-#####################
-## CMakeLists.txt
-## Top contributors (to current version):
-## Mathias Preiner, Aina Niemetz, Gereon Kremer
-## This file is part of the CVC4 project.
-## Copyright (c) 2009-2021 by the authors listed in the file AUTHORS
-## in the top-level source directory and their institutional affiliations.
-## All rights reserved. See the file COPYING in the top-level source
-## directory for licensing information.
+###############################################################################
+# Top contributors (to current version):
+# Aina Niemetz, Mathias Preiner, Gereon Kremer
+#
+# This file is part of the cvc5 project.
+#
+# Copyright (c) 2009-2021 by the authors listed in the file AUTHORS
+# in the top-level source directory and their institutional affiliations.
+# All rights reserved. See the file COPYING in the top-level source
+# directory for licensing information.
+# #############################################################################
+#
+# The build system configuration.
##
+
cmake_minimum_required(VERSION 3.9)
#-----------------------------------------------------------------------------#
# Project configuration
-project(cvc4)
+project(cvc5)
+include(CheckIPOSupported)
include(GNUInstallDirs)
+set(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake)
-set(CVC4_MAJOR 1) # Major component of the version of CVC4.
-set(CVC4_MINOR 9) # Minor component of the version of CVC4.
-set(CVC4_RELEASE 0) # Release component of the version of CVC4.
-
-# Extraversion component of the version of CVC4.
-set(CVC4_EXTRAVERSION "-prerelease")
-
-# Shared library versioning. Increment SOVERSION for every new CVC4 release.
-set(CVC4_SOVERSION 7)
-
-# Full release string for CVC4.
-if(CVC4_RELEASE)
- set(CVC4_RELEASE_STRING
- "${CVC4_MAJOR}.${CVC4_MINOR}.${CVC4_RELEASE}${CVC4_EXTRAVERSION}")
-else()
- set(CVC4_RELEASE_STRING "${CVC4_MAJOR}.${CVC4_MINOR}${CVC4_EXTRAVERSION}")
-endif()
+include(version)
-set(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake)
set(CMAKE_C_STANDARD 99)
set(CMAKE_CXX_STANDARD 17)
set(CMAKE_CXX_EXTENSIONS OFF)
#-----------------------------------------------------------------------------#
# Tell CMake where to find our dependencies
-if(ABC_DIR)
- list(APPEND CMAKE_PREFIX_PATH "${ABC_DIR}")
-endif()
-if(CADICAL_DIR)
- list(APPEND CMAKE_PREFIX_PATH "${CADICAL_DIR}")
-endif()
-if(CRYPTOMINISAT_DIR)
- list(APPEND CMAKE_PREFIX_PATH "${CRYPTOMINISAT_DIR}")
-endif()
if(GLPK_DIR)
list(APPEND CMAKE_PREFIX_PATH "${GLPK_DIR}")
endif()
-if(GMP_DIR)
- list(APPEND CMAKE_PREFIX_PATH "${GMP_DIR}")
-endif()
-if(KISSAT_DIR)
- list(APPEND CMAKE_PREFIX_PATH "${KISSAT_DIR}")
-endif()
-if(POLY_DIR)
- list(APPEND CMAKE_PREFIX_PATH "${POLY_DIR}")
-endif()
-if(SYMFPU_DIR)
- list(APPEND CMAKE_PREFIX_PATH "${SYMFPU_DIR}")
-endif()
