project(cvc5)
+include(CheckIPOSupported)
include(GNUInstallDirs)
+set(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake)
-set(CVC5_MAJOR 1) # Major component of the version of cvc5.
-set(CVC5_MINOR 0) # Minor component of the version of cvc5.
-set(CVC5_RELEASE 0) # Release component of the version of cvc5.
-
-# Extraversion component of the version of cvc5.
-set(CVC5_EXTRAVERSION "-prerelease")
-
-# Shared library versioning. Increment SOVERSION for every new cvc5 release.
-set(CVC5_SOVERSION 1)
+include(version)
-# Full release string for cvc5.
-if(CVC5_RELEASE)
- set(CVC5_RELEASE_STRING
- "${CVC5_MAJOR}.${CVC5_MINOR}.${CVC5_RELEASE}${CVC5_EXTRAVERSION}")
-else()
- set(CVC5_RELEASE_STRING "${CVC5_MAJOR}.${CVC5_MINOR}${CVC5_EXTRAVERSION}")
-endif()
-
-set(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake)
set(CMAKE_C_STANDARD 99)
set(CMAKE_CXX_STANDARD 17)
set(CMAKE_CXX_EXTENSIONS OFF)
#-----------------------------------------------------------------------------#
# Tell CMake where to find our dependencies
-if(ABC_DIR)
- list(APPEND CMAKE_PREFIX_PATH "${ABC_DIR}")
-endif()
if(GLPK_DIR)
list(APPEND CMAKE_PREFIX_PATH "${GLPK_DIR}")
endif()
cvc5_option(ENABLE_TRACING "Enable tracing")
cvc5_option(ENABLE_UNIT_TESTING "Enable unit testing")
cvc5_option(ENABLE_VALGRIND "Enable valgrind instrumentation")
-cvc5_option(ENABLE_SHARED "Build as shared library")
-cvc5_option(ENABLE_STATIC_BINARY
- "Build static binaries with statically linked system libraries")
+cvc5_option(ENABLE_STATIC_BUILD "Enable building static libraries and binary")
cvc5_option(ENABLE_AUTO_DOWNLOAD "Enable automatic download of dependencies")
+cvc5_option(ENABLE_IPO "Enable interprocedural optimization")
# >> 2-valued: ON OFF
# > for options where we don't need to detect if set by user (default: OFF)
option(ENABLE_BEST "Enable dependencies known to give best performance")
# >> 3-valued: IGNORE ON OFF
# > allows to detect if set by user (default: IGNORE)
# > only necessary for options set for ENABLE_BEST
-cvc5_option(USE_ABC "Use ABC for AIG bit-blasting")
-cvc5_option(USE_CADICAL "Use CaDiCaL SAT solver")
cvc5_option(USE_CLN "Use CLN instead of GMP")
cvc5_option(USE_CRYPTOMINISAT "Use CryptoMiniSat SAT solver")
cvc5_option(USE_GLPK "Use GLPK simplex solver")
# installed via the corresponding contrib/get-* script and if not found, we
# check the intalled system version. If the user provides a directory we
# immediately fail if the dependency was not found at the specified location.
-set(ABC_DIR "" CACHE STRING "Set ABC install directory")
set(GLPK_DIR "" CACHE STRING "Set GLPK install directory")
# Prepend binaries with prefix on make install
option(BUILD_BINDINGS_PYTHON "Build Python bindings based on new C++ API ")
option(BUILD_BINDINGS_JAVA "Build Java bindings based on new C++ API ")
-# Build limitations
-option(BUILD_LIB_ONLY "Only build the library")
-
# Api documentation
-cvc5_option(BUILD_DOCS "Build Api documentation")
+option(BUILD_DOCS "Build Api documentation")
#-----------------------------------------------------------------------------#
# Internal cmake variables
add_check_c_cxx_flag("-O${OPTIMIZATION_LEVEL}")
add_check_c_cxx_flag("-Wall")
-add_check_c_cxx_flag("-Wno-unused-private-field")
+add_check_c_cxx_supression_flag("-Wno-unused-private-field")
add_check_c_flag("-fexceptions")
add_check_cxx_flag("-Wsuggest-override")
add_check_cxx_flag("-Wnon-virtual-dtor")
add_check_c_cxx_flag("-Wimplicit-fallthrough")
add_check_c_cxx_flag("-Wshadow")
+# Assume no dynamic initialization of thread-local variables in non-defining
+# translation units. This option should result in better performance and works
+# around crashing issues with our Windows build.
+add_check_cxx_flag("-fno-extern-tls-init")
+
# Temporarily disable -Wclass-memaccess to suppress 'no trivial copy-assignment'
# cdlist.h warnings. Remove when fixed.
-add_check_cxx_flag("-Wno-class-memaccess")
+add_check_cxx_supression_flag("-Wno-class-memaccess")
if (WIN32)
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--stack,100000000")
endif ()
#-----------------------------------------------------------------------------#
-# Option defaults (three-valued options (cvc5_option(...)))
