+/* DO NOT EDIT! -*- buffer-read-only: t -*- This file is automatically
+ generated from "bfd-in.h", "init.c", "opncls.c", "libbfd.c",
+ "section.c", "archures.c", "reloc.c", "syms.c", "bfd.c", "archive.c",
+ "corefile.c", "targets.c" and "format.c".
+ Run "make headers" in your build bfd/ to regenerate. */
+
/* Main header file for the bfd library -- portable access to object files.
- Copyright 1990, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002
Free Software Foundation, Inc.
Contributed by Cygnus Support.
-** NOTE: bfd.h and bfd-in2.h are GENERATED files. Don't change them;
-** instead, change bfd-in.h or the other BFD source files processed to
-** generate these files.
-
This file is part of BFD, the Binary File Descriptor library.
This program is free software; you can redistribute it and/or modify
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-/* bfd.h -- The only header file required by users of the bfd library
-
-The bfd.h file is generated from bfd-in.h and various .c files; if you
-change it, your changes will probably be lost.
-
-All the prototypes and definitions following the comment "THE FOLLOWING
-IS EXTRACTED FROM THE SOURCE" are extracted from the source files for
-BFD. If you change it, someone oneday will extract it from the source
-again, and your changes will be lost. To save yourself from this bind,
-change the definitions in the source in the bfd directory. Type "make
-docs" and then "make headers" in that directory, and magically this file
-will change to reflect your changes.
-
-If you don't have the tools to perform the extraction, then you are
-safe from someone on your system trampling over your header files.
-You should still maintain the equivalence between the source and this
-file though; every change you make to the .c file should be reflected
-here. */
-
#ifndef __BFD_H_SEEN__
#define __BFD_H_SEEN__
#endif
#include "ansidecl.h"
+#include "symcat.h"
+#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
+#ifndef SABER
+/* This hack is to avoid a problem with some strict ANSI C preprocessors.
+ The problem is, "32_" is not a valid preprocessing token, and we don't
+ want extra underscores (e.g., "nlm_32_"). The XCONCAT2 macro will
+ cause the inner CONCAT2 macros to be evaluated first, producing
+ still-valid pp-tokens. Then the final concatenation can be done. */
+#undef CONCAT4
+#define CONCAT4(a,b,c,d) XCONCAT2(CONCAT2(a,b),CONCAT2(c,d))
+#endif
+#endif
+
+#define BFD_VERSION @bfd_version@
+#define BFD_VERSION_DATE @bfd_version_date@
+#define BFD_VERSION_STRING @bfd_version_string@
-/* These two lines get substitutions done by commands in Makefile.in. */
-#define BFD_VERSION "@VERSION@"
+/* The word size used by BFD on the host. This may be 64 with a 32
+ bit target if the host is 64 bit, or if other 64 bit targets have
+ been selected with --enable-targets, or if --enable-64-bit-bfd. */
#define BFD_ARCH_SIZE @wordsize@
+
+/* The word size of the default bfd target. */
+#define BFD_DEFAULT_TARGET_SIZE @bfd_default_target_size@
+
#define BFD_HOST_64BIT_LONG @BFD_HOST_64BIT_LONG@
#if @BFD_HOST_64_BIT_DEFINED@
#define BFD_HOST_64_BIT @BFD_HOST_64_BIT@
#endif
#endif
-/* forward declaration */
+/* Forward declaration. */
typedef struct _bfd bfd;
/* To squelch erroneous compiler warnings ("illegal pointer
/* General rules: functions which are boolean return true on success
and false on failure (unless they're a predicate). -- bfd.doc */
/* I'm sure this is going to break something and someone is going to
- force me to change it. */
+ force me to change it. */
/* typedef enum boolean {false, true} boolean; */
/* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h> -fnf */
/* It gets worse if the host also defines a true/false enum... -sts */
/* And even worse if your compiler has built-in boolean types... -law */
+/* And even worse if your compiler provides a stdbool.h that conflicts
+ with these definitions... gcc 2.95 and later do. If so, it must
+ be included first. -drow */
#if defined (__GNUG__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 6))
#define TRUE_FALSE_ALREADY_DEFINED
+#else
+#if defined (__bool_true_false_are_defined)
+/* We have <stdbool.h>. */
+#define TRUE_FALSE_ALREADY_DEFINED
+#endif
#endif
#ifdef MPW
-/* Pre-emptive strike - get the file with the enum. */
+/* Pre-emptive strike - get the file with the enum. */
#include <Types.h>
#define TRUE_FALSE_ALREADY_DEFINED
#endif /* MPW */
typedef enum bfd_boolean {bfd_fffalse, bfd_tttrue} boolean;
#endif
-/* A pointer to a position in a file. */
-/* FIXME: This should be using off_t from <sys/types.h>.
- For now, try to avoid breaking stuff by not including <sys/types.h> here.
- This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
- Probably the best long-term answer is to avoid using file_ptr AND off_t
- in this header file, and to handle this in the BFD implementation
- rather than in its interface. */
-/* typedef off_t file_ptr; */
-typedef long int file_ptr;
-
/* Support for different sizes of target format ints and addresses.
If the type `long' is at least 64 bits, BFD_HOST_64BIT_LONG will be
set to 1 above. Otherwise, if gcc is being used, this code will
typedef unsigned long bfd_size_type;
/* Print a bfd_vma x on stream s. */
-#define fprintf_vma(s,x) fprintf(s, "%08lx", x)
-#define sprintf_vma(s,x) sprintf(s, "%08lx", x)
+#define fprintf_vma(s,x) fprintf (s, "%08lx", x)
+#define sprintf_vma(s,x) sprintf (s, "%08lx", x)
#endif /* not BFD64 */
+/* A pointer to a position in a file. */
+/* FIXME: This should be using off_t from <sys/types.h>.
+ For now, try to avoid breaking stuff by not including <sys/types.h> here.
+ This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
+ Probably the best long-term answer is to avoid using file_ptr AND off_t
+ in this header file, and to handle this in the BFD implementation
+ rather than in its interface. */
+/* typedef off_t file_ptr; */
+typedef bfd_signed_vma file_ptr;
+typedef bfd_vma ufile_ptr;
+
+extern void bfd_sprintf_vma PARAMS ((bfd *, char *, bfd_vma));
+extern void bfd_fprintf_vma PARAMS ((bfd *, PTR, bfd_vma));
+
#define printf_vma(x) fprintf_vma(stdout,x)
+#define bfd_printf_vma(abfd,x) bfd_fprintf_vma (abfd,stdout,x)
typedef unsigned int flagword; /* 32 bits of flags */
typedef unsigned char bfd_byte;
\f
-/** File formats */
+/* File formats. */
-typedef enum bfd_format {
- bfd_unknown = 0, /* file format is unknown */
- bfd_object, /* linker/assember/compiler output */
- bfd_archive, /* object archive file */
- bfd_core, /* core dump */
- bfd_type_end} /* marks the end; don't use it! */
- bfd_format;
+typedef enum bfd_format
+{
+ bfd_unknown = 0, /* File format is unknown. */
+ bfd_object, /* Linker/assember/compiler output. */
+ bfd_archive, /* Object archive file. */
+ bfd_core, /* Core dump. */
+ bfd_type_end /* Marks the end; don't use it! */
+}
+bfd_format;
/* Values that may appear in the flags field of a BFD. These also
appear in the object_flags field of the bfd_target structure, where
memory. If this is set, iostream points to a bfd_in_memory struct. */
#define BFD_IN_MEMORY 0x800
\f
-/* symbols and relocation */
+/* Symbols and relocation. */
/* A count of carsyms (canonical archive symbols). */
typedef unsigned long symindex;
#define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
/* A canonical archive symbol. */
-/* This is a type pun with struct ranlib on purpose! */
-typedef struct carsym {
+/* This is a type pun with struct ranlib on purpose! */
+typedef struct carsym
+{
char *name;
- file_ptr file_offset; /* look here to find the file */
-} carsym; /* to make these you call a carsymogen */
-
+ file_ptr file_offset; /* Look here to find the file. */
+}
+carsym; /* To make these you call a carsymogen. */
/* Used in generating armaps (archive tables of contents).
- Perhaps just a forward definition would do? */
-struct orl { /* output ranlib */
- char **name; /* symbol name */
- file_ptr pos; /* bfd* or file position */
- int namidx; /* index into string table */
+ Perhaps just a forward definition would do? */
+struct orl /* Output ranlib. */
+{
+ char **name; /* Symbol name. */
+ union
+ {
+ file_ptr pos;
+ bfd *abfd;
+ } u; /* bfd* or file position. */
+ int namidx; /* Index into string table. */
};
\f
-
-/* Linenumber stuff */
-typedef struct lineno_cache_entry {
- unsigned int line_number; /* Linenumber from start of function*/
- union {
- struct symbol_cache_entry *sym; /* Function name */
- unsigned long offset; /* Offset into section */
+/* Linenumber stuff. */
+typedef struct lineno_cache_entry
+{
+ unsigned int line_number; /* Linenumber from start of function. */
+ union
+ {
+ struct symbol_cache_entry *sym; /* Function name. */
+ bfd_vma offset; /* Offset into section. */
} u;
-} alent;
+}
+alent;
\f
-/* object and core file sections */
+/* Object and core file sections. */
#define align_power(addr, align) \
( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
#define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0)
#define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0)
+#define bfd_get_section_lma(bfd, ptr) ((ptr)->lma + 0)
#define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0)
#define bfd_section_name(bfd, ptr) ((ptr)->name)
#define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr))
#define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0)
-#define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = (boolean)true), true)
+#define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma = (val)), ((ptr)->user_set_vma = (boolean)true), true)
#define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
#define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
{
symvalue value;
char type;
- CONST char *name; /* Symbol name. */
+ const char *name; /* Symbol name. */
unsigned char stab_type; /* Stab type. */
- char stab_other; /* Stab other. */
+ char stab_other; /* Stab other. */
short stab_desc; /* Stab desc. */
- CONST char *stab_name; /* String for stab type. */
+ const char *stab_name; /* String for stab type. */
} symbol_info;
/* Get the name of a stabs type code. */
boolean (*) (struct bfd_hash_entry *,
PTR),
PTR info));
-\f
-/* Semi-portable string concatenation in cpp.
- The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors.
- The problem is, "32_" is not a valid preprocessing token, and we don't
- want extra underscores (e.g., "nlm_32_"). The XCAT2 macro will cause the
- inner CAT macros to be evaluated first, producing still-valid pp-tokens.
- Then the final concatenation can be done. (Sigh.) */
-#ifndef CAT
-#ifdef SABER
-#define CAT(a,b) a##b
-#define CAT3(a,b,c) a##b##c
-#define CAT4(a,b,c,d) a##b##c##d
-#else
-#if defined(__STDC__) || defined(ALMOST_STDC)
-#define CAT(a,b) a##b
-#define CAT3(a,b,c) a##b##c
-#define XCAT2(a,b) CAT(a,b)
-#define CAT4(a,b,c,d) XCAT2(CAT(a,b),CAT(c,d))
-#else
-#define CAT(a,b) a/**/b
-#define CAT3(a,b,c) a/**/b/**/c
-#define CAT4(a,b,c,d) a/**/b/**/c/**/d
-#endif
-#endif
-#endif
#define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
-\f
-/* User program access to BFD facilities */
+
+/* User program access to BFD facilities. */
/* Direct I/O routines, for programs which know more about the object
file than BFD does. Use higher level routines if possible. */
-extern bfd_size_type bfd_read
- PARAMS ((PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
-extern bfd_size_type bfd_write
- PARAMS ((const PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
-extern int bfd_seek PARAMS ((bfd *abfd, file_ptr fp, int direction));
-extern long bfd_tell PARAMS ((bfd *abfd));
-extern int bfd_flush PARAMS ((bfd *abfd));
-extern int bfd_stat PARAMS ((bfd *abfd, struct stat *));
-
+extern bfd_size_type bfd_bread PARAMS ((PTR, bfd_size_type, bfd *));
+extern bfd_size_type bfd_bwrite PARAMS ((const PTR, bfd_size_type, bfd *));
+extern int bfd_seek PARAMS ((bfd *, file_ptr, int));
+extern ufile_ptr bfd_tell PARAMS ((bfd *));
+extern int bfd_flush PARAMS ((bfd *));
+extern int bfd_stat PARAMS ((bfd *, struct stat *));
+
+/* Deprecated old routines. */
+#if __GNUC__
+#define bfd_read(BUF, ELTSIZE, NITEMS, ABFD) \
+ (warn_deprecated ("bfd_read", __FILE__, __LINE__, __FUNCTION__), \
+ bfd_bread ((BUF), (ELTSIZE) * (NITEMS), (ABFD)))
+#define bfd_write(BUF, ELTSIZE, NITEMS, ABFD) \
+ (warn_deprecated ("bfd_write", __FILE__, __LINE__, __FUNCTION__), \
+ bfd_bwrite ((BUF), (ELTSIZE) * (NITEMS), (ABFD)))
+#else
+#define bfd_read(BUF, ELTSIZE, NITEMS, ABFD) \
+ (warn_deprecated ("bfd_read", (const char *) 0, 0, (const char *) 0), \
+ bfd_bread ((BUF), (ELTSIZE) * (NITEMS), (ABFD)))
+#define bfd_write(BUF, ELTSIZE, NITEMS, ABFD) \
+ (warn_deprecated ("bfd_write", (const char *) 0, 0, (const char *) 0),\
+ bfd_bwrite ((BUF), (ELTSIZE) * (NITEMS), (ABFD)))
+#endif
+extern void warn_deprecated
+ PARAMS ((const char *, const char *, int, const char *));
/* Cast from const char * to char * so that caller can assign to
a char * without a warning. */
#define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char)
-#define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (boolean)(bool)), true)
+#define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (boolean) (bool)), true)
+
+extern boolean bfd_cache_close PARAMS ((bfd *abfd));
+/* NB: This declaration should match the autogenerated one in libbfd.h. */
extern boolean bfd_record_phdr
PARAMS ((bfd *, unsigned long, boolean, flagword, boolean, bfd_vma,
void bfd_putl32 PARAMS ((bfd_vma, unsigned char *));
void bfd_putb16 PARAMS ((bfd_vma, unsigned char *));
void bfd_putl16 PARAMS ((bfd_vma, unsigned char *));
+
+/* Byte swapping routines which take size and endiannes as arguments. */
+
+bfd_vma bfd_get_bits PARAMS ((bfd_byte *, int, boolean));
+void bfd_put_bits PARAMS ((bfd_vma, bfd_byte *, int, boolean));
\f
/* Externally visible ECOFF routines. */
extern boolean bfd_elf_get_bfd_needed_list
PARAMS ((bfd *, struct bfd_link_needed_list **));
extern boolean bfd_elf32_size_dynamic_sections
- PARAMS ((bfd *, const char *, const char *, boolean, const char *,
+ PARAMS ((bfd *, const char *, const char *, const char *,
const char * const *, struct bfd_link_info *, struct sec **,
struct bfd_elf_version_tree *));
extern boolean bfd_elf64_size_dynamic_sections
- PARAMS ((bfd *, const char *, const char *, boolean, const char *,
+ PARAMS ((bfd *, const char *, const char *, const char *,
const char * const *, struct bfd_link_info *, struct sec **,
struct bfd_elf_version_tree *));
extern void bfd_elf_set_dt_needed_name PARAMS ((bfd *, const char *));
+extern void bfd_elf_set_dt_needed_soname PARAMS ((bfd *, const char *));
extern const char *bfd_elf_get_dt_soname PARAMS ((bfd *));
+extern struct bfd_link_needed_list *bfd_elf_get_runpath_list
+ PARAMS ((bfd *, struct bfd_link_info *));
+extern boolean bfd_elf32_discard_info
+ PARAMS ((bfd *, struct bfd_link_info *));
+extern boolean bfd_elf64_discard_info
+ PARAMS ((bfd *, struct bfd_link_info *));
/* Return an upper bound on the number of bytes required to store a
copy of ABFD's program header table entries. Return -1 if an error
extern int bfd_get_elf_phdrs PARAMS ((bfd *abfd, void *phdrs));
/* Return the arch_size field of an elf bfd, or -1 if not elf. */
-extern int bfd_elf_get_arch_size PARAMS ((bfd *));
+extern int bfd_get_arch_size PARAMS ((bfd *));
+
+/* Return true if address "naturally" sign extends, or -1 if not elf. */
+extern int bfd_get_sign_extend_vma PARAMS ((bfd *));
-/* Return true if address "naturally" sign extends, or -1 if not elf. */
-extern int bfd_elf_get_sign_extend_vma PARAMS ((bfd *));
+extern boolean bfd_m68k_elf32_create_embedded_relocs
+ PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
+ char **));
+extern boolean bfd_mips_elf32_create_embedded_relocs
+ PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
+ char **));
/* SunOS shared library support routines for the linker. */
struct _bfd_window_internal;
typedef struct _bfd_window_internal bfd_window_internal;
-typedef struct _bfd_window {
+typedef struct _bfd_window
+{
/* What the user asked for. */
PTR data;
bfd_size_type size;
application; don't want to give the same region back when the
application wants two writable copies! */
struct _bfd_window_internal *i;
-} bfd_window;
+}
+bfd_window;
extern void bfd_init_window PARAMS ((bfd_window *));
extern void bfd_free_window PARAMS ((bfd_window *));
bfd_size_type));
extern boolean bfd_xcoff_import_symbol
PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
- bfd_vma, const char *, const char *, const char *));
+ bfd_vma, const char *, const char *, const char *, unsigned int));
extern boolean bfd_xcoff_export_symbol
- PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
- boolean));
+ PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *));
extern boolean bfd_xcoff_link_count_reloc
PARAMS ((bfd *, struct bfd_link_info *, const char *));
extern boolean bfd_xcoff_record_link_assignment
extern boolean bfd_xcoff_size_dynamic_sections
PARAMS ((bfd *, struct bfd_link_info *, const char *, const char *,
unsigned long, unsigned long, unsigned long, boolean,
- int, boolean, boolean, struct sec **));
+ int, boolean, boolean, struct sec **, boolean));
+extern boolean bfd_xcoff_link_generate_rtinit
+ PARAMS ((bfd *, const char *, const char *, boolean));
+
+/* XCOFF support routines for ar. */
+extern boolean bfd_xcoff_ar_archive_set_magic PARAMS ((bfd *, char *));
