-# Copyright (c) 2012 ARM Limited
+# Copyright (c) 2012-2013 ARM Limited
# All rights reserved
-#
+#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-# Authors: Lisa Hsu
+from __future__ import print_function
+from __future__ import absolute_import
+
+import six
import sys
from os import getcwd
from os.path import join as joinpath
-import CpuConfig
+from common import CpuConfig
+from common import ObjectList
import m5
from m5.defines import buildEnv
from m5.objects import *
from m5.util import *
+if six.PY3:
+ long = int
+
addToPath('../common')
def getCPUClass(cpu_type):
"""Returns the required cpu class and the mode of operation."""
- cls = CpuConfig.get(cpu_type)
+ cls = ObjectList.cpu_list.get(cpu_type)
return cls, cls.memory_mode()
def setCPUClass(options):
TmpClass = AtomicSimpleCPU
test_mem_mode = 'atomic'
+ # Ruby only supports atomic accesses in noncaching mode
+ if test_mem_mode == 'atomic' and options.ruby:
+ warn("Memory mode will be changed to atomic_noncaching")
+ test_mem_mode = 'atomic_noncaching'
+
return (TmpClass, test_mem_mode, CPUClass)
+def setMemClass(options):
+ """Returns a memory controller class."""
+
+ return ObjectList.mem_list.get(options.mem_type)
+
def setWorkCountOptions(system, options):
if options.work_item_id != None:
system.work_item_id = options.work_item_id
+ if options.num_work_ids != None:
+ system.num_work_ids = options.num_work_ids
if options.work_begin_cpu_id_exit != None:
system.work_begin_cpu_id_exit = options.work_begin_cpu_id_exit
if options.work_end_exit_count != None:
if options.work_cpus_checkpoint_count != None:
system.work_cpus_ckpt_count = options.work_cpus_checkpoint_count
-def findCptDir(options, maxtick, cptdir, testsys):
+def findCptDir(options, cptdir, testsys):
"""Figures out the directory from which the checkpointed state is read.
There are two different ways in which the directories holding checkpoints
This function parses through the options to figure out which one of the
above should be used for selecting the checkpoint, and then figures out
the appropriate directory.
-
- It also sets the value of the maximum tick value till which the simulation
- will run.
"""
from os.path import isdir, exists
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
+ cpt_starttick = 0
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
checkpoint_dir = joinpath(cptdir, "cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
+
+ elif options.restore_simpoint_checkpoint:
+ # Restore from SimPoint checkpoints
+ # Assumes that the checkpoint dir names are formatted as follows:
+ dirs = listdir(cptdir)
+ expr = re.compile('cpt\.simpoint_(\d+)_inst_(\d+)' +
+ '_weight_([\d\.e\-]+)_interval_(\d+)_warmup_(\d+)')
+ cpts = []
+ for dir in dirs:
+ match = expr.match(dir)
+ if match:
+ cpts.append(dir)
+ cpts.sort()
+
+ cpt_num = options.checkpoint_restore
+ if cpt_num > len(cpts):
+ fatal('Checkpoint %d not found', cpt_num)
+ checkpoint_dir = joinpath(cptdir, cpts[cpt_num - 1])
+ match = expr.match(cpts[cpt_num - 1])
+ if match:
+ index = int(match.group(1))
+ start_inst = int(match.group(2))
+ weight_inst = float(match.group(3))
+ interval_length = int(match.group(4))
+ warmup_length = int(match.group(5))
+ print("Resuming from", checkpoint_dir)
+ simpoint_start_insts = []
+ simpoint_start_insts.append(warmup_length)
+ simpoint_start_insts.append(warmup_length + interval_length)
+ testsys.cpu[0].simpoint_start_insts = simpoint_start_insts
+ if testsys.switch_cpus != None:
+ testsys.switch_cpus[0].simpoint_start_insts = simpoint_start_insts
+
+ print("Resuming from SimPoint", end=' ')
+ print("#%d, start_inst:%d, weight:%f, interval:%d, warmup:%d" %
+ (index, start_inst, weight_inst, interval_length, warmup_length))
+
else:
dirs = listdir(cptdir)
- expr = re.compile('cpt\.([0-9]*)')
+ expr = re.compile('cpt\.([0-9]+)')
cpts = []
for dir in dirs:
match = expr.match(dir)
if cpt_num > len(cpts):
fatal('Checkpoint %d not found', cpt_num)
- maxtick = maxtick - int(cpts[cpt_num - 1])
+ cpt_starttick = int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
- return maxtick, checkpoint_dir
+ return cpt_starttick, checkpoint_dir
def scriptCheckpoints(options, maxtick, cptdir):
if options.at_instruction or options.simpoint:
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
- print "Creating checkpoint at inst:%d" % (checkpoint_inst)
+ print("Creating checkpoint at inst:%d" % (checkpoint_inst))
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
- print "exit cause = %s" % exit_cause
+ print("exit cause = %s" % exit_cause)
# skip checkpoint instructions should they exist
while exit_cause == "checkpoint":
if exit_cause == "a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
- print "Checkpoint written."
