--with-gmp-dir=PATH Specify source directory for GMP library"
ac_help="$ac_help
--with-gmp=PATH Specify directory for installed GMP library"
+ac_help="$ac_help
+ --enable-bootstrap Enable bootstrapping [no]"
ac_help="$ac_help
--enable-serial-[{host,target,build}-]configure
Force sequential configuration of
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:591: checking host system type" >&5
+echo "configure:593: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:612: checking target system type" >&5
+echo "configure:614: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:630: checking build system type" >&5
+echo "configure:632: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:685: checking for a BSD compatible install" >&5
+echo "configure:687: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+echo $ac_n "checking whether ln works""... $ac_c" 1>&6
+echo "configure:740: checking whether ln works" >&5
+if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata_t
+echo >conftestdata_f
+if ln conftestdata_f conftestdata_t 2>/dev/null
+then
+ acx_cv_prog_LN=ln
+else
+ acx_cv_prog_LN=no
+fi
+rm -f conftestdata_f conftestdata_t
-# Autoconf M4 include file defining utility macros for complex Canadian
-# cross builds.
-
-
-
-
-
-
-####
-# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
-# or AC_INIT.
-# These demand that AC_CANONICAL_SYSTEM be called beforehand.
-
-####
-# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
-# Code is pretty much lifted from autoconf2.53.
-
-
-
-####
-# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but requires the prefix if build!=host.
-
-
-
-####
-# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
-
-
-###
-# AC_PROG_CPP_WERROR
-# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
-# triggers warnings from the preprocessor. Will be in autoconf 2.58.
-# For now, using this also overrides header checks to use only the
-# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
-# bit harder from here).
-# Eventually autoconf will default to checking headers with the compiler
-# instead, and we'll have to do this differently.
-
-# AC_PROG_CPP_WERROR
-
-# Test for GNAT.
-# We require the gnatbind program, and a compiler driver that
-# understands Ada. We use the user's CC setting, already found.
-#
-# Sets the shell variable have_gnat to yes or no as appropriate, and
-# substitutes GNATBIND.
-
-
-
-
-
-
-
+fi
+if test $acx_cv_prog_LN = no; then
+ LN="cp"
+ echo "$ac_t""no, using $LN" 1>&6
+else
+ LN="$acx_cv_prog_LN"
+ echo "$ac_t""yes" 1>&6
+fi
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:764: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
### we might need to use some other shell than /bin/sh for running subshells
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1903: checking for $ac_word" >&5
+echo "configure:1891: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1933: checking for $ac_word" >&5
+echo "configure:1921: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1984: checking for $ac_word" >&5
+echo "configure:1972: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2016: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2004: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2027 "configure"
+#line 2015 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2032: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2020: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2058: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2046: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2063: checking whether we are using GNU C" >&5
+echo "configure:2051: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2091: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2079: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2127: checking for $ac_word" >&5
+echo "configure:2115: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2159: checking for $ac_word" >&5
+echo "configure:2147: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2192: checking whether compiler driver understands Ada" >&5
+echo "configure:2180: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2225: checking how to compare bootstrapped objects" >&5
+echo "configure:2213: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2298: checking for correct version of gmp.h" >&5
+echo "configure:2286: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2300 "configure"
+#line 2288 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2311: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2299: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for mpf_init in -lgmp""... $ac_c" 1>&6
-echo "configure:2324: checking for mpf_init in -lgmp" >&5
+echo "configure:2312: checking for mpf_init in -lgmp" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2329 "configure"
+#line 2317 "configure"
#include "confdefs.h"
#include <gmp.h>
int main() {
mpf_t n; mpf_init(n);
; return 0; }
EOF
-if { (eval echo configure:2336: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2798: checking for $ac_word" >&5
+echo "configure:2786: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2833: checking for $ac_word" >&5
+echo "configure:2821: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2868: checking for $ac_word" >&5
+echo "configure:2856: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# to maintain later. In this particular case, you just have to be careful
# not to nest @if/@endif pairs, because configure will not warn you at all.
+# Check whether --enable-bootstrap or --disable-bootstrap was given.
