# Some platforms don't like blank entries, so we remove duplicate,
# leading and trailing colons.
REALLY_SET_LIB_PATH = \
+ @SET_GCC_LIB_PATH@ \
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
# This is the list of directories to be built for the build system.
-BUILD_CONFIGDIRS = libiberty libbanshee
+BUILD_CONFIGDIRS = libiberty
# Build programs are put under this directory.
BUILD_SUBDIR = @build_subdir@
# This is set by the configure script to the arguments to use when configuring
OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \
- GMPINC="$(HOST_GMPINC)"; export GMPINC;
+ GMPINC="$(HOST_GMPINC)"; export GMPINC; \
+ SET_GCC_LIB_PATH_CMD="@SET_GCC_LIB_PATH@"; export SET_GCC_LIB_PATH_CMD; \
+ @SET_GCC_LIB_PATH@
# Similar, for later GCC stages.
STAGE_HOST_EXPORTS = \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
- WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES;
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ SET_GCC_LIB_PATH_CMD="@SET_GCC_LIB_PATH@"; export SET_GCC_LIB_PATH_CMD; \
+ @SET_GCC_LIB_PATH@
RAW_CXX_TARGET_EXPORTS = \
$(BASE_TARGET_EXPORTS) \
CXX_FOR_BUILD = $(CXX)
-# Path to the build directory for a Canadian cross, empty otherwise.
-BUILD_DIR_PREFIX = @BUILD_DIR_PREFIX@
-
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
BUILD_PREFIX = @BUILD_PREFIX@
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
+# Flags to pass to stage2 and later makes. They are defined
+# here so that they can be overridden by Makefile fragments.
+BOOT_CFLAGS= -g -O2
+
CONFIGURED_BISON = @CONFIGURED_BISON@
-BISON = `if [ -f $$r/$(BUILD_DIR_PREFIX)/bison/bison ] ; then \
- echo $$r/$(BUILD_DIR_PREFIX)/bison/bison -L $$s/bison/ ; \
+BISON = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
+ echo $$r/$(BUILD_SUBDIR)/bison/tests/bison ; \
else \
echo ${CONFIGURED_BISON} ; \
fi`
CONFIGURED_YACC = @CONFIGURED_YACC@
-YACC = `if [ -f $$s/$(BUILD_DIR_PREFIX)/bison/bison ] ; then \
- echo $$r/$(BUILD_DIR_PREFIX)/bison/bison -y -L $$s/bison/ ; \
- elif [ -f $$s/$(BUILD_DIR_PREFIX)/byacc/byacc ] ; then \
- echo $$r/$(BUILD_DIR_PREFIX)/byacc/byacc ; \
+YACC = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
+ echo $$r/$(BUILD_SUBDIR)/bison/tests/bison -y ; \
+ elif [ -f $$r/$(BUILD_SUBDIR)/byacc/byacc ] ; then \
+ echo $$r/$(BUILD_SUBDIR)/byacc/byacc ; \
else \
echo ${CONFIGURED_YACC} ; \
fi`
CONFIGURED_FLEX = @CONFIGURED_FLEX@
-FLEX = `if [ -f $$r/$(BUILD_DIR_PREFIX)/flex/flex ] ; \
- then echo $$r/$(BUILD_DIR_PREFIX)/flex/flex ; \
+FLEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \
+ then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \
else echo ${CONFIGURED_FLEX} ; fi`
CONFIGURED_LEX = @CONFIGURED_LEX@
-LEX = `if [ -f $$r/$(BUILD_DIR_PREFIX)/flex/flex ] ; \
- then echo $$r/$(BUILD_DIR_PREFIX)/flex/flex ; \
+LEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \
+ then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \
else echo ${CONFIGURED_LEX} ; fi`
CONFIGURED_M4 = @CONFIGURED_M4@
-M4 = `if [ -f $$r/$(BUILD_DIR_PREFIX)/m4/m4 ] ; \
- then echo $$r/$(BUILD_DIR_PREFIX)/m4/m4 ; \
+M4 = `if [ -f $$r/$(BUILD_SUBDIR)/m4/m4 ] ; \
+ then echo $$r/$(BUILD_SUBDIR)/m4/m4 ; \
else echo ${CONFIGURED_M4} ; fi`
# For an installed makeinfo, we require it to be from texinfo 4.2 or
# makeinfo even if only the Makefile is there, because Texinfo builds its
# manual when made, and it requires its own version.
CONFIGURED_MAKEINFO = @CONFIGURED_MAKEINFO@
-MAKEINFO = `if [ -f $$r/$(BUILD_DIR_PREFIX)/texinfo/makeinfo/Makefile ] ; \
- then echo $$r/$(BUILD_DIR_PREFIX)/texinfo/makeinfo/makeinfo ; \
+MAKEINFO = `if [ -f $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/Makefile ] ; \
+ then echo $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo ; \
else if (${CONFIGURED_MAKEINFO} --version \
| egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \
then echo ${CONFIGURED_MAKEINFO}; else echo $$s/missing makeinfo; fi; fi`
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
'NM=$(NM)' \
+ 'PICFLAG=$(PICFLAG)' \
'RANLIB=$(RANLIB)' \
'WINDRES=$(WINDRES)'
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
+ 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS)
.PHONY: configure-host
-configure-host: maybe-configure-gcc [+
+configure-host: [+
FOR host_modules +] \
maybe-configure-[+module+][+
ENDFOR host_modules +]
