: https://apt.llvm.org/llvm-snapshot.gpg.key
- packages:
- - llvm-7-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - python3.5
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="meson loaders/classic DRI"
- - BUILD=meson
- - DRI_DRIVERS="i915,i965,r100,r200,swrast,nouveau"
- - GALLIUM_DRIVERS=""
- - VULKAN_DRIVERS=""
- addons:
- apt:
- packages:
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libxxf86vm-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libxdamage-dev
- - libxfixes-dev
- - python3.5
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make loaders/classic DRI"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="make check"
- - DRI_LOADERS="--enable-glx --enable-gbm --enable-egl --with-platforms=x11,drm,surfaceless,wayland --enable-osmesa"
- - DRI_DRIVERS="i915,i965,radeon,r200,swrast,nouveau"
- - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS=""
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--disable-libunwind"
- addons:
- apt:
- packages:
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libxxf86vm-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libxdamage-dev
- - libxfixes-dev
- - python3-pip
- - python3-setuptools
- - env:
- # NOTE: Building SWR is 2x (yes two) times slower than all the other
- # gallium drivers combined.
- # Start this early so that it doesn't hunder the run time.
- - LABEL="make Gallium Drivers SWR"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=6.0
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="swr"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- packages:
- - llvm-6.0-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="make Gallium Drivers RadeonSI"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="true"
- - LLVM_VERSION=7
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="radeonsi"
- - VULKAN_DRIVERS=""
- - LIBUNWIND_FLAGS="--enable-libunwind"
- addons:
- apt:
- sources:
- - sourceline: 'deb http://apt.llvm.org/xenial/ llvm-toolchain-xenial-7 main'
- key_url: https://apt.llvm.org/llvm-snapshot.gpg.key
- packages:
- # From sources above
- - llvm-7-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - libunwind8-dev
- - python3-pip
- - python3-setuptools
- env:
- LABEL="make Gallium Drivers Other"
- BUILD=make
- DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
- DRI_DRIVERS=""
- GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS="i915,nouveau,pl111,r300,r600,freedreno,svga,swrast,v3d,vc4,virgl,etnaviv,imx"
+ - GALLIUM_DRIVERS="i915,nouveau,kmsro,r300,r600,freedreno,svga,swrast,v3d,vc4,virgl,etnaviv"
- VULKAN_DRIVERS=""
- LIBUNWIND_FLAGS="--enable-libunwind"
addons:
- libunwind8-dev
- python3-pip
- python3-setuptools
- - env:
- - LABEL="make Vulkan"
- - BUILD=make
- - MAKEFLAGS="-j4"
- - MAKE_CHECK_COMMAND="make -C src/gtest check && make -C src/intel check"
- - LLVM_VERSION=7
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl --with-platforms=x11,wayland"
- - DRI_DRIVERS=""
- - GALLIUM_ST="--enable-dri --enable-dri3 --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
- - GALLIUM_DRIVERS=""
- - VULKAN_DRIVERS="intel,radeon"
- - LIBUNWIND_FLAGS="--disable-libunwind"
- addons:
- apt:
- sources:
- - sourceline: 'deb http://apt.llvm.org/xenial/ llvm-toolchain-xenial-7 main'
- key_url: https://apt.llvm.org/llvm-snapshot.gpg.key
- packages:
- # From sources above
- - llvm-7-dev
- # Common
- - xz-utils
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - python3-pip
- - python3-setuptools
- - env:
- - LABEL="scons"
- - BUILD=scons
- - SCONSFLAGS="-j4"
- # Explicitly disable.
- - SCONS_TARGET="llvm=0"
- # Keep it symmetrical to the make build.
- - SCONS_CHECK_COMMAND="scons llvm=0 check"
- addons:
- apt:
- packages:
- # Common
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - env:
- - LABEL="scons LLVM"
- - BUILD=scons
- - SCONSFLAGS="-j4"
- - SCONS_TARGET="llvm=1"
- # Keep it symmetrical to the make build.
- - SCONS_CHECK_COMMAND="scons llvm=1 check"
- - LLVM_VERSION=3.5
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- addons:
- apt:
- packages:
- # LLVM packaging is broken and misses these dependencies
- - libedit-dev
- # We actually want to test against llvm-3.3, yet 3.5 is available
- - llvm-3.5-dev
- # Common
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- - env:
- - LABEL="scons SWR"
- - BUILD=scons
- - SCONSFLAGS="-j4"
- - SCONS_TARGET="swr=1"
- - LLVM_VERSION=6.0
- - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
- # Keep it symmetrical to the make build. There's no actual SWR, yet.