# By default the contrib/get-* scripts install dependencies to deps/install.
list(APPEND CMAKE_PREFIX_PATH "${PROJECT_SOURCE_DIR}/deps/install")
# >> 3-valued: IGNORE ON OFF
# > allows to detect if set by user (default: IGNORE)
# > only necessary for options set for build types
-cvc4_option(ENABLE_ASAN "Enable ASAN build")
-cvc4_option(ENABLE_UBSAN "Enable UBSan build")
-cvc4_option(ENABLE_TSAN "Enable TSan build")
-cvc4_option(ENABLE_ASSERTIONS "Enable assertions")
-cvc4_option(ENABLE_COMP_INC_TRACK
+option(BUILD_SHARED_LIBS "Build shared libraries and binary")
+cvc5_option(ENABLE_ASAN "Enable ASAN build")
+cvc5_option(ENABLE_UBSAN "Enable UBSan build")
+cvc5_option(ENABLE_TSAN "Enable TSan build")
+cvc5_option(ENABLE_ASSERTIONS "Enable assertions")
+cvc5_option(ENABLE_COMP_INC_TRACK
"Enable optimizations for incremental SMT-COMP tracks")
-cvc4_option(ENABLE_DEBUG_SYMBOLS "Enable debug symbols")
-cvc4_option(ENABLE_DUMPING "Enable dumping")
-cvc4_option(ENABLE_MUZZLE "Suppress ALL non-result output")
-cvc4_option(ENABLE_STATISTICS "Enable statistics")
-cvc4_option(ENABLE_TRACING "Enable tracing")
-cvc4_option(ENABLE_UNIT_TESTING "Enable unit testing")
-cvc4_option(ENABLE_VALGRIND "Enable valgrind instrumentation")
-cvc4_option(ENABLE_SHARED "Build as shared library")
-cvc4_option(ENABLE_STATIC_BINARY
- "Build static binaries with statically linked system libraries")
+cvc5_option(ENABLE_DEBUG_SYMBOLS "Enable debug symbols")
+cvc5_option(ENABLE_DUMPING "Enable dumping")
+cvc5_option(ENABLE_MUZZLE "Suppress ALL non-result output")
+cvc5_option(ENABLE_STATISTICS "Enable statistics")
+cvc5_option(ENABLE_TRACING "Enable tracing")
+cvc5_option(ENABLE_UNIT_TESTING "Enable unit testing")
+cvc5_option(ENABLE_VALGRIND "Enable valgrind instrumentation")
+cvc5_option(ENABLE_AUTO_DOWNLOAD "Enable automatic download of dependencies")
+cvc5_option(ENABLE_IPO "Enable interprocedural optimization")
# >> 2-valued: ON OFF
# > for options where we don't need to detect if set by user (default: OFF)
option(ENABLE_BEST "Enable dependencies known to give best performance")
# >> 3-valued: IGNORE ON OFF
# > allows to detect if set by user (default: IGNORE)
# > only necessary for options set for ENABLE_BEST
-cvc4_option(USE_ABC "Use ABC for AIG bit-blasting")
-cvc4_option(USE_CADICAL "Use CaDiCaL SAT solver")
-cvc4_option(USE_CLN "Use CLN instead of GMP")
-cvc4_option(USE_CRYPTOMINISAT "Use CryptoMiniSat SAT solver")
-cvc4_option(USE_GLPK "Use GLPK simplex solver")
-cvc4_option(USE_KISSAT "Use Kissat SAT solver")
-cvc4_option(USE_EDITLINE "Use Editline for better interactive support")
+cvc5_option(USE_CLN "Use CLN instead of GMP")
+cvc5_option(USE_CRYPTOMINISAT "Use CryptoMiniSat SAT solver")
+cvc5_option(USE_GLPK "Use GLPK simplex solver")
+cvc5_option(USE_KISSAT "Use Kissat SAT solver")
+cvc5_option(USE_EDITLINE "Use Editline for better interactive support")
# >> 2-valued: ON OFF
# > for options where we don't need to detect if set by user (default: OFF)
option(USE_POLY "Use LibPoly for polynomial arithmetic")
-option(USE_SYMFPU "Use SymFPU for floating point support")
+option(USE_COCOA "Use CoCoALib for further polynomial operations")
option(USE_PYTHON2 "Force Python 2 (deprecated)")
