ac_subst_vars='LTLIBOBJS
LIBOBJS
compare_exclusions
+POSTSTAGE1_CONFIGURE_FLAGS
stage2_werror_flag
stage1_checking
stage1_cflags
WINDMC_FOR_TARGET
WINDRES_FOR_TARGET
STRIP_FOR_TARGET
+READELF_FOR_TARGET
RANLIB_FOR_TARGET
OBJDUMP_FOR_TARGET
NM_FOR_TARGET
DLLTOOL_FOR_TARGET
AS_FOR_TARGET
AR_FOR_TARGET
+GOC_FOR_TARGET
GFORTRAN_FOR_TARGET
GCJ_FOR_TARGET
GCC_FOR_TARGET
CXX_FOR_TARGET
CC_FOR_TARGET
+READELF
OBJDUMP
OBJCOPY
WINDMC
M4
BISON
YACC
-config_shell
WINDRES_FOR_BUILD
WINDMC_FOR_BUILD
RANLIB_FOR_BUILD
NM_FOR_BUILD
LD_FOR_BUILD
LDFLAGS_FOR_BUILD
+GOC_FOR_BUILD
GFORTRAN_FOR_BUILD
GCJ_FOR_BUILD
DLLTOOL_FOR_BUILD
host_configargs
build_configargs
BUILD_CONFIG
+LDFLAGS_FOR_TARGET
CXXFLAGS_FOR_TARGET
CFLAGS_FOR_TARGET
DEBUG_PREFIX_CFLAGS_FOR_TARGET
LDFLAGS
CFLAGS
CC
+EXTRA_CONFIGARGS_LIBJAVA
target_subdir
host_subdir
build_subdir
enable_option_checking
with_build_libsubdir
enable_gold
+enable_ld
+enable_libquadmath
+enable_libquadmath_support
enable_libada
enable_libssp
+enable_static_libjava
+enable_bootstrap
enable_build_with_cxx
+enable_build_poststage1_with_cxx
with_mpc
with_mpc_include
with_mpc_lib
enable_objc_gc
with_build_sysroot
with_debug_prefix_map
-enable_bootstrap
with_build_config
enable_serial_configure
with_build_time_tools
WINDMC
OBJCOPY
OBJDUMP
+READELF
CC_FOR_TARGET
CXX_FOR_TARGET
GCC_FOR_TARGET
GCJ_FOR_TARGET
GFORTRAN_FOR_TARGET
+GOC_FOR_TARGET
AR_FOR_TARGET
AS_FOR_TARGET
DLLTOOL_FOR_TARGET
NM_FOR_TARGET
OBJDUMP_FOR_TARGET
RANLIB_FOR_TARGET
+READELF_FOR_TARGET
STRIP_FOR_TARGET
WINDRES_FOR_TARGET
WINDMC_FOR_TARGET'
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-gold[=ARG] build gold [ARG={both}[/{gold,ld}]]
+ --enable-gold[=ARG] build gold [ARG={default,yes,no}]
+ --enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --disable-libquadmath do not build libquadmath directory
+ --disable-libquadmath-support
+ disable libquadmath support for Fortran
--enable-libada build libada directory
--enable-libssp build libssp directory
+ --enable-static-libjava[=ARG]
+ build static libjava [default=no]
+ --enable-bootstrap enable bootstrapping [yes if native build]
--enable-build-with-cxx build with C++ compiler instead of C compiler
- --disable-ppl-version-check disable check for PPL version
- --enable-cloog-backend=backend
- isl: The cloog.org isl backend
- ppl-legacy: The legacy ppl backend - default
- ppl: The cloog.org ppl backend
+ --enable-build-poststage1-with-cxx
+ build stages 2 and 3 with C++, not C
+ --disable-ppl-version-check
+ disable check for PPL version
+ --enable-cloog-backend[=BACKEND]
+ set the CLooG BACKEND used to either isl, ppl or
+ ppl-legacy (default)
--disable-cloog-version-check
disable check for CLooG version
--enable-lto enable link time optimization support
- --enable-stage1-languages[=all] choose additional languages to build during
- stage1. Mostly useful for compiler development.
- --enable-objc-gc enable use of Boehm's garbage collector with the
- GNU Objective-C runtime
- --enable-bootstrap enable bootstrapping [yes if native build]
+ --enable-stage1-languages[=all]
+ choose additional languages to build during stage1.
+ Mostly useful for compiler development
+ --enable-objc-gc enable use of Boehm's garbage collector with the GNU
+ Objective-C runtime
--enable-serial-[{host,target,build}-]configure
- force sequential configuration of
- sub-packages for the host, target or build
- machine, or all sub-packages
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
- --enable-stage1-checking[=all] choose additional checking for stage1
- of the compiler
+ force sequential configuration of sub-packages for
+ the host, target or build machine, or all
+ sub-packages
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-stage1-checking[=all]
+ choose additional checking for stage1 of the
+ compiler
--enable-werror enable -Werror in bootstrap stage2 and later
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
- --with-mpc=PATH specify prefix directory for installed MPC package.
- Equivalent to --with-mpc-include=PATH/include
- plus --with-mpc-lib=PATH/lib
- --with-mpc-include=PATH
- specify directory for installed MPC include files
- --with-mpc-lib=PATH specify directory for the installed MPC library
+ --with-mpc=PATH specify prefix directory for installed MPC package.
+ Equivalent to --with-mpc-include=PATH/include plus
+ --with-mpc-lib=PATH/lib
+ --with-mpc-include=PATH specify directory for installed MPC include files
+ --with-mpc-lib=PATH specify directory for the installed MPC library
--with-mpfr-dir=PATH this option has been REMOVED
--with-mpfr=PATH specify prefix directory for installed MPFR package.
- Equivalent to --with-mpfr-include=PATH/include
- plus --with-mpfr-lib=PATH/lib
+ Equivalent to --with-mpfr-include=PATH/include plus
+ --with-mpfr-lib=PATH/lib
--with-mpfr-include=PATH
specify directory for installed MPFR include files
--with-mpfr-lib=PATH specify directory for the installed MPFR library
--with-gmp-dir=PATH this option has been REMOVED
- --with-gmp=PATH specify prefix directory for the installed GMP package.
- Equivalent to --with-gmp-include=PATH/include
- plus --with-gmp-lib=PATH/lib
+ --with-gmp=PATH specify prefix directory for the installed GMP
+ package. Equivalent to
+ --with-gmp-include=PATH/include plus
+ --with-gmp-lib=PATH/lib
--with-gmp-include=PATH specify directory for installed GMP include files
--with-gmp-lib=PATH specify directory for the installed GMP library
- --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
- when linking with PPL
- --with-stage1-ldflags=FLAGS Linker flags for stage1
- -with-stage1-libs=LIBS Libraries for stage1
- --with-boot-libs=LIBS Libraries for stage2 and later
- --with-boot-ldflags=FLAGS Linker flags for stage2 and later
- --with-ppl=PATH Specify prefix directory for the installed PPL package
- Equivalent to --with-ppl-include=PATH/include
- plus --with-ppl-lib=PATH/lib
- --with-ppl-include=PATH Specify directory for installed PPL include files
- --with-ppl-lib=PATH Specify the directory for the installed PPL library
+ --with-host-libstdcxx=L use linker arguments L to link with libstdc++ when
+ linking with PPL
+ --with-stage1-ldflags=FLAGS
+ linker flags for stage1
+ --with-stage1-libs=LIBS libraries for stage1
+ --with-boot-libs=LIBS libraries for stage2 and later
+ --with-boot-ldflags=FLAGS
+ linker flags for stage2 and later
+ --with-ppl=PATH specify prefix directory for the installed PPL
+ package. Equivalent to
+ --with-ppl-include=PATH/include plus
+ --with-ppl-lib=PATH/lib
+ --with-ppl-include=PATH specify directory for installed PPL include files
+ --with-ppl-lib=PATH specify directory for the installed PPL library
--with-cloog=PATH Specify prefix directory for the installed CLooG-PPL
package. Equivalent to
--with-cloog-include=PATH/include plus
--with-build-sysroot=SYSROOT
use sysroot as the system root during the build
--with-debug-prefix-map='A=B C=D ...'
