@SET_MAKE@
#
-# Copyright (C) 2012-2018 Free Software Foundation, Inc.
+# Copyright (C) 2012-2022 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
+ $(top_srcdir)/../config/bfd64.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
+ $(top_srcdir)/../config/jobserver.m4 \
$(top_srcdir)/../config/largefile.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/plugins.m4 \
$(top_srcdir)/../config/po.m4 \
$(top_srcdir)/../config/progtest.m4 \
- $(top_srcdir)/../config/stdint.m4 \
$(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
-am__installdirs = "$(DESTDIR)$(bfdlibdir)" \
+am__installdirs = "$(DESTDIR)$(bfdlibdir)" "$(DESTDIR)$(infodir)" \
"$(DESTDIR)$(bfdincludedir)"
LTLIBRARIES = $(bfdlib_LTLIBRARIES) $(noinst_LTLIBRARIES)
am__DEPENDENCIES_1 =
am__v_CCLD_1 =
SOURCES = $(libbfd_a_SOURCES) $(libbfd_la_SOURCES) \
$(EXTRA_libbfd_la_SOURCES)
+AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
+am__v_DVIPS_0 = @echo " DVIPS " $@;
+am__v_DVIPS_1 =
+AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
+am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
+am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
+am__v_MAKEINFO_1 =
+AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
+am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
+am__v_INFOHTML_0 = @echo " INFOHTML" $@;
+am__v_INFOHTML_1 =
+AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
+am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
+am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
+am__v_TEXI2DVI_1 =
+AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
+am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
+am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
+am__v_TEXI2PDF_1 =
+AM_V_texinfo = $(am__v_texinfo_@AM_V@)
+am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
+am__v_texinfo_0 = -q
+am__v_texinfo_1 =
+AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
+am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
+am__v_texidevnull_0 = > /dev/null
+am__v_texidevnull_1 =
+am__dirstamp = $(am__leading_dot)dirstamp
+INFO_DEPS = doc/bfd.info
+am__TEXINFO_TEX_DIR = $(srcdir)
+DVIS = doc/bfd.dvi
+PDFS = doc/bfd.pdf
+PSS = doc/bfd.ps
+HTMLS = doc/bfd.html
+TEXINFOS = doc/bfd.texi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__bfdinclude_HEADERS_DIST = $(INCDIR)/plugin-api.h bfd.h \
- $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h $(INCDIR)/bfdlink.h \
- $(INCDIR)/diagnostics.h
+ $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h \
+ $(INCDIR)/diagnostics.h $(INCDIR)/bfdlink.h
HEADERS = $(bfdinclude_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
+LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBINTL = @LIBINTL@
wordsize = @wordsize@
zlibdir = @zlibdir@
zlibinc = @zlibinc@
-AUTOMAKE_OPTIONS = no-dist foreign
+AUTOMAKE_OPTIONS = no-dist foreign info-in-builddir no-texinfo.tex
ACLOCAL_AMFLAGS = -I . -I .. -I ../config
+MOSTLYCLEANFILES = ofiles stamp-ofiles $(MKDOC) doc/*.o doc/*.stamp
+CLEANFILES = bfd.h dep.sed stmp-bfd-h DEP DEPA DEP1 DEP2 libbfd.a \
+ stamp-lib stmp-bin2-h stmp-lbfd-h stmp-lcoff-h
+DISTCLEANFILES = $(BUILD_CFILES) $(BUILD_HFILES) libtool-soversion \
+ doc/bfd.?? doc/bfd.??? texput.log
+MAINTAINERCLEANFILES = $(DOCFILES) doc/bfd.info
INCDIR = $(srcdir)/../include
CSEARCH = -I. -I$(srcdir) -I$(INCDIR)
-SUBDIRS = doc po
+SUBDIRS = po
bfddocdir = doc
libbfd_la_LDFLAGS = $(am__append_1) -release `cat libtool-soversion` \
@SHARED_LDFLAGS@ $(am__empty)