+if test "${enable_bootstrap+set}" = set; then
+ enableval="$enable_bootstrap"
+ :
+else
+ enable_bootstrap=no
+fi
+
+if test -d ${srcdir}/gcc; then
+ case "$host:$target:$enable_bootstrap" in
+ $build:$build:yes | *:no) ;;
+ *:yes) { echo "configure: error: cannot bootstrap a cross-compiler" 1>&2; exit 1; } ;;
+ *) { echo "configure: error: invalid option for --enable-bootstrap" 1>&2; exit 1; } ;;
+ esac
+else
+ if test $enable_bootstrap = yes; then
+ { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; }
+ fi
+fi
+
+case "$enable_bootstrap" in
+ yes)
+ default_target=bootstrap
+ bootstrap_suffix=bootstrap ;;
+ no)
+ default_target=all
+ bootstrap_suffix=no-bootstrap ;;
+esac
+
+
for module in ${build_modules} ; do
if test -z "${no_recursion}" \
&& test -f ${build_subdir}/${module}/Makefile; then
fi
extrasub="$extrasub
/^@if build-$module\$/d
-/^@endif build-$module\$/d"
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
done
for module in ${configdirs} ; do
if test -z "${no_recursion}" \
fi
extrasub="$extrasub
/^@if $module\$/d
-/^@endif $module\$/d"
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
done
for module in ${target_configdirs} ; do
if test -z "${no_recursion}" \
fi
extrasub="$extrasub
/^@if target-$module\$/d
-/^@endif target-$module\$/d"
+/^@endif target-$module\$/d
+/^@if target-$module-$bootstrap_suffix\$/d
+/^@endif target-$module-$bootstrap_suffix\$/d"
done
+
extrasub="$extrasub
/^@if /,/^@endif /d"
elif test "$host" = "$target"; then
GFORTRAN_FOR_TARGET='gfortran'
else
- GFORTRAN_FOR_TARGET=`echo gfortran | sed -e 's/x/x/' ${program_transform_name}`
+ GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"`
fi
case $GFORTRAN_FOR_TARGET in
*' $(FLAGS_FOR_TARGET)') ;;
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3443: checking for $ac_word" >&5
+echo "configure:3468: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3476: checking for $ac_word" >&5
+echo "configure:3501: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3515: checking for $ac_word" >&5
+echo "configure:3540: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3548: checking for $ac_word" >&5
+echo "configure:3573: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3587: checking for $ac_word" >&5
+echo "configure:3612: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3620: checking for $ac_word" >&5
+echo "configure:3645: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3659: checking for $ac_word" >&5
+echo "configure:3684: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3692: checking for $ac_word" >&5
+echo "configure:3717: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3731: checking for $ac_word" >&5
+echo "configure:3756: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3764: checking for $ac_word" >&5
+echo "configure:3789: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3803: checking for $ac_word" >&5
+echo "configure:3828: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3836: checking for $ac_word" >&5
+echo "configure:3861: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3875: checking for $ac_word" >&5
+echo "configure:3900: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3908: checking for $ac_word" >&5
+echo "configure:3933: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3947: checking for $ac_word" >&5
+echo "configure:3972: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3980: checking for $ac_word" >&5
+echo "configure:4005: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4019: checking for $ac_word" >&5
+echo "configure:4044: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4052: checking for $ac_word" >&5
+echo "configure:4077: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4101: checking for $ac_word" >&5
+echo "configure:4126: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4134: checking for $ac_word" >&5
+echo "configure:4159: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4173: checking for $ac_word" >&5
+echo "configure:4198: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4206: checking for $ac_word" >&5
+echo "configure:4231: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4245: checking for $ac_word" >&5
+echo "configure:4270: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4278: checking for $ac_word" >&5
+echo "configure:4303: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4317: checking for $ac_word" >&5
+echo "configure:4342: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4350: checking for $ac_word" >&5
+echo "configure:4375: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4389: checking for $ac_word" >&5
+echo "configure:4414: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4422: checking for $ac_word" >&5
+echo "configure:4447: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4461: checking for $ac_word" >&5
+echo "configure:4486: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4494: checking for $ac_word" >&5
+echo "configure:4519: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4533: checking for $ac_word" >&5
+echo "configure:4558: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4566: checking for $ac_word" >&5
+echo "configure:4591: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4651: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4676: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
esac
+# It makes debugging easier if we create as symlinks the stage directories
+# gcc for stageN-gcc and stage-prev for stage(N-1). In case this is not
+# possible, however, we can resort to mv.
+echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
+echo "configure:4723: checking if symbolic links between directories work" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "${LN_S}" = "ln -s" \
+ && mkdir confdir.s1 \
+ && ln -s confdir.s1 confdir.s2 \
+ && echo timestamp1 > confdir.s1/conftest.1 \
+ && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
+ && echo timestamp2 > confdir.s2/conftest.2 \
+ && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
+ && rm -f confdir.s2; then
+ gcc_cv_prog_ln_s_dir=yes
+else
+ gcc_cv_prog_ln_s_dir=yes
+fi
+rm -rf confdir.s1 confdir.s2
+fi
+
+echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6
+
+case ${gcc_cv_prog_ln_s_dir} in
+ yes)
+ CREATE_LINK_TO_DIR='ln -s $$1 $$2'
+ UNDO_LINK_TO_DIR='rm -f $$1' ;;
+ *)
+ CREATE_LINK_TO_DIR='mv $$1 $$2'
+ UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
+esac
+
+
+
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
# Check whether --enable-werror or --disable-werror was given.
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@LN@%$LN%g
+s%@LN_S@%$LN_S%g
s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
s%@build_subdir@%$build_subdir%g
s%@host_subdir@%$host_subdir%g
s%@DEFAULT_YACC@%$DEFAULT_YACC%g
s%@DEFAULT_M4@%$DEFAULT_M4%g
s%@DEFAULT_LEX@%$DEFAULT_LEX%g
+s%@default_target@%$default_target%g
/@serialization_dependencies@/r $serialization_dependencies
s%@serialization_dependencies@%%g
/@host_makefile_frag@/r $host_makefile_frag
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@stage1_cflags@%$stage1_cflags%g
+s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
+s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
s%@stage2_werror_flag@%$stage2_werror_flag%g
CEOF