/* Externally visible COFF routines. */
extern boolean bfd_coff_set_symbol_class
PARAMS ((bfd *, struct symbol_cache_entry *, unsigned int));
+extern boolean bfd_m68k_coff_create_embedded_relocs
+ PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
+ char **));
+
/* ARM Interworking support. Called from linker. */
extern boolean bfd_arm_allocate_interworking_sections
PARAMS ((struct bfd_link_info *));
extern boolean bfd_elf32_arm_get_bfd_for_interworking
PARAMS ((bfd *, struct bfd_link_info *));
-/* TI COFF load page support. */
+/* TI COFF load page support. */
extern void bfd_ticoff_set_section_load_page
PARAMS ((struct sec *, int));
PARAMS ((struct sec *));
/* And more from the source. */
-void
+void
bfd_init PARAMS ((void));
bfd *
-bfd_openr PARAMS ((CONST char *filename, CONST char *target));
+bfd_openr PARAMS ((const char *filename, const char *target));
bfd *
-bfd_fdopenr PARAMS ((CONST char *filename, CONST char *target, int fd));
+bfd_fdopenr PARAMS ((const char *filename, const char *target, int fd));
bfd *
bfd_openstreamr PARAMS ((const char *, const char *, PTR));
bfd *
-bfd_openw PARAMS ((CONST char *filename, CONST char *target));
+bfd_openw PARAMS ((const char *filename, const char *target));
-boolean
+boolean
bfd_close PARAMS ((bfd *abfd));
-boolean
+boolean
bfd_close_all_done PARAMS ((bfd *));
bfd *
-bfd_create PARAMS ((CONST char *filename, bfd *templ));
+bfd_create PARAMS ((const char *filename, bfd *templ));
-boolean
+boolean
bfd_make_writable PARAMS ((bfd *abfd));
-boolean
+boolean
bfd_make_readable PARAMS ((bfd *abfd));
/* Byte swapping macros for user section data. */
#define bfd_put_8(abfd, val, ptr) \
- ((void) (*((unsigned char *)(ptr)) = (unsigned char)(val)))
+ ((void) (*((unsigned char *) (ptr)) = (unsigned char) (val)))
#define bfd_put_signed_8 \
bfd_put_8
#define bfd_get_8(abfd, ptr) \
- (*(unsigned char *)(ptr))
+ (*(unsigned char *) (ptr) & 0xff)
#define bfd_get_signed_8(abfd, ptr) \
- ((*(unsigned char *)(ptr) ^ 0x80) - 0x80)
+ (((*(unsigned char *) (ptr) & 0xff) ^ 0x80) - 0x80)
#define bfd_put_16(abfd, val, ptr) \
BFD_SEND(abfd, bfd_putx16, ((val),(ptr)))
BFD_SEND(abfd, bfd_getx_signed_64, (ptr))
#define bfd_get(bits, abfd, ptr) \
- ((bits) == 8 ? bfd_get_8 (abfd, ptr) \
+ ( (bits) == 8 ? (bfd_vma) bfd_get_8 (abfd, ptr) \
: (bits) == 16 ? bfd_get_16 (abfd, ptr) \
: (bits) == 32 ? bfd_get_32 (abfd, ptr) \
: (bits) == 64 ? bfd_get_64 (abfd, ptr) \
: (abort (), (bfd_vma) - 1))
#define bfd_put(bits, abfd, val, ptr) \
- ((bits) == 8 ? bfd_put_8 (abfd, val, ptr) \
+ ( (bits) == 8 ? bfd_put_8 (abfd, val, ptr) \
: (bits) == 16 ? bfd_put_16 (abfd, val, ptr) \
: (bits) == 32 ? bfd_put_32 (abfd, val, ptr) \
: (bits) == 64 ? bfd_put_64 (abfd, val, ptr) \
/* Byte swapping macros for file header data. */
#define bfd_h_put_8(abfd, val, ptr) \
- bfd_put_8 (abfd, val, ptr)
+ bfd_put_8 (abfd, val, ptr)
#define bfd_h_put_signed_8(abfd, val, ptr) \
- bfd_put_8 (abfd, val, ptr)
+ bfd_put_8 (abfd, val, ptr)
#define bfd_h_get_8(abfd, ptr) \
- bfd_get_8 (abfd, ptr)
+ bfd_get_8 (abfd, ptr)
#define bfd_h_get_signed_8(abfd, ptr) \
- bfd_get_signed_8 (abfd, ptr)
+ bfd_get_signed_8 (abfd, ptr)
#define bfd_h_put_16(abfd, val, ptr) \
- BFD_SEND(abfd, bfd_h_putx16,(val,ptr))
+ BFD_SEND (abfd, bfd_h_putx16, (val, ptr))
#define bfd_h_put_signed_16 \
- bfd_h_put_16
+ bfd_h_put_16
#define bfd_h_get_16(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx16,(ptr))
+ BFD_SEND (abfd, bfd_h_getx16, (ptr))
#define bfd_h_get_signed_16(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr))
+ BFD_SEND (abfd, bfd_h_getx_signed_16, (ptr))
#define bfd_h_put_32(abfd, val, ptr) \
- BFD_SEND(abfd, bfd_h_putx32,(val,ptr))
+ BFD_SEND (abfd, bfd_h_putx32, (val, ptr))
#define bfd_h_put_signed_32 \
- bfd_h_put_32
+ bfd_h_put_32
#define bfd_h_get_32(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx32,(ptr))
+ BFD_SEND (abfd, bfd_h_getx32, (ptr))
#define bfd_h_get_signed_32(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr))
+ BFD_SEND (abfd, bfd_h_getx_signed_32, (ptr))
#define bfd_h_put_64(abfd, val, ptr) \
- BFD_SEND(abfd, bfd_h_putx64,(val, ptr))
+ BFD_SEND (abfd, bfd_h_putx64, (val, ptr))
#define bfd_h_put_signed_64 \
- bfd_h_put_64
+ bfd_h_put_64
#define bfd_h_get_64(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx64,(ptr))
+ BFD_SEND (abfd, bfd_h_getx64, (ptr))
#define bfd_h_get_signed_64(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
+ BFD_SEND (abfd, bfd_h_getx_signed_64, (ptr))
+
+/* Refinements on the above, which should eventually go away. Save
+ cluttering the source with (bfd_vma) and (bfd_byte *) casts. */
+
+#define H_PUT_64(abfd, val, where) \
+ bfd_h_put_64 ((abfd), (bfd_vma) (val), (bfd_byte *) (where))
+
+#define H_PUT_32(abfd, val, where) \
+ bfd_h_put_32 ((abfd), (bfd_vma) (val), (bfd_byte *) (where))
+
+#define H_PUT_16(abfd, val, where) \
+ bfd_h_put_16 ((abfd), (bfd_vma) (val), (bfd_byte *) (where))
+
+#define H_PUT_8 bfd_h_put_8
+
+#define H_PUT_S64(abfd, val, where) \
+ bfd_h_put_signed_64 ((abfd), (bfd_vma) (val), (bfd_byte *) (where))
+
+#define H_PUT_S32(abfd, val, where) \
+ bfd_h_put_signed_32 ((abfd), (bfd_vma) (val), (bfd_byte *) (where))
+
+#define H_PUT_S16(abfd, val, where) \
+ bfd_h_put_signed_16 ((abfd), (bfd_vma) (val), (bfd_byte *) (where))
+
+#define H_PUT_S8 bfd_h_put_signed_8
+
+#define H_GET_64(abfd, where) \
+ bfd_h_get_64 ((abfd), (bfd_byte *) (where))
+
+#define H_GET_32(abfd, where) \
+ bfd_h_get_32 ((abfd), (bfd_byte *) (where))
+
+#define H_GET_16(abfd, where) \
+ bfd_h_get_16 ((abfd), (bfd_byte *) (where))
+
+#define H_GET_8 bfd_h_get_8
+
+#define H_GET_S64(abfd, where) \
+ bfd_h_get_signed_64 ((abfd), (bfd_byte *) (where))
+
+#define H_GET_S32(abfd, where) \
+ bfd_h_get_signed_32 ((abfd), (bfd_byte *) (where))
+
+#define H_GET_S16(abfd, where) \
+ bfd_h_get_signed_16 ((abfd), (bfd_byte *) (where))
+
+#define H_GET_S8 bfd_h_get_signed_8
+
/* This structure is used for a comdat section, as in PE. A comdat
section is associated with a particular symbol. When the linker
specific code; it is not an index into the list returned by
bfd_canonicalize_symtab. */
long symbol;
-
- /* If this section is being discarded, the linker uses this field
- to point to the input section which is being kept. */
- struct sec *sec;
};
typedef struct sec
{
/* The name of the section; the name isn't a copy, the pointer is
the same as that passed to bfd_make_section. */
-
const char *name;
/* A unique sequence number. */
-
int id;
- /* Which section is it; 0..nth. */
-
+ /* Which section in the bfd; 0..n-1 as sections are created in a bfd. */
int index;
/* The next section in the list belonging to the BFD, or NULL. */
-
struct sec *next;
/* The field flags contains attributes of the section. Some
flags are read in from the object file, and some are
synthesized from other information. */
-
flagword flags;
#define SEC_NO_FLAGS 0x000
some relocation information too. */
#define SEC_RELOC 0x004
-#if 0 /* Obsolete ? */
-#define SEC_BALIGN 0x008
-#endif
+ /* ELF reserves 4 processor specific bits and 8 operating system
+ specific bits in sh_flags; at present we can get away with just
+ one in communicating between the assembler and BFD, but this
+ isn't a good long-term solution. */
+#define SEC_ARCH_BIT_0 0x008
/* A signal to the OS that the section contains read only data. */
#define SEC_READONLY 0x010
sections. */
#define SEC_COFF_SHARED_LIBRARY 0x800
+ /* The section has GOT references. This flag is only for the
+ linker, and is currently only used by the elf32-hppa back end.
+ It will be set if global offset table references were detected
+ in this section, which indicate to the linker that the section
+ contains PIC code, and must be handled specially when doing a
+ static link. */
+#define SEC_HAS_GOT_REF 0x4000
+
/* The section contains common symbols (symbols may be defined
multiple times, the value of a symbol is the amount of
space it requires, and the largest symbol value is the one
objects are to be further relocated. */
#define SEC_EXCLUDE 0x40000
- /* The contents of this section are to be sorted by the
- based on the address specified in the associated symbol
- table. */
+ /* The contents of this section are to be sorted based on the sum of
+ the symbol and addend values specified by the associated relocation
+ entries. Entries without associated relocation entries will be
+ appended to the end of the section in an unspecified order. */
#define SEC_SORT_ENTRIES 0x80000
/* When linking, duplicate sections of the same name should be
references found to any symbol in the section. */
#define SEC_CLINK 0x10000000
+ /* Attempt to merge identical entities in the section.
+ Entity size is given in the entsize field. */
+#define SEC_MERGE 0x20000000
+
+ /* If given with SEC_MERGE, entities to merge are zero terminated
+ strings where entsize specifies character size instead of fixed
+ size entries. */
+#define SEC_STRINGS 0x40000000
+
+ /* This section contains data about section groups. */
+#define SEC_GROUP 0x80000000
+
/* End of section flags. */
/* Some internal packed boolean fields. */
/* A mark flag used by some of the linker backends. */
unsigned int linker_mark : 1;
+ /* Another mark flag used by some of the linker backends. Set for
+ output sections that have an input section. */
+ unsigned int linker_has_input : 1;
+
/* A mark flag used by some linker backends for garbage collection. */
unsigned int gc_mark : 1;
+ /* Used by the ELF code to mark sections which have been allocated
+ to segments. */
+ unsigned int segment_mark : 1;
+
/* End of internal packed boolean fields. */
/* The virtual memory address of the section - where it will be
backend can assign addresses (for example, in <<a.out>>, where
the default address for <<.data>> is dependent on the specific
target and various flags). */
-
bfd_vma vma;
/* The load address of the section - where it would be in a
rom image; really only used for writing section header
- information. */
-
+ information. */
bfd_vma lma;
/* The size of the section in octets, as it will be output.
Contains a value even if the section has no contents (e.g., the
size of <<.bss>>). This will be filled in after relocation. */
-
bfd_size_type _cooked_size;
/* The original size on disk of the section, in octets. Normally this
value is the same as the size, but if some relaxing has
been done, then this value will be bigger. */
-
bfd_size_type _raw_size;
/* If this section is going to be output, then this value is the
100th octet (8-bit quantity) in the output section, this value
would be 100. However, if the target byte size is 16 bits
(bfd_octets_per_byte is "2"), this value would be 50. */
-
bfd_vma output_offset;
/* The output section through which to map on output. */
-
struct sec *output_section;
/* The alignment requirement of the section, as an exponent of 2 -
e.g., 3 aligns to 2^3 (or 8). */
-
unsigned int alignment_power;
/* If an input section, a pointer to a vector of relocation
records for the data in this section. */
-
struct reloc_cache_entry *relocation;
/* If an output section, a pointer to a vector of pointers to
relocation records for the data in this section. */
-
struct reloc_cache_entry **orelocation;
- /* The number of relocation records in one of the above */
-
+ /* The number of relocation records in one of the above. */
unsigned reloc_count;
/* Information below is back end specific - and not always used
or updated. */
/* File position of section data. */
-
file_ptr filepos;
/* File position of relocation info. */
-
file_ptr rel_filepos;
/* File position of line data. */
-
file_ptr line_filepos;
/* Pointer to data for applications. */
-
PTR userdata;
/* If the SEC_IN_MEMORY flag is set, this points to the actual
unsigned char *contents;
/* Attached line number information. */
-
alent *lineno;
/* Number of line number records. */
-
unsigned int lineno_count;
- /* Optional information about a COMDAT entry; NULL if not COMDAT. */
+ /* Entity size for merging purposes. */
+ unsigned int entsize;
+ /* Optional information about a COMDAT entry; NULL if not COMDAT. */
struct bfd_comdat_info *comdat;
/* When a section is being output, this value changes as more
linenumbers are written out. */
-
file_ptr moving_line_filepos;
/* What the section number is in the target world. */
-
int target_index;
PTR used_by_bfd;
/* If this is a constructor section then here is a list of the
relocations created to relocate items within it. */
-
struct relent_chain *constructor_chain;
/* The BFD which owns the section. */
-
bfd *owner;
- /* A symbol which points at this section only */
+ /* A symbol which points at this section only. */
struct symbol_cache_entry *symbol;
struct symbol_cache_entry **symbol_ptr_ptr;
struct bfd_link_order *link_order_head;
struct bfd_link_order *link_order_tail;
-} asection ;
+} asection;
/* These sections are global, and are managed by BFD. The application
and target back end are not permitted to change the values in
#define BFD_COM_SECTION_NAME "*COM*"
#define BFD_IND_SECTION_NAME "*IND*"
-/* the absolute section */
+/* The absolute section. */
extern const asection bfd_abs_section;
#define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
#define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
-/* Pointer to the undefined section */
+/* Pointer to the undefined section. */
extern const asection bfd_und_section;
#define bfd_und_section_ptr ((asection *) &bfd_und_section)
#define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
-/* Pointer to the common section */
+/* Pointer to the common section. */
extern const asection bfd_com_section;
#define bfd_com_section_ptr ((asection *) &bfd_com_section)
-/* Pointer to the indirect section */
+/* Pointer to the indirect section. */
extern const asection bfd_ind_section;
#define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
#define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
+#define bfd_is_const_section(SEC) \
+ ( ((SEC) == bfd_abs_section_ptr) \
+ || ((SEC) == bfd_und_section_ptr) \
+ || ((SEC) == bfd_com_section_ptr) \
+ || ((SEC) == bfd_ind_section_ptr))
+
extern const struct symbol_cache_entry * const bfd_abs_symbol;
extern const struct symbol_cache_entry * const bfd_com_symbol;
extern const struct symbol_cache_entry * const bfd_und_symbol;
#define bfd_get_section_size_after_reloc(section) \
((section)->reloc_done ? (section)->_cooked_size \
: (abort (), (bfd_size_type) 1))
+
+/* Macros to handle insertion and deletion of a bfd's sections. These
+ only handle the list pointers, ie. do not adjust section_count,
+ target_index etc. */
+#define bfd_section_list_remove(ABFD, PS) \
+ do \
+ { \
+ asection **_ps = PS; \
+ asection *_s = *_ps; \
+ *_ps = _s->next; \
+ if (_s->next == NULL) \
+ (ABFD)->section_tail = _ps; \
+ } \
+ while (0)
+#define bfd_section_list_insert(ABFD, PS, S) \
+ do \
+ { \
+ asection **_ps = PS; \
+ asection *_s = S; \
+ _s->next = *_ps; \
+ *_ps = _s; \
+ if (_s->next == NULL) \
+ (ABFD)->section_tail = &_s->next; \
+ } \
+ while (0)
+
+void
+bfd_section_list_clear PARAMS ((bfd *));
+
asection *
bfd_get_section_by_name PARAMS ((bfd *abfd, const char *name));
+char *
+bfd_get_unique_section_name PARAMS ((bfd *abfd,
+ const char *templat,
+ int *count));
+
asection *
bfd_make_section_old_way PARAMS ((bfd *abfd, const char *name));
asection *
bfd_make_section PARAMS ((bfd *, const char *name));
-boolean
+boolean
bfd_set_section_flags PARAMS ((bfd *abfd, asection *sec, flagword flags));
-void
+void
bfd_map_over_sections PARAMS ((bfd *abfd,
- void (*func)(bfd *abfd,
+ void (*func) (bfd *abfd,
asection *sect,
PTR obj),
PTR obj));
-boolean
+boolean
bfd_set_section_size PARAMS ((bfd *abfd, asection *sec, bfd_size_type val));
-boolean
-bfd_set_section_contents
- PARAMS ((bfd *abfd,
- asection *section,
- PTR data,
- file_ptr offset,
+boolean
+bfd_set_section_contents PARAMS ((bfd *abfd, asection *section,
+ PTR data, file_ptr offset,
bfd_size_type count));
-boolean
-bfd_get_section_contents
- PARAMS ((bfd *abfd, asection *section, PTR location,
- file_ptr offset, bfd_size_type count));
+boolean
+bfd_get_section_contents PARAMS ((bfd *abfd, asection *section,
+ PTR location, file_ptr offset,
+ bfd_size_type count));
-boolean
-bfd_copy_private_section_data PARAMS ((bfd *ibfd, asection *isec, bfd *obfd, asection *osec));
+boolean
+bfd_copy_private_section_data PARAMS ((bfd *ibfd, asection *isec,
+ bfd *obfd, asection *osec));
#define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
BFD_SEND (obfd, _bfd_copy_private_section_data, \
(ibfd, isection, obfd, osection))
-void
-_bfd_strip_section_from_output
- PARAMS ((struct bfd_link_info *info, asection *section));
+void
+_bfd_strip_section_from_output PARAMS ((struct bfd_link_info *info, asection *section));
-enum bfd_architecture
+enum bfd_architecture
{
- bfd_arch_unknown, /* File arch not known */
- bfd_arch_obscure, /* Arch known, not one of these */
+ bfd_arch_unknown, /* File arch not known. */
+ bfd_arch_obscure, /* Arch known, not one of these. */
bfd_arch_m68k, /* Motorola 68xxx */
#define bfd_mach_m68000 1
#define bfd_mach_m68008 2
#define bfd_mach_m68040 6
#define bfd_mach_m68060 7
#define bfd_mach_cpu32 8
- bfd_arch_vax, /* DEC Vax */
+#define bfd_mach_mcf5200 9
+#define bfd_mach_mcf5206e 10
+#define bfd_mach_mcf5307 11
+#define bfd_mach_mcf5407 12
+ bfd_arch_vax, /* DEC Vax */
bfd_arch_i960, /* Intel 960 */
/* The order of the following is important.