- map A to B, C to D ... in debug information
---with-build-config='NAME NAME2...'
- Use config/NAME.mk build configuration
+ map A to B, C to D ... in debug information
+ --with-build-config='NAME NAME2...'
+ use config/NAME.mk build configuration
--with-build-time-tools=PATH
use given path to find target tools during the build
WINDMC WINDMC for the host
OBJCOPY OBJCOPY for the host
OBJDUMP OBJDUMP for the host
+ READELF READELF for the host
CC_FOR_TARGET
CC for the target
CXX_FOR_TARGET
GCJ for the target
GFORTRAN_FOR_TARGET
GFORTRAN for the target
+ GOC_FOR_TARGET
+ GOC for the target
AR_FOR_TARGET
AR for the target
AS_FOR_TARGET
OBJDUMP for the target
RANLIB_FOR_TARGET
RANLIB for the target
+ READELF_FOR_TARGET
+ READELF for the target
STRIP_FOR_TARGET
STRIP for the target
WINDRES_FOR_TARGET
done
-### we might need to use some other shell than /bin/sh for running subshells
-### If we are on Windows, search for the shell. This will permit people
-### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
-### without also having to set CONFIG_SHELL. This code will work when
-### using bash, which sets OSTYPE.
-case "${OSTYPE}" in
-*win32*)
- if test x${CONFIG_SHELL} = x ; then
- if test ! -f /bin/sh ; then
- if test x${SHELL} != x && test -f ${SHELL} ; then
- CONFIG_SHELL=${SHELL}
- export CONFIG_SHELL
- else
- for prog in sh sh.exe bash bash.exe; do
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$prog; then
- CONFIG_SHELL=$dir/$prog
- export CONFIG_SHELL
- break
- fi
- done
- IFS="$save_ifs"
- test -n "${CONFIG_SHELL}" && break
- done
- fi
- fi
- fi
- ;;
-esac
-
-config_shell=${CONFIG_SHELL-/bin/sh}
-
-moveifchange=${srcdir}/move-if-change
-
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# We pass INSTALL explicitly to sub-makes. Make sure that it is not
build_libs="build-libiberty"
# these tools are built for the build environment
-build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-zlib \
- target-qthreads \
target-libjava"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
-#
+# Note that libiberty is not a target library.
target_libraries="target-libgcc \
- target-libiberty \
target-libgloss \
target-newlib \
target-libgomp \
+ target-libitm \
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
target-boehm-gc \
${libgcj} \
target-libobjc \
- target-libada"
+ target-libada \
+ target-libgo"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
#
# note: any program that *uses* libraries that are in the "target_libraries"
-# list belongs in this list. those programs are also very likely
-# candidates for the "native_only" list which follows
+# list belongs in this list.
#
-target_tools="target-examples target-groff target-gperf target-rda"
+target_tools="target-rda"
################################################################################
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
-# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
-
-# Similarly, some are only suitable for cross toolchains.
+# Some are only suitable for cross toolchains.
# Remove these if host=target.
cross_only="target-libgloss target-newlib target-opcodes"
case $is_cross_compiler in
no) skipdirs="${skipdirs} ${cross_only}" ;;
- yes) skipdirs="${skipdirs} ${native_only}" ;;
esac
# If both --with-headers and --with-libs are specified, default to
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
-# Handle --enable-gold.
-# --enable-gold Build only gold
-# --disable-gold [default] Build only ld
-# --enable-gold=both Build both gold and ld, ld is default
-# --enable-gold=both/ld Same
-# --enable-gold=both/gold Build both gold and ld, gold is default, ld is renamed ld.bfd
-
+# Handle --enable-gold, --enable-ld.
+# --disable-gold [--enable-ld]
+# Build only ld. Default option.
+# --enable-gold [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold", install ld
+# as "ld.bfd" and "ld".
+# --enable-gold=default [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold" and "ld",
+# install ld as "ld.bfd".
+# --enable-gold[=default] --disable-ld
+# Build only gold, which is then installed as both "ld.gold" and "ld".
+# --enable-gold --enable-ld=default
+# Build both gold (installed as "ld.gold") and ld (installed as "ld"
+# and ld.bfd).
+# In other words, ld is default
+# --enable-gold=default --enable-ld=default
+# Error.
+
+default_ld=
# Check whether --enable-gold was given.
if test "${enable_gold+set}" = set; then :
enableval=$enable_gold; ENABLE_GOLD=$enableval
ENABLE_GOLD=no
fi
- case "${ENABLE_GOLD}" in
- yes|both|both/gold|both/ld)
+case "${ENABLE_GOLD}" in
+ yes|default)
# Check for ELF target.
is_elf=no
case "${target}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
- | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
+ | *-*-solaris2* | *-*-nto*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
# Check for target supported by gold.
case "${target}" in
i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
- case "${ENABLE_GOLD}" in
- both*)
- configdirs="$configdirs gold"
- ;;
- *)
- configdirs=`echo " ${configdirs} " | sed -e 's/ ld / gold /'`
- ;;
- esac
+ configdirs="$configdirs gold"
+ if test x${ENABLE_GOLD} = xdefault; then
+ default_ld=gold
+ fi
ENABLE_GOLD=yes
;;
esac
*)
as_fn_error "invalid --enable-gold argument" "$LINENO" 5
;;
- esac
+esac
+
+# Check whether --enable-ld was given.
+if test "${enable_ld+set}" = set; then :
+ enableval=$enable_ld; ENABLE_LD=$enableval
+else
+ ENABLE_LD=yes
+fi
+
+
+case "${ENABLE_LD}" in
+ default)
+ if test x${default_ld} != x; then
+ as_fn_error "either gold or ld can be the default ld" "$LINENO" 5
+ fi
+ ;;
+ yes)
+ ;;
+ no)
+ if test x${ENABLE_GOLD} != xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: neither ld nor gold are enabled" >&5
+$as_echo "$as_me: WARNING: neither ld nor gold are enabled" >&2;}
+ fi
+ configdirs=`echo " ${configdirs} " | sed -e 's/ ld / /'`
+ ;;
+ *)
+ as_fn_error "invalid --enable-ld argument" "$LINENO" 5
+ ;;
+esac
# Configure extra directories which are host specific
# exist yet.
case "${host}" in
- hppa*64*-*-*)
- noconfigdirs="$noconfigdirs byacc"
- ;;
- i[3456789]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
- ;;
- i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
- ;;
- x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
- ;;
- i[3456789]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
- ;;
- i[3456789]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb"
- ;;
- *-*-cygwin*)
- noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
- ;;
- *-*-netbsd*)
- noconfigdirs="$noconfigdirs rcs"
- ;;
- ppc*-*-pe)
- noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
- ;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
+ i[3456789]86-*-msdosdjgpp*)
+ noconfigdirs="$noconfigdirs tcl tk itcl"
;;
esac
+# Check whether --enable-libquadmath was given.
+if test "${enable_libquadmath+set}" = set; then :
+ enableval=$enable_libquadmath; ENABLE_LIBQUADMATH=$enableval
+else
+ ENABLE_LIBQUADMATH=yes
+fi
+
+if test "${ENABLE_LIBQUADMATH}" = "no" ; then
+ noconfigdirs="$noconfigdirs target-libquadmath"
+fi
+
+
+# Check whether --enable-libquadmath-support was given.
