# Any additions from configure.in:
ac_help="$ac_help
--enable-libada Builds libada directory"
+ac_help="$ac_help
+ --enable-libssp Builds libssp directory"
ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:595: checking host system type" >&5
+echo "configure:597: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:616: checking target system type" >&5
+echo "configure:618: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:634: checking build system type" >&5
+echo "configure:636: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:689: checking for a BSD compatible install" >&5
+echo "configure:691: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:742: checking whether ln works" >&5
+echo "configure:744: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:766: checking whether ln -s works" >&5
+echo "configure:768: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
target-newlib \
target-libstdc++-v3 \
target-libmudflap \
+ target-libssp \
target-libgfortran \
${libgcj} \
target-libobjc \
configdirs="$configdirs libtermcap" ;;
esac
+# A target can indicate whether a language isn't supported for some reason.
+# Only spaces may be used in this macro; not newlines or tabs.
+unsupported_languages=
+
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
noconfigdirs="$noconfigdirs gnattools"
fi
+# Check whether --enable-libssp or --disable-libssp was given.
+if test "${enable_libssp+set}" = set; then
+ enableval="$enable_libssp"
+ ENABLE_LIBSSP=$enableval
+else
+ ENABLE_LIBSSP=yes
+fi
+
+if test "${ENABLE_LIBSSP}" != "yes" ; then
+ noconfigdirs="$noconfigdirs target-libssp"
+fi
+
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ # The tpf target doesn't support gdb yet.
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ ;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
cris-*-* | crisv32-*-*)
- libgcj_ex_libffi=`echo ${libgcj} | sed -e 's/target-libffi//'`
+ unsupported_languages="$unsupported_languages java"
case "${target}" in
*-*-aout)
- noconfigdirs="$noconfigdirs ${libgcj}";;
+ unsupported_languages="$unsupported_languages f95"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj_ex_libffi}";;
+ unsupported_languages="$unsupported_languages f95"
+ noconfigdirs="$noconfigdirs target-boehm-gc";;
*-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj_ex_libffi} target-newlib target-libgloss";;
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
+ unsupported_languages="$unsupported_languages f95"
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
esac
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
+ unsupported_languages="$unsupported_languages f95 java"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1785: checking for $ac_word" >&5
+echo "configure:1814: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1815: checking for $ac_word" >&5
+echo "configure:1844: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1866: checking for $ac_word" >&5
+echo "configure:1895: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1898: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1927: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1909 "configure"
+#line 1938 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1943: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1940: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1969: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1945: checking whether we are using GNU C" >&5
+echo "configure:1974: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1954: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1983: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1973: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2002: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2040: checking for $ac_word" >&5
+echo "configure:2069: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2072: checking for $ac_word" >&5
+echo "configure:2101: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2105: checking whether compiler driver understands Ada" >&5
+echo "configure:2134: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2137: checking how to compare bootstrapped objects" >&5
+echo "configure:2166: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2235: checking for correct version of gmp.h" >&5
+echo "configure:2264: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2237 "configure"
+#line 2266 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2248: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2277: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2261: checking for MPFR" >&5
+echo "configure:2290: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2266 "configure"
+#line 2295 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
add_this_lang=no
;;
esac
-
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=no
+ ;;
+ esac
+
case $add_this_lang in
no)
# Remove language-dependent dirs.
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2761: checking for $ac_word" >&5
+echo "configure:2797: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2796: checking for $ac_word" >&5
+echo "configure:2832: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2831: checking for $ac_word" >&5
+echo "configure:2867: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2866: checking for $ac_word" >&5
+echo "configure:2902: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2901: checking for $ac_word" >&5
+echo "configure:2937: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2936: checking for $ac_word" >&5
+echo "configure:2972: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3543: checking for $ac_word" >&5
+echo "configure:3579: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3576: checking for $ac_word" >&5
+echo "configure:3612: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3615: checking for $ac_word" >&5
+echo "configure:3651: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3648: checking for $ac_word" >&5
+echo "configure:3684: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3687: checking for $ac_word" >&5
+echo "configure:3723: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3720: checking for $ac_word" >&5
+echo "configure:3756: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3759: checking for $ac_word" >&5
+echo "configure:3795: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3792: checking for $ac_word" >&5
+echo "configure:3828: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3831: checking for $ac_word" >&5
+echo "configure:3867: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3864: checking for $ac_word" >&5
+echo "configure:3900: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3903: checking for $ac_word" >&5
+echo "configure:3939: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3936: checking for $ac_word" >&5
+echo "configure:3972: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3975: checking for $ac_word" >&5
+echo "configure:4011: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4008: checking for $ac_word" >&5
+echo "configure:4044: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4047: checking for $ac_word" >&5
+echo "configure:4083: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4080: checking for $ac_word" >&5
+echo "configure:4116: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4119: checking for $ac_word" >&5
+echo "configure:4155: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4152: checking for $ac_word" >&5
+echo "configure:4188: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4198: checking for $ac_word" >&5
+echo "configure:4234: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4231: checking for $ac_word" >&5
+echo "configure:4267: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4270: checking for $ac_word" >&5
+echo "configure:4306: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4303: checking for $ac_word" >&5
+echo "configure:4339: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4342: checking for $ac_word" >&5
+echo "configure:4378: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4375: checking for $ac_word" >&5
+echo "configure:4411: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4414: checking for $ac_word" >&5
+echo "configure:4450: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4447: checking for $ac_word" >&5
+echo "configure:4483: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4486: checking for $ac_word" >&5
+echo "configure:4522: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4519: checking for $ac_word" >&5
+echo "configure:4555: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4558: checking for $ac_word" >&5
+echo "configure:4594: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4591: checking for $ac_word" >&5
+echo "configure:4627: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4630: checking for $ac_word" >&5
+echo "configure:4666: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4663: checking for $ac_word" >&5
+echo "configure:4699: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4748: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4784: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4795: checking if symbolic links between directories work" >&5
+echo "configure:4831: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
# Without the "./", some shells look in PATH for config.status.
projects / gcc.git / blobdiff