- lower number indicates a machine type that
+ lower number indicates a machine type that
only accepts a subset of the instructions
available to machines with higher numbers.
The exception is the "ca", which is
- incompatible with all other machines except
- "core". */
+ incompatible with all other machines except
+ "core". */
#define bfd_mach_i960_core 1
#define bfd_mach_i960_ka_sa 2
#define bfd_mach_i960_jx 7
#define bfd_mach_i960_hx 8
+ bfd_arch_or32, /* OpenRISC 32 */
+
bfd_arch_a29k, /* AMD 29000 */
bfd_arch_sparc, /* SPARC */
#define bfd_mach_sparc 1
#define bfd_mach_sparc_sparclet 2
#define bfd_mach_sparc_sparclite 3
#define bfd_mach_sparc_v8plus 4
-#define bfd_mach_sparc_v8plusa 5 /* with ultrasparc add'ns */
+#define bfd_mach_sparc_v8plusa 5 /* with ultrasparc add'ns. */
#define bfd_mach_sparc_sparclite_le 6
#define bfd_mach_sparc_v9 7
-#define bfd_mach_sparc_v9a 8 /* with ultrasparc add'ns */
+#define bfd_mach_sparc_v9a 8 /* with ultrasparc add'ns. */
+#define bfd_mach_sparc_v8plusb 9 /* with cheetah add'ns. */
+#define bfd_mach_sparc_v9b 10 /* with cheetah add'ns. */
/* Nonzero if MACH has the v9 instruction set. */
#define bfd_mach_sparc_v9_p(mach) \
- ((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9a)
+ ((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9b \
+ && (mach) != bfd_mach_sparc_sparclite_le)
bfd_arch_mips, /* MIPS Rxxxx */
#define bfd_mach_mips3000 3000
#define bfd_mach_mips3900 3900
#define bfd_mach_mips6000 6000
#define bfd_mach_mips8000 8000
#define bfd_mach_mips10000 10000
+#define bfd_mach_mips12000 12000
#define bfd_mach_mips16 16
+#define bfd_mach_mips5 5
+#define bfd_mach_mips_sb1 12310201 /* octal 'SB', 01 */
+#define bfd_mach_mipsisa32 32
+#define bfd_mach_mipsisa64 64
bfd_arch_i386, /* Intel 386 */
#define bfd_mach_i386_i386 0
#define bfd_mach_i386_i8086 1
#define bfd_mach_i386_i386_intel_syntax 2
+#define bfd_mach_x86_64 3
+#define bfd_mach_x86_64_intel_syntax 4
bfd_arch_we32k, /* AT&T WE32xxx */
bfd_arch_tahoe, /* CCI/Harris Tahoe */
bfd_arch_i860, /* Intel 860 */
#define bfd_mach_h8300 1
#define bfd_mach_h8300h 2
#define bfd_mach_h8300s 3
+ bfd_arch_pdp11, /* DEC PDP-11 */
bfd_arch_powerpc, /* PowerPC */
#define bfd_mach_ppc 0
+#define bfd_mach_ppc64 1
#define bfd_mach_ppc_403 403
#define bfd_mach_ppc_403gc 4030
#define bfd_mach_ppc_505 505
#define bfd_mach_sh3_dsp 0x3d
#define bfd_mach_sh3e 0x3e
#define bfd_mach_sh4 0x40
+#define bfd_mach_sh5 0x50
bfd_arch_alpha, /* Dec Alpha */
#define bfd_mach_alpha_ev4 0x10
#define bfd_mach_alpha_ev5 0x20
#define bfd_mach_alpha_ev6 0x30
- bfd_arch_arm, /* Advanced Risc Machines ARM */
+ bfd_arch_arm, /* Advanced Risc Machines ARM. */
#define bfd_mach_arm_2 1
#define bfd_mach_arm_2a 2
#define bfd_mach_arm_3 3
#define bfd_mach_arm_4T 6
#define bfd_mach_arm_5 7
#define bfd_mach_arm_5T 8
+#define bfd_mach_arm_5TE 9
+#define bfd_mach_arm_XScale 10
bfd_arch_ns32k, /* National Semiconductors ns32000 */
bfd_arch_w65, /* WDC 65816 */
bfd_arch_tic30, /* Texas Instruments TMS320C30 */
#define bfd_mach_v850 0
#define bfd_mach_v850e 'E'
#define bfd_mach_v850ea 'A'
- bfd_arch_arc, /* Argonaut RISC Core */
-#define bfd_mach_arc_base 0
+ bfd_arch_arc, /* ARC Cores */
+#define bfd_mach_arc_5 0
+#define bfd_mach_arc_6 1
+#define bfd_mach_arc_7 2
+#define bfd_mach_arc_8 3
bfd_arch_m32r, /* Mitsubishi M32R/D */
-#define bfd_mach_m32r 0 /* backwards compatibility */
+#define bfd_mach_m32r 0 /* For backwards compatibility. */
#define bfd_mach_m32rx 'x'
bfd_arch_mn10200, /* Matsushita MN10200 */
bfd_arch_mn10300, /* Matsushita MN10300 */
#define bfd_mach_fr30 0x46523330
bfd_arch_mcore,
bfd_arch_ia64, /* HP/Intel ia64 */
+#define bfd_mach_ia64_elf64 0
+#define bfd_mach_ia64_elf32 1
bfd_arch_pj,
- bfd_arch_avr, /* Atmel AVR microcontrollers */
+ bfd_arch_avr, /* Atmel AVR microcontrollers. */
#define bfd_mach_avr1 1
#define bfd_mach_avr2 2
#define bfd_mach_avr3 3
#define bfd_mach_avr4 4
#define bfd_mach_avr5 5
+ bfd_arch_cris, /* Axis CRIS */
+ bfd_arch_s390, /* IBM s390 */
+#define bfd_mach_s390_31 0
+#define bfd_mach_s390_64 1
+ bfd_arch_openrisc, /* OpenRISC */
+ bfd_arch_mmix, /* Donald Knuth's educational processor. */
+ bfd_arch_xstormy16,
+#define bfd_mach_xstormy16 0
bfd_arch_last
};
-typedef struct bfd_arch_info
+typedef struct bfd_arch_info
{
int bits_per_word;
int bits_per_address;
const char *arch_name;
const char *printable_name;
unsigned int section_align_power;
- /* True if this is the default machine for the architecture. */
- boolean the_default;
+ /* True if this is the default machine for the architecture.
+ The default arch should be the first entry for an arch so that
+ all the entries for that arch can be accessed via <<next>>. */
+ boolean the_default;
const struct bfd_arch_info * (*compatible)
PARAMS ((const struct bfd_arch_info *a,
const struct bfd_arch_info *b));
boolean (*scan) PARAMS ((const struct bfd_arch_info *, const char *));
const struct bfd_arch_info *next;
-} bfd_arch_info_type;
+}
+bfd_arch_info_type;
+
const char *
bfd_printable_name PARAMS ((bfd *abfd));
const bfd *abfd,
const bfd *bbfd));
-void
+void
bfd_set_arch_info PARAMS ((bfd *abfd, const bfd_arch_info_type *arg));
-enum bfd_architecture
+enum bfd_architecture
bfd_get_arch PARAMS ((bfd *abfd));
-unsigned long
+unsigned long
bfd_get_mach PARAMS ((bfd *abfd));
-unsigned int
+unsigned int
bfd_arch_bits_per_byte PARAMS ((bfd *abfd));
-unsigned int
+unsigned int
bfd_arch_bits_per_address PARAMS ((bfd *abfd));
-const bfd_arch_info_type *
+const bfd_arch_info_type *
bfd_get_arch_info PARAMS ((bfd *abfd));
const bfd_arch_info_type *
-bfd_lookup_arch
- PARAMS ((enum bfd_architecture
+bfd_lookup_arch PARAMS ((enum bfd_architecture
arch,
unsigned long machine));
const char *
-bfd_printable_arch_mach
- PARAMS ((enum bfd_architecture arch, unsigned long machine));
+bfd_printable_arch_mach PARAMS ((enum bfd_architecture arch, unsigned long machine));
-unsigned int
+unsigned int
bfd_octets_per_byte PARAMS ((bfd *abfd));
-unsigned int
+unsigned int
bfd_arch_mach_octets_per_byte PARAMS ((enum bfd_architecture arch,
unsigned long machine));
typedef enum bfd_reloc_status
{
- /* No errors detected */
+ /* No errors detected. */
bfd_reloc_ok,
- /* The relocation was performed, but there was an overflow. */
+ /* The relocation was performed, but there was an overflow. */
bfd_reloc_overflow,
- /* The address to relocate was not within the section supplied. */
+ /* The address to relocate was not within the section supplied. */
bfd_reloc_outofrange,
- /* Used by special functions */
+ /* Used by special functions. */
bfd_reloc_continue,
- /* Unsupported relocation size requested. */
+ /* Unsupported relocation size requested. */
bfd_reloc_notsupported,
- /* Unused */
+ /* Unused. */
bfd_reloc_other,
- /* The symbol to relocate against was undefined. */
+ /* The symbol to relocate against was undefined. */
bfd_reloc_undefined,
- /* The relocation was performed, but may not be ok - presently
- generated only when linking i960 coff files with i960 b.out
- symbols. If this type is returned, the error_message argument
- to bfd_perform_relocation will be set. */
+ /* The relocation was performed, but may not be ok - presently
+ generated only when linking i960 coff files with i960 b.out
+ symbols. If this type is returned, the error_message argument
+ to bfd_perform_relocation will be set. */
bfd_reloc_dangerous
}
bfd_reloc_status_type;
typedef struct reloc_cache_entry
{
- /* A pointer into the canonical table of pointers */
+ /* A pointer into the canonical table of pointers. */
struct symbol_cache_entry **sym_ptr_ptr;
- /* offset in section */
+ /* offset in section. */
bfd_size_type address;
- /* addend for relocation value */
+ /* addend for relocation value. */
bfd_vma addend;
- /* Pointer to how to perform the required relocation */
+ /* Pointer to how to perform the required relocation. */
reloc_howto_type *howto;
-} arelent;
+}
+arelent;
+
enum complain_overflow
{
- /* Do not complain on overflow. */
+ /* Do not complain on overflow. */
complain_overflow_dont,
- /* Complain if the bitfield overflows, whether it is considered
- as signed or unsigned. */
+ /* Complain if the bitfield overflows, whether it is considered
+ as signed or unsigned. */
complain_overflow_bitfield,
- /* Complain if the value overflows when considered as signed
- number. */
+ /* Complain if the value overflows when considered as signed
+ number. */
complain_overflow_signed,
- /* Complain if the value overflows when considered as an
- unsigned number. */
+ /* Complain if the value overflows when considered as an
+ unsigned number. */
complain_overflow_unsigned
};
struct reloc_howto_struct
{
- /* The type field has mainly a documentary use - the back end can
- do what it wants with it, though normally the back end's
- external idea of what a reloc number is stored
- in this field. For example, a PC relative word relocation
- in a coff environment has the type 023 - because that's
- what the outside world calls a R_PCRWORD reloc. */
+ /* The type field has mainly a documentary use - the back end can
+ do what it wants with it, though normally the back end's
+ external idea of what a reloc number is stored
+ in this field. For example, a PC relative word relocation
+ in a coff environment has the type 023 - because that's
+ what the outside world calls a R_PCRWORD reloc. */
unsigned int type;
- /* The value the final relocation is shifted right by. This drops
- unwanted data from the relocation. */
+ /* The value the final relocation is shifted right by. This drops
+ unwanted data from the relocation. */
unsigned int rightshift;
- /* The size of the item to be relocated. This is *not* a
- power-of-two measure. To get the number of bytes operated
- on by a type of relocation, use bfd_get_reloc_size. */
+ /* The size of the item to be relocated. This is *not* a
+ power-of-two measure. To get the number of bytes operated
+ on by a type of relocation, use bfd_get_reloc_size. */
int size;
- /* The number of bits in the item to be relocated. This is used
- when doing overflow checking. */
+ /* The number of bits in the item to be relocated. This is used
+ when doing overflow checking. */
unsigned int bitsize;
- /* Notes that the relocation is relative to the location in the
- data section of the addend. The relocation function will
- subtract from the relocation value the address of the location
- being relocated. */
+ /* Notes that the relocation is relative to the location in the
+ data section of the addend. The relocation function will
+ subtract from the relocation value the address of the location
+ being relocated. */
boolean pc_relative;
- /* The bit position of the reloc value in the destination.
- The relocated value is left shifted by this amount. */
+ /* The bit position of the reloc value in the destination.
+ The relocated value is left shifted by this amount. */
unsigned int bitpos;
- /* What type of overflow error should be checked for when
- relocating. */
+ /* What type of overflow error should be checked for when
+ relocating. */
enum complain_overflow complain_on_overflow;
- /* If this field is non null, then the supplied function is
- called rather than the normal function. This allows really
- strange relocation methods to be accomodated (e.g., i960 callj
- instructions). */
+ /* If this field is non null, then the supplied function is
+ called rather than the normal function. This allows really
+ strange relocation methods to be accomodated (e.g., i960 callj
+ instructions). */
bfd_reloc_status_type (*special_function)
- PARAMS ((bfd *abfd,
- arelent *reloc_entry,
- struct symbol_cache_entry *symbol,
- PTR data,
- asection *input_section,
- bfd *output_bfd,
- char **error_message));
-
- /* The textual name of the relocation type. */
+ PARAMS ((bfd *, arelent *, struct symbol_cache_entry *, PTR, asection *,
+ bfd *, char **));
+
+ /* The textual name of the relocation type. */
char *name;
- /* Some formats record a relocation addend in the section contents
- rather than with the relocation. For ELF formats this is the
- distinction between USE_REL and USE_RELA (though the code checks
- for USE_REL == 1/0). The value of this field is TRUE if the
- addend is recorded with the section contents; when performing a
- partial link (ld -r) the section contents (the data) will be
- modified. The value of this field is FALSE if addends are
- recorded with the relocation (in arelent.addend); when performing
- a partial link the relocation will be modified.
- All relocations for all ELF USE_RELA targets should set this field
- to FALSE (values of TRUE should be looked on with suspicion).
- However, the converse is not true: not all relocations of all ELF
- USE_REL targets set this field to TRUE. Why this is so is peculiar
- to each particular target. For relocs that aren't used in partial
- links (e.g. GOT stuff) it doesn't matter what this is set to. */
+ /* Some formats record a relocation addend in the section contents
+ rather than with the relocation. For ELF formats this is the
+ distinction between USE_REL and USE_RELA (though the code checks
+ for USE_REL == 1/0). The value of this field is TRUE if the
+ addend is recorded with the section contents; when performing a
+ partial link (ld -r) the section contents (the data) will be
+ modified. The value of this field is FALSE if addends are
+ recorded with the relocation (in arelent.addend); when performing
+ a partial link the relocation will be modified.
+ All relocations for all ELF USE_RELA targets should set this field
+ to FALSE (values of TRUE should be looked on with suspicion).
+ However, the converse is not true: not all relocations of all ELF
+ USE_REL targets set this field to TRUE. Why this is so is peculiar
+ to each particular target. For relocs that aren't used in partial
+ links (e.g. GOT stuff) it doesn't matter what this is set to. */
boolean partial_inplace;
- /* The src_mask selects which parts of the read in data
- are to be used in the relocation sum. E.g., if this was an 8 bit
- byte of data which we read and relocated, this would be
- 0x000000ff. When we have relocs which have an addend, such as
- sun4 extended relocs, the value in the offset part of a
- relocating field is garbage so we never use it. In this case
- the mask would be 0x00000000. */
+ /* The src_mask selects which parts of the read in data
+ are to be used in the relocation sum. E.g., if this was an 8 bit
+ byte of data which we read and relocated, this would be
+ 0x000000ff. When we have relocs which have an addend, such as
+ sun4 extended relocs, the value in the offset part of a
+ relocating field is garbage so we never use it. In this case
+ the mask would be 0x00000000. */
bfd_vma src_mask;
- /* The dst_mask selects which parts of the instruction are replaced
- into the instruction. In most cases src_mask == dst_mask,
- except in the above special case, where dst_mask would be
- 0x000000ff, and src_mask would be 0x00000000. */
+ /* The dst_mask selects which parts of the instruction are replaced
+ into the instruction. In most cases src_mask == dst_mask,
+ except in the above special case, where dst_mask would be
+ 0x000000ff, and src_mask would be 0x00000000. */
bfd_vma dst_mask;
- /* When some formats create PC relative instructions, they leave
- the value of the pc of the place being relocated in the offset
- slot of the instruction, so that a PC relative relocation can
- be made just by adding in an ordinary offset (e.g., sun3 a.out).