+if test "${enable_libquadmath_support+set}" = set; then :
+ enableval=$enable_libquadmath_support; ENABLE_LIBQUADMATH_SUPPORT=$enableval
+else
+ ENABLE_LIBQUADMATH_SUPPORT=yes
+fi
+
+enable_libquadmath_support=
+if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then
+ enable_libquadmath_support=no
+fi
+
+
# Check whether --enable-libada was given.
if test "${enable_libada+set}" = set; then :
enableval=$enable_libada; ENABLE_LIBADA=$enableval
;;
no)
# Make sure we get it printed in the list of not supported target libs.
- noconfigdirs="$noconfigdirs ${libgcj}"
+ # Don't disable libffi, though, other languages use it.
+ noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
+ # Clear libgcj_saved so that even if java is enabled libffi won't be
+ # built.
+ libgcj_saved=
;;
esac
+# Check whether --enable-static-libjava was given.
+if test "${enable_static_libjava+set}" = set; then :
+ enableval=$enable_static_libjava; ENABLE_STATIC_LIBJAVA=$enableval
+else
+ ENABLE_STATIC_LIBJAVA=no
+fi
+
+enable_static_libjava=
+if test "${ENABLE_STATIC_LIBJAVA}" = "yes" ; then
+ enable_static_libjava=yes
+fi
+
+if test x$enable_static_libjava != xyes ; then
+ EXTRA_CONFIGARGS_LIBJAVA=--disable-static
+fi
+
# Disable libmudflap on some systems.
if test x$enable_libmudflap = x ; then
case "${target}" in
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
;;
- *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+ *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
;;
- *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+ *-*-solaris2* | *-*-hpux11*)
;;
*-*-darwin* | *-*-aix*)
;;
esac
fi
+# Disable libitm on unsupported systems.
+if test -d ${srcdir}/libitm; then
+ if test x$enable_libitm = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libitm support" >&5
+$as_echo_n "checking for libitm support... " >&6; }
+ if (srcdir=${srcdir}/libitm; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ noconfigdirs="$noconfigdirs target-libitm"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ fi
+fi
+
+# Disable libssp for some systems.
+case "${target}" in
+ avr-*-*)
+ # No hosted I/O support.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+ powerpc-*-aix* | rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+ rl78-*-*)
+ # libssp uses a misaligned load to trigger a fault, but the RL78
+ # doesn't fault for those - instead, it gives a build-time error
+ # for explicit misaligned loads.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+esac
+
+# Disable libstdc++-v3 for some systems.
+case "${target}" in
+ *-*-vxworks*)
+ # VxWorks uses the Dinkumware C++ library.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ arm*-wince-pe*)
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+esac
+
+# Disable Fortran for some systems.
+case "${target}" in
+ mmix-*-*)
+ # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
+ unsupported_languages="$unsupported_languages fortran"
+ ;;
+esac
+
+# Disable Java if libffi is not supported.
+case "${target}" in
+ alpha*-*-*)
+ ;;
+ arm*-*-*)
+ ;;
+ cris-*-*)
+ ;;
+ frv-*-*)
+ ;;
+ hppa*-*-linux*)
+ ;;
+ hppa*-*-hpux*)
+ ;;
+ i?86-*-*)
+ ;;
+ ia64*-*-*)
+ ;;
+ m32r*-*-*)
+ ;;
+ m68k-*-*)
+ ;;
+ mips*-*-rtems*)
+ ;;
+ mips*-*-linux*)
+ ;;
+ powerpc*-*-linux*)
+ ;;
+ powerpc-*-darwin*)
+ ;;
+ powerpc-*-aix* | rs6000-*-aix*)
+ ;;
+ powerpc-*-freebsd*)
+ ;;
+ powerpc64-*-freebsd*)
+ ;;
+ powerpc*-*-rtems*)
+ ;;
+ s390-*-* | s390x-*-*)
+ ;;
+ sh-*-* | sh[34]*-*-*)
+ ;;
+ sh64-*-* | sh5*-*-*)
+ ;;
+ sparc*-*-*)
+ ;;
+ x86_64-*-*)
+ ;;
+ *-*-*)
+ unsupported_languages="$unsupported_languages java"
+ ;;
+esac
+
+# Disable Java, libgcj or related libraries for some systems.
+case "${target}" in
+ powerpc-*-darwin*)
+ ;;
+ i[3456789]86-*-darwin*)
+ ;;
+ x86_64-*-darwin[912]*)
+ ;;
+ *-*-darwin*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-rtems*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-uclinux*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ alpha*-*-*vms*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ arm-wince-pe)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ arm*-*-symbianelf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ bfin-*-*)
+ noconfigdirs="$noconfigdirs target-boehm-gc"
+ ;;
+ cris-*-* | crisv32-*-*)
+ unsupported_languages="$unsupported_languages java"
+ case "${target}" in
+ *-*-linux*)
+ ;;
+ *) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
+ esac
+ ;;
+ hppa*64*-*-linux*)
+ # In this case, it's because the hppa64-linux target is for
+ # the kernel only at this point and has no libc, and thus no
+ # headers, crt*.o, etc., all of which are needed by these.
+ unsupported_languages="$unsupported_languages java"
+ ;;
+ hppa*64*-*-hpux*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ hppa*-hp-hpux11*)
+ ;;
+ hppa*-*-hpux*)
+ # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+ # build on HP-UX 10.20.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ ia64*-*-*vms*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ i[3456789]86-w64-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ i[3456789]86-*-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ x86_64-*-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ mmix-*-*)
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc"
+ ;;
+ powerpc-*-aix*)
+ # copied from rs6000-*-* entry
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-lynxos*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+esac
+
# Default libgloss CPU subdirectory.
libgloss_dir="$target_cpu"
+case "${target}" in
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ libgloss_dir=wince
+ ;;
+ arm*-*-*)
+ libgloss_dir=arm
+ ;;
+ cris-*-* | crisv32-*-*)
+ libgloss_dir=cris
+ ;;
+ hppa*-*-*)
+ libgloss_dir=pa
+ ;;
+ i[3456789]86-*-*)
+ libgloss_dir=i386
+ ;;
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ libgloss_dir=m68hc11
+ ;;
+ m68*-*-* | fido-*-*)
+ libgloss_dir=m68k
+ ;;
+ mips*-*-*)
+ libgloss_dir=mips
+ ;;
+ powerpc*-*-*)
+ libgloss_dir=rs6000
+ ;;
+ sparc*-*-*)
+ libgloss_dir=sparc
+ ;;
+esac
+
+# Disable newlib and libgloss for various target OSes.
+case "${target}" in
+ alpha*-dec-osf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ i[3456789]86-*-linux*)
+ # This section makes it possible to build newlib natively on linux.
+ # If we are using a cross compiler then don't configure newlib.
+ if test x${is_cross_compiler} != xno ; then
+ noconfigdirs="$noconfigdirs target-newlib"
+ fi
+ noconfigdirs="$noconfigdirs target-libgloss"
+ # If we are not using a cross compiler, do configure newlib.
+ # Note however, that newlib will only be configured in this situation
+ # if the --with-newlib option has been given, because otherwise
+ # 'target-newlib' will appear in skipdirs.
+ ;;
+ i[3456789]86-*-rdos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ sh*-*-pe|mips*-*-pe|arm-wince-pe)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ sparc-*-sunos4*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-aix*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-beos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-chorusos)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-dragonfly*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-lynxos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-mingw*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-netbsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-uclinux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+esac
+
case "${target}" in
*-*-chorusos)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
*-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
- noconfigdirs="$noconfigdirs ${libgcj}"
;;
- *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ *-*-dragonfly*)
;;
*-*-freebsd*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
&& test -f /usr/local/include/gmp.h; then
with_gmp=/usr/local
fi
-
- # Skip some stuff that's unsupported on some FreeBSD configurations.
- case "${target}" in
- i*86-*-*) ;;
- alpha*-*-*) ;;
- x86_64-*-*) ;;
- *)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
- skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
- skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
- skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
noconfigdirs="$noconfigdirs target-libgloss"
;;
*-*-netbsd*)
- # Skip some stuff on all NetBSD configurations.
