# endif
# endif
+#if defined(RS6000) || defined(POWERPC)
+# include <ucontext.h>
+#endif
+
#if defined(__MWERKS__) && !defined(POWERPC)
asm static void PushMacRegisters()
/* on your architecture. Run the test_setjmp program to see whether */
/* there is any chance it will work. */
-#ifndef USE_GENERIC_PUSH_REGS
+#if !defined(USE_GENERIC_PUSH_REGS) && !defined(USE_ASM_PUSH_REGS)
+#undef HAVE_PUSH_REGS
void GC_push_regs()
{
# ifdef RT
register long TMP_SP; /* must be bound to r11 */
# endif
-# if defined(MIPS) && defined(LINUX)
- /* I'm not sure whether this has actually been tested. */
-# define call_push(x) asm("move $4," x ";"); asm("jal GC_push_one")
- call_push("$2");
- call_push("$3");
- call_push("$16");
- call_push("$17");
- call_push("$18");
- call_push("$19");
- call_push("$20");
- call_push("$21");
- call_push("$22");
- call_push("$23");
- call_push("$30");
-# undef call_push
-# endif /* MIPS && LINUX */
-
# ifdef VAX
/* VAX - generic code below does not work under 4.2 */
/* r1 through r5 are caller save, and therefore */
asm("pushl r8"); asm("calls $1,_GC_push_one");
asm("pushl r7"); asm("calls $1,_GC_push_one");
asm("pushl r6"); asm("calls $1,_GC_push_one");
+# define HAVE_PUSH_REGS
# endif
# if defined(M68K) && (defined(SUNOS4) || defined(NEXT))
/* M68K SUNOS - could be replaced by generic code */
asm("movl d7,sp@"); asm("jbsr _GC_push_one");
asm("addqw #0x4,sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# endif
# if defined(M68K) && defined(HP)
asm("mov.l %d7,(%sp)"); asm("jsr _GC_push_one");
asm("addq.w &0x4,%sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# endif /* M68K HP */
# if defined(M68K) && defined(AMIGA)
asm("mov.l %d7,(%sp)"); asm("jsr _GC_push_one");
asm("addq.w &0x4,%sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# else /* !__GNUC__ */
GC_push_one(getreg(REG_A2));
GC_push_one(getreg(REG_A3));
GC_push_one(getreg(REG_D5));
GC_push_one(getreg(REG_D6));
GC_push_one(getreg(REG_D7));
+# define HAVE_PUSH_REGS
# endif /* !__GNUC__ */
# endif /* AMIGA */
PushMacReg(d7);
add.w #4,sp ; fix stack.
}
+# define HAVE_PUSH_REGS
# undef PushMacReg
# endif /* THINK_C */
# if defined(__MWERKS__)
PushMacRegisters();
+# define HAVE_PUSH_REGS
# endif /* __MWERKS__ */
# endif /* MACOS */
asm("pushl %esi"); asm("call _GC_push_one"); asm("addl $4,%esp");
asm("pushl %edi"); asm("call _GC_push_one"); asm("addl $4,%esp");
asm("pushl %ebx"); asm("call _GC_push_one"); asm("addl $4,%esp");
+# define HAVE_PUSH_REGS
# endif
# if ( defined(I386) && defined(LINUX) && defined(__ELF__) ) \
|| ( defined(I386) && defined(FREEBSD) && defined(__ELF__) ) \
|| ( defined(I386) && defined(NETBSD) && defined(__ELF__) ) \
|| ( defined(I386) && defined(OPENBSD) && defined(__ELF__) ) \
- || ( defined(I386) && defined(HURD) && defined(__ELF__) )
+ || ( defined(I386) && defined(HURD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(DGUX) )
/* This is modified for Linux with ELF (Note: _ELF_ only) */
/* This section handles FreeBSD with ELF. */
asm("pushl %esi; call GC_push_one; addl $4,%esp");
asm("pushl %edi; call GC_push_one; addl $4,%esp");
asm("pushl %ebx; call GC_push_one; addl $4,%esp");
+# define HAVE_PUSH_REGS
# endif
# if ( defined(I386) && defined(BEOS) && defined(__ELF__) )
asm("pushl %esi; call GC_push_one; addl $4,%esp");
asm("pushl %edi; call GC_push_one; addl $4,%esp");
asm("pushl %ebx; call GC_push_one; addl $4,%esp");
+# define HAVE_PUSH_REGS
# endif
# if defined(I386) && defined(MSWIN32) && !defined(__MINGW32__) \
__asm push edi
__asm call GC_push_one
__asm add esp,4
+# define HAVE_PUSH_REGS
