* ftp server (<https://ftp.libre-soc.org/>): large (temporary,
auto-generated) file store.
-We will add an IRC channel at some point when there are enough people
-to warrant having one (and it will be publicly archived)
-
Note also the lack of a "forum" in the above list. this is very
deliberate. forums are a serious distraction when it comes to technical
heavily goal-orientated development. recent internet users may enjoy
# Software prerequisites<a name="software-prerequisites"></a>
+**Please make sure if you install manually that you install dependencies
+in strict order. Failing to adhere to this will result in pip3 downloading
+unauthorised older software versions. See
+<http://lists.libre-soc.org/pipermail/libre-soc-dev/2021-September/003666.html>**
+
Whilst many resources online advocate "`sudo`" in front of all root-level
commands below, this quickly becomes tiresome. run "`sudo bash`", get a
root prompt, and save yourself some typing.
* sudo bash
* apt-get install vim exuberant-ctags
* apt-get install build-essential
-* apt-get install git python3.7 python3.7-dev python-nosetest3
+* apt-get install git python3.7 python3.7-dev python3-nose
* apt-get install graphviz xdot gtkwave
* apt-get install python3-venv
* apt-get install python-virtualenv # this is an alternative to python3-venv
get "lost" or isolated and out of touch due to major branch diversion,
and that people communicate and coordinate with each other.
+This is not a hard rule: under special cirmstances branches can be useful.
+They should not however be considered "routine".
+
## yosys
Follow the source code (git clone) instructions here, do **not** use
<http://www.clifford.at/yosys/download.html>
Or, alternatively, use the
-[yosys-et-al](https://git.libre-soc.org/?p=dev-env-setup.git;a=blob;f=yosys-et-al;hb=HEAD)
+[hdl-tools-yosys](https://git.libre-soc.org/?p=dev-env-setup.git;a=blob;f=hdl-tools-yosys;hb=HEAD)
script (which also installs symbiyosys and its dependencies)
Do not try to use a fixed revision of yosys (currently 0.9), nmigen is
## nmigen
-[nmigen](https://m-labs.hk/gateware/nmigen/) may be installed as follows:
+**PLEASE NOTE: it is critical to install nmigen as the first dependency
+prior to installing any further python-based Libre-SOC HDL repositories.
+If "pip3 list" shows that nmigen has been auto-installed please remove it**
+
+[nmigen](https://nmigen.info/) may be installed as follows:
* mkdir ~/src
* cd !$
You can test your installation by doing the following:
python3
- >>> from sfpy import *
+ >>> from sfpy import Posit8
>>> Posit8(1.3)
It should print out `Posit8(1.3125)`
A portable FPGA place and route tool.
-See [[HDL_workflow/nextpnr]] page for installation instructions of nextpnr with ECP5 support for Lattice FPGA ECP5 series.
+See [[HDL_workflow/nextpnr]] page for installation instructions of nextpnr with ECP5 support for Lattice FPGA ECP5 series. Also see
+[[HDL_workflow/ECP5_FPGA]] for connecting up to JTAG with a ULX3S
+and the Lattice VERSA_ECP5.
## Verilator
See [[HDL_workflow/cocotb]] page for installation instructions.
+## Symbiflow
+
+A fully open source toolchain for the development of FPGAs. Currently it targets Xilinx 7-series, Lattice iCE40 and ECP5, Quicklogic EOS S3.
+
+Needed for the Arty A7 100t Digilent FPGA board.
+
+See [[HDL_workflow/symbiflow]] for installation instructions
+and dependencies.
+
# Registering for git repository access<a name="gitolite3_access"></a>
After going through the onboarding process and having agreed to take
dependencies. This is easiest done with this script
<https://git.libre-soc.org/?p=dev-env-setup.git;a=blob;f=install-hdl-apt-reqs;hb=HEAD>
+**It is critically important to install these in STRICT order, otherwise
+pip3 interferes and performs unauthorised downloads without informing
+you of what it is doing**.
+
* mkdir ~/src
* cd !$
* git clone gitolite3@git.libre-soc.org:nmigen.git
* git clone gitolite3@git.libre-soc.org:nmigen-soc.git
* git clone gitolite3@git.libre-soc.org:soc.git
-In each of these directories, in the order listed, track down the
+In each of these directories, **in the order listed***, track down the
`setup.py` file, then, as root (`sudo bash`), run the following:
* python3 setup.py develop
own machine these days.
The reason for the order is because soc depends on ieee754fpu, and
-ieee754fpu depends on nmutil
+ieee754fpu depends on nmutil. If you do not follow the listed order
+pip3 will go off and download an arbitrary version without your
+consent.
If "`python3 setup.py install`" is used it is a pain: edit, then
install. edit, then install. It gets extremely tedious, hence why
* Although a verilog example this is very useful to do
<https://symbiyosys.readthedocs.io/en/latest/quickstart.html#first-step-a-simple-bmc-example>
* This tutorial looks pretty good and will get you started
- <http://blog.lambdaconcept.com/doku.php?id=nmigen:nmigen_install> and
- walks not just through simulation, it takes you through using gtkwave
- as well.
+ <https://web.archive.org/web/20210123052724/http://blog.lambdaconcept.com/doku.php?id=nmigen:nmigen_install>
+ and walks not just through simulation, it takes you through using
+ gtkwave as well.
* There exist several nmigen examples which are also executable
- <https://github.com/m-labs/nmigen/tree/master/examples/> exactly as
+ <https://github.com/nmigen/nmigen/tree/master/examples/> exactly as
described in the above tutorial (python3 filename.py -h)
-
+* More nmigen tutorials at [[learning_nmigen]]
projects / libreriscv.git / blobdiff