# Custom install directories for dependencies
# installed via the corresponding contrib/get-* script and if not found, we
# check the intalled system version. If the user provides a directory we
# immediately fail if the dependency was not found at the specified location.
-set(ABC_DIR "" CACHE STRING "Set ABC install directory")
-set(CADICAL_DIR "" CACHE STRING "Set CaDiCaL install directory")
-set(CRYPTOMINISAT_DIR "" CACHE STRING "Set CryptoMiniSat install directory")
set(GLPK_DIR "" CACHE STRING "Set GLPK install directory")
-set(GMP_DIR "" CACHE STRING "Set GMP install directory")
-set(KISSAT_DIR "" CACHE STRING "Set Kissat install directory")
-set(POLY_DIR "" CACHE STRING "Set LibPoly install directory")
-set(SYMFPU_DIR "" CACHE STRING "Set SymFPU install directory")
# Prepend binaries with prefix on make install
set(PROGRAM_PREFIX "" CACHE STRING "Program prefix on make install")
-# Supprted language bindings based on new C++ API
+# Supported language bindings based on new C++ API
option(BUILD_BINDINGS_PYTHON "Build Python bindings based on new C++ API ")
option(BUILD_BINDINGS_JAVA "Build Java bindings based on new C++ API ")
-# Build limitations
-option(BUILD_LIB_ONLY "Only build the library")
+# Api documentation
+option(BUILD_DOCS "Build Api documentation")
#-----------------------------------------------------------------------------#
# Internal cmake variables
add_check_c_cxx_flag("-O${OPTIMIZATION_LEVEL}")
add_check_c_cxx_flag("-Wall")
-add_check_c_cxx_flag("-Wno-unused-private-field")
+add_check_c_cxx_supression_flag("-Wno-unused-private-field")
add_check_c_flag("-fexceptions")
add_check_cxx_flag("-Wsuggest-override")
add_check_cxx_flag("-Wnon-virtual-dtor")
add_check_c_cxx_flag("-Wimplicit-fallthrough")
add_check_c_cxx_flag("-Wshadow")
+# Assume no dynamic initialization of thread-local variables in non-defining
+# translation units. This option should result in better performance and works
+# around crashing issues with our Windows build.
+add_check_cxx_flag("-fno-extern-tls-init")
+
# Temporarily disable -Wclass-memaccess to suppress 'no trivial copy-assignment'
# cdlist.h warnings. Remove when fixed.
-add_check_cxx_flag("-Wno-class-memaccess")
+add_check_cxx_supression_flag("-Wno-class-memaccess")
if (WIN32)
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--stack,100000000")
endif ()
#-----------------------------------------------------------------------------#
-# Option defaults (three-valued options (cvc4_option(...)))
-#
-# These options are only set if their value is IGNORE. Otherwise, the user
-# already set the option, which we don't want to overwrite.
+# Use interprocedural optimization if requested
-if(ENABLE_STATIC_BINARY)
- cvc4_set_option(ENABLE_SHARED OFF)
-else()
- cvc4_set_option(ENABLE_SHARED ON)
+if(ENABLE_IPO)
+ set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
endif()
#-----------------------------------------------------------------------------#
# Only enable unit testing if assertions are enabled. Otherwise, unit tests
# that expect AssertionException to be thrown will fail.
if(NOT ENABLE_ASSERTIONS)
- message(WARNING "Disabling unit tests since assertions are disabled.")
+ message(STATUS "Disabling unit tests since assertions are disabled.")
set(ENABLE_UNIT_TESTING OFF)
endif()
#-----------------------------------------------------------------------------#
# Shared/static libraries
-#
-# This needs to be set before any find_package(...) command since we want to
-# search for static libraries with suffix .a.
-
-if(ENABLE_SHARED)
- set(BUILD_SHARED_LIBS ON)
- if(ENABLE_STATIC_BINARY)
- set(ENABLE_STATIC_BINARY OFF)
- message(WARNING "Disabling static binary since shared build is enabled.")
- endif()
- # Set visibility to default if unit tests are enabled
- if(ENABLE_UNIT_TESTING)
- set(CMAKE_CXX_VISIBILITY_PRESET default)
- set(CMAKE_VISIBILITY_INLINES_HIDDEN 0)
- endif()
-
- # Embed the installation prefix as an RPATH in the executable such that the
- # linker can find our libraries (such as libcvc4parser) when executing the
- # cvc4 binary. This is for example useful when installing CVC4 with a custom
- # prefix on macOS (e.g. when using homebrew in a non-standard directory). If
- # we do not set this option, then the linker will not be able to find the
- # required libraries when trying to run CVC4.
- #
- # Also embed the installation prefix of the installed contrib libraries as an
- # RPATH. This allows to install a dynamically linked binary that depends on
- # dynamically linked libraries. This is dangerous, as the installed binary
- # breaks if the contrib library is removed or changes in other ways, we thus
- # print a big warning and only allow if installing to a custom installation
- # prefix.
