# Configure fragment invoked in the post-target section for subdirs
# wanting multilib support.
#
+# Copyright (C) 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2010, 2011, 2014 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+#
+# Please report bugs to <gcc-bugs@gnu.org>
+# and send patches to <gcc-patches@gnu.org>.
+
# It is advisable to support a few --enable/--disable options to let the
# user select which libraries s/he really wants.
#
# Subdirectories wishing to use multilib should put the following lines
-# in the "post-target" section of configure.in.
+# in the "post-target" section of configure.ac.
#
# if [ "${srcdir}" = "." ] ; then
# if [ "${with_target_subdir}" != "." ] ; then
-# . ${srcdir}/${with_multisrctop}../../config-ml.in
+# . ${with_multisrctop}../../config-ml.in
# else
-# . ${srcdir}/${with_multisrctop}../config-ml.in
+# . ${with_multisrctop}../config-ml.in
# fi
# else
# . ${srcdir}/../config-ml.in
# fi
#
-# See librx/configure.in in the libg++ distribution for an example of how
-# to handle autoconf'd libraries.
#
# Things are complicated because 6 separate cases must be handled:
# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
# The build tree is layed out as
#
# ./
-# libg++
# newlib
# m68020/
-# libg++
# newlib
# m68881/
-# libg++
# newlib
#
# The nice feature about this arrangement is that inter-library references
# inter-library references also work in the source tree because symlink trees
# are built when srcdir=.
#
+# Unfortunately, trying to access the libraries in the build tree requires
+# the user to manually choose which library to use as GCC won't be able to
+# find the right one. This is viewed as the lesser of two evils.
+#
# Configure variables:
# ${with_target_subdir} = "." for native, or ${target_alias} for cross.
# Set by top level Makefile.
#
# Makefile variables:
# MULTISRCTOP = number of multilib levels in source tree (+1 if cross)
-# MULITBUILDTOP = number of multilib levels in build tree
+# (FIXME: note that this is different than ${with_multisrctop}. Check out.).
+# MULTIBUILDTOP = number of multilib levels in build tree
# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...)
# (only defined in each library's main Makefile).
# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000)
# newlib. It is up to each target to turn on multilib support for the other
# libraries as desired.
-# We have to handle being invoked by both Cygnus configure and Autoconf.
-# We except both to define `srcdir' and `target' (we *could* figure them
-# out, but we'd have to do work that they're already done to figure them out).
-# We expect Cygnus configure to define `arguments' and Autoconf to define
-# `ac_configure_args'.
+# Autoconf incoming variables:
+# srcdir, host, ac_configure_args
+#
+# We *could* figure srcdir and host out, but we'd have to do work that
+# our caller has already done to figure them out and requiring these two
+# seems reasonable.
+# Note that `host' in this case is GCC's `target'. Target libraries are
+# configured for a particular host.
-if [ -n "${ac_configure_args}" ]; then
- Makefile=${ac_file-Makefile}
- ml_config_shell=${CONFIG_SHELL-/bin/sh}
- ml_arguments="${ac_configure_args}"
-else
- Makefile=${Makefile-Makefile}
- ml_config_shell=${config_shell-/bin/sh}
- ml_arguments="${arguments}"
-fi
+Makefile=${ac_file-Makefile}
+ml_config_shell=${CONFIG_SHELL-/bin/sh}
+ml_realsrcdir=${srcdir}
# Scan all the arguments and set all the ones we need.
-for option in ${ml_arguments}
-do
- case $option in
- --*) ;;
- -*) option=-$option ;;
- esac
+scan_arguments ()
+{
+ ml_verbose=--verbose
+ for option
+ do
+ # Strip single quotes surrounding individual options, that is, remove one
+ # level of shell quoting for these.