@INSTALL_LIBBFD_FALSE@bfdinclude_HEADERS = $(am__append_2)
@INSTALL_LIBBFD_TRUE@bfdinclude_HEADERS = $(BFD_H) \
@INSTALL_LIBBFD_TRUE@ $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h \
-@INSTALL_LIBBFD_TRUE@ $(INCDIR)/bfdlink.h \
-@INSTALL_LIBBFD_TRUE@ $(INCDIR)/diagnostics.h $(am__append_2)
+@INSTALL_LIBBFD_TRUE@ $(INCDIR)/diagnostics.h \
+@INSTALL_LIBBFD_TRUE@ $(INCDIR)/bfdlink.h $(am__append_2)
@INSTALL_LIBBFD_FALSE@rpath_bfdlibdir = @bfdlibdir@
@INSTALL_LIBBFD_FALSE@noinst_LTLIBRARIES = libbfd.la
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
-AM_CPPFLAGS = -DBINDIR='"$(bindir)"' @HDEFINES@ @COREFLAG@ @TDEFINES@ \
+AM_CPPFLAGS = -DBINDIR='"$(bindir)"' -DLIBDIR='"$(libdir)"' \
+ @LARGEFILE_CPPFLAGS@ @HDEFINES@ @COREFLAG@ @TDEFINES@ \
$(CSEARCH) $(CSWITCHES) $(HAVEVECS) @INCINTL@
@PLUGINS_TRUE@LIBDL = @lt_cv_dlopen_libs@
ALL_MACHINES = \
cpu-aarch64.lo \
cpu-alpha.lo \
+ cpu-amdgcn.lo \
cpu-arc.lo \
cpu-arm.lo \
cpu-avr.lo \
cpu-bfin.lo \
+ cpu-bpf.lo \
cpu-cr16.lo \
- cpu-cr16c.lo \
cpu-cris.lo \
cpu-crx.lo \
cpu-csky.lo \
cpu-hppa.lo \
cpu-i386.lo \
cpu-iamcu.lo \
- cpu-l1om.lo \
- cpu-k1om.lo \
cpu-ia64.lo \
cpu-ip2k.lo \
cpu-iq2000.lo \
cpu-lm32.lo \
+ cpu-loongarch.lo \
cpu-m10200.lo \
cpu-m10300.lo \
cpu-m32c.lo \
cpu-or1k.lo \
cpu-pdp11.lo \
cpu-pj.lo \
- cpu-plugin.lo \
cpu-powerpc.lo \
cpu-pru.lo \
cpu-rs6000.lo \
cpu-tic4x.lo \
cpu-tic54x.lo \
cpu-tic6x.lo \
- cpu-tic80.lo \
cpu-tilegx.lo \
cpu-tilepro.lo \
cpu-v850.lo \
ALL_MACHINES_CFILES = \
cpu-aarch64.c \
cpu-alpha.c \
+ cpu-amdgcn.c \
cpu-arc.c \
cpu-arm.c \
cpu-avr.c \
cpu-bfin.c \
+ cpu-bpf.c \
cpu-cr16.c \
- cpu-cr16c.c \
cpu-cris.c \
cpu-crx.c \
cpu-csky.c \
cpu-hppa.c \
cpu-i386.c \
cpu-iamcu.c \
- cpu-l1om.c \
- cpu-k1om.c \
cpu-ia64.c \
cpu-ip2k.c \
cpu-iq2000.c \
cpu-lm32.c \
+ cpu-loongarch.c \
cpu-m10200.c \
cpu-m10300.c \
cpu-m32c.c \
cpu-or1k.c \
cpu-pdp11.c \
cpu-pj.c \
- cpu-plugin.c \
cpu-powerpc.c \
cpu-pru.c \
cpu-rs6000.c \
cpu-tic4x.c \
cpu-tic54x.c \
cpu-tic6x.c \
- cpu-tic80.c \
cpu-tilegx.c \
cpu-tilepro.c \
cpu-v850.c \
BFD32_BACKENDS = \
aout-cris.lo \
aout-ns32k.lo \
- aout-tic30.lo \
aout32.lo \
cf-i386lynx.lo \
coff-go32.lo \
coff-tic30.lo \
coff-tic4x.lo \
coff-tic54x.lo \
- coff-tic80.lo \
coff-z80.lo \
coff-z8k.lo \
coffgen.lo \
elf32-avr.lo \
elf32-bfin.lo \
elf32-cr16.lo \
- elf32-cr16c.lo \
elf32-cris.lo \
elf32-crx.lo \
elf32-csky.lo \
elf32-xgate.lo \
elf32-xstormy16.lo \
elf32-xtensa.lo \
+ elf32-z80.lo \
elf32.lo \
elflink.lo \
elfxx-sparc.lo \
pe-arm.lo \
pe-i386.lo \
pe-mcore.lo \
- pe-ppc.lo \
pe-sh.lo \
pef.lo \
pei-arm-wince.lo \
pei-arm.lo \
pei-i386.lo \
pei-mcore.lo \
- pei-ppc.lo \
pei-sh.lo \
peigen.lo \
plugin.lo \
BFD32_BACKENDS_CFILES = \
aout-cris.c \
aout-ns32k.c \
- aout-tic30.c \
aout32.c \
cf-i386lynx.c \
coff-go32.c \
coff-tic30.c \
coff-tic4x.c \
coff-tic54x.c \
- coff-tic80.c \
coff-z80.c \
coff-z8k.c \
coffgen.c \
elf32-avr.c \
elf32-bfin.c \
elf32-cr16.c \
- elf32-cr16c.c \
elf32-cris.c \
elf32-crx.c \
elf32-csky.c \
elf32-xgate.c \
elf32-xstormy16.c \
elf32-xtensa.c \
+ elf32-z80.c \
elf32.c \
elflink.c \
elfxx-sparc.c \
pe-arm.c \
pe-i386.c \
pe-mcore.c \
- pe-ppc.c \
pe-sh.c \
pef.c \
pei-arm-wince.c \
pei-arm.c \
pei-i386.c \
pei-mcore.c \
- pei-ppc.c \
pei-sh.c \
plugin.c \
ppcboot.c \
elf32-score.lo \
elf32-score7.lo \
elf64-alpha.lo \
+ elf64-amdgcn.lo \
elf64-gen.lo \
elf64-hppa.lo \
elf64-ia64.lo \
elf64-ia64-vms.lo \
elfxx-ia64.lo \
+ elf32-loongarch.lo \
+ elf64-loongarch.lo \
+ elfxx-loongarch.lo \