- #
- # More information on RPATH in CMake:
- # https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/RPATH-handling
- set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR};${PROJECT_SOURCE_DIR}/deps/install/lib")
-else()
- # When building statically, we *only* want static archives/libraries
- if (WIN32)
- set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a)
- else()
- set(CMAKE_FIND_LIBRARY_SUFFIXES .a)
- endif()
- set(BUILD_SHARED_LIBS OFF)
- cvc4_set_option(ENABLE_STATIC_BINARY ON)
-
- # Never build unit tests as static binaries, otherwise we'll end up with
- # ~300MB per unit test.
- if(ENABLE_UNIT_TESTING)
- message(WARNING "Disabling unit tests since static build is enabled.")
- set(ENABLE_UNIT_TESTING OFF)
- endif()
+# Embed the installation prefix as an RPATH in the executable such that the
+# linker can find our libraries (such as libcvc5parser) when executing the
+# cvc5 binary. This is for example useful when installing cvc5 with a custom
+# prefix on macOS (e.g. when using homebrew in a non-standard directory). If
+# we do not set this option, then the linker will not be able to find the
+# required libraries when trying to run cvc5.
+#
+# Also embed the installation prefix of the installed contrib libraries as an
+# RPATH. This allows to install a dynamically linked binary that depends on
+# dynamically linked libraries. This is dangerous, as the installed binary
+# breaks if the contrib library is removed or changes in other ways, we thus
+# print a big warning and only allow if installing to a custom installation
+# prefix.
+#
+# More information on RPATH in CMake:
+# https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/RPATH-handling
+set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR};${PROJECT_SOURCE_DIR}/deps/install/lib")
- if (BUILD_BINDINGS_PYTHON)
- message(FATAL_ERROR "Building Python bindings is not possible "
- "when building statically")
- endif()
+# Set visibility to default if unit tests are enabled
+if(ENABLE_UNIT_TESTING)
+ set(CMAKE_CXX_VISIBILITY_PRESET default)
+ set(CMAKE_VISIBILITY_INLINES_HIDDEN 0)
endif()
#-----------------------------------------------------------------------------#
#-----------------------------------------------------------------------------#
# Check options, find packages and configure build.
+if(BUILD_SHARED_LIBS)
+ if (WIN32)
+ set(CMAKE_FIND_LIBRARY_SUFFIXES .dll .lib .a)
+ else()
+ set(CMAKE_FIND_LIBRARY_SUFFIXES .so .dylib .a)
+ endif()
+else()
+ if (WIN32)
+ set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a .dll)
+ else()
+ set(CMAKE_FIND_LIBRARY_SUFFIXES .a .so .dylib)
+ endif()
+endif()
+
if(USE_PYTHON2)
find_package(PythonInterp 2.7 REQUIRED)
else()
find_package(PythonInterp 3 REQUIRED)
endif()
-find_package(GMP REQUIRED)
+find_package(GMP 6.1 REQUIRED)
if(ENABLE_ASAN)
# -fsanitize=address requires CMAKE_REQUIRED_FLAGS to be explicitely set,
if(ENABLE_UBSAN)
add_required_c_cxx_flag("-fsanitize=undefined")
- add_definitions(-DCVC4_USE_UBSAN)
+ add_definitions(-DCVC5_USE_UBSAN)
endif()
if(ENABLE_TSAN)
endif()
if(ENABLE_ASSERTIONS)
- add_definitions(-DCVC4_ASSERTIONS)
+ add_definitions(-DCVC5_ASSERTIONS)
else()
add_definitions(-DNDEBUG)
endif()
if(ENABLE_COVERAGE)
include(CodeCoverage)
APPEND_COVERAGE_COMPILER_FLAGS()
- add_definitions(-DCVC4_COVERAGE)
+ add_definitions(-DCVC5_COVERAGE)
# Note: The ctest command returns a non-zero exit code if tests fail or run
# into a timeout. As a consequence, the coverage report is not generated. To
# prevent this we always return with exit code 0 after the ctest command has
# finished.
setup_target_for_coverage_gcovr_html(
- NAME coverage
+ NAME coverage-test
EXECUTABLE
ctest -j${CTEST_NTHREADS} -LE "example"
--output-on-failure $$ARGS || exit 0
DEPENDS
build-tests)
+
+ # Adds targets `coverage` and `coverage-reset` for manually generating
+ # coverage reports for specific executions.