# endif
# if defined(I386) && (defined(SVR4) || defined(SCO) || defined(SCO_ELF))
asm("pushl %ebp"); asm("call GC_push_one"); asm("addl $4,%esp");
asm("pushl %esi"); asm("call GC_push_one"); asm("addl $4,%esp");
asm("pushl %edi"); asm("call GC_push_one"); asm("addl $4,%esp");
+# define HAVE_PUSH_REGS
# endif
# ifdef NS32K
asm ("movd r5, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
asm ("movd r6, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
asm ("movd r7, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
+# define HAVE_PUSH_REGS
# endif
# if defined(SPARC)
- {
- word GC_save_regs_in_stack();
-
- GC_save_regs_ret_val = GC_save_regs_in_stack();
- }
+ GC_save_regs_ret_val = GC_save_regs_in_stack();
+# define HAVE_PUSH_REGS
# endif
# ifdef RT
asm("cas r11, r13, r0"); GC_push_one(TMP_SP); /* through */
asm("cas r11, r14, r0"); GC_push_one(TMP_SP); /* r15 */
asm("cas r11, r15, r0"); GC_push_one(TMP_SP);
+# define HAVE_PUSH_REGS
# endif
# if defined(M68K) && defined(SYSV)
asm("movl %d7,%sp@"); asm("jbsr GC_push_one");
asm("addqw #0x4,%sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# else /* !__GNUC__*/
asm("subq.w &0x4,%sp"); /* allocate word on top of stack */
asm("mov.l %d7,(%sp)"); asm("jsr GC_push_one");
asm("addq.w &0x4,%sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# endif /* !__GNUC__ */
# endif /* M68K/SYSV */
extern int *__libc_stack_end;
GC_push_all_stack (sp, __libc_stack_end);
+# define HAVE_PUSH_REGS
+ /* Isn't this redundant with the code to push the stack? */
}
# endif
/* other machines... */
-# if !defined(M68K) && !defined(VAX) && !defined(RT)
-# if !defined(SPARC) && !defined(I386) && !defined(NS32K)
-# if !defined(POWERPC) && !defined(UTS4)
-# if !defined(PJ) && !(defined(MIPS) && defined(LINUX))
- --> bad news <--
-# endif
-# endif
+# if !defined(HAVE_PUSH_REGS)
+ --> We just generated an empty GC_push_regs, which
+ --> is almost certainly broken. Try defining
+ --> USE_GENERIC_PUSH_REGS instead.
# endif
+}
+#endif /* !USE_GENERIC_PUSH_REGS && !USE_ASM_PUSH_REGS */
+
+void GC_with_callee_saves_pushed(fn, arg)
+void (*fn)();
+ptr_t arg;
+{
+ word dummy;
+
+# if defined(USE_GENERIC_PUSH_REGS)
+# ifdef HAVE_BUILTIN_UNWIND_INIT
+ /* This was suggested by Richard Henderson as the way to */
+ /* force callee-save registers and register windows onto */
+ /* the stack. */
+ __builtin_unwind_init();
+# else /* !HAVE_BUILTIN_UNWIND_INIT */
+# if defined(RS6000) || defined(POWERPC)
+ /* FIXME: RS6000 means AIX. */
+ /* This should probably be used in all Posix/non-gcc */
+ /* settings. We defer that change to minimize risk. */
+ ucontext_t ctxt;
+ getcontext(&ctxt);
+# else
+ /* Generic code */
+ /* The idea is due to Parag Patel at HP. */
+ /* We're not sure whether he would like */
+ /* to be he acknowledged for it or not. */
+ jmp_buf regs;
+ register word * i = (word *) regs;
+ register ptr_t lim = (ptr_t)(regs) + (sizeof regs);
+
+ /* Setjmp doesn't always clear all of the buffer. */
+ /* That tends to preserve garbage. Clear it. */
+ for (; (char *)i < lim; i++) {
+ *i = 0;
+ }
+# if defined(MSWIN32) || defined(MSWINCE) \
+ || defined(UTS4) || defined(LINUX) || defined(EWS4800)
+ (void) setjmp(regs);
+# else
+ (void) _setjmp(regs);
+ /* We don't want to mess with signals. According to */
+ /* SUSV3, setjmp() may or may not save signal mask. */
+ /* _setjmp won't, but is less portable. */
# endif
+# endif /* !AIX ... */
+# endif /* !HAVE_BUILTIN_UNWIND_INIT */
+# else
+# if defined(PTHREADS) && !defined(MSWIN32) /* !USE_GENERIC_PUSH_REGS */
+ /* We may still need this to save thread contexts. */
+ ucontext_t ctxt;