# The target built for a native non-bootstrap build.
.PHONY: all
-all: all-build all-host all-target
+all: unstage all-host all-target stage
.PHONY: all-build
all-build: [+
maybe-all-build-[+module+][+
ENDFOR build_modules +]
.PHONY: all-host
-all-host: maybe-all-gcc [+
+all-host: [+
FOR host_modules +] \
maybe-all-[+module+][+
ENDFOR host_modules +]
# but it may do additional work as well).
[+ FOR recursive_targets +]
.PHONY: do-[+make_target+]
-do-[+make_target+]: [+make_target+]-host [+make_target+]-target
+do-[+make_target+]: unstage [+make_target+]-host [+make_target+]-target stage
.PHONY: [+make_target+]-host
-[+make_target+]-host: maybe-[+make_target+]-gcc [+
+[+make_target+]-host: [+
FOR host_modules +] \
maybe-[+make_target+]-[+module+][+
ENDFOR host_modules +]
# Here are the targets which correspond to the do-X targets.
-.PHONY: info installcheck dvi install-info
+.PHONY: info installcheck dvi html install-info
.PHONY: clean distclean mostlyclean maintainer-clean realclean
.PHONY: local-clean local-distclean local-maintainer-clean
info: do-info
installcheck: do-installcheck
dvi: do-dvi
+html: do-html
# Make sure makeinfo is built before we do a `make info', if we're
# in fact building texinfo.
(cd gcc/libgcc && find . -type d -print) | \
while read d; do rm -f gcc/$$d/libgcc.a || : ; done
-rm -rf gcc/libgcc
+ -rm -f gcc/stmp-dirs
# Check target.
check: do-check
# Only include modules actually being configured and built.
-do-check: maybe-check-gcc [+
+do-check: unstage [+
FOR host_modules +] \
maybe-check-[+module+][+
ENDFOR host_modules +][+
FOR target_modules +] \
maybe-check-target-[+module+][+
- ENDFOR target_modules +]
+ ENDFOR target_modules +] stage
# Automated reporting of test results.
.PHONY: install-host-nogcc
install-host-nogcc: [+
- FOR host_modules +] \
- maybe-install-[+module+][+
+ FOR host_modules +][+ IF (not (= (get "module") "gcc")) +] \
+ maybe-install-[+module+][+ ENDIF +][+
ENDFOR host_modules +]
.PHONY: install-host
-install-host: maybe-install-gcc [+
+install-host: [+
FOR host_modules +] \
maybe-install-[+module+][+
ENDFOR host_modules +]
.PHONY: all-build-[+module+] maybe-all-build-[+module+]
maybe-all-build-[+module+]:
@if build-[+module+]
+TARGET-build-[+module+]=[+ IF target +][+target+][+ ELSE +]all[+ ENDIF target +]
maybe-all-build-[+module+]: all-build-[+module+]
all-build-[+module+]: configure-build-[+module+]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(BUILD_EXPORTS) \
- (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) [+extra_make_flags+] all)
+ (cd $(BUILD_SUBDIR)/[+module+] && \
+ $(MAKE) [+extra_make_flags+] $(TARGET-build-[+module+]))
@endif build-[+module+]
[+ ENDFOR build_modules +]
@if [+module+]
maybe-configure-[+module+]: configure-[+module+]
configure-[+module+]:
- @test ! -f [+module+]/Makefile || exit 0; \
+ @[+ IF bootstrap +]test -f stage_last && exit 0; \
+ [+ ENDIF bootstrap +]test ! -f [+module+]/Makefile || exit 0; \
[ -d [+module+] ] || mkdir [+module+]; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
.PHONY: all-[+module+] maybe-all-[+module+]
maybe-all-[+module+]:
@if [+module+]
+TARGET-[+module+]=[+ IF target +][+target+][+ ELSE +]all[+ ENDIF target +]
maybe-all-[+module+]: all-[+module+]
all-[+module+]: configure-[+module+]
- @r=`${PWD_COMMAND}`; export r; \
+ @[+ IF bootstrap +]test -f stage_last && exit 0; \
+ [+ ENDIF bootstrap +]r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
- (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
- IF with_x
- +] $(X11_FLAGS_TO_PASS)[+
- ENDIF with_x +] [+extra_make_flags+] all)
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] \
+ $(TARGET-[+module+]))
@endif [+module+]
.PHONY: check-[+module+] maybe-check-[+module+]
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
- (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
- IF with_x
- +] $(X11_FLAGS_TO_PASS)[+
- ENDIF with_x +] [+extra_make_flags+] check); \
+ (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS) [+
+ extra_make_flags+] check); \
fi
[+ ELSE check +]
check-[+module+]:
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
(cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
- IF with_x
- +] $(X11_FLAGS_TO_PASS)[+
- ENDIF with_x +] [+extra_make_flags+] check)
+ extra_make_flags+] check)
[+ ENDIF no_check +]
@endif [+module+]
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
(cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
- IF with_x
- +] $(X11_FLAGS_TO_PASS)[+
- ENDIF with_x +] [+extra_make_flags+] install)
+ extra_make_flags+] install)
[+ ENDIF no_install +]
@endif [+module+]
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS); do \
+ for flag in $(EXTRA_HOST_FLAGS) [+extra_make_flags+]; do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
echo "Doing [+make_target+] in [+module+]" ; \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- [+extra_make_flags+] [+make_target+]) \
+ [+make_target+]) \
|| exit 1
[+ ENDIF +]
@endif [+module+]
.PHONY: all-target-[+module+] maybe-all-target-[+module+]
maybe-all-target-[+module+]:
@if target-[+module+]
+TARGET-target-[+module+]=[+ IF target +][+target+][+ ELSE +]all[+ ENDIF target +]
maybe-all-target-[+module+]: all-target-[+module+]
all-target-[+module+]: configure-target-[+module+]
@r=`${PWD_COMMAND}`; export r; \
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
ENDIF raw_cxx
- +] [+extra_make_flags+] all)
+ +] [+extra_make_flags+] $(TARGET-target-[+module+]))
@endif target-[+module+]
.PHONY: check-target-[+module+] maybe-check-target-[+module+]
# GCC module
# ----------
-# Unfortunately, while gcc _should_ be a host module,
-# libgcc is a target module, and gen* programs are
-# build modules. So GCC is a sort of hybrid.