elfn32-mips.lo \
elf64-mips.lo \
elfxx-mips.lo \
elf64-tilegx.lo \
elf64-x86-64.lo \
elfxx-x86.lo \
+ elf64-bpf.lo \
elf64.lo \
mach-o-aarch64.lo \
mach-o-x86-64.lo \
mmo.lo \
+ pe-aarch64igen.lo \
pe-x86_64.lo \
+ pei-aarch64.lo \
pei-ia64.lo \
pei-x86_64.lo \
pepigen.lo \
elf32-score.c \
elf32-score7.c \
elf64-alpha.c \
+ elf64-amdgcn.c \
elf64-gen.c \
elf64-hppa.c \
elf64-ia64-vms.c \
elf64-tilegx.c \
elf64-x86-64.c \
elfxx-x86.c \
+ elf64-bpf.c \
elf64.c \
elfn32-mips.c \
elfxx-aarch64.c \
elfxx-ia64.c \
+ elfxx-loongarch.c \
elfxx-mips.c \
elfxx-riscv.c \
mach-o-aarch64.c \
mach-o-x86-64.c \
mmo.c \
pe-x86_64.c \
+ pei-aarch64.c \
pei-ia64.c \
pei-x86_64.c \
vms-alpha.c
BUILD_CFILES = \
elf32-aarch64.c elf64-aarch64.c \
elf32-ia64.c elf64-ia64.c \
+ elf32-loongarch.c elf64-loongarch.c \
elf32-riscv.c elf64-riscv.c \
- peigen.c pepigen.c pex64igen.c
+ peigen.c pepigen.c pex64igen.c pe-aarch64igen.c
CFILES = $(SOURCE_CFILES) $(BUILD_CFILES)
SOURCE_HFILES = \
- aout-target.h aoutx.h coffcode.h coffswap.h ecoffswap.h \
- elf-bfd.h elf-hppa.h elf-linux-core.h elf32-hppa.h \
- elf64-hppa.h elfcode.h elfcore.h \
+ aout-target.h aoutx.h arc-got.h arc-plt.h \
+ coff-arm.h coff-bfd.h coffcode.h coffswap.h \
+ cpu-aarch64.h cpu-arm.h cpu-h8300.h cpu-m68k.h cpu-riscv.h \
+ ecoff-bfd.h ecoffswap.h \
+ elf32-arm.h elf32-avr.h elf32-bfin.h elf32-cr16.h elf32-csky.h \
+ elf32-dlx.h elf32-hppa.h elf32-m68hc1x.h elf32-m68k.h \
+ elf32-metag.h elf32-nds32.h elf32-nios2.h elf32-ppc.h \
+ elf32-rx.h elf32-score.h elf32-sh-relocs.h elf32-spu.h \
+ elf32-tic6x.h elf32-tilegx.h elf32-tilepro.h elf32-v850.h \
+ elf64-hppa.h elf64-ppc.h elf64-tilegx.h \
+ elf-bfd.h elfcode.h elfcore.h elf-hppa.h elf-linker-x86.h \
+ elf-linux-core.h elf-nacl.h elf-s390.h elf-vxworks.h \
+ elfxx-aarch64.h elfxx-ia64.h elfxx-mips.h elfxx-riscv.h \
+ elfxx-sparc.h elfxx-tilegx.h elfxx-x86.h elfxx-loongarch.h \
genlink.h go32stub.h \
libaout.h libbfd.h libcoff.h libecoff.h libhppa.h \
- libpei.h libxcoff.h mach-o.h \
+ libpei.h libxcoff.h \
+ mach-o.h \
netbsd.h ns32k.h \
- pef.h pef-traceback.h peicode.h som.h version.h \
- vms.h xsym.h
+ pef.h pef-traceback.h peicode.h plugin.h \
+ som.h sysdep.h \
+ version.h vms.h \
+ wasm-module.h \
+ xcofflink.h xsym.h
BUILD_HFILES = \
- bfdver.h elf32-target.h elf64-target.h targmatch.h bfd_stdint.h
+ bfdver.h elf32-target.h elf64-target.h targmatch.h
# Ensure they are built early:
BUILT_SOURCES = $(BUILD_HFILES)
HFILES = $(SOURCE_HFILES) $(BUILD_HFILES)
+BFD_H_DEPS = $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h $(INCDIR)/diagnostics.h
+LOCAL_H_DEPS = libbfd.h sysdep.h config.h
SRC_POTFILES = $(SOURCE_CFILES) $(SOURCE_HFILES)
BLD_POTFILES = $(BUILD_CFILES) $(BUILD_HFILES)
# everything else starts using libtool. FIXME.
noinst_LIBRARIES = libbfd.a
libbfd_a_SOURCES =
-BFD_H_DEPS = $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h
-LOCAL_H_DEPS = libbfd.h sysdep.h config.h
BFD_H_FILES = bfd-in.h init.c opncls.c libbfd.c \
bfdio.c bfdwin.c section.c archures.c reloc.c \
syms.c bfd.c archive.c corefile.c targets.c format.c \
cache.c reloc.c archures.c linker.c
LIBCOFF_H_FILES = libcoff-in.h coffcode.h
-MOSTLYCLEANFILES = ofiles stamp-ofiles
-CLEANFILES = bfd.h dep.sed stmp-bfd-h DEP DEPA DEP1 DEP2 libbfd.a stamp-lib \
- stmp-bin2-h stmp-lbfd-h stmp-lcoff-h
-DISTCLEANFILES = $(BUILD_CFILES) $(BUILD_HFILES) libtool-soversion
+# We only rebuild the header files automatically if we have been
+# configured with --enable-maintainer-mode.