- Some formats leave the displacement part of an instruction
- empty (e.g., m88k bcs); this flag signals the fact.*/
+ /* When some formats create PC relative instructions, they leave
+ the value of the pc of the place being relocated in the offset
+ slot of the instruction, so that a PC relative relocation can
+ be made just by adding in an ordinary offset (e.g., sun3 a.out).
+ Some formats leave the displacement part of an instruction
+ empty (e.g., m88k bcs); this flag signals the fact. */
boolean pcrel_offset;
-
};
-#define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
- {(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
-#define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
+
+#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
+ { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
+#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
+ HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
+ NAME, false, 0, 0, IN)
#define EMPTY_HOWTO(C) \
- HOWTO((C),0,0,0,false,0,complain_overflow_dont,NULL,NULL,false,0,0,false)
-
-#define HOWTO_PREPARE(relocation, symbol) \
- { \
- if (symbol != (asymbol *)NULL) { \
- if (bfd_is_com_section (symbol->section)) { \
- relocation = 0; \
- } \
- else { \
- relocation = symbol->value; \
- } \
- } \
+ HOWTO ((C), 0, 0, 0, false, 0, complain_overflow_dont, NULL, \
+ NULL, false, 0, 0, false)
+
+#define HOWTO_PREPARE(relocation, symbol) \
+ { \
+ if (symbol != (asymbol *) NULL) \
+ { \
+ if (bfd_is_com_section (symbol->section)) \
+ { \
+ relocation = 0; \
+ } \
+ else \
+ { \
+ relocation = symbol->value; \
+ } \
+ } \
+ }
+
+unsigned int
+bfd_get_reloc_size PARAMS ((reloc_howto_type *));
+
+typedef struct relent_chain
+{
+ arelent relent;
+ struct relent_chain *next;
}
-unsigned int
-bfd_get_reloc_size PARAMS ((reloc_howto_type *));
+arelent_chain;
-typedef struct relent_chain {
- arelent relent;
- struct relent_chain *next;
-} arelent_chain;
bfd_reloc_status_type
-
-bfd_check_overflow
- PARAMS ((enum complain_overflow how,
+bfd_check_overflow PARAMS ((enum complain_overflow how,
unsigned int bitsize,
unsigned int rightshift,
unsigned int addrsize,
bfd_vma relocation));
bfd_reloc_status_type
-
-bfd_perform_relocation
- PARAMS ((bfd *abfd,
+bfd_perform_relocation PARAMS ((bfd *abfd,
arelent *reloc_entry,
PTR data,
asection *input_section,
char **error_message));
bfd_reloc_status_type
-
-bfd_install_relocation
- PARAMS ((bfd *abfd,
+bfd_install_relocation PARAMS ((bfd *abfd,
arelent *reloc_entry,
PTR data, bfd_vma data_start,
asection *input_section,
_dummy_first_bfd_reloc_code_real,
-/* Basic absolute relocations of N bits. */
+/* Basic absolute relocations of N bits. */
BFD_RELOC_64,
BFD_RELOC_32,
BFD_RELOC_26,
of the relocation itself; sometimes they are relative to the start of
the section containing the relocation. It depends on the specific target.
-The 24-bit relocation is used in some Intel 960 configurations. */
+The 24-bit relocation is used in some Intel 960 configurations. */
BFD_RELOC_64_PCREL,
BFD_RELOC_32_PCREL,
BFD_RELOC_24_PCREL,
BFD_RELOC_12_PCREL,
BFD_RELOC_8_PCREL,
-/* For ELF. */
+/* For ELF. */
BFD_RELOC_32_GOT_PCREL,
BFD_RELOC_16_GOT_PCREL,
BFD_RELOC_8_GOT_PCREL,
BFD_RELOC_HI16_GOTOFF,
BFD_RELOC_HI16_S_GOTOFF,
BFD_RELOC_8_GOTOFF,
+ BFD_RELOC_64_PLT_PCREL,
BFD_RELOC_32_PLT_PCREL,
BFD_RELOC_24_PLT_PCREL,
BFD_RELOC_16_PLT_PCREL,
BFD_RELOC_8_PLT_PCREL,
+ BFD_RELOC_64_PLTOFF,
BFD_RELOC_32_PLTOFF,
BFD_RELOC_16_PLTOFF,
BFD_RELOC_LO16_PLTOFF,
BFD_RELOC_HI16_S_PLTOFF,
BFD_RELOC_8_PLTOFF,
-/* Relocations used by 68K ELF. */
+/* Relocations used by 68K ELF. */
BFD_RELOC_68K_GLOB_DAT,
BFD_RELOC_68K_JMP_SLOT,
BFD_RELOC_68K_RELATIVE,
-/* Linkage-table relative. */
+/* Linkage-table relative. */
BFD_RELOC_32_BASEREL,
BFD_RELOC_16_BASEREL,
BFD_RELOC_LO16_BASEREL,
BFD_RELOC_8_BASEREL,
BFD_RELOC_RVA,
-/* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */
+/* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */
BFD_RELOC_8_FFnn,
/* These PC-relative relocations are stored as word displacements --
displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
signed 16-bit displacement is used on the MIPS, and the 23-bit
-displacement is used on the Alpha. */
+displacement is used on the Alpha. */
BFD_RELOC_32_PCREL_S2,
BFD_RELOC_16_PCREL_S2,
BFD_RELOC_23_PCREL_S2,
/* High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
-the target word. These are used on the SPARC. */
+the target word. These are used on the SPARC. */
BFD_RELOC_HI22,
BFD_RELOC_LO10,
/* For systems that allocate a Global Pointer register, these are
displacements off that register. These relocation types are
handled specially, because the value the register will have is
-decided relatively late. */
+decided relatively late. */
BFD_RELOC_GPREL16,
BFD_RELOC_GPREL32,
-/* Reloc types used for i960/b.out. */
+/* Reloc types used for i960/b.out. */
BFD_RELOC_I960_CALLJ,
/* SPARC ELF relocations. There is probably some overlap with other
-relocation types already defined. */
+relocation types already defined. */
BFD_RELOC_NONE,
BFD_RELOC_SPARC_WDISP22,
BFD_RELOC_SPARC22,
BFD_RELOC_SPARC_GLOB_DAT,
BFD_RELOC_SPARC_JMP_SLOT,
BFD_RELOC_SPARC_RELATIVE,
+ BFD_RELOC_SPARC_UA16,
BFD_RELOC_SPARC_UA32,
+ BFD_RELOC_SPARC_UA64,
-/* I think these are specific to SPARC a.out (e.g., Sun 4). */
+/* I think these are specific to SPARC a.out (e.g., Sun 4). */
BFD_RELOC_SPARC_BASE13,
BFD_RELOC_SPARC_BASE22,
-/* SPARC64 relocations */
+/* SPARC64 relocations */
#define BFD_RELOC_SPARC_64 BFD_RELOC_64
BFD_RELOC_SPARC_10,
BFD_RELOC_SPARC_11,
BFD_RELOC_SPARC_6,
BFD_RELOC_SPARC_5,
#define BFD_RELOC_SPARC_DISP64 BFD_RELOC_64_PCREL
+ BFD_RELOC_SPARC_PLT32,
BFD_RELOC_SPARC_PLT64,
BFD_RELOC_SPARC_HIX22,
BFD_RELOC_SPARC_LOX10,
BFD_RELOC_SPARC_L44,
BFD_RELOC_SPARC_REGISTER,
-/* SPARC little endian relocation */
+/* SPARC little endian relocation */
BFD_RELOC_SPARC_REV32,
/* Alpha ECOFF and ELF relocations. Some of these treat the symbol or
For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
writing; when reading, it will be the absolute section symbol. The
addend is the displacement in bytes of the "lda" instruction from
-the "ldah" instruction (which is at the address of this reloc). */
+the "ldah" instruction (which is at the address of this reloc). */
BFD_RELOC_ALPHA_GPDISP_HI16,
/* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
with GPDISP_HI16 relocs. The addend is ignored when writing the
relocations out, and is filled in with the file's GP value on
-reading, for convenience. */
+reading, for convenience. */
BFD_RELOC_ALPHA_GPDISP_LO16,
/* The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
relocation except that there is no accompanying GPDISP_LO16
-relocation. */
+relocation. */
BFD_RELOC_ALPHA_GPDISP,
/* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
of instruction using the register:
1 - "memory" fmt insn
2 - byte-manipulation (byte offset reg)
-3 - jsr (target of branch)
-
-The GNU linker currently doesn't do any of this optimizing. */
+3 - jsr (target of branch) */
BFD_RELOC_ALPHA_LITERAL,
BFD_RELOC_ALPHA_ELF_LITERAL,
BFD_RELOC_ALPHA_LITUSE,
-/* The BFD_RELOC_ALPHA_USER_* relocations are used by the assembler to
-process the explicit !<reloc>!sequence relocations, and are mapped
-into the normal relocations at the end of processing. */
- BFD_RELOC_ALPHA_USER_LITERAL,
- BFD_RELOC_ALPHA_USER_LITUSE_BASE,
- BFD_RELOC_ALPHA_USER_LITUSE_BYTOFF,
- BFD_RELOC_ALPHA_USER_LITUSE_JSR,
- BFD_RELOC_ALPHA_USER_GPDISP,
- BFD_RELOC_ALPHA_USER_GPRELHIGH,
- BFD_RELOC_ALPHA_USER_GPRELLOW,
-
/* The HINT relocation indicates a value that should be filled into the
"hint" field of a jmp/jsr/ret instruction, for possible branch-
-prediction logic which may be provided on some processors. */
+prediction logic which may be provided on some processors. */
BFD_RELOC_ALPHA_HINT,
/* The LINKAGE relocation outputs a linkage pair in the object file,
-which is filled by the linker. */
+which is filled by the linker. */
BFD_RELOC_ALPHA_LINKAGE,
/* The CODEADDR relocation outputs a STO_CA in the object file,
-which is filled by the linker. */
+which is filled by the linker. */
BFD_RELOC_ALPHA_CODEADDR,
+/* The GPREL_HI/LO relocations together form a 32-bit offset from the
+GP register. */
+ BFD_RELOC_ALPHA_GPREL_HI16,
+ BFD_RELOC_ALPHA_GPREL_LO16,
+
+/* Like BFD_RELOC_23_PCREL_S2, except that the source and target must
+share a common GP, and the target address is adjusted for
+STO_ALPHA_STD_GPLOAD. */
+ BFD_RELOC_ALPHA_BRSGP,
+
/* Bits 27..2 of the relocation address shifted right 2 bits;
-simple reloc otherwise. */
+simple reloc otherwise. */
BFD_RELOC_MIPS_JMP,
-/* The MIPS16 jump instruction. */
+/* The MIPS16 jump instruction. */
BFD_RELOC_MIPS16_JMP,
-/* MIPS16 GP relative reloc. */
+/* MIPS16 GP relative reloc. */
BFD_RELOC_MIPS16_GPREL,
-/* High 16 bits of 32-bit value; simple reloc. */
+/* High 16 bits of 32-bit value; simple reloc. */
BFD_RELOC_HI16,
/* High 16 bits of 32-bit value but the low 16 bits will be sign
extended and added to form the final result. If the low 16
bits form a negative number, we need to add one to the high value
-to compensate for the borrow when the low bits are added. */
+to compensate for the borrow when the low bits are added. */
BFD_RELOC_HI16_S,
-/* Low 16 bits. */
+/* Low 16 bits. */
BFD_RELOC_LO16,
-/* Like BFD_RELOC_HI16_S, but PC relative. */
+/* Like BFD_RELOC_HI16_S, but PC relative. */
BFD_RELOC_PCREL_HI16_S,
-/* Like BFD_RELOC_LO16, but PC relative. */
+/* Like BFD_RELOC_LO16, but PC relative. */
BFD_RELOC_PCREL_LO16,
-/* Relocation relative to the global pointer. */
-#define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16
-
-/* Relocation against a MIPS literal section. */
+/* Relocation against a MIPS literal section. */
BFD_RELOC_MIPS_LITERAL,
-/* MIPS ELF relocations. */
+/* MIPS ELF relocations. */
BFD_RELOC_MIPS_GOT16,
BFD_RELOC_MIPS_CALL16,
-#define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32
BFD_RELOC_MIPS_GOT_HI16,
BFD_RELOC_MIPS_GOT_LO16,
BFD_RELOC_MIPS_CALL_HI16,
BFD_RELOC_MIPS_GOT_PAGE,
BFD_RELOC_MIPS_GOT_OFST,
BFD_RELOC_MIPS_GOT_DISP,
-
-
-/* i386/elf relocations */
+ BFD_RELOC_MIPS_SHIFT5,
+ BFD_RELOC_MIPS_SHIFT6,
+ BFD_RELOC_MIPS_INSERT_A,
+ BFD_RELOC_MIPS_INSERT_B,
+ BFD_RELOC_MIPS_DELETE,
+ BFD_RELOC_MIPS_HIGHEST,
+ BFD_RELOC_MIPS_HIGHER,
+ BFD_RELOC_MIPS_SCN_DISP,
+ BFD_RELOC_MIPS_REL16,
+ BFD_RELOC_MIPS_RELGOT,
+ BFD_RELOC_MIPS_JALR,
+
+
+/* i386/elf relocations */
BFD_RELOC_386_GOT32,
BFD_RELOC_386_PLT32,
BFD_RELOC_386_COPY,
BFD_RELOC_386_GOTOFF,
BFD_RELOC_386_GOTPC,
-/* ns32k relocations */
+/* x86-64/elf relocations */
+ BFD_RELOC_X86_64_GOT32,
+ BFD_RELOC_X86_64_PLT32,
+ BFD_RELOC_X86_64_COPY,
+ BFD_RELOC_X86_64_GLOB_DAT,
+ BFD_RELOC_X86_64_JUMP_SLOT,
+ BFD_RELOC_X86_64_RELATIVE,
+ BFD_RELOC_X86_64_GOTPCREL,
+ BFD_RELOC_X86_64_32S,
+
+/* ns32k relocations */
BFD_RELOC_NS32K_IMM_8,
BFD_RELOC_NS32K_IMM_16,
BFD_RELOC_NS32K_IMM_32,
BFD_RELOC_NS32K_DISP_16_PCREL,
BFD_RELOC_NS32K_DISP_32_PCREL,
-/* Picojava relocs. Not all of these appear in object files. */
+/* PDP11 relocations */
+ BFD_RELOC_PDP11_DISP_8_PCREL,
+ BFD_RELOC_PDP11_DISP_6_PCREL,
+
+/* Picojava relocs. Not all of these appear in object files. */
BFD_RELOC_PJ_CODE_HI16,
BFD_RELOC_PJ_CODE_LO16,
BFD_RELOC_PJ_CODE_DIR16,
BFD_RELOC_PJ_CODE_REL16,
BFD_RELOC_PJ_CODE_REL32,
-/* Power(rs6000) and PowerPC relocations. */
+/* Power(rs6000) and PowerPC relocations. */
BFD_RELOC_PPC_B26,
BFD_RELOC_PPC_BA26,
BFD_RELOC_PPC_TOC16,
BFD_RELOC_PPC_EMB_RELST_HA,
BFD_RELOC_PPC_EMB_BIT_FLD,
BFD_RELOC_PPC_EMB_RELSDA,
-
-/* IBM 370/390 relocations */
+ BFD_RELOC_PPC64_HIGHER,
+ BFD_RELOC_PPC64_HIGHER_S,
+ BFD_RELOC_PPC64_HIGHEST,
+ BFD_RELOC_PPC64_HIGHEST_S,
+ BFD_RELOC_PPC64_TOC16_LO,
+ BFD_RELOC_PPC64_TOC16_HI,
+ BFD_RELOC_PPC64_TOC16_HA,
+ BFD_RELOC_PPC64_TOC,
+ BFD_RELOC_PPC64_PLTGOT16,
+ BFD_RELOC_PPC64_PLTGOT16_LO,
+ BFD_RELOC_PPC64_PLTGOT16_HI,
+ BFD_RELOC_PPC64_PLTGOT16_HA,
+ BFD_RELOC_PPC64_ADDR16_DS,
+ BFD_RELOC_PPC64_ADDR16_LO_DS,
+ BFD_RELOC_PPC64_GOT16_DS,
+ BFD_RELOC_PPC64_GOT16_LO_DS,
+ BFD_RELOC_PPC64_PLT16_LO_DS,
+ BFD_RELOC_PPC64_SECTOFF_DS,
+ BFD_RELOC_PPC64_SECTOFF_LO_DS,
+ BFD_RELOC_PPC64_TOC16_DS,
+ BFD_RELOC_PPC64_TOC16_LO_DS,
+ BFD_RELOC_PPC64_PLTGOT16_DS,
+ BFD_RELOC_PPC64_PLTGOT16_LO_DS,
+
+/* IBM 370/390 relocations */
BFD_RELOC_I370_D12,
/* The type of reloc used to build a contructor table - at the moment
probably a 32 bit wide absolute relocation, but the target can choose.