-
-# gcc is the only module which uses GCC_FLAGS_TO_PASS.
-# Don't use shared host config.cache, as it will confuse later
-# directories; GCC wants slightly different values for some
-# precious variables. *sigh*
-
-# We must skip configuring if toplevel bootstrap is going.
-.PHONY: configure-gcc maybe-configure-gcc
-maybe-configure-gcc:
-@if gcc
-maybe-configure-gcc: configure-gcc
-configure-gcc:
-@endif gcc
-@if gcc-no-bootstrap
- @test ! -f gcc/Makefile || exit 0; \
- [ -d gcc ] || mkdir gcc; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(HOST_EXPORTS) \
- echo Configuring in gcc; \
- cd gcc || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/gcc"; \
- libsrcdir="$$s/gcc";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/gcc"; \
- libsrcdir="$$s/gcc";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- || exit 1
-@endif gcc-no-bootstrap
-
-# Don't 'make all' in gcc if it's already been made by 'bootstrap'; that
-# causes trouble. This wart will be fixed eventually by moving
-# the bootstrap behavior to this file.
-.PHONY: all-gcc maybe-all-gcc
-maybe-all-gcc:
-@if gcc
-maybe-all-gcc: all-gcc
-all-gcc: configure-gcc
-@endif gcc
@if gcc-no-bootstrap
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- if [ -f gcc/stage_last ] ; then \
- (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) quickstrap); \
- else \
- (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
- fi
+# GCC has some more recursive targets, which trigger the old
+# (but still current, until the toplevel bootstrap project
+# is finished) compiler bootstrapping rules.
-# Building GCC uses some tools for rebuilding "source" files
-# like texinfo, bison/byacc, etc. So we must depend on those.
-#
-# While building GCC, it may be necessary to run various target
-# programs like the assembler, linker, etc. So we depend on
-# those too.
-#
-# In theory, on an SMP all those dependencies can be resolved
-# in parallel.
-#
GCC_STRAP_TARGETS = bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
.PHONY: $(GCC_STRAP_TARGETS)
-$(GCC_STRAP_TARGETS): all-bootstrap configure-gcc
+$(GCC_STRAP_TARGETS): all-prebootstrap configure-gcc
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all
-profiledbootstrap: all-bootstrap configure-gcc
+profiledbootstrap: all-prebootstrap configure-gcc
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
- echo "Bootstrapping the compiler"; \
+ echo "Bootstrapping training compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stageprofile_build
@r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
- $(SET_LIB_PATH) \
- echo "Building runtime libraries and training compiler"; \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
- @r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
echo "Building feedback based compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stagefeedback_build
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
+ $(SET_LIB_PATH) \
+ echo "Building runtime libraries"; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
.PHONY: cross
-cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
+cross: all-build all-gas all-ld
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) LANGUAGES="c c++" all
@endif gcc-no-bootstrap
-.PHONY: check-gcc maybe-check-gcc
-maybe-check-gcc:
@if gcc
-maybe-check-gcc: check-gcc
-check-gcc:
- @if [ -f ./gcc/Makefile ] ; then \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
- else \
- true; \
- fi
-
.PHONY: check-gcc-c++
check-gcc-c++:
@if [ -f ./gcc/Makefile ] ; then \
.PHONY: check-c++
check-c++: check-target-libstdc++-v3 check-gcc-c++
-@endif gcc
-
-.PHONY: install-gcc maybe-install-gcc
-maybe-install-gcc:
-@if gcc
-maybe-install-gcc: install-gcc
-install-gcc:
- @if [ -f ./gcc/Makefile ] ; then \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
- else \
- true; \
- fi
-@endif gcc
# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute. This rule is very
rm -rf gcc/include; \
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
-
-# Other targets (dvi, info, etc.)