+REGEN_HEADER = \
+ ( \
+ set -e; \
+ echo "$$H_FILES" | sed -f $(srcdir)/doc/header.sed; \
+ for file in $$H_FILES; do \
+ file="$(srcdir)/$$file"; \
+ case $$file in \
+ *-in.h) cat $$file;; \
+ *) echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
+ -e 's,$$,. */,'; \
+ $(MKDOC) $$CHEW_FLAGS -f $(srcdir)/doc/proto.str < $$file;; \
+ esac; \
+ done; \
+ echo "\#ifdef __cplusplus"; \
+ echo "}"; \
+ echo "\#endif"; \
+ echo "\#endif"; \
+ )
+
+DOCFILES = \
+ doc/aoutx.texi \
+ doc/archive.texi \
+ doc/archures.texi \
+ doc/bfdio.texi \
+ doc/bfdt.texi \
+ doc/bfdver.texi \
+ doc/bfdwin.texi \
+ doc/cache.texi \
+ doc/coffcode.texi \
+ doc/corefile.texi \
+ doc/elfcode.texi \
+ doc/elf.texi \
+ doc/format.texi \
+ doc/hash.texi \
+ doc/init.texi \
+ doc/libbfd.texi \
+ doc/linker.texi \
+ doc/mmo.texi \
+ doc/opncls.texi \
+ doc/reloc.texi \
+ doc/section.texi \
+ doc/syms.texi \
+ doc/targets.texi
+
+
+# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction
+# between VPATH and suffix rules. If you use GNU Make, perhaps other Makes,
+# you don't need these three:
+SRCDOC = \
+ $(srcdir)/aoutx.h $(srcdir)/archive.c \
+ $(srcdir)/archures.c $(srcdir)/bfd.c \
+ $(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
+ $(srcdir)/cache.c $(srcdir)/coffcode.h \
+ $(srcdir)/corefile.c $(srcdir)/elf.c \
+ $(srcdir)/elfcode.h $(srcdir)/format.c \
+ $(srcdir)/libbfd.c $(srcdir)/opncls.c \
+ $(srcdir)/reloc.c $(srcdir)/section.c \
+ $(srcdir)/syms.c $(srcdir)/targets.c \
+ $(srcdir)/hash.c $(srcdir)/linker.c \
+ $(srcdir)/mmo.c
+
+SRCPROT = $(srcdir)/archive.c $(srcdir)/archures.c \
+ $(srcdir)/bfd.c $(srcdir)/coffcode.h $(srcdir)/corefile.c \
+ $(srcdir)/format.c $(srcdir)/libbfd.c \
+ $(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
+ $(srcdir)/opncls.c $(srcdir)/reloc.c \
+ $(srcdir)/section.c $(srcdir)/syms.c \
+ $(srcdir)/targets.c $(srcdir)/init.c
+
+SRCIPROT = $(srcdir)/cache.c $(srcdir)/libbfd.c \
+ $(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
+ $(srcdir)/reloc.c $(srcdir)/cpu-h8300.c \
+ $(srcdir)/cpu-i960.c $(srcdir)/archures.c \
+ $(srcdir)/init.c
+
+TEXIDIR = $(srcdir)/../texinfo/fsf
+info_TEXINFOS = doc/bfd.texi
+doc_bfd_TEXINFOS = $(DOCFILES) doc/bfdsumm.texi
+AM_MAKEINFOFLAGS = --no-split -I "$(srcdir)/doc" -I doc
+TEXI2DVI = texi2dvi -I "$(srcdir)/doc" -I doc
+MKDOC = doc/chew$(EXEEXT_FOR_BUILD)
+
+# We can't replace these rules with an implicit rule, because
+# makes without VPATH support couldn't find the .h files in `..'.
+
+# We do not depend on chew directly so that we can distribute the info
+# files, and permit people to rebuild them, without requiring the makeinfo
+# program. If somebody tries to rebuild info, but none of the .texi files
+# have changed, then nothing will be rebuilt.
+REGEN_TEXI = \
+ ( \
+ set -e; \
+ $(MKDOC) -f $(srcdir)/doc/doc.str < $< > $@.tmp; \
+ texi=$@; \
+ texi=$${texi%.stamp}.texi; \
+ test -e $$texi || test ! -f $(srcdir)/$$texi || $(LN_S) $(srcdir)/$$texi .; \
+ $(SHELL) $(srcdir)/../move-if-change $@.tmp $$texi; \
+ touch $@; \
+ )
+
+noinst_TEXINFOS = doc/bfdint.texi
all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
+.SUFFIXES: .c .dvi .lo .o .obj .ps
am--refresh: Makefile
@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/doc/local.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
+$(srcdir)/doc/local.mk $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aix5ppc-core.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout-cris.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout-ns32k.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout-tic30.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout32.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/archive.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-tic30.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-tic4x.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-tic54x.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-tic80.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-x86_64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-z80.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-z8k.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/corefile.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-aarch64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-alpha.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-amdgcn.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-arc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-arm.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-avr.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-bfin.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-bpf.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-cr16.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-cr16c.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-cris.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-crx.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-csky.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-iamcu.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-ip2k.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-iq2000.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-k1om.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-l1om.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-lm32.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-loongarch.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-m10200.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-m10300.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-m32c.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-or1k.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-pdp11.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-pj.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-plugin.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-powerpc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-pru.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-riscv.