/* BFD semi-generic back-end for a.out binaries.
- Copyright 1990, 91, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+ Copyright 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
PARAMS ((bfd *, aout_symbol_type *));
static boolean translate_to_native_sym_flags
PARAMS ((bfd *, asymbol *, struct external_nlist *));
+static void adjust_o_magic PARAMS ((bfd *, struct internal_exec *));
+static void adjust_z_magic PARAMS ((bfd *, struct internal_exec *));
+static void adjust_n_magic PARAMS ((bfd *, struct internal_exec *));
/*
SUBSECTION
execp = abfd->tdata.aout_data->a.hdr;
/* Set the file flags */
- abfd->flags = NO_FLAGS;
+ abfd->flags = BFD_NO_FLAGS;
if (execp->a_drsize || execp->a_trsize)
abfd->flags |= HAS_RELOC;
/* Setting of EXEC_P has been deferred to the bottom of this function */
guess at whether the file is executable. If the entry point
is within the text segment, assume it is. (This makes files
executable even if their entry point address is 0, as long as
- their text starts at zero.). */
- if ((execp->a_entry >= obj_textsec(abfd)->vma) &&
- (execp->a_entry < obj_textsec(abfd)->vma + obj_textsec(abfd)->_raw_size))
+ their text starts at zero.).
+
+ This test had to be changed to deal with systems where the text segment
+ runs at a different location than the default. The problem is that the
+ entry address can appear to be outside the text segment, thus causing an
+ erroneous conclusion that the file isn't executable.
+
+ To fix this, we now accept any non-zero entry point as an indication of
+ executability. This will work most of the time, since only the linker
+ sets the entry point, and that is likely to be non-zero for most systems. */
+
+ if (execp->a_entry != 0
+ || (execp->a_entry >= obj_textsec(abfd)->vma
+ && execp->a_entry < obj_textsec(abfd)->vma + obj_textsec(abfd)->_raw_size))
abfd->flags |= EXEC_P;
#ifdef STAT_FOR_EXEC
else
*unknown = false;
break;
- /* start-sanitize-rce */
- case bfd_arch_rce:
- arch_flags = M_RCE;
- break;
- /* end-sanitize-rce */
-
default:
arch_flags = M_UNKNOWN;
}
syms = (struct external_nlist *) obj_aout_sym_window (abfd).data;
#else
/* We allocate using malloc to make the values easy to free
- later on. If we put them on the obstack it might not be
+ later on. If we put them on the objalloc it might not be
possible to free them. */
syms = ((struct external_nlist *)
bfd_malloc ((size_t) count * EXTERNAL_NLIST_SIZE));
case N_SETD: case N_SETD | N_EXT:
case N_SETB: case N_SETB | N_EXT:
{
+ /* This code is no longer needed. It used to be used to make
+ the linker handle set symbols, but they are now handled in
+ the add_symbols routine instead. */
+#if 0
asection *section;
arelent_chain *reloc;
asection *into_section;
reloc->relent.howto = CTOR_TABLE_RELOC_HOWTO(abfd);
+#endif /* 0 */
+
+ switch (cache_ptr->type & N_TYPE)
+ {
+ case N_SETA:
+ cache_ptr->symbol.section = bfd_abs_section_ptr;
+ break;
+ case N_SETT:
+ cache_ptr->symbol.section = obj_textsec (abfd);
+ break;
+ case N_SETD:
+ cache_ptr->symbol.section = obj_datasec (abfd);
+ break;
+ case N_SETB:
+ cache_ptr->symbol.section = obj_bsssec (abfd);
+ break;
+ }
+
cache_ptr->symbol.flags |= BSF_CONSTRUCTOR;
}
break;
/* This case occurs, e.g., for the *DEBUG* section of a COFF
file. */
(*_bfd_error_handler)
- ("%s: can not represent section `%s' in a.out object file format",
- bfd_get_filename (abfd), bfd_get_section_name (abfd, sec));
+ ("%s: can not represent section for symbol `%s' in a.out object file format",
+ bfd_get_filename (abfd),
+ cache_ptr->name != NULL ? cache_ptr->name : "*unknown*");
bfd_set_error (bfd_error_nonrepresentable_section);
return false;
}
/* Standard reloc stuff */
/* Output standard relocation information to a file in target byte order. */
+extern void NAME(aout,swap_std_reloc_out)
+ PARAMS ((bfd *, arelent *, struct reloc_std_external *));
+
void
NAME(aout,swap_std_reloc_out) (abfd, g, natptr)
bfd *abfd;
/* Extended stuff */