-It generally does map to one of the other relocation types. */
+It generally does map to one of the other relocation types. */
BFD_RELOC_CTOR,
/* ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
-not stored in the instruction. */
+not stored in the instruction. */
BFD_RELOC_ARM_PCREL_BRANCH,
/* ARM 26 bit pc-relative branch. The lowest bit must be zero and is
not stored in the instruction. The 2nd lowest bit comes from a 1 bit
-field in the instruction. */
+field in the instruction. */
BFD_RELOC_ARM_PCREL_BLX,
/* Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
not stored in the instruction. The 2nd lowest bit comes from a 1 bit
-field in the instruction. */
+field in the instruction. */
BFD_RELOC_THUMB_PCREL_BLX,
/* These relocs are only used within the ARM assembler. They are not
-(at present) written to any object files. */
+(at present) written to any object files. */
BFD_RELOC_ARM_IMMEDIATE,
BFD_RELOC_ARM_ADRL_IMMEDIATE,
BFD_RELOC_ARM_OFFSET_IMM,
BFD_RELOC_ARM_GOTOFF,
BFD_RELOC_ARM_GOTPC,
-/* Hitachi SH relocs. Not all of these appear in object files. */
+/* Hitachi SH relocs. Not all of these appear in object files. */
BFD_RELOC_SH_PCDISP8BY2,
BFD_RELOC_SH_PCDISP12BY2,
BFD_RELOC_SH_IMM4,
BFD_RELOC_SH_LABEL,
BFD_RELOC_SH_LOOP_START,
BFD_RELOC_SH_LOOP_END,
+ BFD_RELOC_SH_COPY,
+ BFD_RELOC_SH_GLOB_DAT,
+ BFD_RELOC_SH_JMP_SLOT,
+ BFD_RELOC_SH_RELATIVE,
+ BFD_RELOC_SH_GOTPC,
+ BFD_RELOC_SH_GOT_LOW16,
+ BFD_RELOC_SH_GOT_MEDLOW16,
+ BFD_RELOC_SH_GOT_MEDHI16,
+ BFD_RELOC_SH_GOT_HI16,
+ BFD_RELOC_SH_GOTPLT_LOW16,
+ BFD_RELOC_SH_GOTPLT_MEDLOW16,
+ BFD_RELOC_SH_GOTPLT_MEDHI16,
+ BFD_RELOC_SH_GOTPLT_HI16,
+ BFD_RELOC_SH_PLT_LOW16,
+ BFD_RELOC_SH_PLT_MEDLOW16,
+ BFD_RELOC_SH_PLT_MEDHI16,
+ BFD_RELOC_SH_PLT_HI16,
+ BFD_RELOC_SH_GOTOFF_LOW16,
+ BFD_RELOC_SH_GOTOFF_MEDLOW16,
+ BFD_RELOC_SH_GOTOFF_MEDHI16,
+ BFD_RELOC_SH_GOTOFF_HI16,
+ BFD_RELOC_SH_GOTPC_LOW16,
+ BFD_RELOC_SH_GOTPC_MEDLOW16,
+ BFD_RELOC_SH_GOTPC_MEDHI16,
+ BFD_RELOC_SH_GOTPC_HI16,
+ BFD_RELOC_SH_COPY64,
+ BFD_RELOC_SH_GLOB_DAT64,
+ BFD_RELOC_SH_JMP_SLOT64,
+ BFD_RELOC_SH_RELATIVE64,
+ BFD_RELOC_SH_GOT10BY4,
+ BFD_RELOC_SH_GOT10BY8,
+ BFD_RELOC_SH_GOTPLT10BY4,
+ BFD_RELOC_SH_GOTPLT10BY8,
+ BFD_RELOC_SH_GOTPLT32,
+ BFD_RELOC_SH_SHMEDIA_CODE,
+ BFD_RELOC_SH_IMMU5,
+ BFD_RELOC_SH_IMMS6,
+ BFD_RELOC_SH_IMMS6BY32,
+ BFD_RELOC_SH_IMMU6,
+ BFD_RELOC_SH_IMMS10,
+ BFD_RELOC_SH_IMMS10BY2,
+ BFD_RELOC_SH_IMMS10BY4,
+ BFD_RELOC_SH_IMMS10BY8,
+ BFD_RELOC_SH_IMMS16,
+ BFD_RELOC_SH_IMMU16,
+ BFD_RELOC_SH_IMM_LOW16,
+ BFD_RELOC_SH_IMM_LOW16_PCREL,
+ BFD_RELOC_SH_IMM_MEDLOW16,
+ BFD_RELOC_SH_IMM_MEDLOW16_PCREL,
+ BFD_RELOC_SH_IMM_MEDHI16,
+ BFD_RELOC_SH_IMM_MEDHI16_PCREL,
+ BFD_RELOC_SH_IMM_HI16,
+ BFD_RELOC_SH_IMM_HI16_PCREL,
+ BFD_RELOC_SH_PT_16,
/* Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must
-be zero and is not stored in the instruction. */
+be zero and is not stored in the instruction. */
BFD_RELOC_THUMB_PCREL_BRANCH9,
BFD_RELOC_THUMB_PCREL_BRANCH12,
BFD_RELOC_THUMB_PCREL_BRANCH23,
-/* Argonaut RISC Core (ARC) relocs.
+/* ARC Cores relocs.
ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
not stored in the instruction. The high 20 bits are installed in bits 26
-through 7 of the instruction. */
+through 7 of the instruction. */
BFD_RELOC_ARC_B22_PCREL,
/* ARC 26 bit absolute branch. The lowest two bits must be zero and are not
stored in the instruction. The high 24 bits are installed in bits 23
-through 0. */
+through 0. */
BFD_RELOC_ARC_B26,
/* Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
-assumed to be 0. */
+assumed to be 0. */
BFD_RELOC_D10V_10_PCREL_R,
/* Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
assumed to be 0. This is the same as the previous reloc
except it is in the left container, i.e.,
-shifted left 15 bits. */
+shifted left 15 bits. */
BFD_RELOC_D10V_10_PCREL_L,
/* This is an 18-bit reloc with the right 2 bits
-assumed to be 0. */
+assumed to be 0. */
BFD_RELOC_D10V_18,
/* This is an 18-bit reloc with the right 2 bits
-assumed to be 0. */
+assumed to be 0. */
BFD_RELOC_D10V_18_PCREL,
/* Mitsubishi D30V relocs.
-This is a 6-bit absolute reloc. */
+This is a 6-bit absolute reloc. */
BFD_RELOC_D30V_6,
/* This is a 6-bit pc-relative reloc with
-the right 3 bits assumed to be 0. */
+the right 3 bits assumed to be 0. */
BFD_RELOC_D30V_9_PCREL,
/* This is a 6-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
-of the container. */
+of the container. */
BFD_RELOC_D30V_9_PCREL_R,
/* This is a 12-bit absolute reloc with the
-right 3 bitsassumed to be 0. */
+right 3 bitsassumed to be 0. */
BFD_RELOC_D30V_15,
/* This is a 12-bit pc-relative reloc with
-the right 3 bits assumed to be 0. */
+the right 3 bits assumed to be 0. */
BFD_RELOC_D30V_15_PCREL,
/* This is a 12-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
-of the container. */
+of the container. */
BFD_RELOC_D30V_15_PCREL_R,
/* This is an 18-bit absolute reloc with
-the right 3 bits assumed to be 0. */
+the right 3 bits assumed to be 0. */
BFD_RELOC_D30V_21,
/* This is an 18-bit pc-relative reloc with
-the right 3 bits assumed to be 0. */
+the right 3 bits assumed to be 0. */
BFD_RELOC_D30V_21_PCREL,
/* This is an 18-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
-of the container. */
+of the container. */
BFD_RELOC_D30V_21_PCREL_R,
-/* This is a 32-bit absolute reloc. */
+/* This is a 32-bit absolute reloc. */
BFD_RELOC_D30V_32,
-/* This is a 32-bit pc-relative reloc. */
+/* This is a 32-bit pc-relative reloc. */
BFD_RELOC_D30V_32_PCREL,
/* Mitsubishi M32R relocs.
-This is a 24 bit absolute address. */
+This is a 24 bit absolute address. */
BFD_RELOC_M32R_24,
-/* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */
+/* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */
BFD_RELOC_M32R_10_PCREL,
-/* This is an 18-bit reloc with the right 2 bits assumed to be 0. */
+/* This is an 18-bit reloc with the right 2 bits assumed to be 0. */
BFD_RELOC_M32R_18_PCREL,
-/* This is a 26-bit reloc with the right 2 bits assumed to be 0. */
+/* This is a 26-bit reloc with the right 2 bits assumed to be 0. */
BFD_RELOC_M32R_26_PCREL,
/* This is a 16-bit reloc containing the high 16 bits of an address
-used when the lower 16 bits are treated as unsigned. */
+used when the lower 16 bits are treated as unsigned. */
BFD_RELOC_M32R_HI16_ULO,
/* This is a 16-bit reloc containing the high 16 bits of an address
-used when the lower 16 bits are treated as signed. */
+used when the lower 16 bits are treated as signed. */
BFD_RELOC_M32R_HI16_SLO,
-/* This is a 16-bit reloc containing the lower 16 bits of an address. */
+/* This is a 16-bit reloc containing the lower 16 bits of an address. */
BFD_RELOC_M32R_LO16,
/* This is a 16-bit reloc containing the small data area offset for use in
-add3, load, and store instructions. */
+add3, load, and store instructions. */
BFD_RELOC_M32R_SDA16,
-/* This is a 9-bit reloc */
+/* This is a 9-bit reloc */
BFD_RELOC_V850_9_PCREL,
-/* This is a 22-bit reloc */
+/* This is a 22-bit reloc */
BFD_RELOC_V850_22_PCREL,
-/* This is a 16 bit offset from the short data area pointer. */
+/* This is a 16 bit offset from the short data area pointer. */
BFD_RELOC_V850_SDA_16_16_OFFSET,
/* This is a 16 bit offset (of which only 15 bits are used) from the
-short data area pointer. */
+short data area pointer. */
BFD_RELOC_V850_SDA_15_16_OFFSET,
-/* This is a 16 bit offset from the zero data area pointer. */
+/* This is a 16 bit offset from the zero data area pointer. */
BFD_RELOC_V850_ZDA_16_16_OFFSET,
/* This is a 16 bit offset (of which only 15 bits are used) from the
-zero data area pointer. */
+zero data area pointer. */
BFD_RELOC_V850_ZDA_15_16_OFFSET,
/* This is an 8 bit offset (of which only 6 bits are used) from the
-tiny data area pointer. */
+tiny data area pointer. */
BFD_RELOC_V850_TDA_6_8_OFFSET,
/* This is an 8bit offset (of which only 7 bits are used) from the tiny
-data area pointer. */
+data area pointer. */
BFD_RELOC_V850_TDA_7_8_OFFSET,
-/* This is a 7 bit offset from the tiny data area pointer. */
+/* This is a 7 bit offset from the tiny data area pointer. */
BFD_RELOC_V850_TDA_7_7_OFFSET,
-/* This is a 16 bit offset from the tiny data area pointer. */
+/* This is a 16 bit offset from the tiny data area pointer. */
BFD_RELOC_V850_TDA_16_16_OFFSET,
/* This is a 5 bit offset (of which only 4 bits are used) from the tiny
-data area pointer. */
+data area pointer. */
BFD_RELOC_V850_TDA_4_5_OFFSET,
-/* This is a 4 bit offset from the tiny data area pointer. */
+/* This is a 4 bit offset from the tiny data area pointer. */
BFD_RELOC_V850_TDA_4_4_OFFSET,
/* This is a 16 bit offset from the short data area pointer, with the
-bits placed non-contigously in the instruction. */
+bits placed non-contigously in the instruction. */
BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET,
/* This is a 16 bit offset from the zero data area pointer, with the
-bits placed non-contigously in the instruction. */
+bits placed non-contigously in the instruction. */
BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET,
-/* This is a 6 bit offset from the call table base pointer. */
+/* This is a 6 bit offset from the call table base pointer. */
BFD_RELOC_V850_CALLT_6_7_OFFSET,
-/* This is a 16 bit offset from the call table base pointer. */
+/* This is a 16 bit offset from the call table base pointer. */
BFD_RELOC_V850_CALLT_16_16_OFFSET,
/* This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
-instruction. */
+instruction. */
BFD_RELOC_MN10300_32_PCREL,
/* This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
-instruction. */
+instruction. */
BFD_RELOC_MN10300_16_PCREL,
/* This is a 8bit DP reloc for the tms320c30, where the most
significant 8 bits of a 24 bit word are placed into the least
-significant 8 bits of the opcode. */
+significant 8 bits of the opcode. */
BFD_RELOC_TIC30_LDP,
/* This is a 7bit reloc for the tms320c54x, where the least
significant 7 bits of a 16 bit word are placed into the least
-significant 7 bits of the opcode. */
+significant 7 bits of the opcode. */
BFD_RELOC_TIC54X_PARTLS7,
/* This is a 9bit DP reloc for the tms320c54x, where the most
significant 9 bits of a 16 bit word are placed into the least
-significant 9 bits of the opcode. */
+significant 9 bits of the opcode. */
BFD_RELOC_TIC54X_PARTMS9,
-/* This is an extended address 23-bit reloc for the tms320c54x. */
+/* This is an extended address 23-bit reloc for the tms320c54x. */
BFD_RELOC_TIC54X_23,
-/* This is a 16-bit reloc for the tms320c54x, where the least
-significant 16 bits of a 23-bit extended address are placed into
-the opcode. */
+/* This is a 16-bit reloc for the tms320c54x, where the least
+significant 16 bits of a 23-bit extended address are placed into
+the opcode. */
BFD_RELOC_TIC54X_16_OF_23,
/* This is a reloc for the tms320c54x, where the most
-significant 7 bits of a 23-bit extended address are placed into
-the opcode. */
+significant 7 bits of a 23-bit extended address are placed into
+the opcode. */
BFD_RELOC_TIC54X_MS7_OF_23,
-/* This is a 48 bit reloc for the FR30 that stores 32 bits. */
+/* This is a 48 bit reloc for the FR30 that stores 32 bits. */
BFD_RELOC_FR30_48,
/* This is a 32 bit reloc for the FR30 that stores 20 bits split up into
-two sections. */
+two sections. */
BFD_RELOC_FR30_20,
/* This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
-4 bits. */
+4 bits. */
BFD_RELOC_FR30_6_IN_4,
/* This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
-into 8 bits. */
+into 8 bits. */
BFD_RELOC_FR30_8_IN_8,
/* This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
-into 8 bits. */
+into 8 bits. */
BFD_RELOC_FR30_9_IN_8,
/* This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
-into 8 bits. */
+into 8 bits. */
BFD_RELOC_FR30_10_IN_8,
/* This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
-short offset into 8 bits. */
+short offset into 8 bits. */
BFD_RELOC_FR30_9_PCREL,
/* This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
-short offset into 11 bits. */
+short offset into 11 bits. */
BFD_RELOC_FR30_12_PCREL,
-/* Motorola Mcore relocations. */
+/* Motorola Mcore relocations. */
BFD_RELOC_MCORE_PCREL_IMM8BY4,
BFD_RELOC_MCORE_PCREL_IMM11BY2,
BFD_RELOC_MCORE_PCREL_IMM4BY2,
BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2,
BFD_RELOC_MCORE_RVA,
+/* These are relocations for the GETA instruction. */
+ BFD_RELOC_MMIX_GETA,
+ BFD_RELOC_MMIX_GETA_1,
+ BFD_RELOC_MMIX_GETA_2,
+ BFD_RELOC_MMIX_GETA_3,
+
+/* These are relocations for a conditional branch instruction. */
+ BFD_RELOC_MMIX_CBRANCH,
+ BFD_RELOC_MMIX_CBRANCH_J,
+ BFD_RELOC_MMIX_CBRANCH_1,
+ BFD_RELOC_MMIX_CBRANCH_2,
+ BFD_RELOC_MMIX_CBRANCH_3,
+
+/* These are relocations for the PUSHJ instruction. */
+ BFD_RELOC_MMIX_PUSHJ,
+ BFD_RELOC_MMIX_PUSHJ_1,
+ BFD_RELOC_MMIX_PUSHJ_2,
+ BFD_RELOC_MMIX_PUSHJ_3,
+
+/* These are relocations for the JMP instruction. */
+ BFD_RELOC_MMIX_JMP,
+ BFD_RELOC_MMIX_JMP_1,
+ BFD_RELOC_MMIX_JMP_2,
+ BFD_RELOC_MMIX_JMP_3,
+
+/* This is a relocation for a relative address as in a GETA instruction or
+a branch. */
+ BFD_RELOC_MMIX_ADDR19,
+
+/* This is a relocation for a relative address as in a JMP instruction. */
+ BFD_RELOC_MMIX_ADDR27,
+
+/* This is a relocation for an instruction field that may be a general
+register or a value 0..255. */
+ BFD_RELOC_MMIX_REG_OR_BYTE,
+
+/* This is a relocation for an instruction field that may be a general
+register. */
+ BFD_RELOC_MMIX_REG,
+
+/* This is a relocation for two instruction fields holding a register and
+an offset, the equivalent of the relocation. */
+ BFD_RELOC_MMIX_BASE_PLUS_OFFSET,
+
+/* This relocation is an assertion that the expression is not allocated as
+a global register. It does not modify contents. */
+ BFD_RELOC_MMIX_LOCAL,
+
/* This is a 16 bit reloc for the AVR that stores 8 bit pc relative
-short offset into 7 bits. */
+short offset into 7 bits. */
BFD_RELOC_AVR_7_PCREL,
/* This is a 16 bit reloc for the AVR that stores 13 bit pc relative
-short offset into 12 bits. */
+short offset into 12 bits. */
BFD_RELOC_AVR_13_PCREL,
/* This is a 16 bit reloc for the AVR that stores 17 bit value (usually
-program memory address) into 16 bits. */
+program memory address) into 16 bits. */
BFD_RELOC_AVR_16_PM,
/* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
-data memory address) into 8 bit immediate value of LDI insn. */
+data memory address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_LO8_LDI,
/* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
-of data memory address) into 8 bit immediate value of LDI insn. */
+of data memory address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_HI8_LDI,
/* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
-of program memory address) into 8 bit immediate value of LDI insn. */
+of program memory address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_HH8_LDI,
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
-(usually data memory address) into 8 bit immediate value of SUBI insn. */
+(usually data memory address) into 8 bit immediate value of SUBI insn. */
BFD_RELOC_AVR_LO8_LDI_NEG,
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
(high 8 bit of data memory address) into 8 bit immediate value of
-SUBI insn. */
+SUBI insn. */
BFD_RELOC_AVR_HI8_LDI_NEG,
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
(most high 8 bit of program memory address) into 8 bit immediate value
-of LDI or SUBI insn. */
+of LDI or SUBI insn. */
BFD_RELOC_AVR_HH8_LDI_NEG,
/* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
-command address) into 8 bit immediate value of LDI insn. */
+command address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_LO8_LDI_PM,
/* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
-of command address) into 8 bit immediate value of LDI insn. */
+of command address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_HI8_LDI_PM,
/* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
-of command address) into 8 bit immediate value of LDI insn. */
+of command address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_HH8_LDI_PM,
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
-(usually command address) into 8 bit immediate value of SUBI insn. */
+(usually command address) into 8 bit immediate value of SUBI insn. */
BFD_RELOC_AVR_LO8_LDI_PM_NEG,
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
(high 8 bit of 16 bit command address) into 8 bit immediate value
-of SUBI insn. */
+of SUBI insn. */
BFD_RELOC_AVR_HI8_LDI_PM_NEG,
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
(high 6 bit of 22 bit command address) into 8 bit immediate
-value of SUBI insn. */
+value of SUBI insn. */
BFD_RELOC_AVR_HH8_LDI_PM_NEG,
/* This is a 32 bit reloc for the AVR that stores 23 bit value
-into 22 bits. */
+into 22 bits. */
BFD_RELOC_AVR_CALL,
+/* Direct 12 bit. */
+ BFD_RELOC_390_12,
+
+/* 12 bit GOT offset. */
+ BFD_RELOC_390_GOT12,
+
+/* 32 bit PC relative PLT address. */
+ BFD_RELOC_390_PLT32,
+
+/* Copy symbol at runtime. */
+ BFD_RELOC_390_COPY,
+
+/* Create GOT entry. */
+ BFD_RELOC_390_GLOB_DAT,
+
+/* Create PLT entry. */
+ BFD_RELOC_390_JMP_SLOT,
+
+/* Adjust by program base. */
+ BFD_RELOC_390_RELATIVE,
+
+/* 32 bit PC relative offset to GOT. */
+ BFD_RELOC_390_GOTPC,
+
+/* 16 bit GOT offset. */
+ BFD_RELOC_390_GOT16,
+
+/* PC relative 16 bit shifted by 1. */
+ BFD_RELOC_390_PC16DBL,
+
+/* 16 bit PC rel. PLT shifted by 1. */
+ BFD_RELOC_390_PLT16DBL,
+
+/* PC relative 32 bit shifted by 1. */
+ BFD_RELOC_390_PC32DBL,
+
+/* 32 bit PC rel. PLT shifted by 1. */
+ BFD_RELOC_390_PLT32DBL,
+
+/* 32 bit PC rel. GOT shifted by 1. */
+ BFD_RELOC_390_GOTPCDBL,
+
+/* 64 bit GOT offset. */
+ BFD_RELOC_390_GOT64,
+
+/* 64 bit PC relative PLT address. */
+ BFD_RELOC_390_PLT64,
+
+/* 32 bit rel. offset to GOT entry. */
+ BFD_RELOC_390_GOTENT,
+
/* These two relocations are used by the linker to determine which of
the entries in a C++ virtual function table are actually used. When
the --gc-sections option is given, the linker will zero out the entries
table of the class mentioned in the code. Off of that base, an offset
describes the entry that is being used. For Rela hosts, this offset
is stored in the reloc's addend. For Rel hosts, we are forced to put
-this offset in the reloc's section offset. */
+this offset in the reloc's section offset. */
BFD_RELOC_VTABLE_INHERIT,
BFD_RELOC_VTABLE_ENTRY,
-/* Intel IA64 Relocations. */
+/* Intel IA64 Relocations. */
BFD_RELOC_IA64_IMM14,
BFD_RELOC_IA64_IMM22,
BFD_RELOC_IA64_IMM64,
BFD_RELOC_IA64_PCREL64LSB,
BFD_RELOC_IA64_LTOFF_FPTR22,
BFD_RELOC_IA64_LTOFF_FPTR64I,
+ BFD_RELOC_IA64_LTOFF_FPTR32MSB,
+ BFD_RELOC_IA64_LTOFF_FPTR32LSB,
BFD_RELOC_IA64_LTOFF_FPTR64MSB,
BFD_RELOC_IA64_LTOFF_FPTR64LSB,
- BFD_RELOC_IA64_SEGBASE,
BFD_RELOC_IA64_SEGREL32MSB,
BFD_RELOC_IA64_SEGREL32LSB,
BFD_RELOC_IA64_SEGREL64MSB,
BFD_RELOC_IA64_LTV64LSB,
BFD_RELOC_IA64_IPLTMSB,
BFD_RELOC_IA64_IPLTLSB,
- BFD_RELOC_IA64_EPLTMSB,
- BFD_RELOC_IA64_EPLTLSB,
BFD_RELOC_IA64_COPY,
BFD_RELOC_IA64_TPREL22,
BFD_RELOC_IA64_TPREL64MSB,
BFD_RELOC_IA64_LDXMOV,
/* Motorola 68HC11 reloc.