-[+ FOR recursive_targets +]
-.PHONY: maybe-[+make_target+]-gcc [+make_target+]-gcc
-maybe-[+make_target+]-gcc:
-@if gcc
-maybe-[+make_target+]-gcc: [+make_target+]-gcc
-[+make_target+]-gcc: [+
- FOR depend +]\
- [+depend+]-gcc [+
- ENDFOR depend +]
- @[ -f ./gcc/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- for flag in $(EXTRA_GCC_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- $(HOST_EXPORTS) \
- echo "Doing [+make_target+] in gcc" ; \
- (cd gcc && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- [+make_target+]) \
- || exit 1
@endif gcc
-[+ ENDFOR recursive_targets +]
-
-@if gcc-bootstrap
# ---------------------
# GCC bootstrap support
# ---------------------
-# We track the current stage (the one in 'gcc') in the stage_last file.
+# We track the current stage (the one in 'gcc') in the stage_current file.
+# stage_last instead tracks the stage that was built last. These targets
+# are dummy when toplevel bootstrap is not active.
+
+.PHONY: unstage
+unstage:
+@if gcc-bootstrap
+ @[ -f stage_current ] || $(MAKE) `cat stage_last`-start
+@endif gcc-bootstrap
+
+.PHONY: stage
+stage:
+@if gcc-bootstrap
+ @$(MAKE) `cat stage_current`-end
+@endif gcc-bootstrap
+
# We name the build directories for the various stages "stage1-gcc",
# "stage2-gcc","stage3-gcc", etc.
# (both in a combined tree, or separately). This however requires some
# change to the gcc driver, again in order to avoid comparison failures.
-# Bugs: This is almost certainly not parallel-make safe.
+# Bugs: This is crippled when doing parallel make, the `make all-host'
+# and `make all-target' phases can be parallelized.
+
# 'touch' doesn't work right on some platforms.
STAMP = echo timestamp >
# We only want to compare .o files, so set this!
objext = .o
-# Real targets act phony if they depend on phony targets; this hack
-# prevents gratuitous rebuilding of stage 1.
-prebootstrap:
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-bootstrap
- $(STAMP) prebootstrap
-
# Flags to pass to stage2 and later makes.
-BOOT_CFLAGS= -g -O2
POSTSTAGE1_FLAGS_TO_PASS = \
CC="$${CC}" CC_FOR_BUILD="$${CC_FOR_BUILD}" \
STAGE_PREFIX=$$r/stage[+prev+]-gcc/ \
.PHONY: stage[+id+]-start stage[+id+]-end
stage[+id+]-start::
- [ -f stage_last ] && $(MAKE) `cat stage_last`-end || :
- echo stage[+id+] > stage_last ; \
- [ -d stage[+id+]-gcc ] || mkdir stage[+id+]-gcc; \
- set stage[+id+]-gcc gcc ; @CREATE_LINK_TO_DIR@ [+ IF prev +] ; \
- set stage[+prev+]-gcc prev-gcc ; @CREATE_LINK_TO_DIR@ [+ ENDIF prev +]
+ @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ echo stage[+id+] > stage_current ; \
+ echo stage[+id+] > stage_last[+ FOR host_modules +][+ IF bootstrap +]
+@if [+ module +]
+ @[ -d stage[+id+]-[+module+] ] || mkdir stage[+id+]-[+module+]; \
+ set stage[+id+]-[+module+] [+module+] ; @CREATE_LINK_TO_DIR@ [+ IF prev +] ; \
+ set stage[+prev+]-[+module+] prev-[+module+] ; @CREATE_LINK_TO_DIR@ [+ ENDIF prev +]
+@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
stage[+id+]-end::
- rm -f stage_last ; \
- set gcc stage[+id+]-gcc ; @UNDO_LINK_TO_DIR@ [+ IF prev +] ; \
- set prev-gcc stage[+prev+]-gcc ; @UNDO_LINK_TO_DIR@ [+ ENDIF prev +]
+ @rm -f stage_current[+ FOR host_modules +][+ IF bootstrap +]
+@if [+ module +]
+ @set [+module+] stage[+id+]-[+module+] ; @UNDO_LINK_TO_DIR@ [+ IF prev +] ; \
+ set prev-[+module+] stage[+prev+]-[+module+] ; @UNDO_LINK_TO_DIR@ [+ ENDIF prev +]