+ case $option in
+ \'*\') eval option=$option ;;
+ esac
- case $option in
- --*=*)
+ case $option in
+ --*) ;;
+ -*) option=-$option ;;
+ esac
+
+ case $option in
+ --*=*)
optarg=`echo $option | sed -e 's/^[^=]*=//'`
;;
- esac
+ esac
- case $option in
- --disable-*)
+ case $option in
+ --disable-*)
enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
eval $enableopt=no
;;
- --enable-*)
+ --enable-*)
case "$option" in
*=*) ;;
*) optarg=yes ;;
esac
enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval $enableopt="$optarg"
+ # enable_shared and enable_static are handled by configure.
+ # Don't undo its work.
+ case $enableopt in
+ enable_shared | enable_static) ;;
+ *) eval $enableopt='$optarg' ;;
+ esac
;;
- --norecursion | --no*)
+ --norecursion | --no-recursion)
ml_norecursion=yes
;;
- --verbose | --v | --verb*)
+ --silent | --sil* | --quiet | --q*)
+ ml_verbose=--silent
+ ;;
+ --verbose | --v | --verb*)
ml_verbose=--verbose
;;
- --with-*)
+ --with-*)
case "$option" in
*=*) ;;
*) optarg=yes ;;
esac
withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval $withopt="$optarg"
+ eval $withopt='$optarg'
;;
- --without-*)
+ --without-*)
withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
eval $withopt=no
;;
- esac
-done
+ esac
+ done
+}
+# Use eval to properly handle configure arguments such as
+# --enable-foo='--enable-a=1 --enable-b=2 --enable-c=3'.
+eval scan_arguments "${ac_configure_args}"
+unset scan_arguments
# Only do this if --enable-multilib.
if [ "${enable_multilib}" = yes ]; then
# Compute whether this is the library's top level directory
-# (ie: not a multilib subdirectory, and not a subdirectory like libg++/src).
+# (ie: not a multilib subdirectory, and not a subdirectory like newlib/src).
# ${with_multisubdir} tells us we're in the right branch, but we could be
# in a subdir of that.
# ??? The previous version could void this test by separating the process into
-# two files: one that only the library's toplevel configure.in ran (to
-# configure the multilib subdirs), and another that all configure.in's ran to
+# two files: one that only the library's toplevel configure.ac ran (to
+# configure the multilib subdirs), and another that all configure.ac's ran to
# update the Makefile. It seemed reasonable to collapse all multilib support
# into one file, but it does leave us with having to perform this test.
ml_toplevel_p=no
if [ -z "${with_multisubdir}" ]; then
if [ "${srcdir}" = "." ]; then
+ # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
# ${with_target_subdir} = "." for native, otherwise target alias.
if [ "${with_target_subdir}" = "." ]; then
- if [ -f ../config-ml.in ]; then
+ if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
ml_toplevel_p=yes
fi
else
- if [ -f ../../config-ml.in ]; then
+ if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then
ml_toplevel_p=yes
fi
fi
else
- if [ -f ${srcdir}/../config-ml.in ]; then
+ # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
+ if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
ml_toplevel_p=yes
fi
fi
# If this is the library's top level directory, set multidirs to the
# multilib subdirs to support. This lives at the top because we need
-# `multidirs' set right away, and this section is subject to frequent
-# editing (addition of new targets, etc.).
+# `multidirs' set right away.
if [ "${ml_toplevel_p}" = yes ]; then
-case "${target}" in
-# start-sanitize-arc
-arc-sbp-elf*)
- if [ x$enable_biendian = xyes ]
+multidirs=
+for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
+ dir=`echo $i | sed -e 's/;.*$//'`
+ if [ "${dir}" = "." ]; then
+ true
+ else
+ if [ -z "${multidirs}" ]; then
+ multidirs="${dir}"
+ else
+ multidirs="${multidirs} ${dir}"
+ fi
+ fi
+done
+
+# Target libraries are configured for the host they run on, so we check
+# $host here, not $target.