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-tic4x.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-tic54x.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-tic6x.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-tic80.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-tilegx.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-tilepro.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-v850.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-avr.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-bfin.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-cr16.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-cr16c.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-cris.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-crx.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-csky.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-ip2k.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-iq2000.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-lm32.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-loongarch.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-m32c.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-m32r.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-m68hc11.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-xgate.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-xstormy16.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-xtensa.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-z80.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-aarch64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-alpha.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-amdgcn.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-bpf.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-gen.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-hppa.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-ia64-vms.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-ia64.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-loongarch.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-mips.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-mmix.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf64-nfp.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elfn32-mips.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elfxx-aarch64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elfxx-ia64.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elfxx-loongarch.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elfxx-mips.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elfxx-riscv.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elfxx-sparc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/osf-core.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pc532-mach.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pdp11.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-aarch64igen.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-arm-wince.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-arm.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-i386.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-mcore.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-ppc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-sh.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-x86_64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pef.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-aarch64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-arm-wince.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-arm.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-i386.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-ia64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-mcore.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-ppc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-sh.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-x86_64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/peigen.Plo@am__quote@
distclean-libtool:
-rm -f libtool config.lt
+doc/$(am__dirstamp):
+ @$(MKDIR_P) doc
+ @: > doc/$(am__dirstamp)
+
+doc/bfd.info: doc/bfd.texi $(doc_bfd_TEXINFOS)
+ @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
+ $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+ rm -rf $$backupdir && mkdir $$backupdir && \
+ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+ done; \
+ else :; fi && \
+ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
+ -o $@ `test -f 'doc/bfd.texi' || echo '$(srcdir)/'`doc/bfd.texi; \
+ then \
+ rc=0; \
+ else \
+ rc=$$?; \
+ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+ fi; \
+ rm -rf $$backupdir; exit $$rc
+
+doc/bfd.dvi: doc/bfd.texi $(doc_bfd_TEXINFOS) doc/$(am__dirstamp)
+ $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
+ $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+ `test -f 'doc/bfd.texi' || echo '$(srcdir)/'`doc/bfd.texi
+
+doc/bfd.pdf: doc/bfd.texi $(doc_bfd_TEXINFOS) doc/$(am__dirstamp)
+ $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
+ $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+ `test -f 'doc/bfd.texi' || echo '$(srcdir)/'`doc/bfd.texi
+
+doc/bfd.html: doc/bfd.texi $(doc_bfd_TEXINFOS) doc/$(am__dirstamp)
+ $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+ $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
+ -o $(@:.html=.htp) `test -f 'doc/bfd.texi' || echo '$(srcdir)/'`doc/bfd.texi; \
+ then \
+ rm -rf $@ && mv $(@:.html=.htp) $@; \
+ else \
+ rm -rf $(@:.html=.htp); exit 1; \
+ fi
+.dvi.ps:
+ $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(DVIPS) $(AM_V_texinfo) -o $@ $<
+
+uninstall-dvi-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+ rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+ done
+
+uninstall-html-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+ done
+
+uninstall-info-am:
+ @$(PRE_UNINSTALL)
+ @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+ done; \
+ else :; fi
+ @$(NORMAL_UNINSTALL)
+ @list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+ else :; fi); \