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
-
- # Skip some stuff that's unsupported on some NetBSD configurations.
- case "${target}" in
- i*86-*-netbsdelf*) ;;
- arm*-*-netbsdelf*) ;;
- *)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
;;
*-*-netware*)
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
- skipdirs="${skipdirs} target-libiberty"
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
+ noconfigdirs="$noconfigdirs target-rda"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
- # newlib is not 64 bit ready. I'm not sure about fileutils.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
- ;;
- alpha*-*-linux*)
- # newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
alpha*-*-*)
# newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
- sh-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
- noconfigdirs="$noconfigdirs ${libgcj}"
- noconfigdirs="$noconfigdirs target-examples"
- noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
- noconfigdirs="$noconfigdirs expect dejagnu"
- # the C++ libraries don't build on top of CE's C libraries
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- noconfigdirs="$noconfigdirs target-newlib"
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb and readline
- *) noconfigdirs="$noconfigdirs gdb readline"
- ;;
- esac
- libgloss_dir=wince
;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- arm-semi-aof )
- ;;
- arm-*-coff | strongarm-*-coff | xscale-*-coff)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=arm
- ;;
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- libgloss_dir=arm
- ;;
- arm*-*-linux-gnueabi)
- noconfigdirs="$noconfigdirs target-qthreads"
- case ${with_newlib} in
- no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- esac
- libgloss_dir=arm
- ;;
- arm*-*-symbianelf*)
- noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
- libgloss_dir=arm
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-pe*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-pe)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-riscix*)
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
- ;;
- avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
- ;;
- bfin-*-*)
- unsupported_languages="$unsupported_languages java"
- noconfigdirs="$noconfigdirs target-boehm-gc gdb"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
+ noconfigdirs="$noconfigdirs ld target-libgloss"
;;
c4x-*-* | tic4x-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
- ;;
- c54x*-*-* | tic54x-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
- ;;
- cr16-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
- ;;
- cris-*-* | crisv32-*-*)
- unsupported_languages="$unsupported_languages java"
- case "${target}" in
- *-*-aout)
- unsupported_languages="$unsupported_languages fortran"
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-elf)
- noconfigdirs="$noconfigdirs target-boehm-gc";;
- *-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
- *)
- unsupported_languages="$unsupported_languages fortran"
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
- esac
- libgloss_dir=cris
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- crx-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
+ tic54x-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss gdb"
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
d30v-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
- ;;
- ep9312-*-elf | ep9312-*-coff)
- libgloss_dir=arm
+ noconfigdirs="$noconfigdirs gdb"
;;
fr30-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
- ;;
- frv-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb"
;;
moxie-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs gprof"
;;
h8300*-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
- hppa*64*-*-linux* | parisc*64*-*-linux*)
- # In this case, it's because the hppa64-linux target is for
- # the kernel only at this point and has no libc, and thus no
- # headers, crt*.o, etc., all of which are needed by these.
- noconfigdirs="$noconfigdirs target-zlib"
+ hppa*64*-*-linux*)
;;
- parisc*-*-linux* | hppa*-*-linux*)
+ hppa*-*-linux*)
;;
hppa*-*-*elf* | \
hppa*-*-lites* | \
hppa*-*-openbsd* | \
hppa*64*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
;;
hppa*-hp-hpux11*)
- noconfigdirs="$noconfigdirs ld shellutils"
+ noconfigdirs="$noconfigdirs ld"
;;
hppa*-*-pro*)
- libgloss_dir=pa
;;
hppa*-*-*)
- # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
- # build on HP-UX 10.20.
- noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+ noconfigdirs="$noconfigdirs ld"
;;
i960-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ noconfigdirs="$noconfigdirs gdb"
;;
ia64*-*-elf*)
# No gdb support yet.
- noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
+ noconfigdirs="$noconfigdirs readline libgui itcl gdb"
;;
ia64*-**-hpux*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs libgui itcl ld"
;;
ia64*-*-*vms*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
- ;;
- i370-*-opened*)
- ;;
- i[3456789]86-*-coff | i[3456789]86-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=i386
- ;;
- i[3456789]86-*-linux*)
- # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
- # not build java stuff by default.
- case "${target}" in
- *-*-*libc1*)
- noconfigdirs="$noconfigdirs ${libgcj}";;
- esac
-
- # This section makes it possible to build newlib natively on linux.
- # If we are using a cross compiler then don't configure newlib.
- if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs target-newlib"
- fi
- noconfigdirs="$noconfigdirs target-libgloss"
- # If we are not using a cross compiler, do configure newlib.
- # Note however, that newlib will only be configured in this situation
- # if the --with-newlib option has been given, because otherwise
- # 'target-newlib' will appear in skipdirs.
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs libgui itcl ld"
;;
i[3456789]86-w64-mingw*)
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
;;
i[3456789]86-*-mingw*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
- ;;
- x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss"
# always build newlib if winsup directory is present.
if test -d "$srcdir/winsup/cygwin"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
;;
- i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
- i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
- ;;
i[3456789]86-*-pe)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456789]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ld target-libgloss"
;;
i[3456789]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
- i[3456789]86-*-solaris2*)
+ i[3456789]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456789]86-*-sysv4*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456789]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb"
;;
i[3456789]86-*-rdos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
- ;;
- m32r-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
- libgloss_dir=m68hc11
- ;;
- m68k-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- m68k-*-coff*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- m68*-*-* | fido-*-*)
- libgloss_dir=m68k
- ;;
- mcore-*-pe*)
- # The EPOC C++ environment does not support exceptions or rtti,
- # and so building libstdc++-v3 tends not to always work.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ noconfigdirs="$noconfigdirs gdb"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
- unsupported_languages="$unsupported_languages fortran java"
- ;;
- mn10200-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- mn10300-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb"
;;
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
- powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+ powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
- libgloss_dir=rs6000
+ noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
;;
powerpc-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
- ;;
- powerpc-*-eabi)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=rs6000
- ;;
- powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
- libgloss_dir=rs6000
+ noconfigdirs="$noconfigdirs gdb"
;;
rs6000-*-lynxos*)
- noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
rs6000-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
m68k-apollo-*)
- noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
;;
microblaze*)
- noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
mips*-sde-elf*)
- skipdirs="$skipdirs target-libiberty"
- noconfigdirs="$noconfigdirs ${libgcj}"
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
fi
- libgloss_dir=mips
;;
mips*-*-irix5*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-irix6*)
- # Linking libjava exceeds command-line length limits on at least
- # IRIX 6.2, but not on IRIX 6.5.
- # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
- # <oldham@codesourcery.com>
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
mips*-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
- libgloss_dir=mips
- ;;
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
sh-*-* | sh64-*-*)
- case "${host}" in
- i[3456789]86-*-vsta) ;; # don't add gprof back in
- i[3456789]86-*-go32*) ;; # don't add gprof back in
- i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
- *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
- esac
case "${target}" in
sh*-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}" ;;
+ ;;
*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;;
+ noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
;;
- sparclet-*-aout* | sparc86x-*-*)
- libgloss_dir=sparc
- ;;
- sparc-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- sparc64-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=sparc
- ;;
- sparclite-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=sparc
- ;;
sparc-*-sunos4*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
- else
+ if test x${is_cross_compiler} = xno ; then
use_gnu_ld=no
fi
;;
- sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
- ;;
- tic6x-*-*)
- noconfigdirs="$noconfigdirs gdb sim ${libgcj}"
- ;;
- v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
- ;;
- v850*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
- ;;
- vax-*-*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ tic6x-*-*)
+ noconfigdirs="$noconfigdirs sim"
;;
- xtensa*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ tilepro-*-* | tilegx-*-*)
+ noconfigdirs="$noconfigdirs sim"
;;
- ip2k-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ v810-*-*)
+ noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
;;
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+ vax-*-*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- *-*-lynxos*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- *-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
esac
# If we aren't building newlib, then don't build libgloss, since libgloss
esac
# Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
- # If it's HP/UX ar, this should be harmless.
