See the maintain.texi file for details on how to obtain these
permissions.
+Note - when performing a release it is helpful to edit this document
+as you go, updating the example commands so that they are ready for
+the release that follows.
+
-------------------------------------------------
How to perform a release.
-------------------------------------------------
- 1. Send an email out warning contributors about the forthcoming
- branch. Set a date for the branch (weekends are better because
- they are less busy).
+ 1. Choose dates for the branch and release. Weekends are better
+ because they are less busy. It is typical to leave two weeks
+ between creating the branch and creating the release.
+
+ Send an email out warning contributors about the forthcoming
+ branch and release.
2. When the branch date is near: Update the libiberty and config
directories and the top level Makefile and configure files. Also
consider updating the toplevel libtool files.
-
Approx time to complete from here: 2 hours ....
+ 2.5 If you have not built from the sources recently then now is the
+ time to check that they still work...
+
3. When branch day arrives add markers for the upcoming release to
the NEWS files in gas, ld, and binutils. No need to update NEWS
in the gold directory - it has its own release numbering.
Likewise for the ChangeLog files in: bfd, binutils, config, cpu,
- elfcpp, gas, gold, gprof, include, ld, libctf, libiberty, opcodes
- and toplevel.
+ elfcpp, gas, gold, gprof, include, ld, libctf, opcodes and toplevel.
Add a note of the name of the new branch to binutils/BRANCHES.
4. Create the release branch using:
- git branch binutils-2_38-branch
- git push origin binutils-2_38-branch
+ git branch binutils-2_41-branch
+ git push origin binutils-2_41-branch
If you get a message like:
5. Make sure that the branch is there. IE check out the branch sources:
- git clone ssh://sourceware.org/git/binutils-gdb.git -b binutils-2_38-branch 2.38
+ git clone ssh://sourceware.org/git/binutils-gdb.git -b binutils-2_41-branch 2.41
If you get a message about being in a "detached head" state, something
has gone wrong...
ask Joel Brobecker <brobecker AT adacore DOT com>.
7. Rename the current HEAD version entry in Bugzilla, and create a
- new one. E.g. rename "2.38 (HEAD)" to 2.38, and create
- "2.39 (HEAD)":
+ new one. E.g. rename "2.41 (HEAD)" to 2.41, and create
+ "2.42 (HEAD)":
https://sourceware.org/bugzilla/editversions.cgi?product=binutils
8. Update bfd/version.m4 on HEAD to indicate that is now a snapshot
- of the next release:
+ of the next release and the BRANCH to indicate that it is almost
+ ready for the release.
+
+ So if the release is going to be 2.41 then the version number on
+ the BRANCH should be set to 2.40.90 - ie almost, but not quite 2.41,
+ and the version number on the MAINLINE should be set to 2.41.50 -
+ ie half way to 2.42 release.
+
+ So the branch bfd/version.m4 has:
- m4_define([BFD_VERSION], [2.38.50])
+ m4_define([BFD_VERSION], [2.40.90])
- Update the release number in bfd/version.m4 for the BRANCH.
- The branch only needs the point value set to 90 as the release
- has not actually happened yet.
+ and the mainline has:
- m4_define([BFD_VERSION], [2.37.90])
+ m4_define([BFD_VERSION], [2.41.50])
Regenerate various files on both branch and HEAD by configuring
- with "--enable-maintainer-mode --enable-gold" and then building
- with "make all-binutils all-gas all-gold all-gprof all-ld"
+ with "--enable-maintainer-mode --enable-gold --enable-shared" and then building
+ with "make all-binutils all-gas all-gold all-gprof all-gprofng all-ld"
Add ChangeLog entries for the updated files. Commit the changes.
Make sure that this includes the .pot files as well as the
b. Create a source tarball of the BRANCH sources:
- ./src-release -x binutils
+ ./src-release.sh -x binutils
+
+ FIXME: Not sure if the following steps are needed...
+
+ Add a .dirstamp file to the gas/doc subdirectory:
+
+ touch -d <today's date> binutils-2.<release>/gas/doc/.dirstamp
+ tar rvf binutils-<release>.tar binutils-<release>/gas/doc/.ditstamp
+ rm binutils-<release>.tar.xz
+ xz -9 binutils-<release>.tar
+
+ eg:
+ touch -d 2023-06-01 binutils-2.40.90/gas/doc/.dirstamp
+ tar rvf binutils-2.40.90.tar binutils-2.40.90/gas/doc/.ditstamp
+ rm binutils-2.40.90.tar.xz
+ xz -9 binutils-2.40.90.tar
+
+ ...END OF FIXME
c. Build a test target using this tarball.