-#
-# These options are only set if their value is IGNORE. Otherwise, the user
-# already set the option, which we don't want to overwrite.
+# Use interprocedural optimization if requested
-if(ENABLE_STATIC_BINARY)
- cvc5_set_option(ENABLE_SHARED OFF)
-else()
- cvc5_set_option(ENABLE_SHARED ON)
+if(ENABLE_IPO)
+ set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
endif()
#-----------------------------------------------------------------------------#
#-----------------------------------------------------------------------------#
# Shared/static libraries
-#
-# This needs to be set before any find_package(...) command since we want to
-# search for static libraries with suffix .a.
-
-if(ENABLE_SHARED)
- set(BUILD_SHARED_LIBS ON)
- if(ENABLE_STATIC_BINARY)
- set(ENABLE_STATIC_BINARY OFF)
- message(STATUS "Disabling static binary since shared build is enabled.")
- endif()
-
- # Set visibility to default if unit tests are enabled
- if(ENABLE_UNIT_TESTING)
- set(CMAKE_CXX_VISIBILITY_PRESET default)
- set(CMAKE_VISIBILITY_INLINES_HIDDEN 0)
- endif()
- # Embed the installation prefix as an RPATH in the executable such that the
- # linker can find our libraries (such as libcvc5parser) when executing the
- # cvc5 binary. This is for example useful when installing cvc5 with a custom
- # prefix on macOS (e.g. when using homebrew in a non-standard directory). If
- # we do not set this option, then the linker will not be able to find the
- # required libraries when trying to run cvc5.
- #
- # Also embed the installation prefix of the installed contrib libraries as an
- # RPATH. This allows to install a dynamically linked binary that depends on
- # dynamically linked libraries. This is dangerous, as the installed binary
- # breaks if the contrib library is removed or changes in other ways, we thus
- # print a big warning and only allow if installing to a custom installation
- # prefix.
- #
- # More information on RPATH in CMake:
- # https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/RPATH-handling
- set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR};${PROJECT_SOURCE_DIR}/deps/install/lib")
-else()
- # When building statically, we *only* want static archives/libraries
- if (WIN32)
- set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a)
- else()
- set(CMAKE_FIND_LIBRARY_SUFFIXES .a)
- endif()
- set(BUILD_SHARED_LIBS OFF)
- cvc5_set_option(ENABLE_STATIC_BINARY ON)
-
- # Never build unit tests as static binaries, otherwise we'll end up with
- # ~300MB per unit test.
- if(ENABLE_UNIT_TESTING)
- message(STATUS "Disabling unit tests since static build is enabled.")
- set(ENABLE_UNIT_TESTING OFF)
- endif()
+# Embed the installation prefix as an RPATH in the executable such that the
+# linker can find our libraries (such as libcvc5parser) when executing the
+# cvc5 binary. This is for example useful when installing cvc5 with a custom
+# prefix on macOS (e.g. when using homebrew in a non-standard directory). If
+# we do not set this option, then the linker will not be able to find the
+# required libraries when trying to run cvc5.
+#
+# Also embed the installation prefix of the installed contrib libraries as an
+# RPATH. This allows to install a dynamically linked binary that depends on
+# dynamically linked libraries. This is dangerous, as the installed binary
+# breaks if the contrib library is removed or changes in other ways, we thus
+# print a big warning and only allow if installing to a custom installation
+# prefix.
+#
+# More information on RPATH in CMake:
+# https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/RPATH-handling
+set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR};${PROJECT_SOURCE_DIR}/deps/install/lib")
- if (BUILD_BINDINGS_PYTHON)
- message(FATAL_ERROR "Building Python bindings is not possible "
- "when building statically")
- endif()
+# Set visibility to default if unit tests are enabled
+if(ENABLE_UNIT_TESTING)
+ set(CMAKE_CXX_VISIBILITY_PRESET default)
+ set(CMAKE_VISIBILITY_INLINES_HIDDEN 0)
endif()
#-----------------------------------------------------------------------------#
# prevent this we always return with exit code 0 after the ctest command has
# finished.
setup_target_for_coverage_gcovr_html(
- NAME coverage
+ NAME coverage-test
EXECUTABLE
ctest -j${CTEST_NTHREADS} -LE "example"
--output-on-failure $$ARGS || exit 0
DEPENDS
build-tests)
+
+ # Adds targets `coverage` and `coverage-reset` for manually generating
+ # coverage reports for specific executions.
+ #
+ # Target coverage-reset resets all the coverage counters to zero, while
+ # target coverage will generate a coverage report for all executions since
+ # the last coverage-reset.