+ #
+ # Target coverage-reset resets all the coverage counters to zero, while
+ # target coverage will generate a coverage report for all executions since
+ # the last coverage-reset.
+ setup_target_for_coverage_lcov_no_executable(
+ NAME coverage
+ DEPENDENCIES cvc5-bin)
endif()
if(ENABLE_DEBUG_CONTEXT_MM)
- add_definitions(-DCVC4_DEBUG_CONTEXT_MEMORY_MANAGER)
+ add_definitions(-DCVC5_DEBUG_CONTEXT_MEMORY_MANAGER)
endif()
if(ENABLE_DEBUG_SYMBOLS)
endif()
if(ENABLE_COMP_INC_TRACK)
- add_definitions(-DCVC4_SMTCOMP_APPLICATION_TRACK)
+ add_definitions(-DCVC5_SMTCOMP_APPLICATION_TRACK)
endif()
if(ENABLE_MUZZLE)
- add_definitions(-DCVC4_MUZZLE)
+ add_definitions(-DCVC5_MUZZLE)
endif()
if(ENABLE_DUMPING)
- add_definitions(-DCVC4_DUMPING)
+ add_definitions(-DCVC5_DUMPING)
endif()
if(ENABLE_PROFILING)
- add_definitions(-DCVC4_PROFILING)
+ add_definitions(-DCVC5_PROFILING)
add_check_c_cxx_flag("-pg")
endif()
if(ENABLE_TRACING)
- add_definitions(-DCVC4_TRACING)
+ add_definitions(-DCVC5_TRACING)
endif()
if(ENABLE_STATISTICS)
- add_definitions(-DCVC4_STATISTICS_ON)
+ add_definitions(-DCVC5_STATISTICS_ON)
endif()
if(ENABLE_VALGRIND)
find_package(Valgrind REQUIRED)
- add_definitions(-DCVC4_VALGRIND)
+ add_definitions(-DCVC5_VALGRIND)
endif()
-if(USE_ABC)
- find_package(ABC REQUIRED)
- add_definitions(-DCVC4_USE_ABC ${ABC_ARCH_FLAGS})
-endif()
-
-if(USE_CADICAL)
- find_package(CaDiCaL REQUIRED)
- add_definitions(-DCVC4_USE_CADICAL)
-endif()
+find_package(CaDiCaL REQUIRED)
if(USE_CLN)
set(GPL_LIBS "${GPL_LIBS} cln")
find_package(CLN 1.2.2 REQUIRED)
- set(CVC4_USE_CLN_IMP 1)
- set(CVC4_USE_GMP_IMP 0)
+ set(CVC5_USE_CLN_IMP 1)
+ set(CVC5_USE_GMP_IMP 0)
else()
- set(CVC4_USE_CLN_IMP 0)
- set(CVC4_USE_GMP_IMP 1)
+ set(CVC5_USE_CLN_IMP 0)
+ set(CVC5_USE_GMP_IMP 1)
endif()
if(USE_CRYPTOMINISAT)
if(THREADS_HAVE_PTHREAD_ARG)
add_c_cxx_flag(-pthread)
endif()
- find_package(CryptoMiniSat REQUIRED)
- add_definitions(-DCVC4_USE_CRYPTOMINISAT)
+ find_package(CryptoMiniSat 5.8 REQUIRED)
+ add_definitions(-DCVC5_USE_CRYPTOMINISAT)
endif()
if(USE_GLPK)
set(GPL_LIBS "${GPL_LIBS} glpk")
find_package(GLPK REQUIRED)
- add_definitions(-DCVC4_USE_GLPK)
+ add_definitions(-DCVC5_USE_GLPK)
endif()
if(USE_KISSAT)
find_package(Kissat REQUIRED)
- add_definitions(-DCVC4_USE_KISSAT)
+ add_definitions(-DCVC5_USE_KISSAT)
endif()
if(USE_POLY)
find_package(Poly REQUIRED)
- add_definitions(-DCVC4_USE_POLY)
- set(CVC4_USE_POLY_IMP 1)
+ add_definitions(-DCVC5_USE_POLY)
+ set(CVC5_USE_POLY_IMP 1)
else()
- set(CVC4_USE_POLY_IMP 0)
+ set(CVC5_USE_POLY_IMP 0)
+endif()
+
+if(USE_COCOA)
+ find_package(CoCoA REQUIRED 0.99711)
+ add_definitions(-DCVC5_USE_COCOA)
endif()
if(USE_EDITLINE)
endif()
endif()
-if(USE_SYMFPU)
- find_package(SymFPU REQUIRED)
- add_definitions(-DCVC4_USE_SYMFPU)
- set(CVC4_USE_SYMFPU 1)
-else()
- set(CVC4_USE_SYMFPU 0)
-endif()
+find_package(SymFPU REQUIRED)
if(GPL_LIBS)
if(NOT ENABLE_GPL)
"Bad configuration detected: BSD-licensed code only, but also requested "
"GPLed libraries: ${GPL_LIBS}")
endif()
- set(CVC4_GPL_DEPS 1)
+ set(CVC5_GPL_DEPS 1)
endif()