- - SCONS_CHECK_COMMAND="true"
- addons:
- apt:
- packages:
- - llvm-6.0-dev
- # Common
- - xz-utils
- - x11proto-xf86vidmode-dev
- - libexpat1-dev
- - libx11-xcb-dev
- - libelf-dev
- env:
- LABEL="macOS make"
- BUILD=make
- env:
- LABEL="macOS meson"
- BUILD=meson
+ - UNWIND="false"
+ - DRI_LOADERS="-Dglx=dri -Dgbm=false -Degl=false -Dplatforms=x11 -Dosmesa=none"
+ - GALLIUM_ST="-Ddri3=true -Dgallium-vdpau=false -Dgallium-xvmc=false -Dgallium-omx=disabled -Dgallium-va=false -Dgallium-xa=false -Dgallium-nine=false -Dgallium-opencl=disabled"
os: osx
before_install:
pip2 install --user mako;
fi
- # Since libdrm gets updated in configure.ac regularly, try to pick up the
- # latest version from there.
- - for line in `grep "^LIBDRM.*_REQUIRED=" configure.ac`; do
- old_ver=`echo $LIBDRM_VERSION | sed 's/libdrm-//'`;
- new_ver=`echo $line | sed 's/.*REQUIRED=//'`;
- if `echo "$old_ver,$new_ver" | tr ',' '\n' | sort -Vc 2> /dev/null`; then
- export LIBDRM_VERSION="libdrm-$new_ver";
- fi;
- done
-
# Install dependencies where we require specific versions (or where
# disallowed by Travis CI's package whitelisting).
mkdir build &&
cd build &&
- ../autogen.sh --enable-debug
+ ../autogen.sh
+ --enable-autotools
+ --enable-debug
$LIBUNWIND_FLAGS
$DRI_LOADERS
--with-dri-drivers=$DRI_DRIVERS
- |
if test "x$BUILD" = xmeson; then
-
- if test "x$TRAVIS_OS_NAME" == xosx; then
- MESON_OPTIONS="-Degl=false"
- fi
-
- if test "x$TRAVIS_OS_NAME" == xlinux; then
- MESON_OPTIONS="-Ddri-drivers=${DRI_DRIVERS:-[]} -Dgallium-drivers=${GALLIUM_DRIVERS:-[]} -Dvulkan-drivers=${VULKAN_DRIVERS:-[]}"
+ if test -n "$LLVM_CONFIG"; then
+ # We need to control the version of llvm-config we're using, so we'll
+ # generate a native file to do so. This requires meson >=0.49
+ #
+ echo -e "[binaries]\nllvm-config = '`which $LLVM_CONFIG`'" > native.file
+
+ $LLVM_CONFIG --version
+ else
+ : > native.file
fi
- # Travis CI has moved to LLVM 5.0, and meson is detecting
- # automatically the available version in /usr/local/bin based on
- # the PATH env variable order preference.
- #
- # As for 0.44.x, Meson cannot receive the path to the
- # llvm-config binary as a configuration parameter. See
- # https://github.com/mesonbuild/meson/issues/2887 and
- # https://github.com/dcbaker/meson/commit/7c8b6ee3fa42f43c9ac7dcacc61a77eca3f1bcef
- #
- # We want to use the custom (APT) installed version. Therefore,
- # let's make Meson find our wanted version sooner than the one
- # at /usr/local/bin
- #
- # Once this is corrected, we would still need a patch similar
- # to:
- # https://lists.freedesktop.org/archives/mesa-dev/2017-December/180217.html
- test -f /usr/bin/$LLVM_CONFIG && ln -s /usr/bin/$LLVM_CONFIG $HOME/prefix/bin/llvm-config
-
export CFLAGS="$CFLAGS -isystem`pwd`"
- meson _build $MESON_OPTIONS
+ meson _build \
+ --native-file=native.file \
+ -Dbuild-tests=true \
+ -Dlibunwind=${UNWIND} \
+ ${DRI_LOADERS} \
+ -Ddri-drivers=${DRI_DRIVERS:-[]} \
+ ${GALLIUM_ST} \
+ -Dgallium-drivers=${GALLIUM_DRIVERS:-[]} \
+ -Dvulkan-drivers=${VULKAN_DRIVERS:-[]}
meson configure _build
ninja -C _build
+ ninja -C _build test
fi