(no commit message)

[libreriscv.git] / HDL_workflow / coriolis2.mdwn

diff --git a/HDL_workflow/coriolis2.mdwn b/HDL_workflow/coriolis2.mdwn
index 95c51a9add19657f2caef259c9afc99d48045bad..6f612f76a57f3e338fd388ae418b1de0076c1741 100644 (file)
--- a/HDL_workflow/coriolis2.mdwn
+++ b/HDL_workflow/coriolis2.mdwn
@@ -1,25 +1,34 @@
 # Installing Coriolis2
 
-TODO: include tasyagle <https://www-soc.lip6.fr/en/team-cian/softwares/tasyagle/>
-
 Videos and links:
 
 * <https://www.youtube.com/watch?v=TN9AQgoVwDw&list=PLj2N46Uqs4huGN-redGHVEILPz17OBu37&index=11>
 * <http://coriolis.lip6.fr/>
 * <https://gitlab.lip6.fr/vlsi-eda>
+* <https://www.youtube.com/watch?v=C0diiTc7_VI&list=PLBtNqZjUZB80uByfZVm0gGYEtmTG0mZzm&index=5>
+* <https://www.youtube.com/watch?v=e0ATrAlNzWk>
+* <https://fosdem.org/2022/schedule/event/coriolis2/>
+* <https://archive.fosdem.org/2021/schedule/event/alliance/>
+* <https://www.youtube.com/watch?v=TN9AQgoVwDw>
+* HiTas (tasyagle) page: [[tasyagle]]
 
 ## Automated Installation - One-liner
+
 The new automated method of installing/setting up Coriolis2 is as follows:
 
 1. Clone the repo "dev-env-setup".
-Tutorial assumes the directory is located under user's home.
-1. Run the script "coriolis2-chroot" to create a new chroot environment,
-and setup Coriolis2.
-1. Once cgt window appears, go to File, Open Cell, and type chip_r.
-1. You should now have a working Coriolis chroot!
-
-In a terminal:
-
+  <https://git.libre-soc.org/?p=dev-env-setup.git;a=summary>
+  Tutorial assumes the directory is located under user's home.
+2. Run the script "coriolis2-chroot" to create a new chroot environment,
+   and setup Coriolis2.
+3. Once cgt window appears, go to File, Open Cell, and type chip_r.
+4. You should now have a working Coriolis chroot!
+
+In a terminal (of course you checked what this does before running
+it because it is "commands downloaded off the internet", and you
+of course take absolute and complete and full responsibility):
+
+    $ git clone https://git.libre-soc.org/git/dev-env-setup.git
     $ cd ~/dev-env-setup
     $ sudo bash
     # ./coriolis2-chroot
@@ -288,6 +297,7 @@ netlists generated by yosys we use coriolis and
 alliace installed above by doing the following 
 (using experiment9 as an example):
 
+    $ source ~/coriolisenv  # if not done already
     $ cd ~/src
     $ git clone https://git.libre-soc.org/git/soclayout.git
     $ cd soclayout/
@@ -352,7 +362,9 @@ Follow these instructions to build the ls180 GDS-II files
 * run the coriolis2-chroot script as root
 * drop into the schroot
 * navigate to the soclayout/experiments9 directory
-* run the ./build_full_4k_sram.sh script
+* check out the final tag
+  <https://git.libre-soc.org/?p=soclayout.git;a=tag;h=refs/tags/LS180_RC8_FINAL>
+* run the ./build_full_4k_sram_recon.sh script
 * run "make view" to see the results.
 
 The FreePDK45 Chips4Makers FlexLib variant is slightly
@@ -377,9 +389,11 @@ $ cd dev-env-setup
 $ sudo bash
 # ./coriolis2-chroot
 # exit
-$ schroot -c cotiolis
+$ schroot -c coriolis
+$ source ~/coriolisenv
 $ cd soclayout/experiments9
-$ ./build_full_4k_sram.sh
+$ git checkout LS180_RC8_FINAL
+$ ./build_full_4k_sram_recon.sh
 ```
 (now do something else for the next 90 minutes)