+ getcontext(&ctxt);
+# else /* Shouldn't be needed */
+ ABORT("Unexpected call to GC_with_callee_saves_pushed");
+# endif
+# endif
+# if (defined(SPARC) && !defined(HAVE_BUILTIN_UNWIND_INIT)) \
+ || defined(IA64)
+ /* On a register window machine, we need to save register */
+ /* contents on the stack for this to work. The setjmp */
+ /* is probably not needed on SPARC, since pointers are */
+ /* only stored in windowed or scratch registers. It is */
+ /* needed on IA64, since some non-windowed registers are */
+ /* preserved. */
+ {
+ GC_save_regs_ret_val = GC_save_regs_in_stack();
+ /* On IA64 gcc, could use __builtin_ia64_flushrs() and */
+ /* __builtin_ia64_flushrs(). The latter will be done */
+ /* implicitly by __builtin_unwind_init() for gcc3.0.1 */
+ /* and later. */
+ }
+# endif
+ fn(arg);
+ /* Strongly discourage the compiler from treating the above */
+ /* as a tail-call, since that would pop the register */
+ /* contents before we get a chance to look at them. */
+ GC_noop1((word)(&dummy));
}
-#endif /* !USE_GENERIC_PUSH_REGS */
#if defined(USE_GENERIC_PUSH_REGS)
void GC_generic_push_regs(cold_gc_frame)
ptr_t cold_gc_frame;
{
- {
-# ifdef HAVE_BUILTIN_UNWIND_INIT
- /* This was suggested by Richard Henderson as the way to */
- /* force callee-save registers and register windows onto */
- /* the stack. */
- __builtin_unwind_init();
-# else /* !HAVE_BUILTIN_UNWIND_INIT */
- /* Generic code */
- /* The idea is due to Parag Patel at HP. */
- /* We're not sure whether he would like */
- /* to be he acknowledged for it or not. */
- jmp_buf regs;
- register word * i = (word *) regs;
- register ptr_t lim = (ptr_t)(regs) + (sizeof regs);
-
- /* Setjmp doesn't always clear all of the buffer. */
- /* That tends to preserve garbage. Clear it. */
- for (; (char *)i < lim; i++) {
- *i = 0;
- }
-# if defined(POWERPC) || defined(MSWIN32) || defined(MSWINCE) \
- || defined(UTS4) || defined(LINUX)
- (void) setjmp(regs);
-# else
- (void) _setjmp(regs);
-# endif
-# endif /* !HAVE_BUILTIN_UNWIND_INIT */
-# if (defined(SPARC) && !defined(HAVE_BUILTIN_UNWIND_INIT)) \
- || defined(IA64)
- /* On a register window machine, we need to save register */
- /* contents on the stack for this to work. The setjmp */
- /* is probably not needed on SPARC, since pointers are */
- /* only stored in windowed or scratch registers. It is */
- /* needed on IA64, since some non-windowed registers are */
- /* preserved. */
- {
- word GC_save_regs_in_stack();
-
- GC_save_regs_ret_val = GC_save_regs_in_stack();
- /* On IA64 gcc, could use __builtin_ia64_flushrs() and */
- /* __builtin_ia64_flushrs(). The latter will be done */
- /* implicitly by __builtin_unwind_init() for gcc3.0.1 */
- /* and later. */
- }
-# endif
- GC_push_current_stack(cold_gc_frame);
- }
+ GC_with_callee_saves_pushed(GC_push_current_stack, cold_gc_frame);
}
#endif /* USE_GENERIC_PUSH_REGS */
/* the stack. Return sp. */
# ifdef SPARC
asm(" .seg \"text\"");
-# ifdef SVR4
+# if defined(SVR4) || defined(NETBSD) || defined(FREEBSD)
asm(" .globl GC_save_regs_in_stack");
asm("GC_save_regs_in_stack:");
asm(" .type GC_save_regs_in_stack,#function");
/* On IA64, we also need to flush register windows. But they end */
/* up on the other side of the stack segment. */
/* Returns the backing store pointer for the register stack. */
-/* We implement this as a separate file in HP/UX. */
-# ifdef IA64
+/* We now implement this as a separate assembly file, since inline */
+/* assembly code here doesn't work with either the Intel or HP */
+/* compilers. */
+# if 0
# ifdef LINUX
asm(" .text");
asm(" .psr abi64");