+ print("Checkpoint written.")
else:
when, period = options.take_checkpoints.split(",", 1)
period = int(period)
num_checkpoints = 0
- exit_event = m5.simulate(when)
+ exit_event = m5.simulate(when - m5.curTick())
exit_cause = exit_event.getCause()
while exit_cause == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
- return exit_cause
+ return exit_event
def benchCheckpoints(options, maxtick, cptdir):
- exit_event = m5.simulate(maxtick)
+ exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
num_checkpoints = 0
return exit_event
+# Set up environment for taking SimPoint checkpoints
+# Expecting SimPoint files generated by SimPoint 3.2
+def parseSimpointAnalysisFile(options, testsys):
+ import re
+
+ simpoint_filename, weight_filename, interval_length, warmup_length = \
+ options.take_simpoint_checkpoints.split(",", 3)
+ print("simpoint analysis file:", simpoint_filename)
+ print("simpoint weight file:", weight_filename)
+ print("interval length:", interval_length)
+ print("warmup length:", warmup_length)
+
+ interval_length = int(interval_length)
+ warmup_length = int(warmup_length)
+
+ # Simpoint analysis output starts interval counts with 0.
+ simpoints = []
+ simpoint_start_insts = []
+
+ # Read in SimPoint analysis files
+ simpoint_file = open(simpoint_filename)
+ weight_file = open(weight_filename)
+ while True:
+ line = simpoint_file.readline()
+ if not line:
+ break
+ m = re.match("(\d+)\s+(\d+)", line)
+ if m:
+ interval = int(m.group(1))
+ else:
+ fatal('unrecognized line in simpoint file!')
+
+ line = weight_file.readline()
+ if not line:
+ fatal('not enough lines in simpoint weight file!')
+ m = re.match("([0-9\.e\-]+)\s+(\d+)", line)
+ if m:
+ weight = float(m.group(1))
+ else:
+ fatal('unrecognized line in simpoint weight file!')
+
+ if (interval * interval_length - warmup_length > 0):
+ starting_inst_count = \
+ interval * interval_length - warmup_length
+ actual_warmup_length = warmup_length
+ else:
+ # Not enough room for proper warmup
+ # Just starting from the beginning
+ starting_inst_count = 0
+ actual_warmup_length = interval * interval_length
+
+ simpoints.append((interval, weight, starting_inst_count,
+ actual_warmup_length))
+
+ # Sort SimPoints by starting inst count
+ simpoints.sort(key=lambda obj: obj[2])
+ for s in simpoints:
+ interval, weight, starting_inst_count, actual_warmup_length = s
+ print(str(interval), str(weight), starting_inst_count,
+ actual_warmup_length)
+ simpoint_start_insts.append(starting_inst_count)
+
+ print("Total # of simpoints:", len(simpoints))
+ testsys.cpu[0].simpoint_start_insts = simpoint_start_insts
+
+ return (simpoints, interval_length)
+
+def takeSimpointCheckpoints(simpoints, interval_length, cptdir):
+ num_checkpoints = 0
+ index = 0
+ last_chkpnt_inst_count = -1
+ for simpoint in simpoints:
+ interval, weight, starting_inst_count, actual_warmup_length = simpoint
+ if starting_inst_count == last_chkpnt_inst_count:
+ # checkpoint starting point same as last time
+ # (when warmup period longer than starting point)
+ exit_cause = "simpoint starting point found"
+ code = 0
+ else:
+ exit_event = m5.simulate()
+
+ # skip checkpoint instructions should they exist
+ while exit_event.getCause() == "checkpoint":
+ print("Found 'checkpoint' exit event...ignoring...")
