READELF_FOR_TARGET
RANLIB_FOR_TARGET
OBJDUMP_FOR_TARGET
+OBJCOPY_FOR_TARGET
NM_FOR_TARGET
LIPO_FOR_TARGET
LD_FOR_TARGET
LD_FOR_TARGET
LIPO_FOR_TARGET
NM_FOR_TARGET
+OBJCOPY_FOR_TARGET
OBJDUMP_FOR_TARGET
RANLIB_FOR_TARGET
READELF_FOR_TARGET
LIPO for the target
NM_FOR_TARGET
NM for the target
+ OBJCOPY_FOR_TARGET
+ OBJCOPY for the target
OBJDUMP_FOR_TARGET
OBJDUMP for the target
RANLIB_FOR_TARGET
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
# for explicit misaligned loads.
noconfigdirs="$noconfigdirs target-libssp"
;;
+ visium-*-*)
+ # No hosted I/O support.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
esac
# Disable libstdc++-v3 for some systems.
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ arm*-*-freebsd*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-mingw*)
host_makefile_frag="config/mh-mingw"
;;
- alpha*-*-linux*)
- host_makefile_frag="config/mh-alpha-linux"
- ;;
hppa*-hp-hpux10*)
host_makefile_frag="config/mh-pa-hpux10"
;;
case $target in
*-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
*-msdosdjgpp* | *-vms* | *-wince* | *-*-pe* | \
- alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux*)
+ alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux* | \
+ nvptx-*-none)
target_elf=no
;;
*)
fi
fi
+ # If we're building an offloading compiler, add the LTO front end.
+ if test x"$enable_as_accelerator_for" != x ; then
+ case ,${enable_languages}, in
+ *,lto,*) ;;
+ *) enable_languages="${enable_languages},lto" ;;
+ esac
+ fi
+
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objcopy in $with_build_time_tools" >&5
+$as_echo_n "checking for objcopy in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/objcopy; then
+ OBJCOPY_FOR_TARGET=`cd $with_build_time_tools && pwd`/objcopy
+ ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_OBJCOPY_FOR_TARGET" >&5
+$as_echo "$ac_cv_path_OBJCOPY_FOR_TARGET" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ OBJCOPY_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objcopy`
+ test $OBJCOPY_FOR_TARGET = objcopy && OBJCOPY_FOR_TARGET=
+ test -n "$OBJCOPY_FOR_TARGET" && ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "objcopy", so it can be a program name with args.
+set dummy objcopy; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $OBJCOPY_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_OBJCOPY_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
+
+
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+elif test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ for ncn_progname in objcopy; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in objcopy; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ for ncn_progname in objcopy; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" ; then
+ set dummy objcopy
+ if test $build = $target ; then
+ OBJCOPY_FOR_TARGET="$2"
+ else
+ OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ OBJCOPY_FOR_TARGET="$ac_cv_prog_OBJCOPY_FOR_TARGET"
+fi
+
+else
+ OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+fi
+
+
+
+
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdump in $with_build_time_tools" >&5
fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objcopy" >&5
+$as_echo_n "checking where to find the target objcopy... " >&6; }
+if test "x${build}" != "x${host}" ; then
+ if expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ else
+ # Canadian cross, just use what we found
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ OBJCOPY_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objcopy'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+ elif expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ OBJCOPY_FOR_TARGET='$(OBJCOPY)'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+ else
+ # We need a cross tool
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objdump" >&5
$as_echo_n "checking where to find the target objdump... " >&6; }
if test "x${build}" != "x${host}" ; then
+# PR jit/64780: Require the user to explicitly specify
+# --enable-host-shared if the jit is enabled, hinting
+# that they might want to do a separate configure/build of
+# the jit, to avoid users from slowing down the rest of the
+# compiler by enabling the jit.
+if test ${host_shared} = "no" ; then
+ case "${enable_languages}" in
+ *jit*)
+ as_fn_error "
+Enabling language \"jit\" requires --enable-host-shared.
+
+--enable-host-shared typically slows the rest of the compiler down by
+a few %, so you must explicitly enable it.
+
+If you want to build both the jit and the regular compiler, it is often
+best to do this via two separate configure/builds, in separate
+directories, to avoid imposing the performance cost of
+--enable-host-shared on the regular compiler." "$LINENO" 5
+ ;;
+ *)
+ ;;
+ esac
+fi
+
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"