- RANLIB="ar ts"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- # Used to have BISON=yacc.
- tentative_cc=gcc
- ;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- ;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
- ;;
- m88k-motorola-sysv*)
- ;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
- ;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
- ;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
- ;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
-
- # This is needed for GDB, but needs to be in the top-level make because
- # if a library is compiled with the bsd headers and gets linked with the
- # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
- # a different size).
- # ptrace(2) apparently has problems in the BSD environment. No workaround is
- # known except to select the sysv environment. Could we use /proc instead?
- # These "sysv environments" and "bsd environments" often end up being a pain.
- #
- # This is not part of CFLAGS because perhaps not all C compilers have this
- # option.
- tentative_cc="cc -systype sysv"
- ;;
- i370-ibm-opened*)
- tentative_cc="c89"
- ;;
- i[3456789]86-*-sysv5*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[3456789]86-*-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux386"
- ;;
- i[3456789]86-ncr-sysv4.3*)
- # The MetaWare compiler will generate a copyright message unless you
- # turn it off by adding the -Hnocopyr flag.
- tentative_cc="cc -Hnocopyr"
- ;;
- i[3456789]86-ncr-sysv4*)
- # for an NCR 3000 (i486/SVR4) system.
- # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
- # This compiler not only emits obnoxious copyright messages every time
- # you run it, but it chokes and dies on a whole bunch of GNU source
- # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
- tentative_cc="/usr/ccs/ATT/cc"
- host_makefile_frag="config/mh-ncr3000"
- ;;
- i[3456789]86-*-sco3.2v5*)
- ;;
- i[3456789]86-*-sco*)
- # The native C compiler botches some simple uses of const. Unfortunately,
- # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
- tentative_cc="cc -Dconst="
- host_makefile_frag="config/mh-sco"
- ;;
- i[3456789]86-*-udk*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[3456789]86-*-solaris2*)
- host_makefile_frag="config/mh-sysv4"
- ;;
i[3456789]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-mingw*)
host_makefile_frag="config/mh-mingw"
;;
- *-interix*)
- host_makefile_frag="config/mh-interix"
- ;;
- vax-*-ultrix2*)
- # The old BSD pcc isn't up to compiling parts of gdb so use gcc
- tentative_cc=gcc
- ;;
- *-*-solaris2*)
- host_makefile_frag="config/mh-solaris"
- ;;
- m68k-sun-sunos*)
- # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
- # without overflowing the jump tables (-J says to use a 32 bit table)
- tentative_cc="cc -J"
- ;;
hppa*-hp-hpux10*)
- tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa-hpux10"
;;
- hppa*-hp-hpux* | hppa*-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
+ hppa*-hp-hpux*)
host_makefile_frag="config/mh-pa"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
- *-hp-hpux* | *-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
- ;;
- rs6000-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/usr/cygnus/progressive/bin/gcc"
- host_makefile_frag="config/mh-lynxrs6k"
- ;;
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
;;
rs6000-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
;;
- *-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/bin/gcc"
- ;;
- *-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- # This is placed last to prevent interfering with the cases above.
- i[3456789]86-*-*)
- # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
- host_makefile_frag="config/mh-x86omitfp"
- ;;
esac
fi
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- found=
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- found=yes
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${found}" && test -n "${tentative_cc}" ; then
- CC=$tentative_cc
- fi
-fi
-
if test "${build}" != "${host}" ; then
AR_FOR_BUILD=${AR_FOR_BUILD-ar}
AS_FOR_BUILD=${AS_FOR_BUILD-as}
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
+ GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
LD_FOR_BUILD=${LD_FOR_BUILD-ld}
NM_FOR_BUILD=${NM_FOR_BUILD-nm}
CXX_FOR_BUILD="\$(CXX)"
GCJ_FOR_BUILD="\$(GCJ)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
+ GOC_FOR_BUILD="\$(GOC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
LD_FOR_BUILD="\$(LD)"
NM_FOR_BUILD="\$(NM)"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_cv_cc_gcc_supports_ada" >&5
$as_echo "$acx_cv_cc_gcc_supports_ada" >&6; }
-if test x$GNATBIND != xno && test x$GNATMAKE != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+if test "x$GNATBIND" != xno && test "x$GNATMAKE" != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
have_gnat=yes
else
have_gnat=no
+# Check whether --enable-bootstrap was given.
+if test "${enable_bootstrap+set}" = set; then :
+ enableval=$enable_bootstrap;
+else
+ enable_bootstrap=default
+fi
+
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+if test -r $srcdir/gcc/configure; then
+ have_compiler=yes
+else
+ have_compiler=no
+fi
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+ *:*:*:no) ;;
+
+ # Default behavior. Enable bootstrap if we have a compiler
+ # and we are in a native configuration.
+ yes:$build:$build:default)
+ enable_bootstrap=yes ;;
+
+ *:*:*:default)
+ enable_bootstrap=no ;;
+
+ # We have a compiler and we are in a native configuration, bootstrap is ok
+ yes:$build:$build:yes)
+ ;;
+
+ # Other configurations, but we have a compiler. Assume the user knows
+ # what he's doing.
+ yes:*:*:yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: trying to bootstrap a cross compiler" >&5
+$as_echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
+ ;;
+
+ # No compiler: if they passed --enable-bootstrap explicitly, fail
+ no:*:*:yes)
+ as_fn_error "cannot bootstrap without a compiler" "$LINENO" 5 ;;
+
+ # Fail if wrong command line
+ *)
+ as_fn_error "invalid option for --enable-bootstrap" "$LINENO" 5
+ ;;
+esac
+
# See if we are building gcc with C++.
# Check whether --enable-build-with-cxx was given.
if test "${enable_build_with_cxx+set}" = set; then :
fi
+# Build stage1 with C and build stages 2 and 3 with C++.
+# Check whether --enable-build-poststage1-with-cxx was given.
+if test "${enable_build_poststage1_with_cxx+set}" = set; then :
+ enableval=$enable_build_poststage1_with_cxx; ENABLE_BUILD_POSTSTAGE1_WITH_CXX=$enableval
+else
+ ENABLE_BUILD_POSTSTAGE1_WITH_CXX=yes
+fi
+
+
# Used for setting $lt_cv_objdir
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
fi
else
poststage1_ldflags=
- # With --enable-build-with-cxx, default to linking libstdc++ and
- # libgcc statically. But if the user explicitly specified the
- # libraries to use, trust that they are doing what they want.
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then
+ # In stages 2 and 3, default to linking libstdc++ and libgcc
+ # statically. But if the user explicitly specified the libraries to
+ # use, trust that they are doing what they want.
+ if test "$poststage1_libs" = ""; then
poststage1_ldflags="-static-libstdc++ -static-libgcc"
fi
fi
# Check for PPL
-ppllibs=" -lppl_c -lppl -lgmpxx"
+ppllibs=
pplinc=
+pwllib=
# Check whether --with-ppl was given.
fi
+# Check whether --enable-ppl-version-check was given.
+if test "${enable_ppl_version_check+set}" = set; then :
+ enableval=$enable_ppl_version_check;
+fi
+
+
case $with_ppl in
- no)
- ppllibs=
- ;;
- "" | yes)
+ yes | no | "")
;;
*)
- ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl/lib"
pplinc="-I$with_ppl/include $pplinc"
+ if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
+ with_ppl=yes
+ else
+ as_fn_error "cannot find directories \"$with_ppl/lib\" or \"$with_ppl/include\"" "$LINENO" 5
+ fi
;;
esac
-if test "x$with_ppl_include" != x; then
+
+if test x"$with_ppl_include" != x; then
pplinc="-I$with_ppl_include $pplinc"
+ with_ppl=yes
fi
+
if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl_lib"
+ with_ppl=yes
fi
-if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx '
+
+if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ if test x"$enable_watchdog" = xyes; then
+ pwllib="-lpwl"
+ fi
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
enable_ppl_version_check=no
+ with_ppl=yes
fi
-# Check whether --enable-ppl-version-check was given.