+ exit_event = m5.simulate()
+
+ exit_cause = exit_event.getCause()
+ code = exit_event.getCode()
+
+ if exit_cause == "simpoint starting point found":
+ m5.checkpoint(joinpath(cptdir,
+ "cpt.simpoint_%02d_inst_%d_weight_%f_interval_%d_warmup_%d"
+ % (index, starting_inst_count, weight, interval_length,
+ actual_warmup_length)))
+ print("Checkpoint #%d written. start inst:%d weight:%f" %
+ (num_checkpoints, starting_inst_count, weight))
+ num_checkpoints += 1
+ last_chkpnt_inst_count = starting_inst_count
+ else:
+ break
+ index += 1
+
+ print('Exiting @ tick %i because %s' % (m5.curTick(), exit_cause))
+ print("%d checkpoints taken" % num_checkpoints)
+ sys.exit(code)
+
+def restoreSimpointCheckpoint():
+ exit_event = m5.simulate()
+ exit_cause = exit_event.getCause()
+
+ if exit_cause == "simpoint starting point found":
+ print("Warmed up! Dumping and resetting stats!")
+ m5.stats.dump()
+ m5.stats.reset()
+
+ exit_event = m5.simulate()
+ exit_cause = exit_event.getCause()
+
+ if exit_cause == "simpoint starting point found":
+ print("Done running SimPoint!")
+ sys.exit(exit_event.getCode())
+
+ print('Exiting @ tick %i because %s' % (m5.curTick(), exit_cause))
+ sys.exit(exit_event.getCode())
+
def repeatSwitch(testsys, repeat_switch_cpu_list, maxtick, switch_freq):
- print "starting switch loop"
+ print("starting switch loop")
while True:
exit_event = m5.simulate(switch_freq)
exit_cause = exit_event.getCause()
return exit_event
def run(options, root, testsys, cpu_class):
- if options.maxtick:
- maxtick = options.maxtick
- elif options.maxtime:
- simtime = m5.ticks.seconds(simtime)
- print "simulating for: ", simtime
- maxtick = simtime
- else:
- maxtick = m5.MaxTick
-
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
switch_cpus = None
if options.prog_interval:
- for i in xrange(np):
+ for i in range(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
- for i in xrange(np):
+ for i in range(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(switched_out=True, cpu_id=(i))
- for i in xrange(np)]
+ for i in range(np)]
- for i in xrange(np):
+ for i in range(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
- switch_cpus[i].system = testsys
+ switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
- switch_cpus[i].clock = testsys.cpu[i].clock
+ switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
+ switch_cpus[i].progress_interval = \
+ testsys.cpu[i].progress_interval
+ switch_cpus[i].isa = testsys.cpu[i].isa
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
+ if options.bp_type:
+ bpClass = ObjectList.bp_list.get(options.bp_type)
+ switch_cpus[i].branchPred = bpClass()
+ if options.indirect_bp_type:
+ IndirectBPClass = ObjectList.indirect_bp_list.get(
+ options.indirect_bp_type)
+ switch_cpus[i].branchPred.indirectBranchPred = \
+ IndirectBPClass()
+
+ # If elastic tracing is enabled attach the elastic trace probe
+ # to the switch CPUs
+ if options.elastic_trace_en:
+ CpuConfig.config_etrace(cpu_class, switch_cpus, options)
testsys.switch_cpus = switch_cpus
- switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
+ switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in range(np)]
if options.repeat_switch:
switch_class = getCPUClass(options.cpu_type)[0]
if switch_class.require_caches() and \
not options.caches:
- print "%s: Must be used with caches" % str(switch_class)
+ print("%s: Must be used with caches" % str(switch_class))
sys.exit(1)
if not switch_class.support_take_over():
- print "%s: CPU switching not supported" % str(switch_class)
+ print("%s: CPU switching not supported" % str(switch_class))
sys.exit(1)
repeat_switch_cpus = [switch_class(switched_out=True, \
- cpu_id=(i)) for i in xrange(np)]
+ cpu_id=(i)) for i in range(np)]
- for i in xrange(np):
+ for i in range(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
- repeat_switch_cpus[i].clock = testsys.cpu[i].clock
+ repeat_switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
+ repeat_switch_cpus[i].isa = testsys.cpu[i].isa
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
- for i in xrange(np)]
+ for i in range(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
- for i in xrange(np)]
+ for i in range(np)]
if options.standard_switch:
switch_cpus = [TimingSimpleCPU(switched_out=True, cpu_id=(i))
- for i in xrange(np)]
+ for i in range(np)]
switch_cpus_1 = [DerivO3CPU(switched_out=True, cpu_id=(i))
- for i in xrange(np)]
+ for i in range(np)]
- for i in xrange(np):
+ for i in range(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
- switch_cpus[i].clock = testsys.cpu[i].clock
- switch_cpus_1[i].clock = testsys.cpu[i].clock
+ switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
+ switch_cpus_1[i].clk_domain = testsys.cpu[i].clk_domain
+ switch_cpus[i].isa = testsys.cpu[i].isa
+ switch_cpus_1[i].isa = testsys.cpu[i].isa
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
- switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
- switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
+ switch_cpu_list = [
+ (testsys.cpu[i], switch_cpus[i]) for i in range(np)
+ ]
+ switch_cpu_list1 = [
+ (switch_cpus[i], switch_cpus_1[i]) for i in range(np)
+ ]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
- for i in xrange(np):
+ for i in range(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
- for i in xrange(np):
+ for i in range(np):
testsys.cpu[i].max_insts_any_thread = offset
+ if options.take_simpoint_checkpoints != None:
+ simpoints, interval_length = parseSimpointAnalysisFile(options, testsys)
+
checkpoint_dir = None
- if options.checkpoint_restore != None:
- maxtick, checkpoint_dir = findCptDir(options, maxtick, cptdir, testsys)
+ if options.checkpoint_restore:
+ cpt_starttick, checkpoint_dir = findCptDir(options, cptdir, testsys)
+ root.apply_config(options.param)
m5.instantiate(checkpoint_dir)
+ # Initialization is complete. If we're not in control of simulation
+ # (that is, if we're a slave simulator acting as a component in another
+ # 'master' simulator) then we're done here. The other simulator will
+ # call simulate() directly. --initialize-only is used to indicate this.