+
+case "${host}" in
+arm-*-*)
+ if [ x"$enable_fpu" = xno ]
then
- multidirs="be host graphics audio be/host be/graphics be/audio"
- else
- multidirs="host graphics audio"
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *fpu*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
fi
- ;;
-arc-*-*)
- multidirs="be"
- ;;
-# end-sanitize-arc
-hppa*-*-*)
- multidirs="soft-float"
- ;;
-m68*-*-aout* | m68*-*-coff* | m68*-*-elf* | m68*-*-vxworks*)
- multidirs="m68000 m68020 m68881 msoft-float m68000/m68881 m68000/msoft-float m68020/m68881 m68020/msoft-float"
- ;;
-i960-*-*)
- multidirs=float
- ;;
-sparclite-*-* | sparclitefrw*-*-*)
- multidirs="mfpu msoft-float mflat mno-flat mfpu/mflat mfpu/mno-flat msoft-float/mflat msoft-float/mno-flat"
- ;;
-sparc-*-* | sparcfrw*-*-*)
- multidirs="soft v8 soft/v8"
- ;;
-z8k-*-coff)
- multidirs="z8001 std z8001/std"
- ;;
-h8300-*-*)
- multidirs=h8300h
- ;;
-h8500-*-*)
- multidirs="mbig msmall mcompact mmedium"
- ;;
-# start-sanitize-jaguar
-jaguar-*-*)
- multidirs="be"
- ;;
-# end-sanitize-jaguar
-sh-*-*)
- multidirs="ml m2 ml/m2"
-# start-sanitize-sh3e
- multidirs="ml m2 ml/m2 m3e ml/m3e"
-# end-sanitize-sh3e
- ;;
-mips*-*-*)
- # Note that not all of these will be built for a particular
- # target; what is build depends upon the output gcc
- # --print-multi-lib. We configure them all, to make our life
- # simpler here. If somebody cares about configuration
- # efficiency, they will need to switch off on the various
- # targets to configure just the directories needed for that
- # target.
- #
- # In the long run, it would be better to configure based on
- # the output of gcc --print-multi-lib, but, to do that, we
- # would have to build gcc before configuring newlib.
- #
- # Default to including the single-float directories.
- if [ x$enable_single_float = x ]; then
- enable_single_float=yes
+ if [ x"$enable_26bit" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *26bit*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
fi
- if [ x$enable_single_float = xyes ]; then
- multidirs="soft-float single el eb mips1 mips3 soft-float/el soft-float/eb soft-float/mips1 soft-float/mips3 soft-float/el/mips1 soft-float/el/mips3 soft-float/eb/mips1 soft-float/eb/mips3 single/el single/eb single/mips1 single/mips3 single/el/mips1 single/el/mips3 single/eb/mips1 single/eb/mips3 el/mips1 el/mips3 eb/mips1 eb/mips3"
- else
- multidirs="soft-float el eb mips1 mips3 soft-float/el soft-float/eb soft-float/mips1 soft-float/mips3 soft-float/el/mips1 soft-float/el/mips3 soft-float/eb/mips1 soft-float/eb/mips3 el/mips1 el/mips3 eb/mips1 eb/mips3"
+ if [ x"$enable_underscore" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *under*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_interwork" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *interwork*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
fi
if [ x$enable_biendian = xno ]
then
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *endian* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *le* ) : ;;
+ *be* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_softfloat = xno ]
+ if [ x"$enable_nofmult" = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *soft-float* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *nofmult* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_relocatable = xno ]
+ ;;
+m68*-*-*)
+ if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *relocatable* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_sysv = xno ]
+ if [ x$enable_m68881 = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *sysv* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *m68881* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- ;;
-powerpc-ibm-aix* | rs6000-ibm-aix*)
- multidirs="soft-float common soft-float/common"
- if [ x$enable_softfloat = xno ]
+ if [ x$enable_m68000 = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *soft-float* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *m68000* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_commoncpu = xno ]
+ if [ x$enable_m68020 = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *common* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *m68020* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
;;
-powerpc-*-eabiaix*)
- multidirs="soft-float relocatable little sysv little/sysv relocatable/little relocatable/sysv relocatable/little/sysv soft-float/relocatable soft-float/little soft-float/sysv soft-float/little/sysv soft-float/relocatable/little soft-float/relocatable/sysv soft-float/relocatable/little/sysv"
- if [ x$enable_biendian = xno ]
+mips*-*-*)
+ if [ x$enable_single_float = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *endian* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *single* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_softfloat = xno ]