+@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
# Bubble a bugfix through all the stages up to stage [+id+]. They
# are remade, but not reconfigured. The next stage (if any) will not
# be reconfigured as well.
.PHONY: stage[+id+]-bubble
-stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +]
- @if [ -f all-stage[+id+]-gcc ] ; then \
- echo Remaking stage [+id+] ; \
- rm -f all-stage[+id+]-gcc ; \
- fi ; \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]-gcc
-
-[+ IF prev +]
-stage[+prev+]-bubble::
- @if [ -f configure-stage[+id+]-gcc ] ; then \
- $(STAMP) configure-stage[+id+]-gcc ; \
- fi
-[+ ENDIF prev +]
-
-configure-stage[+id+]-gcc: [+ IF prev +] all-stage[+prev+]-gcc [+
- ELSE +] prebootstrap [+ ENDIF prev +]
- $(MAKE) stage[+id+]-start
- @if [ -f stage[+id+]-gcc/Makefile ] ; then \
- $(STAMP) configure-stage[+id+]-gcc ; \
- exit 0; \
+stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +][+IF lean +]
+ @bootstrap_lean@-rm -rf stage[+lean+]-* ; $(STAMP) stage[+lean+]-lean[+ ENDIF lean +]
+ @if test -f stage[+id+]-lean [+
+ IF prev +]|| test -f stage[+prev+]-lean [+ ENDIF prev +] ; then \
+ echo Skipping rebuild of stage[+id+] ; \
else \
- true ; \
- fi ; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) NOTPARALLEL= all-stage[+id+]; \
+ fi
+
+.PHONY: all-stage[+id+] clean-stage[+id+]
+all-stage[+id+]: [+ FOR host_modules +][+ IF bootstrap +]\
+ maybe-all-stage[+id+]-[+module+][+
+ENDIF bootstrap+] [+ ENDFOR host_modules +]
+
+do-clean: clean-stage[+id+]
+clean-stage[+id+]: [+ FOR host_modules +][+ IF bootstrap +]\
+ maybe-clean-stage[+id+]-[+module+][+
+ENDIF bootstrap+] [+ ENDFOR host_modules +]
+
+[+ FOR host_modules +][+ IF bootstrap +]
+.PHONY: configure-stage[+id+]-[+module+] maybe-configure-stage[+id+]-[+module+]
+.PHONY: all-stage[+id+]-[+module+] maybe-all-stage[+id+]-[+module+]
+.PHONY: clean-stage[+id+]-[+module+] maybe-clean-stage[+id+]-[+module+]
+
+maybe-configure-stage[+id+]-[+module+]:
+maybe-all-stage[+id+]-[+module+]:
+maybe-clean-stage[+id+]-[+module+]:
+
+@if [+module+]-bootstrap
+maybe-configure-stage[+id+]-[+module+]: configure-stage[+id+]-[+module+]
+configure-stage[+id+]-[+module+]:
+ @$(MAKE) stage[+id+]-start
+ @[ -f [+module+]/Makefile ] && exit 0 || : ; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; [+ IF prev +] \
$(STAGE_HOST_EXPORTS) [+ ELSE prev +] \
$(HOST_EXPORTS) [+ ENDIF prev +] \
- echo Configuring stage [+id+] in gcc ; \
- cd gcc || exit 1; \
+ echo Configuring stage [+id+] in [+module+] ; \
+ cd [+module+] || exit 1; \
case $(srcdir) in \
\.) \
srcdiroption="--srcdir=."; \
libsrcdir=".";; \
/* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/gcc"; \
- libsrcdir="$$s/gcc";; \
+ srcdiroption="--srcdir=$(srcdir)/[+module+]"; \
+ libsrcdir="$$s/[+module+]";; \
*) \
- srcdiroption="--srcdir=../$(srcdir)/gcc"; \
- libsrcdir="$$s/gcc";; \
+ srcdiroption="--srcdir=../$(srcdir)/[+module+]"; \
+ libsrcdir="$$s/[+module+]";; \
esac; \
$(SHELL) $${libsrcdir}/configure \
$(HOST_CONFIGARGS) $${srcdiroption} \
- [+extra_configure_flags+] && \
- $(STAMP) ../configure-stage[+id+]-gcc
+ [+stage_configure_flags+] [+extra_configure_flags+]
-all-stage[+id+]-gcc: configure-stage[+id+]-gcc
- $(MAKE) stage[+id+]-start
+maybe-all-stage[+id+]-[+module+]: all-stage[+id+]-[+module+]
+all-stage[+id+]-[+module+]: configure-stage[+id+]-[+module+]
+ @$(MAKE) stage[+id+]-start
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; [+ IF prev +] \
$(STAGE_HOST_EXPORTS) [+ ELSE prev +] \
$(HOST_EXPORTS) [+ ENDIF prev +] \
- cd gcc && \
- $(MAKE) $(GCC_FLAGS_TO_PASS) [+ IF prev +] \
+ cd [+module+] && \
+ $(MAKE) $(FLAGS_TO_PASS) [+ IF prev +] \
$(POSTSTAGE1_FLAGS_TO_PASS) [+ ENDIF prev +] \
- [+extra_make_flags+] && $(STAMP) ../all-stage[+id+]-gcc
+ [+stage_make_flags+] [+extra_make_flags+]
+
+maybe-clean-stage[+id+]-[+module+]: clean-stage[+id+]-[+module+]
+clean-stage[+id+]-[+module+]:
+ @[ -f [+module+]/Makefile ] || [ -f stage[+id+]-[+module+]/Makefile ] \
+ || exit 0 ; \
+ [ -f [+module+]/Makefile ] || $(MAKE) stage[+id+]-start ; \
+ cd [+module+] && \
+ $(MAKE) $(FLAGS_TO_PASS) [+ IF prev +] \
+ $(POSTSTAGE1_FLAGS_TO_PASS) [+ ENDIF prev +] \
+ [+stage_make_flags+] [+extra_make_flags+] clean
+@endif [+module+]-bootstrap
+
+[+ ENDIF bootstrap +][+ ENDFOR host_modules +]
+# FIXME: Will not need to be conditional when toplevel bootstrap is the
+# only possibility, but now it conflicts with no-bootstrap rules
+@if gcc-bootstrap
[+ IF compare-target +]
-[+compare-target+]: all-stage[+id+]-gcc
- [ -f stage_last ] && $(MAKE) `cat stage_last`-end || :
