SHELL = /bin/sh
-INSTALL = cp
+INSTALL = $${srcroot}/install.sh -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
+INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
AS = as
AR = ar
MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \
then echo $${rootme}/texinfo/makeinfo/makeinfo ; \
else echo makeinfo ; fi`
+# This just becomes part of the MAKEINFO definition passed down to
+# sub-makes. It lets flags be given on the command line while still
+# using the makeinfo from the object tree.
+MAKEINFOFLAGS =
EXPECT = `if [ -f $${rootme}/expect/expect ] ; \
then echo $${rootme}/expect/expect ; \
OTHERS =
ALL = all.normal
-INSTALL_TARGET = install-dirs $(INSTALL_MODULES) $(INSTALL_TARGET_MODULES) $(INSTALL_X11_MODULES)
+INSTALL_TARGET = install-dirs \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ install-gcc
CC_FOR_TARGET = ` \
if [ -f $${rootme}/gcc/Makefile ] ; then \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
- 'GCC_FOR_TARGET=$$(CC_FOR_TARGET)' \
+ "GCC_FOR_TARGET=$$(CC_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "INSTALL_XFORM=$(INSTALL_XFORM)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"LOADLIBES=$(LOADLIBES)" \
- "MAKEINFO=$(MAKEINFO)" \
+ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"MUNCH_NM=$(MUNCH_NM)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
"PRMS=$(PRMS)" \
# end-sanitize-chill
# The first rule in the file had better be this one. Don't put any above it.
-all: $(ALL)
+all: all.normal
.PHONY: all
# The target built for a native build.
$(ALL_X11_MODULES) \
all-gcc
-# The target built for a cross build.
-.PHONY: all.cross
-all.cross: \
- all-bfd \
- all-binutils \
- all-byacc \
- all-dejagnu \
- all-flex \
- all-gas \
- all-gcc \
- all-gdb \
- all-ld \
- all-libiberty \
- all-mmalloc \
- all-opcodes \
- all-readline \
- all-sim \
- $(ALL_TARGET_MODULES)
-
# Do a target for all the subdirectories. A ``make do-X'' will do a
# ``make X'' in all subdirectories (because, in general, there is a
# dependency (below) of X upon do-X, a ``make X'' will also do this,
installcheck: do-installcheck
dvi: do-dvi
-install-info: install-info-dirs do-install-info dir.info
+install-info: do-install-info dir.info
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
if [ -f dir.info ] ; then \
$(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
else true ; fi
-do-install-info: install-info-dirs
-
local-clean:
-rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
vault-install:
@if [ -f ./release/vault-install ] ; then \
./release/vault-install $(host_alias) $(target_alias) ; \
+ else \
+ true ; \
fi
.PHONY: install.all
true ; \
fi
-# install-no-fixedincludes is used because Cygnus can not distributed
+# install-no-fixedincludes is used because Cygnus can not distribute
# the fixed header files.
.PHONY: install-no-fixedincludes
install-no-fixedincludes: \
install-dirs \
- gcc-no-fixedincludes \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
- $(INSTALL_X11_MODULES)
+ $(INSTALL_X11_MODULES) \
+ gcc-no-fixedincludes
# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute. This rule is very
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
-.PHONY: install.cross
-install.cross: \
- install-dirs \
- install-binutils \
- install-byacc \
- install-dejagnu \
- install-etc \
- install-flex \
- install-gas \
- install-gcc \
- install-gdb \
- install-glob \
- install-ld \
- install-libiberty \
- install-mmalloc \
- install-opcodes \
- install-readline \
- $(INSTALL_TARGET_MODULES)
-
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
# all-glob is handled specially because it doesn't actually build.
if [ -f ./$${dir}/Makefile ] ; then \
rootme=`pwd`; export rootme; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) install); \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
else \
true; \
fi
fi ; \
done
-.PHONY: install-info-dirs
-install-info-dirs:
- if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; fi
- -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
- if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
- -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
dir.info: do-install-info
if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
# Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
DEVO_SUPPORT= README Makefile.in configure configure.in \
- config.guess config.sub config move-if-change
+ config.guess config.sub config move-if-change \
+ COPYING COPYING.LIB install.sh
ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
configure.texi standards.texi make-stds.texi
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
ln -s proto-toplev gdb-$$VER; \
echo "==> Making gdb-$$VER.tar.Z"; \
tar cfh - gdb-$$VER | $(COMPRESS) -v >gdb-$$VER.tar.Z; \
- echo "==> Making gdb-$$VER.tar.z"; \
- tar cfh - gdb-$$VER | $(GZIP) -v -9 >gdb-$$VER.tar.z)
+ echo "==> Making gdb-$$VER.tar.gz"; \
+ tar cfh - gdb-$$VER | $(GZIP) -v -9 >gdb-$$VER.tar.gz)
# Make the testsuite archive separately.
ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite
gdb-$$VER/config.sub gdb-$$VER/move-if-change \
gdb-$$VER/gdb/testsuite | \
$(COMPRESS) -v >gdb-$$VER-testsuite.tar.Z; \
- echo "==> Making gdb-$$VER-testsuite.tar.z"; \
+ echo "==> Making gdb-$$VER-testsuite.tar.gz"; \
tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
gdb-$$VER/config.sub gdb-$$VER/move-if-change \
gdb-$$VER/gdb/testsuite | \
- $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.z)
+ $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.gz)
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
# Directories that might want `make diststuff' run.
-DISTSTUFFDIRS= ld gprof gdb
+DISTSTUFFDIRS= ld gprof gdb libg++
.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo
./configure sun4
- $(MAKE) clean
- ./configure -rm sun4
- chmod og=u `find etc $(DEVO_SUPPORT) $(SUPPORT_FILES) $(TOOL) -print`
# Make links, and run "make diststuff" when needed.
# The `echo' for setting `p' is to convert all whitespace to spaces.
# Then the `case' further below should tell whether $$d is in
case " $$p " in \
*" $$d "*) \
echo making diststuff in $$d ; \
- (cd $$d ; $(MAKE) -f Makefile.in diststuff) || exit 1 ;; \
+ (cd $$d ; $(MAKE) diststuff) || exit 1 ;; \
esac ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
+ $(MAKE) distclean
#
mkdir proto-toplev/etc
(cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
- chmod og=u `find proto-toplev -print`
+ chmod og=u `find . -print`
(VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
- echo "==> Making $(TOOL)-$$VER.tar.z"; \
- ln -s proto-toplev $(TOOL)-$$VER; \
+ echo "==> Making $(TOOL)-$$VER.tar.gz"; \
+ rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
tar cfh - $(TOOL)-$$VER \
- | $(GZIP) -v -9 >$(TOOL)-$$VER.tar.z)
+ | $(GZIP) -v -9 >$(TOOL)-$$VER.tar.gz)
TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
-.PHONY: gas.tar.z
+.PHONY: gas.tar.gz
GAS_SUPPORT_DIRS= bfd include libiberty opcodes
-gas.tar.z: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
+gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas
# The FSF "binutils" release includes gprof and ld.
-.PHONY: binutils.tar.z
+.PHONY: binutils.tar.gz
BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof
-binutils.tar.z: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
+binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" TOOL=binutils
-.PHONY: gas+binutils.tar.z
+.PHONY: gas+binutils.tar.gz
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.z: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
+gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" TOOL=gas
+.PHONY: libg++.tar.gz
+LIBGXX_SUPPORT_DIRS=include libiberty xiberty
+libg++.tar.gz: $(DIST_SUPPORT) libg++
+ $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)" TOOL=libg++
+
.NOEXPORT:
MAKEOVERRIDES=