+ if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *soft-float* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *el* ) : ;;
+ *eb* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_relocatable = xno ]
+ if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *relocatable* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_sysv = xno ]
+ ;;
+msp430-*-*)
+ if [ x$enable_no_exceptions = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *sysv* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *no-exceptions* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
;;
-powerpc-*-eabi* | powerpc-*-elf* | powerpc-*-sysv4*)
- multidirs="soft-float relocatable little aix little/aix relocatable/little relocatable/aix relocatable/little/aix soft-float/relocatable soft-float/little soft-float/aix soft-float/little/aix soft-float/relocatable/little soft-float/relocatable/aix soft-float/relocatable/little/aix aixdesc soft-float/aixdesc"
- if [ x$enable_biendian = xno ]
+powerpc*-*-* | rs6000*-*-*)
+ if [ x$enable_aix64 = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *endian* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *ppc64* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_softfloat = xno ]
+ if [ x$enable_pthread = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *soft-float* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *pthread* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_relocatable = xno ]
+ if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *relocatable* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_aix = xno ]
+ if [ x$enable_powercpu = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *aix* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ power | */power | */power/* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- ;;
-powerpcle-*-eabi* | powerpcle-*-elf* | powerpcle-*-sysv4*)
- multidirs="soft-float relocatable big aix big/aix relocatable/big relocatable/aix relocatable/big/aix soft-float/relocatable soft-float/big soft-float/aix soft-float/big/aix soft-float/relocatable/big soft-float/relocatable/aix soft-float/relocatable/big/aix"
- if [ x$enable_biendian = xno ]
+ if [ x$enable_powerpccpu = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *endian* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *powerpc* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_softfloat = xno ]
+ if [ x$enable_powerpcos = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *soft-float* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *mcall-linux* | *mcall-solaris* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_relocatable = xno ]
+ if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *relocatable* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *mlittle* | *mbig* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
- if [ x$enable_aix = xno ]
+ if [ x$enable_sysv = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
- *aix* ) : ;;
- *) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
+ *mcall-sysv* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
esac
done
fi
;;
-*)
- multidirs=
- ;;
esac
+# Remove extraneous blanks from multidirs.
+# Tests like `if [ -n "$multidirs" ]' require it.
+multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'`
+
# Add code to library's top level makefile to handle building the multilib
# subdirs.
cat > Multi.tem <<\EOF
-# FIXME: There should be an @-sign in front of the `if'.
-# Leave out until this is tested a bit more.
+PWD_COMMAND=$${PWDCMD-pwd}
+
multi-do:
- if [ -z "$(MULTIDIRS)" ]; then \
+ @if [ -z "$(MULTIDIRS)" ]; then \
true; \
else \
- rootpre=`pwd`/; export rootpre; \
- srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
- lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
+ rootpre=`${PWD_COMMAND}`/; export rootpre; \
+ srcrootpre=`cd $(srcdir); ${PWD_COMMAND}`/; export srcrootpre; \
+ lib=`echo "$${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
compiler="$(CC)"; \
for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(CFLAGS) $${flags}" \
+ CCASFLAGS="$(CCASFLAGS) $${flags}" \
+ FCFLAGS="$(FCFLAGS) $${flags}" \
+ FFLAGS="$(FFLAGS) $${flags}" \
+ ADAFLAGS="$(ADAFLAGS) $${flags}" \
+ prefix="$(prefix)" \
+ exec_prefix="$(exec_prefix)" \
+ GOCFLAGS="$(GOCFLAGS) $${flags}" \
+ GDCFLAGS="$(GDCFLAGS) $${flags}" \
CXXFLAGS="$(CXXFLAGS) $${flags}" \
LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
+ LDFLAGS="$(LDFLAGS) $${flags}" \
+ MULTIFLAGS="$${flags}" \
+ DESTDIR="$(DESTDIR)" \
+ INSTALL="$(INSTALL)" \
+ INSTALL_DATA="$(INSTALL_DATA)" \
+ INSTALL_PROGRAM="$(INSTALL_PROGRAM)" \
+ INSTALL_SCRIPT="$(INSTALL_SCRIPT)" \
$(DO)); then \
true; \
else \
done; \
fi
-# FIXME: There should be an @-sign in front of the `if'.