+[+compare-target+]:
+ @if test -f stage[+prev+]-lean; then \
+ echo Cannot compare object files as stage [+prev+] was deleted. ; \
+ exit 0 ; \
+ fi; \
+ [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
rm -f .bad_compare ; \
else \
true; \
fi ; \
- $(STAMP) [+compare-target+]
+ $(STAMP) [+compare-target+][+ IF prev +]
+ @bootstrap_lean@-rm -rf stage[+prev+]-* ; $(STAMP) stage[+prev+]-lean[+ ENDIF prev +]
[+ ENDIF compare-target +]
[+ IF bootstrap-target +]
.PHONY: [+bootstrap-target+]
-[+bootstrap-target+]:
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble [+
- IF compare-target +] [+compare-target+] [+
- ENDIF compare-target +] \
- stage[+id+]-start all stage[+id+]-end
+[+bootstrap-target+]: stage[+id+]-bubble [+compare-target+] all
[+ ENDIF bootstrap-target +]
-.PHONY: restage[+id+] touch-stage[+id+] distclean-stage[+id+]
-
-# Rules to wipe a stage and all the following ones, used for cleanstrap
+# Rules to wipe a stage and all the following ones, also used for cleanstrap
[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
+.PHONY: distclean-stage[+id+]
distclean-stage[+id+]::
- [ -f stage_last ] && $(MAKE) `cat stage_last`-end || :
- rm -rf configure-stage[+id+]-gcc all-stage[+id+]-gcc stage[+id+]-gcc [+
- IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
-
-# Rules to renew the timestamp on a stage and all the following ones
-[+ IF prev +]touch-stage[+prev+]:: touch-stage[+id+] [+ ENDIF prev +]
-touch-stage[+id+]::
- @[ -f configure-stage[+id+]-gcc ] && \
- echo '$(STAMP) configure-stage[+id+]-gcc' && \
- $(STAMP) configure-stage[+id+]-gcc; \
- [ -f all-stage[+id+]-gcc ] && \
- echo '$(STAMP) all-stage[+id+]-gcc' && \
- $(STAMP) all-stage[+id+]-gcc; \
- :
-
-# After building a stage, touch the following ones
-[+ IF prev +]restage[+prev+]:: touch-stage[+id+] [+ ENDIF prev +]
-restage[+id+]::
- rm -rf all-stage[+id+]-gcc [+
+ [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ rm -rf stage[+id+]-* [+
IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) [+
- IF compare-target +][+compare-target+] [+
- ELSE +] all-stage[+id+]-gcc [+ ENDIF compare-target +]
[+ IF cleanstrap-target +]
.PHONY: [+cleanstrap-target+]
-[+cleanstrap-target+]: distclean-stage1 [+bootstrap-target+]
+[+cleanstrap-target+]: distclean [+bootstrap-target+]
[+ ENDIF cleanstrap-target +]
+@endif gcc-bootstrap
[+ ENDFOR bootstrap-stage +]
{ find . -type d | sort | sed 's,.*,$(SHELL) '"$$s"'/mkinstalldirs "../gcc/&",' | $(SHELL); } && \
{ find . -name '*.*da' | sed 's,.*,$(LN) -f "&" "../gcc/&",' | $(SHELL); }
-profiledbootstrap: all-bootstrap configure-gcc
+# FIXME: Will not need to be conditional when toplevel bootstrap is the
+# only possibility, but now it conflicts with no-bootstrap rules
+@if gcc-bootstrap
+profiledbootstrap:
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
echo "Bootstrapping the compiler"; \
- $(MAKE) stageprofile-bubble distclean-stagefeedback stageprofile-start
+ $(MAKE) stageprofile-bubble distclean-stagefeedback
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
$(SET_LIB_PATH) \
$(HOST_EXPORTS) \
echo "Building feedback based compiler"; \
$(MAKE) stagefeedback-bubble stagefeedback-end
+@endif gcc-bootstrap
+@if gcc-bootstrap
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+do-distclean: distclean-stage1
@endif gcc-bootstrap
# --------------------------------------
# Dependencies between different modules
# --------------------------------------
+# Generic dependencies for target modules on host stuff, especially gcc
+[+ FOR target_modules +]
+configure-target-[+module+]: maybe-all-gcc
+[+ ENDFOR target_modules +]
+
+[+ FOR lang_env_dependencies +]
+configure-target-[+module+]: maybe-all-target-newlib maybe-all-target-libgloss
+[+ IF cxx +]configure-target-[+module+]: maybe-all-target-libstdc++-v3
+[+ ENDIF cxx +][+ ENDFOR lang_env_dependencies +]
+
# There are two types of dependencies here: 'hard' dependencies, where one
# module simply won't build without the other; and 'soft' dependencies, where
# if the depended-on module is missing, the depending module will do without
# or find a substitute somewhere (perhaps installed). Soft dependencies
-# are specified by depending on a 'maybe-' target. If you're not sure,
+# are made here to depend on a 'maybe-' target. If you're not sure,
# it's safer to use a soft dependency.
-# Build modules
-all-build-bison: maybe-all-build-texinfo
-all-build-flex: maybe-all-build-texinfo
-all-build-libiberty: maybe-all-build-texinfo
-all-build-m4: maybe-all-build-libiberty maybe-all-build-texinfo
-
-# Host modules specific to gcc.