#-----------------------------------------------------------------------------#
# Provide targets to inspect iwyu suggestions
include(IWYU)
+include(fuzzing-murxla)
#-----------------------------------------------------------------------------#
-# Generate CVC4's cvc4autoconfig.h header
-include(ConfigureCVC4)
-if(NOT ENABLE_SHARED)
- set(CVC4_STATIC_BUILD ON)
+include(ConfigureCvc5)
+if(BUILD_SHARED_LIBS)
+ set(CVC5_STATIC_BUILD OFF)
+else()
+ set(CVC5_STATIC_BUILD ON)
endif()
-configure_file(cvc4autoconfig.h.in cvc4autoconfig.h)
-unset(CVC4_STATIC_BUILD)
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
#-----------------------------------------------------------------------------#
# Add subdirectories
-add_subdirectory(doc)
add_subdirectory(src)
-add_subdirectory(test)
+if(BUILD_BINDINGS_PYTHON AND NOT BUILD_SHARED_LIBS)
+ message(STATUS "Python bindings can only be built in a shared build.")
+ set(BUILD_BINDINGS_PYTHON OFF)
+endif()
if(BUILD_BINDINGS_PYTHON)
set(BUILD_BINDINGS_PYTHON_VERSION ${PYTHON_VERSION_MAJOR})
add_subdirectory(src/api/python)
message(WARNING "Java API is currently under development.")
endif()
+if(BUILD_DOCS)
+ add_subdirectory(docs)
+endif()
+
+add_subdirectory(test)
+
+include(target-graphs)
+
#-----------------------------------------------------------------------------#
# Package configuration
#
-# Export CVC4 targets to support find_package(CVC4) in other cmake projects.
+# Export cvc5 targets to support find_package(cvc5) in other cmake projects.
include(CMakePackageConfigHelpers)
# (in the assumption that only reasonably experienced users use this and
# also that custom installation prefixes are not used for longer periods of
# time anyway). Also, we print a big warning with further instructions.
-if(NOT ENABLE_STATIC_BINARY)
- # Get the libraries that cvc4 links against
- get_target_property(libs cvc4 INTERFACE_LINK_LIBRARIES)
+if(BUILD_SHARED_LIBS)
+ # Get the libraries that cvc5 links against
+ get_target_property(libs cvc5 INTERFACE_LINK_LIBRARIES)
set(LIBS_SHARED_FROM_DEPS "")
foreach(lib ${libs})
# Filter out those that are linked dynamically and come from deps/install
if(list_len GREATER 0)
# Print a generic warning
install(CODE "message(WARNING \"You are installing a dynamically linked \
- binary of CVC4 which may be a problem if you are using any dynamically \
+ binary of cvc5 which may be a problem if you are using any dynamically \
linked third-party library that you obtained through one of the \
contrib/get-xxx scripts. The binary uses the rpath mechanism to find these \
locally, hence executing such a contrib script removing the \
\\\"deps/install\\\" folder most probably breaks the installed binary! \
Consider installing the dynamically linked dependencies on your system \
- manually or link cvc4 statically.\")")
+ manually or link cvc5 statically.\")")
# Print the libraries in question
foreach(lib ${LIBS_SHARED_FROM_DEPS})
- install(CODE "message(WARNING \"The following library is used by the cvc4 binary: ${lib}\")")
+ install(CODE "message(WARNING \"The following library is used by the cvc5 binary: ${lib}\")")
endforeach()