-# Leave out until this is tested a bit more.
multi-clean:
- if [ -z "$(MULTIDIRS)" ]; then \
+ @if [ -z "$(MULTIDIRS)" ]; then \
true; \
else \
- lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
- for dir in Makefile $(MULTIDIRS); do \
- if [ -f ../$${dir}/$${lib}/Makefile ]; then \
+ lib=`${PWD_COMMAND} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
+ for dir in : $(MULTIDIRS); do \
+ test $$dir != : || continue; \
+EOF
+cat >>Multi.tem <<EOF
+ if [ -f ../\$\${dir}/\$\${lib}/${Makefile} ]; then \\
+EOF
+cat >>Multi.tem <<\EOF
if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
then true; \
else exit 1; \
fi # ${ml_toplevel_p} = yes
if [ "${ml_verbose}" = --verbose ]; then
- echo "Adding multilib support to Makefile in `pwd`"
+ echo "Adding multilib support to ${Makefile} in ${ml_realsrcdir}"
if [ "${ml_toplevel_p}" = yes ]; then
echo "multidirs=${multidirs}"
fi
if [ "${ml_verbose}" = --verbose ]; then
echo "Running configure in multilib subdirs ${multidirs}"
- echo "pwd: `pwd`"
+ echo "pwd: `${PWDCMD-pwd}`"
fi
- ml_origdir=`pwd`
- ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
+ ml_origdir=`${PWDCMD-pwd}`
+ ml_libdir=`echo "$ml_origdir" | sed -e 's,^.*/,,'`
# cd to top-level-build-dir/${with_target_subdir}
cd ..
if [ "${ml_verbose}" = --verbose ]; then
echo "Running configure in multilib subdir ${ml_dir}"
- echo "pwd: `pwd`"
+ echo "pwd: `${PWDCMD-pwd}`"
fi
- if [ -d ${ml_dir} ]; then true; else mkdir ${ml_dir}; fi
+ if [ -d ${ml_dir} ]; then true; else
+ # ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
+ pathcomp=""
+ for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
+ pathcomp="$pathcomp$d"
+ case "$pathcomp" in
+ -* ) pathcomp=./$pathcomp ;;
+ esac
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp" 1>&2
+ mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
+ fi
+ if test ! -d "$pathcomp"; then
+ exit $lasterr
+ fi
+ pathcomp="$pathcomp/"
+ done
+ fi
if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
# Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
case ${srcdir} in
".")
- echo Building symlink tree in `pwd`/${ml_dir}/${ml_libdir}
+ echo "Building symlink tree in `${PWDCMD-pwd}`/${ml_dir}/${ml_libdir}"
if [ "${with_target_subdir}" != "." ]; then
ml_unsubdir="../"
else
fi
(cd ${ml_dir}/${ml_libdir};
../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
+ if [ -f ${ml_dir}/${ml_libdir}/${Makefile} ]; then
+ if [ x"${MAKE}" = x ]; then
+ (cd ${ml_dir}/${ml_libdir}; make distclean)
+ else
+ (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
+ fi
+ fi
ml_newsrcdir="."