+ if options.initialize_only:
+ return
+
+ # Handle the max tick settings now that tick frequency was resolved
+ # during system instantiation
+ # NOTE: the maxtick variable here is in absolute ticks, so it must
+ # include any simulated ticks before a checkpoint
+ explicit_maxticks = 0
+ maxtick_from_abs = m5.MaxTick
+ maxtick_from_rel = m5.MaxTick
+ maxtick_from_maxtime = m5.MaxTick
+ if options.abs_max_tick:
+ maxtick_from_abs = options.abs_max_tick
+ explicit_maxticks += 1
+ if options.rel_max_tick:
+ maxtick_from_rel = options.rel_max_tick
+ if options.checkpoint_restore:
+ # NOTE: this may need to be updated if checkpoints ever store
+ # the ticks per simulated second
+ maxtick_from_rel += cpt_starttick
+ if options.at_instruction or options.simpoint:
+ warn("Relative max tick specified with --at-instruction or" \
+ " --simpoint\n These options don't specify the " \
+ "checkpoint start tick, so assuming\n you mean " \
+ "absolute max tick")
+ explicit_maxticks += 1
+ if options.maxtime:
+ maxtick_from_maxtime = m5.ticks.fromSeconds(options.maxtime)
+ explicit_maxticks += 1
+ if explicit_maxticks > 1:
+ warn("Specified multiple of --abs-max-tick, --rel-max-tick, --maxtime."\
+ " Using least")
+ maxtick = min([maxtick_from_abs, maxtick_from_rel, maxtick_from_maxtime])
+
+ if options.checkpoint_restore != None and maxtick < cpt_starttick:
+ fatal("Bad maxtick (%d) specified: " \
+ "Checkpoint starts starts from tick: %d", maxtick, cpt_starttick)
+
if options.standard_switch or cpu_class:
if options.standard_switch:
- print "Switch at instruction count:%s" % \
- str(testsys.cpu[0].max_insts_any_thread)
+ print("Switch at instruction count:%s" %
+ str(testsys.cpu[0].max_insts_any_thread))
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
- print "Switch at instruction count:%s" % \
- str(testsys.cpu[0].max_insts_any_thread)
+ print("Switch at instruction count:%s" %
+ str(testsys.cpu[0].max_insts_any_thread))
exit_event = m5.simulate()
else:
- print "Switch at curTick count:%s" % str(10000)
+ print("Switch at curTick count:%s" % str(10000))
exit_event = m5.simulate(10000)
- print "Switched CPUS @ tick %s" % (m5.curTick())
+ print("Switched CPUS @ tick %s" % (m5.curTick()))
m5.switchCpus(testsys, switch_cpu_list)
if options.standard_switch:
- print "Switch at instruction count:%d" % \
- (testsys.switch_cpus[0].max_insts_any_thread)
+ print("Switch at instruction count:%d" %
+ (testsys.switch_cpus[0].max_insts_any_thread))
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
- print "Switching CPUS @ tick %s" % (m5.curTick())
- print "Simulation ends instruction count:%d" % \
- (testsys.switch_cpus_1[0].max_insts_any_thread)
+ print("Switching CPUS @ tick %s" % (m5.curTick()))
+ print("Simulation ends instruction count:%d" %
+ (testsys.switch_cpus_1[0].max_insts_any_thread))
m5.switchCpus(testsys, switch_cpu_list1)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
- if options.take_checkpoints and options.checkpoint_restore:
+ if (options.take_checkpoints or options.take_simpoint_checkpoints) \
+ and options.checkpoint_restore:
+
if m5.options.outdir:
cptdir = m5.options.outdir
else:
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
- exit_cause = scriptCheckpoints(options, maxtick, cptdir)
+ exit_event = scriptCheckpoints(options, maxtick, cptdir)
+
+ # Take SimPoint checkpoints
+ elif options.take_simpoint_checkpoints != None:
+ takeSimpointCheckpoints(simpoints, interval_length, cptdir)
+
+ # Restore from SimPoint checkpoints
+ elif options.restore_simpoint_checkpoint != None:
+ restoreSimpointCheckpoint()
+
else:
if options.fast_forward:
m5.stats.reset()
- print "**** REAL SIMULATION ****"
+ print("**** REAL SIMULATION ****")
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
else:
exit_event = benchCheckpoints(options, maxtick, cptdir)
- print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause())
+ print('Exiting @ tick %i because %s' %
+ (m5.curTick(), exit_event.getCause()))
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
- if not m5.options.interactive:
- sys.exit(exit_event.getCode())
+ if exit_event.getCode() != 0:
+ print("Simulated exit code not 0! Exit code is", exit_event.getCode())