-if test "${enable_ppl_version_check+set}" = set; then :
- enableval=$enable_ppl_version_check; ENABLE_PPL_CHECK=$enableval
+if test "x$with_ppl" != xno; then
+ if test "x$pwllib" = x; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $ppllibs -lstdc++ -lm"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PWL_handle_timeout in -lpwl" >&5
+$as_echo_n "checking for PWL_handle_timeout in -lpwl... " >&6; }
+if test "${ac_cv_lib_pwl_PWL_handle_timeout+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpwl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char PWL_handle_timeout ();
+int
+main ()
+{
+return PWL_handle_timeout ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_pwl_PWL_handle_timeout=yes
else
- ENABLE_PPL_CHECK=yes
+ ac_cv_lib_pwl_PWL_handle_timeout=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pwl_PWL_handle_timeout" >&5
+$as_echo "$ac_cv_lib_pwl_PWL_handle_timeout" >&6; }
+if test "x$ac_cv_lib_pwl_PWL_handle_timeout" = x""yes; then :
+ pwllib="-lpwl"
fi
+ LIBS="$saved_LIBS"
+ fi
-if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.10 (or later revision) of PPL" >&5
-$as_echo_n "checking for version 0.10 (or later revision) of PPL... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
+
+ if test "$enable_ppl_version_check" != no; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.11 (revision 0 or later) of PPL" >&5
+$as_echo_n "checking for version 0.11 (revision 0 or later) of PPL... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include "ppl_c.h"
int
main ()
{
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
- choke me
- #endif
+ #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
+ choke me
+ #endif
;
return 0;
$as_echo "no" >&6; }; ppllibs= ; pplinc= ; with_ppl=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$saved_CFLAGS"
+ CFLAGS="$saved_CFLAGS"
+ fi
fi
# Flags needed for PPL
if test "x$with_ppl" = "xno"; then
+
+
+
+ if test "x${with_cloog}" = xno; then
+ graphite_requested=no
+ elif test "x${with_cloog}" != x \
+ || test "x${with_cloog_include}" != x \
+ || test "x${with_cloog_lib}" != x ; then
+ graphite_requested=yes
+ else
+ graphite_requested=no
+ fi
+
+
+ if test "${graphite_requested}" = yes; then
+ as_fn_error "Unable to find a usable PPL. See config.log for details." "$LINENO" 5
+ fi
with_cloog=no
fi
if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
;;
"ISL")
clooginc="${clooginc} ${_cloogorginc}"
- clooglibs="${clooglibs} -lcloog-isl"
+ clooglibs="${clooglibs} -lcloog-isl -lisl"
cloog_org=yes
;;
"PPL")
LDFLAGS="${_cloog_saved_LDFLAGS} ${clooglibs} ${ppllibs}"
if test "${cloog_org}" = yes ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.14.0 of CLooG" >&5
-$as_echo_n "checking for version 0.14.0 of CLooG... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.16.1 of CLooG" >&5
+$as_echo_n "checking for version 0.16.1 of CLooG... " >&6; }
if test "${gcc_cv_cloog_ct_0_14_0+set}" = set; then :
$as_echo_n "(cached) " >&6
else
main ()
{
#if CLOOG_VERSION_MAJOR != 0 \
- || CLOOG_VERSION_MINOR != 14 \
- || CLOOG_VERSION_REVISION < 0
+ || CLOOG_VERSION_MINOR != 16 \
+ || CLOOG_VERSION_REVISION < 1
choke me
#endif
;
- if test "x${with_cloog}" != x \
+ if test "x${with_cloog}" = xno; then
+ graphite_requested=no
+ elif test "x${with_cloog}" != x \
|| test "x${with_cloog_include}" != x \
|| test "x${with_cloog_lib}" != x ; then
graphite_requested=yes
&& test "x${clooglibs}" = x \
&& test "x${clooginc}" = x ; then
- as_fn_error "Unable to find a usable CLooG. See config.log for details." "$LINENO" 5
+ as_fn_error "Unable to find a usable CLooG. See config.log for details." "$LINENO" 5
fi
target_elf=no
case $target in
*-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
- *-msdosdjgpp* | *-netware* | *-vms* | *-wince* | *-*-pe* | \
+ *-msdosdjgpp* | *-vms* | *-wince* | *-*-pe* | \
alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux*)
target_elf=no
;;
else
if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9* | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
;;
esac
+ # If bootstrapping, then using --enable-build-with-cxx or
+ # --enable-build-poststage1-with-cxx requires enabling C++.
+ case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
+ *,c++,*:*:*) ;;
+ *:*,yes,*:yes)
+ if test -f ${srcdir}/gcc/cp/config-lang.in; then
+ enable_languages="${enable_languages},c++"
+ else
+ as_fn_error "bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources" "$LINENO" 5
+ fi
+ ;;
+ esac
+
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
+ enabled_target_libs=
+ disabled_target_libs=
+
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
exit 1
fi
- if test "$language" = "c++" \
- && test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
- boot_language=yes
+ if test "$language" = "c++"; then
+ if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
+ || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
+ boot_language=yes
+ fi
fi
case ,${enable_languages}, in
case $add_this_lang in
unsupported)
# Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
;;
no)
# Remove language-dependent dirs; still show language as supported.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
potential_languages="${potential_languages}${language},"
;;
yes)
new_enable_languages="${new_enable_languages}${language},"
potential_languages="${potential_languages}${language},"
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ enabled_target_libs="$enabled_target_libs $target_libs"
case "${boot_language}:,$enable_stage1_languages," in
yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
# Add to (comma-separated) list of stage 1 languages.
esac
done
+ # Add target libraries which are only needed for disabled languages
+ # to noconfigdirs.
+ if test -n "$disabled_target_libs"; then
+ for dir in $disabled_target_libs; do
+ case " $enabled_target_libs " in
+ *" ${dir} "*) ;;
+ *) noconfigdirs="$noconfigdirs $dir" ;;
+ esac
+ done
+ fi
+
# Check whether --enable-stage1-languages was given.
if test "${enable_stage1_languages+set}" = set; then :
enableval=$enable_stage1_languages; case ,${enable_stage1_languages}, in
;;
esac
+# Disable libitm if we're not building C++
+case ,${enable_languages}, in
+ *,c++,*) ;;
+ *)
+ noconfigdirs="$noconfigdirs target-libitm"
+ ;;
+esac
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
fi
done
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries. In that case, we don't want to build target-libiberty.
-# Don't let libgcc imply libiberty either.