ml_srcdiroption=
multisrctop=${dotdot}
;;
*)
case "${srcdir}" in
- /*) # absolute path
+ /* | [A-Za-z]:[\\/]* ) # absolute path
ml_newsrcdir=${srcdir}
;;
*) # otherwise relative
esac
case "${progname}" in
- /*) ml_recprog=${progname} ;;
+ /* | [A-Za-z]:[\\/]* ) ml_recprog=${progname} ;;
*) ml_recprog=${dotdot}${progname} ;;
esac
# FIXME: POPDIR=${PWD=`pwd`} doesn't work here.
- ML_POPDIR=`pwd`
+ ML_POPDIR=`${PWDCMD-pwd}`
cd ${ml_dir}/${ml_libdir}
if [ -f ${ml_newsrcdir}/configure ]; then
- ml_recprog=${ml_newsrcdir}/configure
+ ml_recprog="${ml_newsrcdir}/configure"
fi
- if eval ${ml_config_shell} ${ml_recprog} \
+
+ # find compiler flag corresponding to ${ml_dir}
+ for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
+ dir=`echo $i | sed -e 's/;.*$//'`
+ if [ "${dir}" = "${ml_dir}" ]; then
+ flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
+ break
+ fi
+ done
+ ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags" F77="${F77_}$flags" GFORTRAN="${GFORTRAN_}$flags" GOC="${GOC_}$flags" GDC="${GDC_}$flags"'
+
+ if [ "${with_target_subdir}" = "." ]; then
+ CC_=$CC' '
+ CXX_=$CXX' '
+ F77_=$F77' '
+ GFORTRAN_=$GFORTRAN' '
+ GOC_=$GOC' '
+ GDC_=$GDC' '
+ else
+ # Create a regular expression that matches any string as long
+ # as ML_POPDIR.
+ popdir_rx=`echo "${ML_POPDIR}" | sed 's,.,.,g'`
+ CC_=
+ for arg in ${CC}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ CC_="${CC_}${arg} " ;;
+ esac
+ done
+
+ CXX_=
+ for arg in ${CXX}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ CXX_="${CXX_}${arg} " ;;
+ esac
+ done
+
+ F77_=
+ for arg in ${F77}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ F77_="${F77_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ F77_="${F77_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ F77_="${F77_}${arg} " ;;
+ esac
+ done
+
+ GFORTRAN_=
+ for arg in ${GFORTRAN}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ GFORTRAN_="${GFORTRAN_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ GFORTRAN_="${GFORTRAN_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ GFORTRAN_="${GFORTRAN_}${arg} " ;;
+ esac
+ done
+
+ GOC_=
+ for arg in ${GOC}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ GOC_="${GOC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ GOC_="${GOC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ GOC_="${GOC_}${arg} " ;;
+ esac
+ done
+
+ GDC_=
+ for arg in ${GDC}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ GDC_="${GDC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ GDC_="${GDC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ GDC_="${GDC_}${arg} " ;;
+ esac
+ done
+
+ if test "x${LD_LIBRARY_PATH+set}" = xset; then
+ LD_LIBRARY_PATH_=
+ for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
+ case "$arg" in
+ "${ML_POPDIR}"/*)
+ arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
+ ;;
+ esac
+ if test "x$LD_LIBRARY_PATH_" != x; then
+ LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
+ else
+ LD_LIBRARY_PATH_=$arg
+ fi
+ done
+ ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
+ fi
+
+ if test "x${SHLIB_PATH+set}" = xset; then
+ SHLIB_PATH_=
+ for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
+ case "$arg" in
+ "${ML_POPDIR}"/*)
+ arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
+ ;;
+ esac
+ if test "x$SHLIB_PATH_" != x; then
+ SHLIB_PATH_=$SHLIB_PATH_:$arg
+ else
+ SHLIB_PATH_=$arg
+ fi
+ done
+ ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
+ fi
+ fi
+
+ if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
--with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
- ${ml_arguments} ${ml_srcdiroption} ; then
+ "${ac_configure_args}" ${ml_config_env} ${ml_srcdiroption} ; then
true
else
exit 1
fi
- cd ${ML_POPDIR}
+ cd "${ML_POPDIR}"
done
- cd ${ml_origdir}
+ cd "${ml_origdir}"
fi
fi # ${ml_toplevel_p} = yes