-# GCC needs to identify certain tools.
-# GCC also needs the information exported by the intl configure script.
-configure-gcc: maybe-configure-intl maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex
-all-gcc: maybe-all-libiberty maybe-all-intl maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib maybe-all-libbanshee maybe-all-libcpp
-configure-libcpp: maybe-configure-libiberty maybe-configure-intl
-all-libcpp: maybe-all-libiberty maybe-all-intl
-# This is a slightly kludgy method of getting dependencies on
-# all-build-libiberty correct; it would be better to build it every time.
-all-gcc: maybe-all-build-libiberty
-all-bootstrap: [+ FOR host_modules +][+ IF bootstrap +]maybe-all-[+module+] [+ ENDIF bootstrap +][+ ENDFOR host_modules +]
-
-# Host modules specific to gdb.
-# GDB needs to know that the simulator is being built.
-configure-gdb: maybe-configure-itcl maybe-configure-tcl maybe-configure-tk maybe-configure-sim
+[+ ;; These Scheme functions build the bulk of the dependencies.
+ ;; dep-target builds a string like "maybe-all-MODULE_KIND-gcc",
+ ;; where "maybe-" is only included if HARD is true, and all-gcc
+ ;; is taken from VAR-NAME.
+ (define dep-target (lambda (module-kind var-name hard)
+ (string-append
+ (if hard "" "maybe-")
+ (dep-subtarget var-name)
+ module-kind
+ (dep-module var-name)
+ )))
+
+ ;; make-dep builds a dependency from the MODULE and ON AutoGen vars.
+ (define make-dep (lambda (module-kind on-kind)
+ (string-append
+ (dep-target module-kind "module" #t) ": "
+ (dep-target on-kind "on" (exist? "hard")))))
+
+ ;; dep-subtarget extracts everything up to the first dash in the given
+ ;; AutoGen variable, for example it extracts "all-" out of "all-gcc".
+ (define dep-subtarget (lambda (var-name)
+ (substring (get var-name) 0 (+ 1 (string-index (get var-name) #\-)))))
+
+ ;; dep-module extracts everything up to the first dash in the given
+ ;; AutoGen variable, for example it extracts "gcc" out of "all-gcc".
+ (define dep-module (lambda (var-name)
+ (substring (get var-name) (+ 1 (string-index (get var-name) #\-)))))
+
+ ;; dep-stage builds a string for the prefix of a bootstrap stage.
+ (define dep-stage (lambda ()
+ (string-append
+ "stage"
+ (get "id")
+ "-")))
+
+ ;; dep-maybe is the same as the AutoGen expression "- hard 'maybe-'"
+ ;; but is written in Scheme.
+ (define dep-maybe (lambda ()
+ (if (exist? "hard") "" "maybe-")))
+
+ ;; dep-kind returns "normal" if the dependency is on an "install" target,
+ ;; or if either module is not bootstrapped. It returns "bootstrap" for
+ ;; configure or build dependencies between bootstrapped modules; it returns
+ ;; "prebootstrap" for configure or build dependencies of bootstrapped
+ ;; modules on a build module (e.g. all-gcc on all-build-bison). All this
+ ;; is only necessary for host modules.
+ (define dep-kind (lambda ()
+ (if (and (hash-ref boot-modules (dep-module "module"))
+ (=* (dep-module "on") "build-"))
+ "prebootstrap"
+
+ (if (or (= (dep-subtarget "on") "install-")
+ (=* (dep-module "on") "target-")
+ (not (hash-ref boot-modules (dep-module "module")))
+ (not (hash-ref boot-modules (dep-module "on"))))
+ "normal"
+ "bootstrap"))))
+
+ ;; We now build the hash table that is used by dep-kind.
+ (define boot-modules (make-hash-table 113))
++]
+
+[+ FOR host_modules +][+
+ (if (exist? "bootstrap")
+ (hash-create-handle! boot-modules (get "module") #t))
+ "" +][+ ENDFOR host_modules +]
+
+# With all the machinery above in place, it is pretty easy to generate
+# dependencies. Host dependencies are a bit more complex because we have
+# to check for bootstrap/prebootstrap dependencies. To resolve
+# prebootstrap dependencies, prebootstrap modules are gathered in
+# a hash table.
+[+ FOR dependencies +][+ (make-dep "" "") +]
+[+ CASE (dep-kind) +]
+[+ == "prebootstrap"
+ +][+ FOR bootstrap_stage +]
+[+ (make-dep (dep-stage) "") +][+
+ ENDFOR bootstrap_stage +]
+all-prebootstrap: [+ (dep-target "" "on" (exist? "hard")) +]
+[+ == "bootstrap"
+ +][+ FOR bootstrap_stage +]
+[+ (make-dep (dep-stage) (dep-stage)) +][+
+ ENDFOR bootstrap_stage +]
+[+ ESAC +][+
+ENDFOR dependencies +]
+
+# Non-toplevel bootstrap rules must depend on several packages, to be built
+# before gcc. Another wart that will go away, hopefully soon.