+ done
+
+uninstall-pdf-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+uninstall-ps-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(psdir)/$$f"; \
+ done
+
+dist-info: $(INFO_DEPS)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; \
+ for base in $$list; do \
+ case $$base in \
+ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+ if test -f $$file; then \
+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+ test -f "$(distdir)/$$relfile" || \
+ cp -p $$file "$(distdir)/$$relfile"; \
+ else :; fi; \
+ done; \
+ done
+
+mostlyclean-aminfo:
+ -rm -rf doc/bfd.t2d doc/bfd.t2p
+
+clean-aminfo:
+ -test -z "doc/bfd.dvi doc/bfd.pdf doc/bfd.ps doc/bfd.html" \
+ || rm -rf doc/bfd.dvi doc/bfd.pdf doc/bfd.ps doc/bfd.html
+
+maintainer-clean-aminfo:
+ @list='$(INFO_DEPS)'; for i in $$list; do \
+ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+ done
install-bfdincludeHEADERS: $(bfdinclude_HEADERS)
@$(NORMAL_INSTALL)
@list='$(bfdinclude_HEADERS)'; test -n "$(bfdincludedir)" || list=; \
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(HEADERS) config.h
+all-am: Makefile $(INFO_DEPS) $(LIBRARIES) $(LTLIBRARIES) $(HEADERS) \
+ config.h
installdirs: installdirs-recursive
installdirs-am:
- for dir in "$(DESTDIR)$(bfdlibdir)" "$(DESTDIR)$(bfdincludedir)"; do \
+ for dir in "$(DESTDIR)$(bfdlibdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(bfdincludedir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -rm -f doc/$(am__dirstamp)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
-clean-am: clean-bfdlibLTLIBRARIES clean-generic clean-libtool \
- clean-noinstLIBRARIES clean-noinstLTLIBRARIES mostlyclean-am
+clean-am: clean-aminfo clean-bfdlibLTLIBRARIES clean-generic \
+ clean-libtool clean-noinstLIBRARIES clean-noinstLTLIBRARIES \
+ mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
dvi: dvi-recursive
-dvi-am:
+dvi-am: $(DVIS)
html: html-recursive
-html-am:
+html-am: $(HTMLS) html-local
info: info-recursive
-info-am:
+info-am: $(INFO_DEPS)
-install-data-am: install-bfdincludeHEADERS install-bfdlibLTLIBRARIES
+install-data-am: install-bfdincludeHEADERS install-bfdlibLTLIBRARIES \
+ install-info-am
install-dvi: install-dvi-recursive
-install-dvi-am:
-
+install-dvi-am: $(DVIS)
+ @$(NORMAL_INSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+ done
install-exec-am:
install-html: install-html-recursive
-install-html-am:
-
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ d2=$$d$$p; \
+ if test -d "$$d2"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d2"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-recursive
-install-info-am:
-
+install-info-am: $(INFO_DEPS)
+ @$(NORMAL_INSTALL)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+ fi; \
+ for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+ if test -f $$ifile; then \
+ echo "$$ifile"; \
+ else : ; fi; \
+ done; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+ @$(POST_INSTALL)
+ @if $(am__can_run_installinfo); then \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+ done; \
+ else : ; fi
install-man:
install-pdf: install-pdf-recursive
-install-pdf-am:
-
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
-install-ps-am:
-
+install-ps-am: $(PSS)
+ @$(NORMAL_INSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR)
-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+ maintainer-clean-generic
mostlyclean: mostlyclean-recursive
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
+mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
-pdf-am:
+pdf-am: $(PDFS)
ps: ps-recursive
-ps-am:
+ps-am: $(PSS)
-uninstall-am: uninstall-bfdincludeHEADERS uninstall-bfdlibLTLIBRARIES
+uninstall-am: uninstall-bfdincludeHEADERS uninstall-bfdlibLTLIBRARIES \
+ uninstall-dvi-am uninstall-html-am uninstall-info-am \
+ uninstall-pdf-am uninstall-ps-am
.MAKE: $(am__recursive_targets) all check install install-am \
install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
- am--refresh check check-am clean clean-bfdlibLTLIBRARIES \
- clean-cscope clean-generic clean-libtool clean-noinstLIBRARIES \
- clean-noinstLTLIBRARIES cscope cscopelist-am ctags ctags-am \
- distclean distclean-compile distclean-generic distclean-hdr \
- distclean-libtool distclean-tags dvi dvi-am html html-am info \
- info-am install install-am install-bfdincludeHEADERS \
- install-bfdlibLTLIBRARIES install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-am uninstall uninstall-am \
- uninstall-bfdincludeHEADERS uninstall-bfdlibLTLIBRARIES
+ am--refresh check check-am clean clean-aminfo \
+ clean-bfdlibLTLIBRARIES clean-cscope clean-generic \
+ clean-libtool clean-noinstLIBRARIES clean-noinstLTLIBRARIES \
+ cscope cscopelist-am ctags ctags-am dist-info distclean \
+ distclean-compile distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags dvi dvi-am html html-am \
+ html-local info info-am install install-am \
+ install-bfdincludeHEADERS install-bfdlibLTLIBRARIES \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-aminfo \
+ maintainer-clean-generic mostlyclean mostlyclean-aminfo \
+ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+ pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
+ uninstall-bfdincludeHEADERS uninstall-bfdlibLTLIBRARIES \
+ uninstall-dvi-am uninstall-html-am uninstall-info-am \
+ uninstall-pdf-am uninstall-ps-am
.PRECIOUS: Makefile
+$(BFD32_LIBS) \
+ $(BFD64_LIBS) \
+ $(ALL_MACHINES) \
+ $(BFD32_BACKENDS) \
+ $(BFD64_BACKENDS) \
+ $(OPTIONAL_BACKENDS): $(BFD_H) $(BFD_H_DEPS) $(LOCAL_H_DEPS)
po/SRC-POTFILES.in: @MAINT@ Makefile $(SRC_POTFILES)
for file in $(SRC_POTFILES); do echo $$file; done \
# vector names. It is built from config.bfd. It is not compiled by
# itself, but is included by targets.c.
targmatch.h: config.bfd targmatch.sed
- rm -f targmatch.h
- $(SED) -f $(srcdir)/targmatch.sed < $(srcdir)/config.bfd > targmatch.new
- mv -f targmatch.new targmatch.h
+ $(AM_V_at)rm -f targmatch.h
+ $(AM_V_GEN)$(SED) -f $(srcdir)/targmatch.sed < $(srcdir)/config.bfd > targmatch.new