- cp binutils-2.37.90.tar.xz /dev/shm
+ cp binutils-2.40.90.tar.xz /dev/shm
pushd /dev/shm
- tar xvf binutils-2.36.90.tar.xz
+ tar xvf binutils-2.40.90.tar.xz
mkdir build
cd build
- ../binutils-2.37.90/configure --quiet --enable-gold
+ ../binutils-2.40.90/configure --quiet --enable-gold
make
popd
d. Upload the pre-release snapshot to the sourceware FTP site:
- scp binutils-2.37.90.tar.xz sourceware.org:~ftp/pub/binutils/snapshots
- ssh sourceware.org sha256sum ~ftp/pub/binutils/snapshots/binutils-2.37.90.tar.xz
+ scp binutils-2.40.90.tar.xz sourceware.org:/var/ftp/pub/binutils/snapshots
+ ssh sourceware.org sha256sum ~ftp/pub/binutils/snapshots/binutils-2.40.90.tar.xz
e. Clean up the source directory again.
------------------------------------------------------------------------
Dear Translation Project
- The 2.38 release branch has been created for the GNU Binutils project.
+ The 2.40 release branch has been created for the GNU Binutils project.
A snapshot of the branch sources can be found here:
- https://sourceware.org/pub/binutils/snapshots/binutils-2.37.90.tar.xz
+ https://sourceware.org/pub/binutils/snapshots/binutils-2.39.90.tar.xz
We hope to make the official release of the sources on the <DATE>
although that could change if there are important bugs that need to
cd <branch>
git clean -fdx
- 21. Update the release number in bfd/version.m4 on the release
- branch to a whole new minor version number, without a point
- value. Eg "2.36.90" becomes "2.37". Change bfd/development.sh
- to set all values to "false". Regenerate the configure and
- makefiles. And *info* files. Add ChangeLog entries for the
- updates and add a "this-is-the-2.3x-release" comment and
- commit.
+ 21. a. Update the release number in bfd/version.m4 on the release
+ branch to a whole new minor version number, without a point
+ value. Eg "2.40.90" becomes "2.41". NB/ Not: "2.41.00"
+ b. Change bfd/development.sh to set all values to "false".
+
+ c. Regenerate the configure and makefiles. And *info* files.
+
+ make all-gas all-ld all-binutils all-gprof all-gold all-gprofng all-libctf
+ make info
+
+ d. Create a ChangeLog from the git refs for all of the commits
+ from when changelog entries were no longer required:
+
+ gitlog-to-changelog --since=2021-07-03 > ChangeLog.git
+ git add ChangeLog.git
+
+ The gitlog-to-changelog script is part of the sources
+ of the "config" project.
+
+ e. Add ChangeLog entries for all of the updates and add a
+ "this-is-the-2.41-release" comment and commit.
+
+ git add .
+ git commit
+ git push
+
22. Check that your file creation mask will create the
correct file permissions. Eg:
DEVO_SUPPORT variable in the src-release.sh script. If they are
needed then add them.
- Create the release tarballs:
+ Create the release tarballs:
./src-release.sh -b -g -l -x binutils
+ OR ... for a more reproducible tarball:
+
+ ./src-release.sh -b -g -l -x -r `git log -1 --format=%cd --date=format:%F bfd/version.m4` binutils
+
24. Check that the files in the tarballs have the correct
- permissions. (FIXME: How to do this ?)
+ permissions.
+
+ tar tvf binutils-*.tar.xz | grep -e "---"
+
+ Also check that the man files are not empty. (cf PR 28144).
+
+ tar tvf binutils-*.tar.xz | grep -e "\.1"
25. Sanity check the release on x86_64-pc-linux-gnu by building and
- running the testsuites (gas, gold, binutils and ld). Make the
- source directory read-only before building. Also test
- "make install". If necessary fix any problems.
+ running the testsuites (gas, gold, binutils and ld).
+ Make the source directory read-only before building.
+ Also test 'make install'.
+ Also build the html and pdf documentation files.
