# Notes for nextpnr-xilinx
+superceded: see page [[nextpnr-xilinx]] and devscript
+<https://git.libre-soc.org/?p=dev-env-setup.git;a=blob;f=nextpnr-xilinx-install;hb=HEAD>
+
for compiling nextpnr-xilinx and making it useable for nmigen
to compile for the digilent arty-a7-100t, requires a little
futzing around, using the symbiflow version of prjxray-db
mkdir -p /usr/share/nextpnr/xilinx-chipdb
cp xilinx/*.bin /usr/share/nextpnr/xilinx-chipdb
cp -aux xilinx/external/prjxray-db /usr/share/nextpnr
+
+# Additional Useful Info for UART <-> USB Serial Interface Through OrangeCrab's Built-in USB Interface
+
+This uses OrangeCrab's built-in USB interface, rather than needing a
+separate USB-serial adapter. see the following for further details:
+
+* <https://github.com/antonblanchard/microwatt/pull/347#issuecomment-1058800570>
+* <https://github.com/antonblanchard/microwatt/pull/347#issuecomment-1058834790>
+
+# running orangecrab-examples before flashing microwatt
+
+See <https://github.com/orangecrab-fpga/orangecrab-hardware/blob/main/contrib/10-orangecrab.rules>
+
+If the OrangeCrab is running in DFU mode, lsusb will show:
+
+ 1209:5af0 Generic OrangeCrab r0.2 DFU Bootloader v3.1-6-g62e92e2
+
+OrangeCrab has two DFU devices:
+
+ Found DFU: [1209:5af0] ver=0101, devnum=22, cfg=1, intf=0, path="1-4.2", alt=1, name="0x00100000 RISC-V Firmware", serial="UNKNOWN"
+ Found DFU: [1209:5af0] ver=0101, devnum=22, cfg=1, intf=0, path="1-4.2", alt=0, name="0x00080000 Bitstream", serial="UNKNOWN"
+
+Then clone and patch orangecrab-examples:
+
+ git clone https://github.com/orangecrab-fpga/orangecrab-examples
+ patch -p1 < orangecrab-examples.diff
+
+To build and flash the example:
+
+ pushd orangecrab-examples/nmigen
+ python3 blink.py
+ popd
+ sudo dfu-util -D orangecrab-examples/nmigen/build/top.bit -a 0