-if test -n "${target_configdirs}" ; then
- libgcc=
- others=
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if test "$i" = "libgcc"; then
- libgcc=target-libgcc
- elif test "$i" != "libiberty" ; then
- if test -r $srcdir/$i/configure ; then
- others=yes;
- break;
- fi
- fi
- done
- if test -z "${others}" ; then
- target_configdirs=$libgcc
- fi
-fi
-
# Quietly strip out all directories which aren't configurable in this tree.
# This relies on all configurable subdirectories being autoconfiscated, which
# is now the case.
fi
+
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
# the *-*-osname triplets last.
md_exec_prefix=
case "${target}" in
- alpha*-*-*vms*)
- md_exec_prefix=/gnu/lib/gcc-lib
- ;;
i[34567]86-pc-msdosdjgpp*)
md_exec_prefix=/dev/env/DJDIR/bin
;;
- i[34567]86-*-sco3.2v5*)
- if test $with_gnu_as = yes; then
- md_exec_prefix=/usr/gnu/bin
- else
- md_exec_prefix=/usr/ccs/bin/elf
- fi
- ;;
-
- mn10300-*-* | \
- powerpc-*-chorusos* | \
- powerpc*-*-eabi* | \
- powerpc*-*-sysv* | \
- powerpc*-*-kaos* | \
- s390x-ibm-tpf*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- sparc64-*-elf*)
- ;;
- v850*-*-*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- xtensa*-*-elf*)
- ;;
-
- *-*-beos* | \
- *-*-elf* | \
*-*-hpux* | \
- *-*-netware* | \
*-*-nto-qnx* | \
- *-*-rtems* | \
- *-*-solaris2* | \
- *-*-sysv[45]* | \
- *-*-vxworks* | \
- *-wrs-windiss)
+ *-*-solaris2*)
md_exec_prefix=/usr/ccs/bin
;;
esac
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- mep*-*-*)
- target_makefile_frag="config/mt-mep"
- ;;
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
- *-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
;;
- *-*-darwin[3-9]*)
- # ranlib before Darwin10 requires the -c flag to look at common symbols.
- extra_ranlibflags_for_target=" -c"
- ;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="config/mt-wince"
- ;;
esac
alphaieee_frag=/dev/null
;;
esac
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
- case "${target}" in
- mips*-*-irix[56]*)
- ;;
- mips*-*-* | alpha*-*-osf*)
- with_stabs=yes;
- extra_host_args="${extra_host_args} --with-stabs"
- ;;
- esac
-fi
-
-# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
-# them automatically.
-case "${host}" in
- hppa*64*-*-hpux11*)
- extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
- ;;
-esac
-
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='${exec_prefix}'/${target_noncanonical}
esac
rm -f conftest*
-# The Solaris /usr/ucb/cc compiler does not appear to work.
-case "${host}" in
- sparc-sun-solaris2*)
- CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
- could_use=
- test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
- if test -d /opt/cygnus/bin ; then
- if test "$could_use" = "" ; then
- could_use="/opt/cygnus/bin"
- else
- could_use="$could_use or /opt/cygnus/bin"
- fi
- fi
- if test "$could_use" = "" ; then
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc. You should change your PATH or CC "
- echo "variable and rerun configure."
- else
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc, when you should use the C compiler from"
- echo "$could_use. You should change your"
- echo "PATH or CC variable and rerun configure."
- fi
- fi
- ;;
-esac
-
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
# Loop over modules. We used to use the "$extrasub" feature from Autoconf
# but now we're fixing up the Makefile ourselves with the additional
# commands passed to AC_CONFIG_FILES. Use separate variables
-# extrasub-{build,host,target} not because there is any reason to split
-# the substitutions up that way, but only to remain below the limit of
-# 99 commands in a script, for HP-UX sed.
-# Do not nest @if/@endif pairs, because configure will not warn you at all.
-
-# Check whether --enable-bootstrap was given.
-if test "${enable_bootstrap+set}" = set; then :
- enableval=$enable_bootstrap;
-else
- enable_bootstrap=default
-fi
-
-
-# Issue errors and warnings for invalid/strange bootstrap combinations.
-case "$configdirs" in
- *gcc*) have_compiler=yes ;;
- *) have_compiler=no ;;
-esac
-
-case "$have_compiler:$host:$target:$enable_bootstrap" in
- *:*:*:no) ;;
-
- # Default behavior. Enable bootstrap if we have a compiler
- # and we are in a native configuration.
- yes:$build:$build:default)
- enable_bootstrap=yes ;;
-
- *:*:*:default)
- enable_bootstrap=no ;;
-
- # We have a compiler and we are in a native configuration, bootstrap is ok
- yes:$build:$build:yes)
- ;;
-
- # Other configurations, but we have a compiler. Assume the user knows
- # what he's doing.
- yes:*:*:yes)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: trying to bootstrap a cross compiler" >&5
-$as_echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
- ;;
-
- # No compiler: if they passed --enable-bootstrap explicitly, fail
- no:*:*:yes)
- as_fn_error "cannot bootstrap without a compiler" "$LINENO" 5 ;;
-
- # Fail if wrong command line
- *)
- as_fn_error "invalid option for --enable-bootstrap" "$LINENO" 5
- ;;
-esac
-
-case ",$enable_languages,:$ENABLE_BUILD_WITH_CXX:$enable_bootstrap" in
- *,c++,*:yes:yes) ;;
- *:yes:yes)
- as_fn_error "bootstrapping with --enable-build-with-cxx requires c++ in --enable-languages" "$LINENO" 5
- ;;
-esac
+# extrasub-{build,host,target} not because there is any reason to split
+# the substitutions up that way, but only to remain below the limit of
+# 99 commands in a script, for HP-UX sed.
+# Do not nest @if/@endif pairs, because configure will not warn you at all.
case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
yes:yes:*\ gold\ *:*,c++,*) ;;
# Also strip program-prefix, program-suffix, and program-transform-name,
# so that we can pass down a consistent program-transform-name.
baseargs=
+tbaseargs=
keep_next=no
skip_next=no
eval "set -- $ac_configure_args"
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
keep_next=no
continue
fi
;;
esac
+ skip_targ=no
+ case $ac_arg in
+
+ --with-* | --without-*)
+ libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
+
+ case $libopt in
+ *[-_]include)
+ lib=`echo "$libopt" | sed 's,[-_]include$,,'`
+ ;;
+ *[-_]lib)
+ lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
+ ;;
+ *)
+ lib=$libopt
+ ;;
+ esac
+
+
+ case $lib in
+ mpc | mpfr | gmp | ppl | cloog)
+ # If we're processing --with-$lib, --with-$lib-include or
+ # --with-$lib-lib, for one of the libs above, and target is
+ # different from host, don't pass the current argument to any
+ # target library's configure.
+ if test x$is_cross_compiler = xyes; then
+ skip_targ=yes
+ fi
+ ;;
+ esac
+ ;;
+ esac
+
case "$ac_arg" in
--cache-file=/dev/null | \
-cache-file=/dev/null )
# Handled here to avoid the test to skip args below.
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
# Assert: $separate_arg should always be no.
keep_next=$separate_arg
;;
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ if test X"$skip_targ" = Xno; then
+ tbaseargs="$tbaseargs '$ac_arg'"
+ fi
keep_next=$separate_arg
;;
*)
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
if test "$silent" = yes; then
baseargs="$baseargs --silent"
+ tbaseargs="$tbaseargs --silent"
fi
baseargs="$baseargs --disable-option-checking"
+tbaseargs="$tbaseargs --disable-option-checking"