# Check if we use a custom installation prefix
if(CMAKE_INSTALL_PREFIX STREQUAL "/usr/local")
endif()
endif()
-install(EXPORT cvc4-targets
- FILE CVC4Targets.cmake
- NAMESPACE CVC4::
- DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/CVC4)
+install(EXPORT cvc5-targets
+ FILE cvc5Targets.cmake
+ NAMESPACE cvc5::
+ DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/cvc5)
configure_package_config_file(
- ${CMAKE_SOURCE_DIR}/cmake/CVC4Config.cmake.in
- ${CMAKE_BINARY_DIR}/cmake/CVC4Config.cmake
- INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/CVC4
+ ${CMAKE_SOURCE_DIR}/cmake/cvc5Config.cmake.in
+ ${CMAKE_BINARY_DIR}/cmake/cvc5Config.cmake
+ INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/cvc5
PATH_VARS CMAKE_INSTALL_LIBDIR
)
write_basic_package_version_file(
- ${CMAKE_CURRENT_BINARY_DIR}/CVC4ConfigVersion.cmake
- VERSION ${CVC4_RELEASE_STRING}
+ ${CMAKE_CURRENT_BINARY_DIR}/cvc5ConfigVersion.cmake
+ VERSION ${CVC5_VERSION}
COMPATIBILITY ExactVersion
)
install(FILES
- ${CMAKE_BINARY_DIR}/cmake/CVC4Config.cmake
- ${CMAKE_BINARY_DIR}/CVC4ConfigVersion.cmake
- DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/CVC4
+ ${CMAKE_BINARY_DIR}/cmake/cvc5Config.cmake
+ ${CMAKE_BINARY_DIR}/cvc5ConfigVersion.cmake
+ DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/cvc5
)
endif()
# Convert build type to lower case.
-string(TOLOWER ${CMAKE_BUILD_TYPE} CVC4_BUILD_PROFILE_STRING)
+string(TOLOWER ${CMAKE_BUILD_TYPE} CVC5_BUILD_PROFILE_STRING)
# Get all definitions added via add_definitions.
-get_directory_property(CVC4_DEFINITIONS COMPILE_DEFINITIONS)
-string(REPLACE ";" " " CVC4_DEFINITIONS "${CVC4_DEFINITIONS}")
+get_directory_property(CVC5_DEFINITIONS COMPILE_DEFINITIONS)
+string(REPLACE ";" " " CVC5_DEFINITIONS "${CVC5_DEFINITIONS}")
message("")
-print_info("CVC4 ${CVC4_RELEASE_STRING}")
+print_info("cvc5 ${CVC5_VERSION}")
message("")
if(ENABLE_COMP_INC_TRACK)
- print_config("Build profile " "${CVC4_BUILD_PROFILE_STRING} (incremental)")
+ print_config("Build profile " "${CVC5_BUILD_PROFILE_STRING} (incremental)")
else()
- print_config("Build profile " "${CVC4_BUILD_PROFILE_STRING}")
+ print_config("Build profile " "${CVC5_BUILD_PROFILE_STRING}")
endif()
message("")
print_config("GPL " ${ENABLE_GPL})
print_config("Unit tests " ${ENABLE_UNIT_TESTING})
print_config("Valgrind " ${ENABLE_VALGRIND})
message("")
-print_config("Shared libs " ${ENABLE_SHARED})
-print_config("Static binary " ${ENABLE_STATIC_BINARY})
+print_config("Shared build " ${BUILD_SHARED_LIBS})
print_config("Python bindings " ${BUILD_BINDINGS_PYTHON})
print_config("Java bindings " ${BUILD_BINDINGS_JAVA})
print_config("Python2 " ${USE_PYTHON2})
+print_config("Interprocedural opt. " ${ENABLE_IPO})
message("")
-print_config("ABC " ${USE_ABC})
-print_config("CaDiCaL " ${USE_CADICAL})
-print_config("CryptoMiniSat " ${USE_CRYPTOMINISAT})
+print_config("CryptoMiniSat " ${USE_CRYPTOMINISAT} FOUND_SYSTEM ${CryptoMiniSat_FOUND_SYSTEM})
print_config("GLPK " ${USE_GLPK})
-print_config("Kissat " ${USE_KISSAT})
-print_config("LibPoly " ${USE_POLY})
-message("")