+ If necessary fix any problems.
- cd /dev/shm
+ pushd /dev/shm
mkdir delme
cd delme
- tar xvf <path-to-sources>/binutils-2.*.tar.xz
+ tar xvf <path-to-sources>/binutils-2.*.tar.lz
chmod -R -w binutils-2.*
mkdir build
cd build
- ../binutils-2.X/configure --enable-gold --prefix=`pwd`/install --enable-plugins
- make all-gas all-gold all-ld all-binutils all-gprof
+ ../binutils-2.*/configure --quiet --enable-gold --prefix=`pwd`/install --enable-plugins --enable-shared
+ make all-gas all-gold all-ld all-binutils all-gprof all-gprofng
make check-gas check-binutils check-ld check-gold
- make install-gas install-gold install-ld install-binutils
+ make install-gas install-gold install-ld install-binutils install-gprofng
# Needed for step 29...
- make html pdf
+ make html pdf html-libctf pdf-libctf html-libsframe pdf-libsframe
+
+ popd
26. Tag the branch with the new release number:
+ [optional: add "-u XXXXX" to sign with a gpg key]
+ enter a tag message such as: "Official GNU Binutils 2.4x release"
+
+ git tag -a binutils-2_41 -u DD9E3C4F <=== Be careful to get the tag right
- git tag -a binutils-2_3x <=== Be careful to get the tag right
- [optional: add "-u XXXXX" to sign with a gpg key]
- enter a tag message such as: "Official Binutils 2.3x release"
-
NB/ If you do sign the binaries make sure to use a key
that has been published with the FSF.
Then push the release:
- git push origin binutils-2_3x
+ git push origin binutils-2_41
- If you get an error message along the lines of "Invalid revision range ..." you can ignore it.
+ If you get an error message along the lines of:
+ "Invalid revision range ..."
+ you can ignore it.
- 27. Upload the tarballs to ftp.gnu.org.
+ 27. Upload the tarballs to ftp.gnu.org.
- gnupload --to ftp.gnu.org:binutils binutils-2.3*.tar.*
+ for A in bz2 gz lz xz ; do gnupload --to ftp.gnu.org:binutils binutils-2.41.tar.$A ; done
- Be prepared to provide the password for the key, if you signed the binaries.
+ Be prepared to provide the password for the key, if you
+ signed the binaries.
- The gnupload script is in the gnulib/build-aux directory.
+ The gnupload script is in the gnulib/build-aux directory.
+ It uses the ncftp package for transmitting the files.
- Check for an email response from the upload. If necessary
- fix any problems.
+ Check for an email response from the upload. If necessary
+ fix any problems. (The response might take a while, so
+ proceed with the next steps if you are confident that
+ everything is OK).
28. Upload the tarballs (and signatures) to sourceware.org:
sftp sourceware.org
cd /sourceware/ftp/pub/binutils/releases
- put binutils-2.3*.tar.*
- chmod 644 binutils-2.3x.tar.*
+ put binutils-2.4*.tar.*
+ chmod 644 binutils-2.4*.tar.*
quit
- FIXME: Are the signatures (created by the gnupload script in step 27) needed ?
- [The above commands upload them and nobody has complained, so suggest that they
- are retained].
+ FIXME: Are the signatures (created by the gnupload script in step 27)
+ needed ? [The above commands upload them and nobody has complained,
+ so suggest that they are retained].
29. Update web pages. For sourceware.org:
sftp sourceware.org
cd /sourceware/www/sourceware/htdocs/binutils
- mkdir docs-2.3x
- cd docs-2.3x
- mkdir as bfd binutils gprof ld
+ mkdir docs-2.4x
+ cd docs-2.4x
+ mkdir as
+ mkdir bfd
+ mkdir binutils
+ mkdir gprof
+ mkdir ld
cd ../docs-2.3(x-1)
get index.html
Update the (local copy of the) index.html file to point to the
new documentation and mention the new version and then upload it.
- cd ../docs-2.3x
+ cd ../docs-2.4x
put index.html
- Make the html documentation locally with the "make html" command
- (see step 25 above). Then upload and rename the directories as
- needed. (sftp does not appear to support recursive uploads
- however, so the directories had to be made by hand, as shown above).
+ Make the html documentation locally with the "make html" command.
+ (This should have been done by step 25 above).