+ $(AM_V_at)mv -f targmatch.new targmatch.h
# When compiling archures.c and targets.c, supply the default target
# info from configure.
targets.lo: targets.c Makefile
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='targets.c' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
archures.lo: archures.c Makefile
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='archures.c' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
dwarf2.lo: dwarf2.c Makefile
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dwarf2.c' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
elf32-target.h : elfxx-target.h
- rm -f elf32-target.h
- $(SED) -e s/NN/32/g < $(srcdir)/elfxx-target.h > elf32-target.new
- mv -f elf32-target.new elf32-target.h
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< > $@
elf64-target.h : elfxx-target.h
- rm -f elf64-target.h
- $(SED) -e s/NN/64/g < $(srcdir)/elfxx-target.h > elf64-target.new
- mv -f elf64-target.new elf64-target.h
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< > $@
elf32-aarch64.c : elfnn-aarch64.c
- rm -f elf32-aarch64.c
- echo "#line 1 \"$(srcdir)/elfnn-aarch64.c\"" > elf32-aarch64.new
- $(SED) -e s/NN/32/g < $(srcdir)/elfnn-aarch64.c >> elf32-aarch64.new
- mv -f elf32-aarch64.new elf32-aarch64.c
+ $(AM_V_at)echo "#line 1 \"elfnn-aarch64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-aarch64.c : elfnn-aarch64.c
- rm -f elf64-aarch64.c
- echo "#line 1 \"$(srcdir)/elfnn-aarch64.c\"" > elf64-aarch64.new
- $(SED) -e s/NN/64/g < $(srcdir)/elfnn-aarch64.c >> elf64-aarch64.new
- mv -f elf64-aarch64.new elf64-aarch64.c
+ $(AM_V_at)echo "#line 1 \"elfnn-aarch64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-ia64.c : elfnn-ia64.c
- rm -f elf32-ia64.c
- $(SED) -e s/NN/32/g < $(srcdir)/elfnn-ia64.c > elf32-ia64.new
- mv -f elf32-ia64.new elf32-ia64.c
+ $(AM_V_at)echo "#line 1 \"elfnn-ia64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-ia64.c : elfnn-ia64.c
- rm -f elf64-ia64.c
- $(SED) -e s/NN/64/g < $(srcdir)/elfnn-ia64.c > elf64-ia64.new
- mv -f elf64-ia64.new elf64-ia64.c
+ $(AM_V_at)echo "#line 1 \"elfnn-ia64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
+
+elf32-loongarch.c : elfnn-loongarch.c
+ $(AM_V_at)echo "#line 1 \"elfnn-loongarch.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
+
+elf64-loongarch.c : elfnn-loongarch.c
+ $(AM_V_at)echo "#line 1 \"elfnn-loongarch.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-riscv.c : elfnn-riscv.c
- rm -f elf32-riscv.c
- echo "#line 1 \"$(srcdir)/elfnn-riscv.c\"" > elf32-riscv.new
- sed -e s/NN/32/g < $(srcdir)/elfnn-riscv.c >> elf32-riscv.new
- mv -f elf32-riscv.new elf32-riscv.c
+ $(AM_V_at)echo "#line 1 \"elfnn-riscv.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-riscv.c : elfnn-riscv.c
- rm -f elf64-riscv.c
- echo "#line 1 \"$(srcdir)/elfnn-riscv.c\"" > elf64-riscv.new
- sed -e s/NN/64/g < $(srcdir)/elfnn-riscv.c >> elf64-riscv.new
- mv -f elf64-riscv.new elf64-riscv.c
+ $(AM_V_at)echo "#line 1 \"elfnn-riscv.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
peigen.c : peXXigen.c
- rm -f peigen.c
- $(SED) -e s/XX/pe/g < $(srcdir)/peXXigen.c > peigen.new
- mv -f peigen.new peigen.c
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pe/g < $< >> $@
pepigen.c : peXXigen.c
- rm -f pepigen.c
- $(SED) -e s/XX/pep/g < $(srcdir)/peXXigen.c > pepigen.new
- mv -f pepigen.new pepigen.c
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pep/g < $< >> $@
pex64igen.c: peXXigen.c
- rm -f pex64igen.c
- $(SED) -e s/XX/pex64/g < $(srcdir)/peXXigen.c > pex64igen.new
- mv -f pex64igen.new pex64igen.c
-$(BFD32_LIBS) \
- $(BFD64_LIBS) \
- $(ALL_MACHINES) \
- $(BFD32_BACKENDS) \
- $(BFD64_BACKENDS) \
- $(OPTIONAL_BACKENDS): $(BFD_H) $(BFD_H_DEPS) $(LOCAL_H_DEPS)
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pex64/g < $< >> $@
+
+pe-aarch64igen.c: peXXigen.c
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/peAArch64/g < $< >> $@
host-aout.lo: Makefile
rm -f bfd-tmp.h
touch stmp-bfd-h
-# Could really use a "copy-if-change"...
-headers:
- (cd $(bfddocdir); $(MAKE) protos $(FLAGS_TO_PASS))
- cp $(bfddocdir)/bfd.h bfd-in2.h-new
- $(SHELL) $(srcdir)/../move-if-change bfd-in2.h-new $(srcdir)/bfd-in2.h
- cp $(bfddocdir)/libbfd.h libbfd.h-new
- $(SHELL) $(srcdir)/../move-if-change libbfd.h-new $(srcdir)/libbfd.h
- cp $(bfddocdir)/libcoff.h libcoff.h-new
- $(SHELL) $(srcdir)/../move-if-change libcoff.h-new $(srcdir)/libcoff.h
-
-# We only rebuild the header files automatically if we have been
-# configured with --enable-maintainer-mode.