-This is the 8 bits high part of an absolute address. */
+This is the 8 bits high part of an absolute address. */
BFD_RELOC_M68HC11_HI8,
/* Motorola 68HC11 reloc.
-This is the 8 bits low part of an absolute address. */
+This is the 8 bits low part of an absolute address. */
BFD_RELOC_M68HC11_LO8,
/* Motorola 68HC11 reloc.
-This is the 3 bits of a value. */
+This is the 3 bits of a value. */
BFD_RELOC_M68HC11_3B,
+
+/* These relocs are only used within the CRIS assembler. They are not
+(at present) written to any object files. */
+ BFD_RELOC_CRIS_BDISP8,
+ BFD_RELOC_CRIS_UNSIGNED_5,
+ BFD_RELOC_CRIS_SIGNED_6,
+ BFD_RELOC_CRIS_UNSIGNED_6,
+ BFD_RELOC_CRIS_UNSIGNED_4,
+
+/* Relocs used in ELF shared libraries for CRIS. */
+ BFD_RELOC_CRIS_COPY,
+ BFD_RELOC_CRIS_GLOB_DAT,
+ BFD_RELOC_CRIS_JUMP_SLOT,
+ BFD_RELOC_CRIS_RELATIVE,
+
+/* 32-bit offset to symbol-entry within GOT. */
+ BFD_RELOC_CRIS_32_GOT,
+
+/* 16-bit offset to symbol-entry within GOT. */
+ BFD_RELOC_CRIS_16_GOT,
+
+/* 32-bit offset to symbol-entry within GOT, with PLT handling. */
+ BFD_RELOC_CRIS_32_GOTPLT,
+
+/* 16-bit offset to symbol-entry within GOT, with PLT handling. */
+ BFD_RELOC_CRIS_16_GOTPLT,
+
+/* 32-bit offset to symbol, relative to GOT. */
+ BFD_RELOC_CRIS_32_GOTREL,
+
+/* 32-bit offset to symbol with PLT entry, relative to GOT. */
+ BFD_RELOC_CRIS_32_PLT_GOTREL,
+
+/* 32-bit offset to symbol with PLT entry, relative to this relocation. */
+ BFD_RELOC_CRIS_32_PLT_PCREL,
+
+/* Intel i860 Relocations. */
+ BFD_RELOC_860_COPY,
+ BFD_RELOC_860_GLOB_DAT,
+ BFD_RELOC_860_JUMP_SLOT,
+ BFD_RELOC_860_RELATIVE,
+ BFD_RELOC_860_PC26,
+ BFD_RELOC_860_PLT26,
+ BFD_RELOC_860_PC16,
+ BFD_RELOC_860_LOW0,
+ BFD_RELOC_860_SPLIT0,
+ BFD_RELOC_860_LOW1,
+ BFD_RELOC_860_SPLIT1,
+ BFD_RELOC_860_LOW2,
+ BFD_RELOC_860_SPLIT2,
+ BFD_RELOC_860_LOW3,
+ BFD_RELOC_860_LOGOT0,
+ BFD_RELOC_860_SPGOT0,
+ BFD_RELOC_860_LOGOT1,
+ BFD_RELOC_860_SPGOT1,
+ BFD_RELOC_860_LOGOTOFF0,
+ BFD_RELOC_860_SPGOTOFF0,
+ BFD_RELOC_860_LOGOTOFF1,
+ BFD_RELOC_860_SPGOTOFF1,
+ BFD_RELOC_860_LOGOTOFF2,
+ BFD_RELOC_860_LOGOTOFF3,
+ BFD_RELOC_860_LOPC,
+ BFD_RELOC_860_HIGHADJ,
+ BFD_RELOC_860_HAGOT,
+ BFD_RELOC_860_HAGOTOFF,
+ BFD_RELOC_860_HAPC,
+ BFD_RELOC_860_HIGH,
+ BFD_RELOC_860_HIGOT,
+ BFD_RELOC_860_HIGOTOFF,
+
+/* OpenRISC Relocations. */
+ BFD_RELOC_OPENRISC_ABS_26,
+ BFD_RELOC_OPENRISC_REL_26,
+
+/* H8 elf Relocations. */
+ BFD_RELOC_H8_DIR16A8,
+ BFD_RELOC_H8_DIR16R8,
+ BFD_RELOC_H8_DIR24A8,
+ BFD_RELOC_H8_DIR24R8,
+ BFD_RELOC_H8_DIR32A16,
+
+/* Sony Xstormy16 Relocations. */
+ BFD_RELOC_XSTORMY16_REL_12,
+ BFD_RELOC_XSTORMY16_24,
+ BFD_RELOC_XSTORMY16_FPTR16,
BFD_RELOC_UNUSED };
typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
reloc_howto_type *
-
-bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code));
+bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code));
const char *
-bfd_get_reloc_code_name PARAMS ((bfd_reloc_code_real_type code));
+bfd_get_reloc_code_name PARAMS ((bfd_reloc_code_real_type code));
typedef struct symbol_cache_entry
{
- /* A pointer to the BFD which owns the symbol. This information
- is necessary so that a back end can work out what additional
- information (invisible to the application writer) is carried
- with the symbol.
-
- This field is *almost* redundant, since you can use section->owner
- instead, except that some symbols point to the global sections
- bfd_{abs,com,und}_section. This could be fixed by making
- these globals be per-bfd (or per-target-flavor). FIXME. */
-
- struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */
-
- /* The text of the symbol. The name is left alone, and not copied; the
- application may not alter it. */
- CONST char *name;
+ /* A pointer to the BFD which owns the symbol. This information
+ is necessary so that a back end can work out what additional
+ information (invisible to the application writer) is carried
+ with the symbol.
+
+ This field is *almost* redundant, since you can use section->owner
+ instead, except that some symbols point to the global sections
+ bfd_{abs,com,und}_section. This could be fixed by making
+ these globals be per-bfd (or per-target-flavor). FIXME. */
+ struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */
+
+ /* The text of the symbol. The name is left alone, and not copied; the
+ application may not alter it. */
+ const char *name;
- /* The value of the symbol. This really should be a union of a
- numeric value with a pointer, since some flags indicate that
- a pointer to another symbol is stored here. */
+ /* The value of the symbol. This really should be a union of a
+ numeric value with a pointer, since some flags indicate that
+ a pointer to another symbol is stored here. */
symvalue value;
- /* Attributes of a symbol: */
-
+ /* Attributes of a symbol. */
#define BSF_NO_FLAGS 0x00
- /* The symbol has local scope; <<static>> in <<C>>. The value
- is the offset into the section of the data. */
+ /* The symbol has local scope; <<static>> in <<C>>. The value
+ is the offset into the section of the data. */
#define BSF_LOCAL 0x01
- /* The symbol has global scope; initialized data in <<C>>. The
- value is the offset into the section of the data. */
+ /* The symbol has global scope; initialized data in <<C>>. The
+ value is the offset into the section of the data. */
#define BSF_GLOBAL 0x02
- /* The symbol has global scope and is exported. The value is
- the offset into the section of the data. */
-#define BSF_EXPORT BSF_GLOBAL /* no real difference */
+ /* The symbol has global scope and is exported. The value is
+ the offset into the section of the data. */
+#define BSF_EXPORT BSF_GLOBAL /* No real difference. */
- /* A normal C symbol would be one of:
- <<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
- <<BSF_GLOBAL>> */
+ /* A normal C symbol would be one of:
+ <<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
+ <<BSF_GLOBAL>>. */
- /* The symbol is a debugging record. The value has an arbitary
- meaning, unless BSF_DEBUGGING_RELOC is also set. */
+ /* The symbol is a debugging record. The value has an arbitary
+ meaning, unless BSF_DEBUGGING_RELOC is also set. */
#define BSF_DEBUGGING 0x08
- /* The symbol denotes a function entry point. Used in ELF,
- perhaps others someday. */
+ /* The symbol denotes a function entry point. Used in ELF,
+ perhaps others someday. */
#define BSF_FUNCTION 0x10
- /* Used by the linker. */
+ /* Used by the linker. */
#define BSF_KEEP 0x20
#define BSF_KEEP_G 0x40
- /* A weak global symbol, overridable without warnings by
- a regular global symbol of the same name. */
+ /* A weak global symbol, overridable without warnings by
+ a regular global symbol of the same name. */
#define BSF_WEAK 0x80
- /* This symbol was created to point to a section, e.g. ELF's
- STT_SECTION symbols. */
+ /* This symbol was created to point to a section, e.g. ELF's
+ STT_SECTION symbols. */
#define BSF_SECTION_SYM 0x100
- /* The symbol used to be a common symbol, but now it is
- allocated. */
+ /* The symbol used to be a common symbol, but now it is
+ allocated. */
#define BSF_OLD_COMMON 0x200
- /* The default value for common data. */
+ /* The default value for common data. */
#define BFD_FORT_COMM_DEFAULT_VALUE 0
- /* In some files the type of a symbol sometimes alters its
- location in an output file - ie in coff a <<ISFCN>> symbol
- which is also <<C_EXT>> symbol appears where it was
- declared and not at the end of a section. This bit is set
- by the target BFD part to convey this information. */
-
+ /* In some files the type of a symbol sometimes alters its
+ location in an output file - ie in coff a <<ISFCN>> symbol
+ which is also <<C_EXT>> symbol appears where it was
+ declared and not at the end of a section. This bit is set
+ by the target BFD part to convey this information. */
#define BSF_NOT_AT_END 0x400
- /* Signal that the symbol is the label of constructor section. */
+ /* Signal that the symbol is the label of constructor section. */
#define BSF_CONSTRUCTOR 0x800
- /* Signal that the symbol is a warning symbol. The name is a
- warning. The name of the next symbol is the one to warn about;
- if a reference is made to a symbol with the same name as the next
- symbol, a warning is issued by the linker. */
+ /* Signal that the symbol is a warning symbol. The name is a
+ warning. The name of the next symbol is the one to warn about;
+ if a reference is made to a symbol with the same name as the next
+ symbol, a warning is issued by the linker. */
#define BSF_WARNING 0x1000
- /* Signal that the symbol is indirect. This symbol is an indirect
- pointer to the symbol with the same name as the next symbol. */
+ /* Signal that the symbol is indirect. This symbol is an indirect
+ pointer to the symbol with the same name as the next symbol. */
#define BSF_INDIRECT 0x2000
- /* BSF_FILE marks symbols that contain a file name. This is used
- for ELF STT_FILE symbols. */
+ /* BSF_FILE marks symbols that contain a file name. This is used
+ for ELF STT_FILE symbols. */
#define BSF_FILE 0x4000
- /* Symbol is from dynamic linking information. */
+ /* Symbol is from dynamic linking information. */
#define BSF_DYNAMIC 0x8000
- /* The symbol denotes a data object. Used in ELF, and perhaps
- others someday. */
+ /* The symbol denotes a data object. Used in ELF, and perhaps
+ others someday. */
#define BSF_OBJECT 0x10000
- /* This symbol is a debugging symbol. The value is the offset
- into the section of the data. BSF_DEBUGGING should be set
- as well. */
+ /* This symbol is a debugging symbol. The value is the offset
+ into the section of the data. BSF_DEBUGGING should be set
+ as well. */
#define BSF_DEBUGGING_RELOC 0x20000
flagword flags;
- /* A pointer to the section to which this symbol is
- relative. This will always be non NULL, there are special
- sections for undefined and absolute symbols. */
+ /* A pointer to the section to which this symbol is
+ relative. This will always be non NULL, there are special
+ sections for undefined and absolute symbols. */
struct sec *section;
- /* Back end special data. */
+ /* Back end special data. */
union
{
PTR p;
bfd_vma i;
- } udata;
+ }
+ udata;
+}
+asymbol;
-} asymbol;
#define bfd_get_symtab_upper_bound(abfd) \
BFD_SEND (abfd, _bfd_get_symtab_upper_bound, (abfd))
-boolean
+
+boolean
bfd_is_local_label PARAMS ((bfd *abfd, asymbol *sym));
-boolean
+boolean
bfd_is_local_label_name PARAMS ((bfd *abfd, const char *name));
#define bfd_is_local_label_name(abfd, name) \
BFD_SEND (abfd, _bfd_is_local_label_name, (abfd, name))
+
#define bfd_canonicalize_symtab(abfd, location) \
BFD_SEND (abfd, _bfd_canonicalize_symtab,\
(abfd, location))
-boolean
-bfd_set_symtab PARAMS ((bfd *abfd, asymbol **location, unsigned int count));
-void
-bfd_print_symbol_vandf PARAMS ((PTR file, asymbol *symbol));
+boolean
+bfd_set_symtab PARAMS ((bfd *abfd, asymbol **location, unsigned int count));
+
+void
+bfd_print_symbol_vandf PARAMS ((bfd *abfd, PTR file, asymbol *symbol));
#define bfd_make_empty_symbol(abfd) \
BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
+
+asymbol *
+_bfd_generic_make_empty_symbol PARAMS ((bfd *));
+
#define bfd_make_debug_symbol(abfd,ptr,size) \
BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size))
-int
+
+int
bfd_decode_symclass PARAMS ((asymbol *symbol));
-boolean
-bfd_is_undefined_symclass PARAMS ((int symclass));
+boolean
+bfd_is_undefined_symclass PARAMS ((int symclass));
-void
+void
bfd_symbol_info PARAMS ((asymbol *symbol, symbol_info *ret));
-boolean
+boolean
bfd_copy_private_symbol_data PARAMS ((bfd *ibfd, asymbol *isym, bfd *obfd, asymbol *osym));
#define bfd_copy_private_symbol_data(ibfd, isymbol, obfd, osymbol) \
BFD_SEND (obfd, _bfd_copy_private_symbol_data, \
(ibfd, isymbol, obfd, osymbol))
-struct _bfd
-{
- /* The filename the application opened the BFD with. */
- CONST char *filename;
-
- /* A pointer to the target jump table. */
- const struct bfd_target *xvec;
-
- /* To avoid dragging too many header files into every file that
- includes `<<bfd.h>>', IOSTREAM has been declared as a "char
- *", and MTIME as a "long". Their correct types, to which they
- are cast when used, are "FILE *" and "time_t". The iostream
- is the result of an fopen on the filename. However, if the
- BFD_IN_MEMORY flag is set, then iostream is actually a pointer
- to a bfd_in_memory struct. */
- PTR iostream;
-
- /* Is the file descriptor being cached? That is, can it be closed as
- needed, and re-opened when accessed later? */
-
- boolean cacheable;
-
- /* Marks whether there was a default target specified when the
- BFD was opened. This is used to select which matching algorithm
- to use to choose the back end. */
-