+ Then upload and rename the directories as needed.
+ (Sftp does not support recursive uploads however, so the directories
+ have to be made and populated by hand).
cd as
- lcd <build-dir>/gas/doc/
- put -R as {be patient - this takes a long time...}
+ lcd <build-dir>/gas/doc/as
+ put * {be patient - this takes a long time...}
+ lcd ..
+ cd ..
put as.html
put as.pdf
- cd ../bfd
- lcd ../../../bfd/doc/
- put -R bfd
+
+ cd bfd
+ lcd ../../bfd/doc/bfd
+ put *
+ cd ..
+ lcd ..
put bfd.html
put bfd.pdf
- cd ../binutils
- lcd ../../../binutils/doc/
- put -R binutils
+
+ cd binutils
+ lcd ../../binutils/binutils <=== NB/ Path not like others
+ put *
+ cd ..
+ lcd ../doc <=== Also not like the others
put binutils.html
put binutils.pdf
- cd ../gprof
- lcd ../../../gprof/
- put -R doc/gprof
+
+ cd gprof
+ lcd ../../gprof/doc/gprof
+ put *
+ cd ..
+ lcd ../.. <==== Different again
put gprof.html
put gprof.pdf
- cd ../ld
- lcd ../../ld/
- put -R doc/ld
+
+ cd ld
+ lcd ../ld/doc/ld
+ put *
+ cd ..
+ lcd ../..
put ld.html
put ld.pdf
+ lcd ../gprofng/doc
+ put gprofng.html
+ put gprofng.pdf
+
+ lcd ../../libctf/doc
+ put ctf-spec.html
+ put ctf-spec.pdf
+
+ lcd ../../libsframe/doc
+ put sframe-spec.html
+ put sframe-spec.pdf
+
Edit the top level binutils index.html file to change the links
to point to the new documentation.
cd ../..
get index.html
[edit]
+ [check that it works]
put index.html
rm docs
- ln -s docs-2.3x docs
+ ln -s docs-2.4x docs
quit
Check that the new web page is correct:
https://sourceware.org/binutils/
For the www.gnu.org site you have to email webmasters@gnu.org
- and ask them to make the change(s):
+ and ask them to copy the change(s):
---------------------------------------
Hi FSF Webmasters,
David Edelsohn <dje.gcc@gmail.com> announcing the new release.
Sign the email and include the checksum:
- sha256sum binutils-2.3*.tar.*
+ sha256sum binutils-2.4*.tar.*
(The email to Davis is so that he can update the GNU Toolchain
social media). Something like this:
-----------------------------------------------------------------------
Hi Everyone,
- We are pleased to announce that version 2.3x of the GNU Binutils project
+ We are pleased to announce that version 2.4x of the GNU Binutils project
sources have been released and are now available for download at:
https://ftp.gnu.org/gnu/binutils
checksums: xxxx
+ As an experiment these tarballs were made with the new "-r <date>"
+ option supported by the src-release.sh script. This attempts to make
+ reproducible tarballs by sorting the files and passing the
+ "--mtime=<date>" option to tar. The date used for these tarballs was
+ obtained by running:
+
+ git log -1 --format=%cd --date=format:%F bfd/version.m4
+
This release contains numerous bug fixes, and also the
following new features:
<extract info from the NEWS files>
+ For more information see:
+
+ https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=gas/NEWS;;hb=refs/tags/binutils-2_4x
+ https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=ld/NEWS;hb=refs/tags/binutils-2_4x
+ https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=binutils/NEWS;hb=refs/tags/binutils-2_4x
+
Our thanks go out to all of the binutils contributors, past and
present, for helping to make this release possible.
date suffix keeps the version lower than the trunk version.
Regenerate files. Commit these changes.
- 33. Email the binutils list telling everyone that the 2.3x branch
+ 33. Email the binutils list telling everyone that the 2.34 branch
is now open for business as usual and that patches no longer
need special approval.
section. Create a changelog entry and commit.
-
-
--------------------------------------------------------------------------
How to perform a POINT release.
--------------------------------------------------------------------------
https://sourceware.org/bugzilla/editmilestones.cgi?product=binutils
\f
-Copyright (C) 2017-2021 Free Software Foundation, Inc.
+Copyright (C) 2017-2023 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
projects / binutils-gdb.git / blobdiff