+@if gcc-no-bootstrap
+[+ FOR host_modules +][+
+ IF (and (not (= (get "module") "gcc"))
+ (hash-ref boot-modules (get "module"))) +]
+all-prebootstrap: maybe-all-[+module+][+
+ ENDIF +][+
+ENDFOR host_modules +]
+@endif gcc-no-bootstrap
+
GDB_TK = @GDB_TK@
-all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK)
-install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui
-configure-libgui: maybe-configure-tcl maybe-configure-tk
-all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl
-
-# Host modules specific to binutils.
-configure-bfd: configure-libiberty
-all-bfd: maybe-all-libiberty maybe-all-intl
-all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex maybe-all-bison maybe-all-byacc maybe-all-intl
-# We put install-opcodes before install-binutils because the installed
-# binutils might be on PATH, and they might need the shared opcodes
-# library.
-install-binutils: maybe-install-opcodes
-# libopcodes depends on libbfd
-install-opcodes: maybe-install-bfd
-all-gas: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-intl
-all-gprof: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-intl
-all-ld: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-bison maybe-all-byacc maybe-all-flex maybe-all-intl
-all-opcodes: maybe-all-bfd maybe-all-libiberty
-
-# Other host modules in the 'src' repository.
-all-dejagnu: maybe-all-tcl maybe-all-expect maybe-all-tk
-configure-expect: maybe-configure-tcl maybe-configure-tk
-all-expect: maybe-all-tcl maybe-all-tk
-configure-itcl: maybe-configure-tcl maybe-configure-tk
-all-itcl: maybe-all-tcl maybe-all-tk
-# We put install-tcl before install-itcl because itcl wants to run a
-# program on installation which uses the Tcl libraries.
-install-itcl: maybe-install-tcl
-all-sid: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-tcl maybe-all-tk
-install-sid: maybe-install-tcl maybe-install-tk
-all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline maybe-configure-gdb
-configure-tk: maybe-configure-tcl
-all-tk: maybe-all-tcl
-configure-tix: maybe-configure-tcl maybe-configure-tk
-all-tix: maybe-all-tcl maybe-all-tk
-all-texinfo: maybe-all-libiberty
-
-# Other host modules. Warning, these are not well tested.
-all-autoconf: maybe-all-m4 maybe-all-texinfo
-all-automake: maybe-all-m4 maybe-all-texinfo
-all-bison: maybe-all-texinfo
-all-diff: maybe-all-libiberty
-all-fastjar: maybe-all-zlib maybe-all-libiberty
-all-fileutils: maybe-all-libiberty
-all-flex: maybe-all-libiberty maybe-all-bison maybe-all-byacc
-all-gzip: maybe-all-libiberty
-all-hello: maybe-all-libiberty
-all-m4: maybe-all-libiberty maybe-all-texinfo
-all-make: maybe-all-libiberty maybe-all-intl
-all-patch: maybe-all-libiberty
-all-prms: maybe-all-libiberty
-all-recode: maybe-all-libiberty
-all-sed: maybe-all-libiberty
-all-send-pr: maybe-all-prms
-all-tar: maybe-all-libiberty
-all-uudecode: maybe-all-libiberty
-
-ALL_GCC = maybe-all-gcc
-ALL_GCC_C = $(ALL_GCC) maybe-all-target-newlib maybe-all-target-libgloss
-ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
-
-# Target modules specific to gcc.
-configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
-configure-target-fastjar: maybe-configure-target-zlib
-all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
-configure-target-libada: $(ALL_GCC_C)
-configure-target-libgfortran: $(ALL_GCC_C)
-configure-target-libffi: $(ALL_GCC_C)
-configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
-all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
-configure-target-libobjc: $(ALL_GCC_C)
-all-target-libobjc: maybe-all-target-libiberty
-configure-target-libstdc++-v3: $(ALL_GCC_C)
-all-target-libstdc++-v3: maybe-all-target-libiberty
-configure-target-zlib: $(ALL_GCC_C)
-
-# Target modules in the 'src' repository.
-configure-target-examples: $(ALL_GCC_C)
-configure-target-libgloss: $(ALL_GCC)
-all-target-libgloss: maybe-configure-target-newlib
-configure-target-libiberty: $(ALL_GCC)
-configure-target-libtermcap: $(ALL_GCC_C)
-configure-target-newlib: $(ALL_GCC)
-configure-target-rda: $(ALL_GCC_C)
-configure-target-winsup: $(ALL_GCC_C)
-all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap
-
-# Other target modules. Warning, these are not well tested.
-configure-target-gperf: $(ALL_GCC_CXX)
-all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
-configure-target-qthreads: $(ALL_GCC_C)
+all-gdb: $(gdbnlmrequirements) $(GDB_TK)
# Serialization dependencies. Host configures don't work well in parallel to
# each other, due to contention over config.cache. Target configures and