- boolean target_defaulted;
-
- /* The caching routines use these to maintain a
- least-recently-used list of BFDs */
- struct _bfd *lru_prev, *lru_next;
-
- /* When a file is closed by the caching routines, BFD retains
- state information on the file here: */
-
- file_ptr where;
-
- /* and here: (``once'' means at least once) */
-
- boolean opened_once;
+struct _bfd
+{
+ /* The filename the application opened the BFD with. */
+ const char *filename;
- /* Set if we have a locally maintained mtime value, rather than
- getting it from the file each time: */
+ /* A pointer to the target jump table. */
+ const struct bfd_target *xvec;
- boolean mtime_set;
+ /* To avoid dragging too many header files into every file that
+ includes `<<bfd.h>>', IOSTREAM has been declared as a "char *",
+ and MTIME as a "long". Their correct types, to which they
+ are cast when used, are "FILE *" and "time_t". The iostream
+ is the result of an fopen on the filename. However, if the
+ BFD_IN_MEMORY flag is set, then iostream is actually a pointer
+ to a bfd_in_memory struct. */
+ PTR iostream;
- /* File modified time, if mtime_set is true: */
+ /* Is the file descriptor being cached? That is, can it be closed as
+ needed, and re-opened when accessed later? */
+ boolean cacheable;
- long mtime;
+ /* Marks whether there was a default target specified when the
+ BFD was opened. This is used to select which matching algorithm
+ to use to choose the back end. */
+ boolean target_defaulted;
- /* Reserved for an unimplemented file locking extension.*/
+ /* The caching routines use these to maintain a
+ least-recently-used list of BFDs. */
+ struct _bfd *lru_prev, *lru_next;
- int ifd;
+ /* When a file is closed by the caching routines, BFD retains
+ state information on the file here... */
+ ufile_ptr where;
- /* The format which belongs to the BFD. (object, core, etc.) */
+ /* ... and here: (``once'' means at least once). */
+ boolean opened_once;
- bfd_format format;
+ /* Set if we have a locally maintained mtime value, rather than
+ getting it from the file each time. */
+ boolean mtime_set;
- /* The direction the BFD was opened with*/
+ /* File modified time, if mtime_set is true. */
+ long mtime;
- enum bfd_direction {no_direction = 0,
- read_direction = 1,
- write_direction = 2,
- both_direction = 3} direction;
+ /* Reserved for an unimplemented file locking extension. */
+ int ifd;
- /* Format_specific flags*/
+ /* The format which belongs to the BFD. (object, core, etc.) */
+ bfd_format format;
- flagword flags;
+ /* The direction with which the BFD was opened. */
+ enum bfd_direction
+ {
+ no_direction = 0,
+ read_direction = 1,
+ write_direction = 2,
+ both_direction = 3
+ }
+ direction;
+
+ /* Format_specific flags. */
+ flagword flags;
- /* Currently my_archive is tested before adding origin to
- anything. I believe that this can become always an add of
- origin, with origin set to 0 for non archive files. */
+ /* Currently my_archive is tested before adding origin to
+ anything. I believe that this can become always an add of
+ origin, with origin set to 0 for non archive files. */
+ ufile_ptr origin;
- file_ptr origin;
+ /* Remember when output has begun, to stop strange things
+ from happening. */
+ boolean output_has_begun;
- /* Remember when output has begun, to stop strange things
- from happening. */
- boolean output_has_begun;
+ /* A hash table for section names. */
+ struct bfd_hash_table section_htab;
- /* Pointer to linked list of sections*/
- struct sec *sections;
+ /* Pointer to linked list of sections. */
+ struct sec *sections;
- /* The number of sections */
- unsigned int section_count;
+ /* The place where we add to the section list. */
+ struct sec **section_tail;
- /* Stuff only useful for object files:
- The start address. */
- bfd_vma start_address;
+ /* The number of sections. */
+ unsigned int section_count;
- /* Used for input and output*/
- unsigned int symcount;
+ /* Stuff only useful for object files:
+ The start address. */
+ bfd_vma start_address;
- /* Symbol table for output BFD (with symcount entries) */
- struct symbol_cache_entry **outsymbols;
+ /* Used for input and output. */
+ unsigned int symcount;
- /* Pointer to structure which contains architecture information*/
- const struct bfd_arch_info *arch_info;
+ /* Symbol table for output BFD (with symcount entries). */
+ struct symbol_cache_entry **outsymbols;
- /* Stuff only useful for archives:*/
- PTR arelt_data;
- struct _bfd *my_archive; /* The containing archive BFD. */
- struct _bfd *next; /* The next BFD in the archive. */
- struct _bfd *archive_head; /* The first BFD in the archive. */
- boolean has_armap;
+ /* Pointer to structure which contains architecture information. */
+ const struct bfd_arch_info *arch_info;
- /* A chain of BFD structures involved in a link. */
- struct _bfd *link_next;
+ /* Stuff only useful for archives. */
+ PTR arelt_data;
+ struct _bfd *my_archive; /* The containing archive BFD. */
+ struct _bfd *next; /* The next BFD in the archive. */
+ struct _bfd *archive_head; /* The first BFD in the archive. */
+ boolean has_armap;
- /* A field used by _bfd_generic_link_add_archive_symbols. This will
- be used only for archive elements. */
- int archive_pass;
+ /* A chain of BFD structures involved in a link. */
+ struct _bfd *link_next;
- /* Used by the back end to hold private data. */
+ /* A field used by _bfd_generic_link_add_archive_symbols. This will
+ be used only for archive elements. */
+ int archive_pass;
- union
- {
+ /* Used by the back end to hold private data. */
+ union
+ {
struct aout_data_struct *aout_data;
struct artdata *aout_ar_data;
struct _oasys_data *oasys_obj_data;
struct elf_obj_tdata *elf_obj_data;
struct nlm_obj_tdata *nlm_obj_data;
struct bout_data_struct *bout_data;
+ struct mmo_data_struct *mmo_data;
struct sun_core_struct *sun_core_data;
struct sco5_core_struct *sco5_core_data;
struct trad_core_struct *trad_core_data;
struct versados_data_struct *versados_data;
struct netbsd_core_struct *netbsd_core_data;
PTR any;
- } tdata;
-
- /* Used by the application to hold private data*/
- PTR usrdata;
+ }
+ tdata;
+
+ /* Used by the application to hold private data. */
+ PTR usrdata;
/* Where all the allocated stuff under this BFD goes. This is a
struct objalloc *, but we use PTR to avoid requiring the inclusion of
objalloc.h. */
- PTR memory;
+ PTR memory;
};
typedef enum bfd_error
bfd_error_system_call,
bfd_error_invalid_target,
bfd_error_wrong_format,
+ bfd_error_wrong_object_format,
bfd_error_invalid_operation,
bfd_error_no_memory,
bfd_error_no_symbols,
bfd_error_file_truncated,
bfd_error_file_too_big,
bfd_error_invalid_error_code
-} bfd_error_type;
+}
+bfd_error_type;
-bfd_error_type
-bfd_get_error PARAMS ((void));
+bfd_error_type
+bfd_get_error PARAMS ((void));
-void
-bfd_set_error PARAMS ((bfd_error_type error_tag));
+void
+bfd_set_error PARAMS ((bfd_error_type error_tag));
-CONST char *
-bfd_errmsg PARAMS ((bfd_error_type error_tag));
+const char *
+bfd_errmsg PARAMS ((bfd_error_type error_tag));
-void
-bfd_perror PARAMS ((CONST char *message));
+void
+bfd_perror PARAMS ((const char *message));
typedef void (*bfd_error_handler_type) PARAMS ((const char *, ...));
-bfd_error_handler_type
-bfd_set_error_handler PARAMS ((bfd_error_handler_type));
+bfd_error_handler_type
+bfd_set_error_handler PARAMS ((bfd_error_handler_type));
+
+void
+bfd_set_error_program_name PARAMS ((const char *));
-void
-bfd_set_error_program_name PARAMS ((const char *));
+bfd_error_handler_type
+bfd_get_error_handler PARAMS ((void));
-bfd_error_handler_type
-bfd_get_error_handler PARAMS ((void));
+const char *
+bfd_archive_filename PARAMS ((bfd *));
-long
+long
bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect));
-long
-bfd_canonicalize_reloc
- PARAMS ((bfd *abfd,
+long
+bfd_canonicalize_reloc PARAMS ((bfd *abfd,
asection *sec,
arelent **loc,
asymbol **syms));
-void
-bfd_set_reloc
- PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count)
-
- );
+void
+bfd_set_reloc PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count));
-boolean
+boolean
bfd_set_file_flags PARAMS ((bfd *abfd, flagword flags));
-boolean
+int
+bfd_get_arch_size PARAMS ((bfd *abfd));
+
+int
+bfd_get_sign_extend_vma PARAMS ((bfd *abfd));
+
+boolean
bfd_set_start_address PARAMS ((bfd *abfd, bfd_vma vma));
-long
+long
bfd_get_mtime PARAMS ((bfd *abfd));
-long
+long
bfd_get_size PARAMS ((bfd *abfd));
-int
+unsigned int
bfd_get_gp_size PARAMS ((bfd *abfd));
-void
-bfd_set_gp_size PARAMS ((bfd *abfd, int i));
+void
+bfd_set_gp_size PARAMS ((bfd *abfd, unsigned int i));
-bfd_vma
-bfd_scan_vma PARAMS ((CONST char *string, CONST char **end, int base));
+bfd_vma
+bfd_scan_vma PARAMS ((const char *string, const char **end, int base));
-boolean
+boolean
bfd_copy_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
#define bfd_copy_private_bfd_data(ibfd, obfd) \
BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
(ibfd, obfd))
-boolean
+boolean
bfd_merge_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
#define bfd_merge_private_bfd_data(ibfd, obfd) \
BFD_SEND (obfd, _bfd_merge_private_bfd_data, \
(ibfd, obfd))
-boolean
+boolean
bfd_set_private_flags PARAMS ((bfd *abfd, flagword flags));
#define bfd_set_private_flags(abfd, flags) \
#define bfd_gc_sections(abfd, link_info) \
BFD_SEND (abfd, _bfd_gc_sections, (abfd, link_info))
+#define bfd_merge_sections(abfd, link_info) \
+ BFD_SEND (abfd, _bfd_merge_sections, (abfd, link_info))
+
#define bfd_link_hash_table_create(abfd) \
BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
+#define bfd_link_hash_table_free(abfd, hash) \
+ BFD_SEND (abfd, _bfd_link_hash_table_free, (hash))
+
#define bfd_link_add_symbols(abfd, info) \
BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
struct bfd_link_order *, bfd_byte *,
boolean, asymbol **));
-symindex
+boolean
+bfd_alt_mach_code PARAMS ((bfd *abfd, int index));
+
+symindex
bfd_get_next_mapent PARAMS ((bfd *abfd, symindex previous, carsym **sym));
-boolean
+boolean
bfd_set_archive_head PARAMS ((bfd *output, bfd *new_head));
bfd *
bfd_openr_next_archived_file PARAMS ((bfd *archive, bfd *previous));
-CONST char *
+const char *
bfd_core_file_failing_command PARAMS ((bfd *abfd));
-int
+int
bfd_core_file_failing_signal PARAMS ((bfd *abfd));
-boolean
-core_file_matches_executable_p
- PARAMS ((bfd *core_bfd, bfd *exec_bfd));
+boolean
+core_file_matches_executable_p PARAMS ((bfd *core_bfd, bfd *exec_bfd));
#define BFD_SEND(bfd, message, arglist) \
((*((bfd)->xvec->message)) arglist)
(bfd_assert (__FILE__,__LINE__), NULL))
#endif
#define BFD_SEND_FMT(bfd, message, arglist) \
- (((bfd)->xvec->message[(int)((bfd)->format)]) arglist)
+ (((bfd)->xvec->message[(int) ((bfd)->format)]) arglist)
#ifdef DEBUG_BFD_SEND
#undef BFD_SEND_FMT
#define BFD_SEND_FMT(bfd, message, arglist) \
(((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
- (((bfd)->xvec->message[(int)((bfd)->format)]) arglist) : \
+ (((bfd)->xvec->message[(int) ((bfd)->format)]) arglist) : \
(bfd_assert (__FILE__,__LINE__), NULL))
#endif
-enum bfd_flavour {
+
+enum bfd_flavour
+{
bfd_target_unknown_flavour,
bfd_target_aout_flavour,
bfd_target_coff_flavour,
bfd_target_versados_flavour,
bfd_target_msdos_flavour,
bfd_target_ovax_flavour,
- bfd_target_evax_flavour
+ bfd_target_evax_flavour,
+ bfd_target_mmo_flavour
};
enum bfd_endian { BFD_ENDIAN_BIG, BFD_ENDIAN_LITTLE, BFD_ENDIAN_UNKNOWN };
typedef struct bfd_target
{
+ /* Identifies the kind of target, e.g., SunOS4, Ultrix, etc. */
char *name;
+
+ /* The "flavour" of a back end is a general indication about
+ the contents of a file. */
enum bfd_flavour flavour;
+
+ /* The order of bytes within the data area of a file. */
enum bfd_endian byteorder;
+
+ /* The order of bytes within the header parts of a file. */
enum bfd_endian header_byteorder;
- flagword object_flags;
+
+ /* A mask of all the flags which an executable may have set -
+ from the set <<BFD_NO_FLAGS>>, <<HAS_RELOC>>, ...<<D_PAGED>>. */
+ flagword object_flags;
+
+ /* A mask of all the flags which a section may have set - from
+ the set <<SEC_NO_FLAGS>>, <<SEC_ALLOC>>, ...<<SET_NEVER_LOAD>>. */
flagword section_flags;
+
+ /* The character normally found at the front of a symbol.
+ (if any), perhaps `_'. */
char symbol_leading_char;
- char ar_pad_char;
+
+ /* The pad character for file names within an archive header. */
+ char ar_pad_char;
+
+ /* The maximum number of characters in an archive header. */
unsigned short ar_max_namelen;
- bfd_vma (*bfd_getx64) PARAMS ((const bfd_byte *));
+
+ /* Entries for byte swapping for data. These are different from the
+ other entry points, since they don't take a BFD asthe first argument.