/* Output extended relocation information to a file in target byte order. */
+extern void NAME(aout,swap_ext_reloc_out)
+ PARAMS ((bfd *, arelent *, struct reloc_ext_external *));
+
void
NAME(aout,swap_ext_reloc_out) (abfd, g, natptr)
bfd *abfd;
unsigned int count = section->reloc_count;
size_t natsize;
- if (count == 0) return true;
+ if (count == 0 || section->orelocation == NULL)
+ return true;
each_size = obj_reloc_entry_size (abfd);
natsize = each_size * count;
aout_symbol_type *q = (aout_symbol_type *)(*p);
next:
switch (q->type){
+ case N_TEXT:
+ /* If this looks like a file name symbol, and it comes after
+ the line number we have found so far, but before the
+ offset, then we have probably not found the right line
+ number. */
+ if (q->symbol.value <= offset
+ && ((q->symbol.value > low_line_vma
+ && (line_file_name != NULL
+ || *line_ptr != 0))
+ || (q->symbol.value > low_func_vma
+ && func != NULL)))
+ {
+ const char *symname;
+
+ symname = q->symbol.name;
+ if (strcmp (symname + strlen (symname) - 2, ".o") == 0)
+ {
+ if (q->symbol.value > low_line_vma)
+ {
+ *line_ptr = 0;
+ line_file_name = NULL;
+ }
+ if (q->symbol.value > low_func_vma)
+ func = NULL;
+ }
+ }
+ break;
+
case N_SO:
+ /* If this symbol is less than the offset, but greater than
+ the line number we have found so far, then we have not
+ found the right line number. */
+ if (q->symbol.value <= offset)
+ {
+ if (q->symbol.value > low_line_vma)
+ {
+ *line_ptr = 0;
+ line_file_name = NULL;
+ }
+ if (q->symbol.value > low_func_vma)
+ func = NULL;
+ }
+
main_file_name = current_file_name = q->symbol.name;
/* Look ahead to next symbol to check if that too is an N_SO. */
p++;
adata (abfd).line_buf = buf = NULL;
else
{
- buf = (char *) bfd_malloc (filelen + funclen + 2);
+ buf = (char *) bfd_malloc (filelen + funclen + 3);
adata (abfd).line_buf = buf;
if (buf == NULL)
return false;
obj_datasec (abfd)->reloc_count =
exec_hdr (abfd)->a_drsize / obj_reloc_entry_size (abfd);
- /* Write out the string table. */
- if (bfd_seek (abfd, obj_str_filepos (abfd), SEEK_SET) != 0)
- goto error_return;
- return emit_stringtab (abfd, aout_info.strtab);
+ /* Write out the string table, unless there are no symbols. */
+ if (abfd->symcount > 0)
+ {
+ if (bfd_seek (abfd, obj_str_filepos (abfd), SEEK_SET) != 0
+ || ! emit_stringtab (abfd, aout_info.strtab))
+ goto error_return;
+ }
+
+ return true;
error_return:
if (aout_info.contents != NULL)
case discard_none:
break;
case discard_l:
- if (*name == *finfo->info->lprefix
- && (finfo->info->lprefix_len == 1
- || strncmp (name, finfo->info->lprefix,
- finfo->info->lprefix_len) == 0))
+ if ((type & N_STAB) == 0
+ && bfd_is_local_label_name (input_bfd, name))
skip = true;
break;
case discard_all:
{
/* We are generating a relocateable output file, and must
modify the reloc accordingly. */
- if (r_extern)
+ if (r_extern
+ || r_type == RELOC_BASE10
+ || r_type == RELOC_BASE13
+ || r_type == RELOC_BASE22)
{
/* If we know the symbol this relocation is against,
convert it into a relocation against a section. This
is what the native linker does. */
- h = sym_hashes[r_index];
+ if (r_type == RELOC_BASE10
+ || r_type == RELOC_BASE13
+ || r_type == RELOC_BASE22)
+ h = NULL;
+ else
+ h = sym_hashes[r_index];
if (h != (struct aout_link_hash_entry *) NULL
&& (h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak))
}
/* As described above, we must always adjust a PC relative
- reloc by the change in VMA of the source. */
- if (howto_table_ext[r_type].pc_relative)
+ reloc by the change in VMA of the source. However, if
+ pcrel_offset is set, then the addend does not include the
+ location within the section, in which case we don't need
+ to adjust anything. */
+ if (howto_table_ext[r_type].pc_relative
+ && ! howto_table_ext[r_type].pcrel_offset)
relocation -= (input_section->output_section->vma
+ input_section->output_offset
- input_section->vma);
projects / binutils-gdb.git / blobdiff