-print_config("Build libcvc4 only " ${BUILD_LIB_ONLY})
+print_config("Kissat " ${USE_KISSAT} FOUND_SYSTEM ${Kissat_FOUND_SYSTEM})
+print_config("LibPoly " ${USE_POLY} FOUND_SYSTEM ${Poly_FOUND_SYSTEM})
+print_config("CoCoALib " ${USE_COCOA} FOUND_SYSTEM ${CoCoA_FOUND_SYSTEM})
-if(CVC4_USE_CLN_IMP)
- print_config("MP library " "cln")
+if(CVC5_USE_CLN_IMP)
+ print_config("MP library " "cln" FOUND_SYSTEM ${CLN_FOUND_SYSTEM})
else()
- print_config("MP library " "gmp")
+ print_config("MP library " "gmp" FOUND_SYSTEM ${GMP_FOUND_SYSTEM})
endif()
print_config("Editline " ${USE_EDITLINE})
-print_config("SymFPU " ${USE_SYMFPU})
message("")
-if(ABC_DIR)
- print_config("ABC dir " ${ABC_DIR})
-endif()
-if(CADICAL_DIR)
- print_config("CADICAL dir " ${CADICAL_DIR})
-endif()
-if(CRYPTOMINISAT_DIR)
- print_config("CRYPTOMINISAT dir " ${CRYPTOMINISAT_DIR})
-endif()
+print_config("Api docs " ${BUILD_DOCS})
+message("")
if(GLPK_DIR)
print_config("GLPK dir " ${GLPK_DIR})
endif()
-if(GMP_DIR)
- print_config("GMP dir " ${GMP_DIR})
-endif()
-if(KISSAT_DIR)
- print_config("KISSAT dir " ${KISSAT_DIR})
-endif()
-if(POLY_DIR)
- print_config("LibPoly dir " ${POLY_DIR})
-endif()
-if(SYMFPU_DIR)
- print_config("SYMFPU dir " ${SYMFPU_DIR})
-endif()
-print_config("asdf" "")
message("")
-print_config("CPPLAGS (-D...)" "${CVC4_DEFINITIONS}")
+print_config("CPPLAGS (-D...)" "${CVC5_DEFINITIONS}")
print_config("CXXFLAGS " "${CMAKE_CXX_FLAGS}")
print_config("CFLAGS " "${CMAKE_C_FLAGS}")
print_config("Linker flags " "${CMAKE_EXE_LINKER_FLAGS}")
if(GPL_LIBS)
message(
- "${Blue}CVC4 license: "
+ "${Blue}cvc5 license: "
"${Yellow}GPLv3 (due to optional libraries; see below)${ResetColor}"
"\n"
"\n"
- "Please note that CVC4 will be built against the following GPLed libraries:"
+ "Please note that cvc5 will be built against the following GPLed libraries:"
"\n"
"${GPL_LIBS}"
"\n"
- "As these libraries are covered under the GPLv3, so is this build of CVC4."
+ "As these libraries are covered under the GPLv3, so is this build of cvc5."
"\n"
- "CVC4 is also available to you under the terms of the (modified) BSD license."
+ "cvc5 is also available to you under the terms of the (modified) BSD license."
"\n"
- "If you prefer to license CVC4 under those terms, please configure CVC4 to"
+ "If you prefer to license cvc5 under those terms, please configure cvc5 to"
"\n"
"disable all optional GPLed library dependencies (-DENABLE_BSD_ONLY=ON)."
)
else()
message(
- "${Blue}CVC4 license:${ResetColor} modified BSD"
+ "${Blue}cvc5 license:${ResetColor} modified BSD"
"\n"
"\n"
"Note that this configuration is NOT built against any GPL'ed libraries, so"
"\n"
- "it is covered by the (modified) BSD license. This is, however, not the best"
+ "it is covered by the (modified) BSD license. To build against GPL'ed"
"\n"
- "performing configuration of CVC4. To build against GPL'ed libraries which"
+ "libraries which can improve cvc5's performance on arithmetic and bitvector"
"\n"
- "improve CVC4's performance, re-configure with '-DENABLE_GPL -DENABLE_BEST'."
+ "logics, re-configure with '-DENABLE_GPL -DENABLE_BEST'."
)
endif()