+ setup_target_for_coverage_lcov_no_executable(
+ NAME coverage
+ DEPENDENCIES cvc5-bin)
endif()
if(ENABLE_DEBUG_CONTEXT_MM)
add_definitions(-DCVC5_VALGRIND)
endif()
-if(USE_ABC)
- find_package(ABC REQUIRED)
- add_definitions(-DCVC5_USE_ABC ${ABC_ARCH_FLAGS})
-endif()
-
-if(USE_CADICAL)
- find_package(CaDiCaL REQUIRED)
- add_definitions(-DCVC5_USE_CADICAL)
-endif()
+find_package(CaDiCaL REQUIRED)
if(USE_CLN)
set(GPL_LIBS "${GPL_LIBS} cln")
# Provide targets to inspect iwyu suggestions
include(IWYU)
+include(fuzzing-murxla)
#-----------------------------------------------------------------------------#
include(ConfigureCvc5)
-if(NOT ENABLE_SHARED)
+if(ENABLE_STATIC_BUILD)
set(CVC5_STATIC_BUILD ON)
endif()
add_subdirectory(test)
+include(target-graphs)
+
#-----------------------------------------------------------------------------#
# Package configuration
#
# (in the assumption that only reasonably experienced users use this and
# also that custom installation prefixes are not used for longer periods of
# time anyway). Also, we print a big warning with further instructions.
-if(NOT ENABLE_STATIC_BINARY)
+if(NOT ENABLE_STATIC_BUILD)
# Get the libraries that cvc5 links against
- get_target_property(libs cvc5 INTERFACE_LINK_LIBRARIES)
+ get_target_property(libs cvc5-shared INTERFACE_LINK_LIBRARIES)
set(LIBS_SHARED_FROM_DEPS "")
foreach(lib ${libs})
# Filter out those that are linked dynamically and come from deps/install
write_basic_package_version_file(
${CMAKE_CURRENT_BINARY_DIR}/cvc5ConfigVersion.cmake
- VERSION ${CVC5_RELEASE_STRING}
+ VERSION ${CVC5_VERSION}
COMPATIBILITY ExactVersion
)
string(REPLACE ";" " " CVC5_DEFINITIONS "${CVC5_DEFINITIONS}")
message("")
-print_info("cvc5 ${CVC5_RELEASE_STRING}")
+print_info("cvc5 ${CVC5_VERSION}")
message("")
if(ENABLE_COMP_INC_TRACK)
print_config("Build profile " "${CVC5_BUILD_PROFILE_STRING} (incremental)")
print_config("Unit tests " ${ENABLE_UNIT_TESTING})
print_config("Valgrind " ${ENABLE_VALGRIND})
message("")
-print_config("Shared libs " ${ENABLE_SHARED})
-print_config("Static binary " ${ENABLE_STATIC_BINARY})
+print_config("Static build " ${ENABLE_STATIC_BUILD})
print_config("Python bindings " ${BUILD_BINDINGS_PYTHON})
print_config("Java bindings " ${BUILD_BINDINGS_JAVA})
print_config("Python2 " ${USE_PYTHON2})
+print_config("Interprocedural opt. " ${ENABLE_IPO})
message("")
-print_config("ABC " ${USE_ABC})
-print_config("CaDiCaL " ${USE_CADICAL})
-print_config("CryptoMiniSat " ${USE_CRYPTOMINISAT})
+print_config("CryptoMiniSat " ${USE_CRYPTOMINISAT} FOUND_SYSTEM ${CryptoMiniSat_FOUND_SYSTEM})
print_config("GLPK " ${USE_GLPK})
-print_config("Kissat " ${USE_KISSAT})
-print_config("LibPoly " ${USE_POLY})
-print_config("CoCoALib " ${USE_COCOA})
-message("")
-print_config("Build libcvc5 only " ${BUILD_LIB_ONLY})
+print_config("Kissat " ${USE_KISSAT} FOUND_SYSTEM ${Kissat_FOUND_SYSTEM})
+print_config("LibPoly " ${USE_POLY} FOUND_SYSTEM ${Poly_FOUND_SYSTEM})
+print_config("CoCoALib " ${USE_COCOA} FOUND_SYSTEM ${CoCoA_FOUND_SYSTEM})
if(CVC5_USE_CLN_IMP)
- print_config("MP library " "cln")
+ print_config("MP library " "cln" FOUND_SYSTEM ${CLN_FOUND_SYSTEM})
else()
- print_config("MP library " "gmp")
+ print_config("MP library " "gmp" FOUND_SYSTEM ${GMP_FOUND_SYSTEM})
endif()
print_config("Editline " ${USE_EDITLINE})
message("")
print_config("Api docs " ${BUILD_DOCS})
message("")
-if(ABC_DIR)
- print_config("ABC dir " ${ABC_DIR})
-endif()
if(GLPK_DIR)
print_config("GLPK dir " ${GLPK_DIR})
endif()
"\n"
"Note that this configuration is NOT built against any GPL'ed libraries, so"
"\n"
- "it is covered by the (modified) BSD license. This is, however, not the best"
+ "it is covered by the (modified) BSD license. To build against GPL'ed"
"\n"
- "performing configuration of cvc5. To build against GPL'ed libraries which"
+ "libraries which can improve cvc5's performance on arithmetic and bitvector"
"\n"
- "improve cvc5's performance, re-configure with '-DENABLE_GPL -DENABLE_BEST'."
+ "logics, re-configure with '-DENABLE_GPL -DENABLE_BEST'."
)
endif()
projects / cvc5.git / blobdiff