+ Certain other handlers could do the same. */
+ bfd_vma (*bfd_getx64) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((const bfd_byte *));
- void (*bfd_putx64) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_getx32) PARAMS ((const bfd_byte *));
+ void (*bfd_putx64) PARAMS ((bfd_vma, bfd_byte *));
+ bfd_vma (*bfd_getx32) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_getx_signed_32) PARAMS ((const bfd_byte *));
- void (*bfd_putx32) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_getx16) PARAMS ((const bfd_byte *));
+ void (*bfd_putx32) PARAMS ((bfd_vma, bfd_byte *));
+ bfd_vma (*bfd_getx16) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_getx_signed_16) PARAMS ((const bfd_byte *));
- void (*bfd_putx16) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_h_getx64) PARAMS ((const bfd_byte *));
+ void (*bfd_putx16) PARAMS ((bfd_vma, bfd_byte *));
+
+ /* Byte swapping for the headers. */
+ bfd_vma (*bfd_h_getx64) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_h_getx_signed_64) PARAMS ((const bfd_byte *));
- void (*bfd_h_putx64) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_h_getx32) PARAMS ((const bfd_byte *));
+ void (*bfd_h_putx64) PARAMS ((bfd_vma, bfd_byte *));
+ bfd_vma (*bfd_h_getx32) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_h_getx_signed_32) PARAMS ((const bfd_byte *));
- void (*bfd_h_putx32) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_h_getx16) PARAMS ((const bfd_byte *));
+ void (*bfd_h_putx32) PARAMS ((bfd_vma, bfd_byte *));
+ bfd_vma (*bfd_h_getx16) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((const bfd_byte *));
- void (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *));
+ void (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *));
+
+ /* Format dependent routines: these are vectors of entry points
+ within the target vector structure, one for each format to check. */
+
+ /* Check the format of a file being read. Return a <<bfd_target *>> or zero. */
const struct bfd_target *(*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *));
- boolean (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *));
- boolean (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *));
+
+ /* Set the format of a file being written. */
+ boolean (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *));
+
+ /* Write cached information into a file being written, at <<bfd_close>>. */
+ boolean (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *));
+
/* Generic entry points. */
-#define BFD_JUMP_TABLE_GENERIC(NAME)\
-CAT(NAME,_close_and_cleanup),\
-CAT(NAME,_bfd_free_cached_info),\
-CAT(NAME,_new_section_hook),\
-CAT(NAME,_get_section_contents),\
-CAT(NAME,_get_section_contents_in_window)
+#define BFD_JUMP_TABLE_GENERIC(NAME) \
+CONCAT2 (NAME,_close_and_cleanup), \
+CONCAT2 (NAME,_bfd_free_cached_info), \
+CONCAT2 (NAME,_new_section_hook), \
+CONCAT2 (NAME,_get_section_contents), \
+CONCAT2 (NAME,_get_section_contents_in_window)
/* Called when the BFD is being closed to do any necessary cleanup. */
- boolean (*_close_and_cleanup) PARAMS ((bfd *));
+ boolean (*_close_and_cleanup) PARAMS ((bfd *));
/* Ask the BFD to free all cached information. */
- boolean (*_bfd_free_cached_info) PARAMS ((bfd *));
+ boolean (*_bfd_free_cached_info) PARAMS ((bfd *));
/* Called when a new section is created. */
- boolean (*_new_section_hook) PARAMS ((bfd *, sec_ptr));
+ boolean (*_new_section_hook) PARAMS ((bfd *, sec_ptr));
/* Read the contents of a section. */
- boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
- file_ptr, bfd_size_type));
- boolean (*_bfd_get_section_contents_in_window)
- PARAMS ((bfd *, sec_ptr, bfd_window *,
- file_ptr, bfd_size_type));
+ boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
+ file_ptr, bfd_size_type));
+ boolean (*_bfd_get_section_contents_in_window)
+ PARAMS ((bfd *, sec_ptr, bfd_window *, file_ptr, bfd_size_type));
/* Entry points to copy private data. */
-#define BFD_JUMP_TABLE_COPY(NAME)\
-CAT(NAME,_bfd_copy_private_bfd_data),\
-CAT(NAME,_bfd_merge_private_bfd_data),\
-CAT(NAME,_bfd_copy_private_section_data),\
-CAT(NAME,_bfd_copy_private_symbol_data),\
-CAT(NAME,_bfd_set_private_flags),\
-CAT(NAME,_bfd_print_private_bfd_data)\
+#define BFD_JUMP_TABLE_COPY(NAME) \
+CONCAT2 (NAME,_bfd_copy_private_bfd_data), \
+CONCAT2 (NAME,_bfd_merge_private_bfd_data), \
+CONCAT2 (NAME,_bfd_copy_private_section_data), \
+CONCAT2 (NAME,_bfd_copy_private_symbol_data), \
+CONCAT2 (NAME,_bfd_set_private_flags), \
+CONCAT2 (NAME,_bfd_print_private_bfd_data) \
/* Called to copy BFD general private data from one object file
to another. */
- boolean (*_bfd_copy_private_bfd_data) PARAMS ((bfd *, bfd *));
+ boolean (*_bfd_copy_private_bfd_data) PARAMS ((bfd *, bfd *));
/* Called to merge BFD general private data from one object file
to a common output file when linking. */
- boolean (*_bfd_merge_private_bfd_data) PARAMS ((bfd *, bfd *));
+ boolean (*_bfd_merge_private_bfd_data) PARAMS ((bfd *, bfd *));
/* Called to copy BFD private section data from one object file
to another. */
- boolean (*_bfd_copy_private_section_data) PARAMS ((bfd *, sec_ptr,
- bfd *, sec_ptr));
- /* Called to copy BFD private symbol data from one symbol
+ boolean (*_bfd_copy_private_section_data) PARAMS ((bfd *, sec_ptr,
+ bfd *, sec_ptr));
+ /* Called to copy BFD private symbol data from one symbol
to another. */
- boolean (*_bfd_copy_private_symbol_data) PARAMS ((bfd *, asymbol *,
- bfd *, asymbol *));
- /* Called to set private backend flags */
- boolean (*_bfd_set_private_flags) PARAMS ((bfd *, flagword));
+ boolean (*_bfd_copy_private_symbol_data) PARAMS ((bfd *, asymbol *,
+ bfd *, asymbol *));
+ /* Called to set private backend flags. */
+ boolean (*_bfd_set_private_flags) PARAMS ((bfd *, flagword));
- /* Called to print private BFD data */
- boolean (*_bfd_print_private_bfd_data) PARAMS ((bfd *, PTR));
+ /* Called to print private BFD data. */
+ boolean (*_bfd_print_private_bfd_data) PARAMS ((bfd *, PTR));
/* Core file entry points. */
-#define BFD_JUMP_TABLE_CORE(NAME)\
-CAT(NAME,_core_file_failing_command),\
-CAT(NAME,_core_file_failing_signal),\
-CAT(NAME,_core_file_matches_executable_p)
+#define BFD_JUMP_TABLE_CORE(NAME) \
+CONCAT2 (NAME,_core_file_failing_command), \
+CONCAT2 (NAME,_core_file_failing_signal), \
+CONCAT2 (NAME,_core_file_matches_executable_p)
char * (*_core_file_failing_command) PARAMS ((bfd *));
int (*_core_file_failing_signal) PARAMS ((bfd *));
boolean (*_core_file_matches_executable_p) PARAMS ((bfd *, bfd *));
/* Archive entry points. */
-#define BFD_JUMP_TABLE_ARCHIVE(NAME)\
-CAT(NAME,_slurp_armap),\
-CAT(NAME,_slurp_extended_name_table),\
-CAT(NAME,_construct_extended_name_table),\
-CAT(NAME,_truncate_arname),\
-CAT(NAME,_write_armap),\
-CAT(NAME,_read_ar_hdr),\
-CAT(NAME,_openr_next_archived_file),\
-CAT(NAME,_get_elt_at_index),\
-CAT(NAME,_generic_stat_arch_elt),\
-CAT(NAME,_update_armap_timestamp)
+#define BFD_JUMP_TABLE_ARCHIVE(NAME) \
+CONCAT2 (NAME,_slurp_armap), \
+CONCAT2 (NAME,_slurp_extended_name_table), \
+CONCAT2 (NAME,_construct_extended_name_table), \
+CONCAT2 (NAME,_truncate_arname), \
+CONCAT2 (NAME,_write_armap), \
+CONCAT2 (NAME,_read_ar_hdr), \
+CONCAT2 (NAME,_openr_next_archived_file), \
+CONCAT2 (NAME,_get_elt_at_index), \
+CONCAT2 (NAME,_generic_stat_arch_elt), \
+CONCAT2 (NAME,_update_armap_timestamp)
boolean (*_bfd_slurp_armap) PARAMS ((bfd *));
boolean (*_bfd_slurp_extended_name_table) PARAMS ((bfd *));
boolean (*_bfd_construct_extended_name_table)
- PARAMS ((bfd *, char **, bfd_size_type *, const char **));
- void (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *));
- boolean (*write_armap) PARAMS ((bfd *arch,
- unsigned int elength,
- struct orl *map,
- unsigned int orl_count,
- int stridx));
- PTR (*_bfd_read_ar_hdr_fn) PARAMS ((bfd *));
- bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
+ PARAMS ((bfd *, char **, bfd_size_type *, const char **));
+ void (*_bfd_truncate_arname) PARAMS ((bfd *, const char *, char *));
+ boolean (*write_armap)
+ PARAMS ((bfd *, unsigned int, struct orl *, unsigned int, int));
+ PTR (*_bfd_read_ar_hdr_fn) PARAMS ((bfd *));
+ bfd * (*openr_next_archived_file) PARAMS ((bfd *, bfd *));
#define bfd_get_elt_at_index(b,i) BFD_SEND(b, _bfd_get_elt_at_index, (b,i))
bfd * (*_bfd_get_elt_at_index) PARAMS ((bfd *, symindex));
int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
boolean (*_bfd_update_armap_timestamp) PARAMS ((bfd *));
/* Entry points used for symbols. */
-#define BFD_JUMP_TABLE_SYMBOLS(NAME)\
-CAT(NAME,_get_symtab_upper_bound),\
-CAT(NAME,_get_symtab),\
-CAT(NAME,_make_empty_symbol),\
-CAT(NAME,_print_symbol),\
-CAT(NAME,_get_symbol_info),\
-CAT(NAME,_bfd_is_local_label_name),\
-CAT(NAME,_get_lineno),\
-CAT(NAME,_find_nearest_line),\
-CAT(NAME,_bfd_make_debug_symbol),\
-CAT(NAME,_read_minisymbols),\
-CAT(NAME,_minisymbol_to_symbol)
- long (*_bfd_get_symtab_upper_bound) PARAMS ((bfd *));
- long (*_bfd_canonicalize_symtab) PARAMS ((bfd *,
- struct symbol_cache_entry **));
- struct symbol_cache_entry *
- (*_bfd_make_empty_symbol) PARAMS ((bfd *));
- void (*_bfd_print_symbol) PARAMS ((bfd *, PTR,
- struct symbol_cache_entry *,
- bfd_print_symbol_type));
+#define BFD_JUMP_TABLE_SYMBOLS(NAME) \
+CONCAT2 (NAME,_get_symtab_upper_bound), \
+CONCAT2 (NAME,_get_symtab), \
+CONCAT2 (NAME,_make_empty_symbol), \
+CONCAT2 (NAME,_print_symbol), \
+CONCAT2 (NAME,_get_symbol_info), \
+CONCAT2 (NAME,_bfd_is_local_label_name), \
+CONCAT2 (NAME,_get_lineno), \
+CONCAT2 (NAME,_find_nearest_line), \
+CONCAT2 (NAME,_bfd_make_debug_symbol), \
+CONCAT2 (NAME,_read_minisymbols), \
+CONCAT2 (NAME,_minisymbol_to_symbol)
+ long (*_bfd_get_symtab_upper_bound) PARAMS ((bfd *));
+ long (*_bfd_canonicalize_symtab) PARAMS ((bfd *,
+ struct symbol_cache_entry **));
+ struct symbol_cache_entry *
+ (*_bfd_make_empty_symbol) PARAMS ((bfd *));
+ void (*_bfd_print_symbol) PARAMS ((bfd *, PTR,
+ struct symbol_cache_entry *,
+ bfd_print_symbol_type));
#define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e))
- void (*_bfd_get_symbol_info) PARAMS ((bfd *,
- struct symbol_cache_entry *,
- symbol_info *));
+ void (*_bfd_get_symbol_info) PARAMS ((bfd *,
+ struct symbol_cache_entry *,
+ symbol_info *));
#define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e))
- boolean (*_bfd_is_local_label_name) PARAMS ((bfd *, const char *));
+ boolean (*_bfd_is_local_label_name) PARAMS ((bfd *, const char *));
- alent * (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *));
- boolean (*_bfd_find_nearest_line) PARAMS ((bfd *abfd,
- struct sec *section, struct symbol_cache_entry **symbols,
- bfd_vma offset, CONST char **file, CONST char **func,
- unsigned int *line));
+ alent * (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *));
+ boolean (*_bfd_find_nearest_line)
+ PARAMS ((bfd *, struct sec *, struct symbol_cache_entry **, bfd_vma,
+ const char **, const char **, unsigned int *));
/* Back-door to allow format-aware applications to create debug symbols
while using BFD for everything else. Currently used by the assembler
when creating COFF files. */
- asymbol * (*_bfd_make_debug_symbol) PARAMS ((
- bfd *abfd,
- void *ptr,
- unsigned long size));
+ asymbol *(*_bfd_make_debug_symbol) PARAMS ((bfd *, void *,
+ unsigned long size));
#define bfd_read_minisymbols(b, d, m, s) \
BFD_SEND (b, _read_minisymbols, (b, d, m, s))
- long (*_read_minisymbols) PARAMS ((bfd *, boolean, PTR *,
- unsigned int *));
+ long (*_read_minisymbols) PARAMS ((bfd *, boolean, PTR *,
+ unsigned int *));
#define bfd_minisymbol_to_symbol(b, d, m, f) \
BFD_SEND (b, _minisymbol_to_symbol, (b, d, m, f))
asymbol *(*_minisymbol_to_symbol) PARAMS ((bfd *, boolean, const PTR,
asymbol *));
/* Routines for relocs. */
-#define BFD_JUMP_TABLE_RELOCS(NAME)\
-CAT(NAME,_get_reloc_upper_bound),\
-CAT(NAME,_canonicalize_reloc),\
-CAT(NAME,_bfd_reloc_type_lookup)
- long (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr));
- long (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **,
- struct symbol_cache_entry **));
+#define BFD_JUMP_TABLE_RELOCS(NAME) \
+CONCAT2 (NAME,_get_reloc_upper_bound), \
+CONCAT2 (NAME,_canonicalize_reloc), \
+CONCAT2 (NAME,_bfd_reloc_type_lookup)
+ long (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr));
+ long (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **,
+ struct symbol_cache_entry **));
/* See documentation on reloc types. */
reloc_howto_type *
- (*reloc_type_lookup) PARAMS ((bfd *abfd,
- bfd_reloc_code_real_type code));
+ (*reloc_type_lookup) PARAMS ((bfd *, bfd_reloc_code_real_type));
/* Routines used when writing an object file. */
-#define BFD_JUMP_TABLE_WRITE(NAME)\
-CAT(NAME,_set_arch_mach),\
-CAT(NAME,_set_section_contents)
- boolean (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture,
- unsigned long));
- boolean (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
- file_ptr, bfd_size_type));
+#define BFD_JUMP_TABLE_WRITE(NAME) \
+CONCAT2 (NAME,_set_arch_mach), \
+CONCAT2 (NAME,_set_section_contents)
+ boolean (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture,
+ unsigned long));
+ boolean (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
+ file_ptr, bfd_size_type));
/* Routines used by the linker. */
-#define BFD_JUMP_TABLE_LINK(NAME)\
-CAT(NAME,_sizeof_headers),\
-CAT(NAME,_bfd_get_relocated_section_contents),\
-CAT(NAME,_bfd_relax_section),\
-CAT(NAME,_bfd_link_hash_table_create),\
-CAT(NAME,_bfd_link_add_symbols),\
-CAT(NAME,_bfd_final_link),\
-CAT(NAME,_bfd_link_split_section),\
-CAT(NAME,_bfd_gc_sections)
- int (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean));
- bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *,
- struct bfd_link_info *, struct bfd_link_order *,
- bfd_byte *data, boolean relocateable,
- struct symbol_cache_entry **));
-
- boolean (*_bfd_relax_section) PARAMS ((bfd *, struct sec *,
- struct bfd_link_info *, boolean *again));
+#define BFD_JUMP_TABLE_LINK(NAME) \
+CONCAT2 (NAME,_sizeof_headers), \
+CONCAT2 (NAME,_bfd_get_relocated_section_contents), \
+CONCAT2 (NAME,_bfd_relax_section), \
+CONCAT2 (NAME,_bfd_link_hash_table_create), \
+CONCAT2 (NAME,_bfd_link_hash_table_free), \
+CONCAT2 (NAME,_bfd_link_add_symbols), \
+CONCAT2 (NAME,_bfd_final_link), \
+CONCAT2 (NAME,_bfd_link_split_section), \
+CONCAT2 (NAME,_bfd_gc_sections), \
+CONCAT2 (NAME,_bfd_merge_sections)
+ int (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean));
+ bfd_byte *(*_bfd_get_relocated_section_contents)
+ PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_order *,
+ bfd_byte *, boolean, struct symbol_cache_entry **));
+
+ boolean (*_bfd_relax_section)
+ PARAMS ((bfd *, struct sec *, struct bfd_link_info *, boolean *));
/* Create a hash table for the linker. Different backends store
different information in this table. */
struct bfd_link_hash_table *(*_bfd_link_hash_table_create) PARAMS ((bfd *));
+ /* Release the memory associated with the linker hash table. */
+ void (*_bfd_link_hash_table_free) PARAMS ((struct bfd_link_hash_table *));
+
/* Add symbols from this object file into the hash table. */
- boolean (*_bfd_link_add_symbols) PARAMS ((bfd *, struct bfd_link_info *));
+ boolean (*_bfd_link_add_symbols) PARAMS ((bfd *, struct bfd_link_info *));
/* Do a link based on the link_order structures attached to each
section of the BFD. */
- boolean (*_bfd_final_link) PARAMS ((bfd *, struct bfd_link_info *));
+ boolean (*_bfd_final_link) PARAMS ((bfd *, struct bfd_link_info *));
/* Should this section be split up into smaller pieces during linking. */
- boolean (*_bfd_link_split_section) PARAMS ((bfd *, struct sec *));
+ boolean (*_bfd_link_split_section) PARAMS ((bfd *, struct sec *));
/* Remove sections that are not referenced from the output. */
- boolean (*_bfd_gc_sections) PARAMS ((bfd *, struct bfd_link_info *));
+ boolean (*_bfd_gc_sections) PARAMS ((bfd *, struct bfd_link_info *));
+
+ /* Attempt to merge SEC_MERGE sections. */
+ boolean (*_bfd_merge_sections) PARAMS ((bfd *, struct bfd_link_info *));
/* Routines to handle dynamic symbols and relocs. */
-#define BFD_JUMP_TABLE_DYNAMIC(NAME)\
-CAT(NAME,_get_dynamic_symtab_upper_bound),\
-CAT(NAME,_canonicalize_dynamic_symtab),\
-CAT(NAME,_get_dynamic_reloc_upper_bound),\
-CAT(NAME,_canonicalize_dynamic_reloc)
- /* Get the amount of memory required to hold the dynamic symbols. */
- long (*_bfd_get_dynamic_symtab_upper_bound) PARAMS ((bfd *));
+#define BFD_JUMP_TABLE_DYNAMIC(NAME) \
+CONCAT2 (NAME,_get_dynamic_symtab_upper_bound), \
+CONCAT2 (NAME,_canonicalize_dynamic_symtab), \
+CONCAT2 (NAME,_get_dynamic_reloc_upper_bound), \
+CONCAT2 (NAME,_canonicalize_dynamic_reloc)
+ /* Get the amount of memory required to hold the dynamic symbols. */
+ long (*_bfd_get_dynamic_symtab_upper_bound) PARAMS ((bfd *));
/* Read in the dynamic symbols. */
- long (*_bfd_canonicalize_dynamic_symtab)
+ long (*_bfd_canonicalize_dynamic_symtab)
PARAMS ((bfd *, struct symbol_cache_entry **));
/* Get the amount of memory required to hold the dynamic relocs. */
- long (*_bfd_get_dynamic_reloc_upper_bound) PARAMS ((bfd *));
+ long (*_bfd_get_dynamic_reloc_upper_bound) PARAMS ((bfd *));
/* Read in the dynamic relocs. */
- long (*_bfd_canonicalize_dynamic_reloc)
+ long (*_bfd_canonicalize_dynamic_reloc)
PARAMS ((bfd *, arelent **, struct symbol_cache_entry **));
- /* Opposite endian version of this target. */
- const struct bfd_target * alternative_target;
-
- PTR backend_data;
-
+ /* Opposite endian version of this target. */
+ const struct bfd_target * alternative_target;
+
+ /* Data for use by back-end routines, which isn't
+ generic enough to belong in this structure. */
+ PTR backend_data;
+
} bfd_target;
-boolean
-bfd_set_default_target PARAMS ((const char *name));
+
+boolean
+bfd_set_default_target PARAMS ((const char *name));
const bfd_target *
-bfd_find_target PARAMS ((CONST char *target_name, bfd *abfd));
+bfd_find_target PARAMS ((const char *target_name, bfd *abfd));
const char **
bfd_target_list PARAMS ((void));
-const bfd_target *
-bfd_search_for_target PARAMS ((int (* search_func)(const bfd_target *, void *), void *));
+const bfd_target *
+bfd_search_for_target PARAMS ((int (* search_func) (const bfd_target *, void *), void *));
-boolean
+boolean
bfd_check_format PARAMS ((bfd *abfd, bfd_format format));
-boolean
+boolean
bfd_check_format_matches PARAMS ((bfd *abfd, bfd_format format, char ***matching));
-boolean
+boolean
bfd_set_format PARAMS ((bfd *abfd, bfd_format format));
-CONST char *
+const char *
bfd_format_string PARAMS ((bfd_format format));
#ifdef __cplusplus