+headers: stmp-bin2-h stmp-lbfd-h stmp-lcoff-h
$(srcdir)/bfd-in2.h: @MAINT@ stmp-bin2-h ; @true
-stmp-bin2-h: $(BFD_H_FILES) $(BFD64_H_FILES)
- (cd $(bfddocdir); $(MAKE) $(FLAGS_TO_PASS) bfd.h)
- cp $(bfddocdir)/bfd.h bfd-in2.h-new
- $(SHELL) $(srcdir)/../move-if-change bfd-in2.h-new $(srcdir)/bfd-in2.h
- touch stmp-bin2-h
+stmp-bin2-h: $(BFD_H_FILES) $(BFD64_H_FILES) $(MKDOC)
+ $(AM_V_GEN)H_FILES="$(BFD_H_FILES)" CHEW_FLAGS= ; $(REGEN_HEADER) > bfd-in2.h-new
+ $(AM_V_at)$(SHELL) $(srcdir)/../move-if-change bfd-in2.h-new $(srcdir)/bfd-in2.h
+ $(AM_V_at)touch stmp-bin2-h
$(srcdir)/libbfd.h: @MAINT@ stmp-lbfd-h ; @true
-stmp-lbfd-h: $(LIBBFD_H_FILES)
- (cd $(bfddocdir); $(MAKE) $(FLAGS_TO_PASS) libbfd.h)
- cp $(bfddocdir)/libbfd.h libbfd.h-new
- $(SHELL) $(srcdir)/../move-if-change libbfd.h-new $(srcdir)/libbfd.h
- touch stmp-lbfd-h
+stmp-lbfd-h: $(LIBBFD_H_FILES) $(MKDOC)
+ $(AM_V_GEN)H_FILES="$(LIBBFD_H_FILES)" CHEW_FLAGS=-i ; $(REGEN_HEADER) > libbfd.h-new
+ $(AM_V_at)$(SHELL) $(srcdir)/../move-if-change libbfd.h-new $(srcdir)/libbfd.h
+ $(AM_V_at)touch stmp-lbfd-h
$(srcdir)/libcoff.h: @MAINT@ stmp-lcoff-h ; @true
-stmp-lcoff-h: $(LIBCOFF_H_FILES)
- (cd $(bfddocdir); $(MAKE) $(FLAGS_TO_PASS) libcoff.h)
- cp $(bfddocdir)/libcoff.h libcoff.h-new
- $(SHELL) $(srcdir)/../move-if-change libcoff.h-new $(srcdir)/libcoff.h
- touch stmp-lcoff-h
+stmp-lcoff-h: $(LIBCOFF_H_FILES) $(MKDOC)
+ $(AM_V_GEN)H_FILES="$(LIBCOFF_H_FILES)" CHEW_FLAGS=-i ; $(REGEN_HEADER) > libcoff.h-new
+ $(AM_V_at)$(SHELL) $(srcdir)/../move-if-change libcoff.h-new $(srcdir)/libcoff.h
+ $(AM_V_at)touch stmp-lcoff-h
bfdver.h: $(srcdir)/version.h $(srcdir)/development.sh $(srcdir)/Makefile.in
- @echo "creating $@"
- @bfd_version=`echo "$(VERSION)" | $(SED) -e 's/\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\).*/\1.00\2.00\3.00\4.00\5/' -e 's/\([^\.]*\)\..*\(..\)\..*\(..\)\..*\(..\)\..*\(..\)$$/\1\2\3\4\5/'` ;\
+ $(AM_V_GEN)\
+ bfd_version=`echo "$(VERSION)" | $(SED) -e 's/\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\).*/\1.00\2.00\3.00\4.00\5/' -e 's/\([^\.]*\)\..*\(..\)\..*\(..\)\..*\(..\)\..*\(..\)$$/\1\2\3\4\5/'` ;\
bfd_version_string="\"$(VERSION)\"" ;\
bfd_soversion="$(VERSION)" ;\
bfd_version_package="\"$(PKGVERSION)\"" ;\
# Disable -Werror, if it has been enabled, since coffswap.h won't
# compile with gcc 4.5 and above.
coff-tic4x.lo: coff-tic4x.c
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
coff-tic54x.lo: coff-tic54x.c
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
+
+$(MKDOC): doc/chew.stamp ; @true
+doc/chew.stamp: $(srcdir)/doc/chew.c doc/$(am__dirstamp)
+ $(AM_V_CCLD)$(CC_FOR_BUILD) -o doc/chw$$$$$(EXEEXT_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
+ $(LDFLAGS_FOR_BUILD) $(H_CFLAGS) \
+ -I. -I$(srcdir) -Idoc -I$(srcdir)/../include -I$(srcdir)/../intl -I../intl \
+ $(srcdir)/doc/chew.c && \
+ $(SHELL) $(srcdir)/../move-if-change \
+ doc/chw$$$$$(EXEEXT_FOR_BUILD) $(MKDOC) && \
+ touch $@
+
+.PRECIOUS: doc/%.stamp
+doc/%.texi: doc/%.stamp ; @true
+doc/%.stamp: $(srcdir)/%.h $(srcdir)/doc/doc.str $(MKDOC) doc/$(am__dirstamp)
+ $(AM_V_GEN)$(REGEN_TEXI)
+doc/%.stamp: $(srcdir)/%.c $(srcdir)/doc/doc.str $(MKDOC) doc/$(am__dirstamp)
+ $(AM_V_GEN)$(REGEN_TEXI)
+
+# Avoid the %.stamp generating a builddir/bfd.texi that overrides the
+# srcdir/ as well as regenerating doc/bfd.info for each make run.
+doc/bfd.stamp: $(srcdir)/doc/bfd.texi ; $(AM_V_at)touch $@
+
+# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
+# bfd.texi on an 8.3 filesystem.
+doc/bfdt.stamp: $(srcdir)/bfd.c $(srcdir)/doc/doc.str $(MKDOC) doc/$(am__dirstamp)
+ $(AM_V_GEN)$(REGEN_TEXI)
+
+doc/bfdver.texi: $(srcdir)/Makefile.in
+ $(AM_V_GEN)\
+ $(MKDIR_P) $(@D); \
+ echo "@set VERSION $(VERSION)" > $@; \
+ if test -n "$(PKGVERSION)"; then \
+ echo "@set VERSION_PACKAGE $(PKGVERSION)" >> $@; \
+ fi; \
+ echo "@set UPDATED `date '+%B %Y'`" >> $@; \
+ if test -n "$(REPORT_BUGS_TEXI)"; then \
+ echo "@set BUGURL $(REPORT_BUGS_TEXI)" >> $@; \
+ fi
+
+html-local: doc/bfd/index.html
+doc/bfd/index.html: doc/bfd.texi $(bfd_TEXINFOS) doc/$(am__dirstamp)
+ $(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ --split=node -o doc/bfd $(srcdir)/doc/bfd.texi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
projects / binutils-gdb.git / blobdiff