# Record and document user additions to sub configure arguments.
# This seems to be due to autoconf 2.5x stupidity.
host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
-target_configargs="$target_configargs ${baseargs}"
+target_configargs="$target_configargs ${tbaseargs}"
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
case " $build_configdirs " in
*" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
- *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
esac
for ac_prog in bison
+if test -n "$READELF"; then
+ ac_cv_prog_READELF=$READELF
+elif test -n "$ac_cv_prog_READELF"; then
+ READELF=$ac_cv_prog_READELF
+fi
+
+if test -n "$ac_cv_prog_READELF"; then
+ for ncn_progname in readelf; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$READELF"; then
+ ac_cv_prog_READELF="$READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_READELF="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF=$ac_cv_prog_READELF
+if test -n "$READELF"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
+$as_echo "$READELF" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+for ncn_progname in readelf; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$READELF"; then
+ ac_cv_prog_READELF="$READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_READELF="${ncn_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF=$ac_cv_prog_READELF
+if test -n "$READELF"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
+$as_echo "$READELF" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_READELF" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$READELF"; then
+ ac_cv_prog_READELF="$READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_READELF="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF=$ac_cv_prog_READELF
+if test -n "$READELF"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
+$as_echo "$READELF" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_READELF" && break
+done
+
+if test -z "$ac_cv_prog_READELF" ; then
+ set dummy readelf
+ if test $build = $host ; then
+ READELF="$2"
+ else
+ READELF="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
fi
- if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GFORTRAN_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GFORTRAN_FOR_TARGET=$ac_cv_prog_GFORTRAN_FOR_TARGET
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GFORTRAN_FOR_TARGET" >&5
+$as_echo "$GFORTRAN_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ set dummy gfortran
+ if test $build = $target ; then
+ GFORTRAN_FOR_TARGET="$2"
+ else
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+fi
+
+
+
+if test -n "$GOC_FOR_TARGET"; then
+ ac_cv_prog_GOC_FOR_TARGET=$GOC_FOR_TARGET
+elif test -n "$ac_cv_prog_GOC_FOR_TARGET"; then
+ GOC_FOR_TARGET=$ac_cv_prog_GOC_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_GOC_FOR_TARGET"; then
+ for ncn_progname in gccgo; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GOC_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GOC_FOR_TARGET"; then
+ ac_cv_prog_GOC_FOR_TARGET="$GOC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_GOC_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GOC_FOR_TARGET=$ac_cv_prog_GOC_FOR_TARGET
+if test -n "$GOC_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GOC_FOR_TARGET" >&5
+$as_echo "$GOC_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+if test -z "$ac_cv_prog_GOC_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in gccgo; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_GOC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GOC_FOR_TARGET"; then
+ for ncn_progname in gccgo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GOC_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GOC_FOR_TARGET"; then
+ ac_cv_prog_GOC_FOR_TARGET="$GOC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_GOC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GOC_FOR_TARGET=$ac_cv_prog_GOC_FOR_TARGET
+if test -n "$GOC_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GOC_FOR_TARGET" >&5
+$as_echo "$GOC_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_GOC_FOR_TARGET" && test $build = $target ; then
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GFORTRAN_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_GOC_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$GFORTRAN_FOR_TARGET"; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+ if test -n "$GOC_FOR_TARGET"; then
+ ac_cv_prog_GOC_FOR_TARGET="$GOC_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GOC_FOR_TARGET="${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-GFORTRAN_FOR_TARGET=$ac_cv_prog_GFORTRAN_FOR_TARGET
-if test -n "$GFORTRAN_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GFORTRAN_FOR_TARGET" >&5
-$as_echo "$GFORTRAN_FOR_TARGET" >&6; }
+GOC_FOR_TARGET=$ac_cv_prog_GOC_FOR_TARGET
+if test -n "$GOC_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GOC_FOR_TARGET" >&5
+$as_echo "$GOC_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+ test -n "$ac_cv_prog_GOC_FOR_TARGET" && break
done
fi
-if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
- set dummy gfortran
+if test -z "$ac_cv_prog_GOC_FOR_TARGET" ; then
+ set dummy gccgo
if test $build = $target ; then
- GFORTRAN_FOR_TARGET="$2"
+ GOC_FOR_TARGET="$2"
else
- GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ GOC_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
else
- GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+ GOC_FOR_TARGET="$ac_cv_prog_GOC_FOR_TARGET"
fi
+if test -z "$ac_cv_path_READELF_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for readelf in $with_build_time_tools" >&5
+$as_echo_n "checking for readelf in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/readelf; then
+ READELF_FOR_TARGET=`cd $with_build_time_tools && pwd`/readelf
+ ac_cv_path_READELF_FOR_TARGET=$READELF_FOR_TARGET
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_READELF_FOR_TARGET" >&5
+$as_echo "$ac_cv_path_READELF_FOR_TARGET" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ READELF_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=readelf`
+ test $READELF_FOR_TARGET = readelf && READELF_FOR_TARGET=
+ test -n "$READELF_FOR_TARGET" && ac_cv_path_READELF_FOR_TARGET=$READELF_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_READELF_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "readelf", so it can be a program name with args.
+set dummy readelf; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_READELF_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $READELF_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_READELF_FOR_TARGET="$READELF_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_READELF_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+READELF_FOR_TARGET=$ac_cv_path_READELF_FOR_TARGET
+if test -n "$READELF_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF_FOR_TARGET" >&5
+$as_echo "$READELF_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_READELF_FOR_TARGET" ; then
+
+
+if test -n "$READELF_FOR_TARGET"; then
+ ac_cv_prog_READELF_FOR_TARGET=$READELF_FOR_TARGET
+elif test -n "$ac_cv_prog_READELF_FOR_TARGET"; then
+ READELF_FOR_TARGET=$ac_cv_prog_READELF_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_READELF_FOR_TARGET"; then
+ for ncn_progname in readelf; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$READELF_FOR_TARGET"; then
+ ac_cv_prog_READELF_FOR_TARGET="$READELF_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_READELF_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF_FOR_TARGET=$ac_cv_prog_READELF_FOR_TARGET
+if test -n "$READELF_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF_FOR_TARGET" >&5
+$as_echo "$READELF_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+if test -z "$ac_cv_prog_READELF_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in readelf; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_READELF_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_READELF_FOR_TARGET"; then
+ for ncn_progname in readelf; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$READELF_FOR_TARGET"; then
+ ac_cv_prog_READELF_FOR_TARGET="$READELF_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_READELF_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF_FOR_TARGET=$ac_cv_prog_READELF_FOR_TARGET
+if test -n "$READELF_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF_FOR_TARGET" >&5
+$as_echo "$READELF_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_READELF_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$READELF_FOR_TARGET"; then
+ ac_cv_prog_READELF_FOR_TARGET="$READELF_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_READELF_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF_FOR_TARGET=$ac_cv_prog_READELF_FOR_TARGET
+if test -n "$READELF_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF_FOR_TARGET" >&5
+$as_echo "$READELF_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_READELF_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_READELF_FOR_TARGET" ; then
+ set dummy readelf
+ if test $build = $target ; then
+ READELF_FOR_TARGET="$2"
+ else
+ READELF_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ READELF_FOR_TARGET="$ac_cv_prog_READELF_FOR_TARGET"
+fi
+
+else
+ READELF_FOR_TARGET=$ac_cv_path_READELF_FOR_TARGET
+fi
+
+
+
+
if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for strip in $with_build_time_tools" >&5
esac
if test $ok = yes; then
# An in-tree tool is available and we can use it
- CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
$as_echo "just compiled" >&6; }
elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gccgo" >&5
+$as_echo_n "checking where to find the target gccgo... " >&6; }
+if test "x${build}" != "x${host}" ; then
+ if expr "x$GOC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $GOC_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ else
+ # Canadian cross, just use what we found
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,go,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GOC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+ elif expr "x$GOC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $GOC_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GOC_FOR_TARGET='$(GOC)'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+ else
+ # We need a cross tool
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target ld" >&5
$as_echo_n "checking where to find the target ld... " >&6; }
if test "x${build}" != "x${host}" ; then
fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target readelf" >&5
+$as_echo_n "checking where to find the target readelf... " >&6; }
+if test "x${build}" != "x${host}" ; then
+ if expr "x$READELF_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $READELF_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ else
+ # Canadian cross, just use what we found
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ READELF_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/readelf'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+ elif expr "x$READELF_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $READELF_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ READELF_FOR_TARGET='$(READELF)'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+ else
+ # We need a cross tool
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target strip" >&5
$as_echo_n "checking where to find the target strip... " >&6; }
if test "x${build}" != "x${host}" ; then
if test $ok = yes; then
# An in-tree tool is available and we can use it
- STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
+ STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip-new'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
$as_echo "just compiled" >&6; }
elif expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
esac
+# If using ENABLE_BUILD_POSTSTAGE1_WITH_CXX, pass
+# --enable-build-with-cxx after stage1.
+if test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
+ POSTSTAGE1_CONFIGURE_FLAGS=--enable-build-with-cxx
+else
+ POSTSTAGE1_CONFIGURE_FLAGS=
+fi
+
+
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"