PACKAGE_BUGREPORT=
ac_unique_file="move-if-change"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os build_noncanonical host_noncanonical target_noncanonical host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN LN_S TOPLEVEL_CONFIGURE_ARGUMENTS build_libsubdir build_subdir host_subdir target_subdir CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT GNATBIND ac_ct_GNATBIND GNATMAKE ac_ct_GNATMAKE do_compare gmplibs gmpinc stage1_languages SYSROOT_CFLAGS_FOR_TARGET RPATH_ENVVAR tooldir build_tooldir CONFIGURE_GDB_TK GDB_TK INSTALL_GDB_TK build_configargs build_configdirs host_configargs configdirs target_configargs CC_FOR_BUILD config_shell YACC BISON M4 LEX FLEX MAKEINFO EXPECT RUNTEST AR AS DLLTOOL LD LIPO NM RANLIB STRIP WINDRES OBJCOPY OBJDUMP CXX CFLAGS_FOR_BUILD CXXFLAGS CC_FOR_TARGET CXX_FOR_TARGET GCC_FOR_TARGET GCJ_FOR_TARGET GFORTRAN_FOR_TARGET AR_FOR_TARGET AS_FOR_TARGET DLLTOOL_FOR_TARGET LD_FOR_TARGET LIPO_FOR_TARGET NM_FOR_TARGET OBJDUMP_FOR_TARGET RANLIB_FOR_TARGET STRIP_FOR_TARGET WINDRES_FOR_TARGET RAW_CXX_FOR_TARGET FLAGS_FOR_TARGET COMPILER_AS_FOR_TARGET COMPILER_LD_FOR_TARGET COMPILER_NM_FOR_TARGET MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT stage1_cflags stage1_checking stage2_werror_flag datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS TOPLEVEL_CONFIGURE_ARGUMENTS build build_cpu build_vendor build_os build_noncanonical host_noncanonical target_noncanonical host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN LN_S build_libsubdir build_subdir host_subdir target_subdir CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CXX CXXFLAGS ac_ct_CXX GNATBIND ac_ct_GNATBIND GNATMAKE ac_ct_GNATMAKE do_compare gmplibs gmpinc ppllibs pplinc clooglibs clooginc stage1_languages SYSROOT_CFLAGS_FOR_TARGET DEBUG_PREFIX_CFLAGS_FOR_TARGET CFLAGS_FOR_TARGET CXXFLAGS_FOR_TARGET RPATH_ENVVAR GCC_SHLIB_SUBDIR tooldir build_tooldir CONFIGURE_GDB_TK GDB_TK INSTALL_GDB_TK build_configargs build_configdirs host_configargs configdirs target_configargs AR_FOR_BUILD AS_FOR_BUILD CC_FOR_BUILD CFLAGS_FOR_BUILD CXXFLAGS_FOR_BUILD CXX_FOR_BUILD DLLTOOL_FOR_BUILD GCJ_FOR_BUILD GFORTRAN_FOR_BUILD LDFLAGS_FOR_BUILD LD_FOR_BUILD NM_FOR_BUILD RANLIB_FOR_BUILD WINDMC_FOR_BUILD WINDRES_FOR_BUILD config_shell YACC BISON M4 LEX FLEX MAKEINFO EXPECT RUNTEST AR AS DLLTOOL LD LIPO NM RANLIB STRIP WINDRES WINDMC OBJCOPY OBJDUMP CC_FOR_TARGET CXX_FOR_TARGET GCC_FOR_TARGET GCJ_FOR_TARGET GFORTRAN_FOR_TARGET AR_FOR_TARGET AS_FOR_TARGET DLLTOOL_FOR_TARGET LD_FOR_TARGET LIPO_FOR_TARGET NM_FOR_TARGET OBJDUMP_FOR_TARGET RANLIB_FOR_TARGET STRIP_FOR_TARGET WINDRES_FOR_TARGET WINDMC_FOR_TARGET RAW_CXX_FOR_TARGET FLAGS_FOR_TARGET COMPILER_AS_FOR_TARGET COMPILER_LD_FOR_TARGET COMPILER_NM_FOR_TARGET MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT stage1_cflags stage1_checking stage2_werror_flag datarootdir docdir pdfdir htmldir LIBOBJS LTLIBOBJS'
ac_subst_files='serialization_dependencies host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag'
+ac_pwd=`pwd`
# Initialize some variables set by options.
ac_init_help=
ac_env_target_alias_value=$target_alias
ac_cv_env_target_alias_set=${target_alias+set}
ac_cv_env_target_alias_value=$target_alias
+ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'`
+
ac_env_CC_set=${CC+set}
ac_env_CC_value=$CC
ac_cv_env_CC_set=${CC+set}
ac_env_CPPFLAGS_value=$CPPFLAGS
ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CXX_set=${CXX+set}
+ac_env_CXX_value=$CXX
+ac_cv_env_CXX_set=${CXX+set}
+ac_cv_env_CXX_value=$CXX
+ac_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_env_CXXFLAGS_value=$CXXFLAGS
+ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_cv_env_CXXFLAGS_value=$CXXFLAGS
+ac_env_AR_set=${AR+set}
+ac_env_AR_value=$AR
+ac_cv_env_AR_set=${AR+set}
+ac_cv_env_AR_value=$AR
+ac_env_AS_set=${AS+set}
+ac_env_AS_value=$AS
+ac_cv_env_AS_set=${AS+set}
+ac_cv_env_AS_value=$AS
+ac_env_DLLTOOL_set=${DLLTOOL+set}
+ac_env_DLLTOOL_value=$DLLTOOL
+ac_cv_env_DLLTOOL_set=${DLLTOOL+set}
+ac_cv_env_DLLTOOL_value=$DLLTOOL
+ac_env_LD_set=${LD+set}
+ac_env_LD_value=$LD
+ac_cv_env_LD_set=${LD+set}
+ac_cv_env_LD_value=$LD
+ac_env_LIPO_set=${LIPO+set}
+ac_env_LIPO_value=$LIPO
+ac_cv_env_LIPO_set=${LIPO+set}
+ac_cv_env_LIPO_value=$LIPO
+ac_env_NM_set=${NM+set}
+ac_env_NM_value=$NM
+ac_cv_env_NM_set=${NM+set}
+ac_cv_env_NM_value=$NM
+ac_env_RANLIB_set=${RANLIB+set}
+ac_env_RANLIB_value=$RANLIB
+ac_cv_env_RANLIB_set=${RANLIB+set}
+ac_cv_env_RANLIB_value=$RANLIB
+ac_env_STRIP_set=${STRIP+set}
+ac_env_STRIP_value=$STRIP
+ac_cv_env_STRIP_set=${STRIP+set}
+ac_cv_env_STRIP_value=$STRIP
+ac_env_WINDRES_set=${WINDRES+set}
+ac_env_WINDRES_value=$WINDRES
+ac_cv_env_WINDRES_set=${WINDRES+set}
+ac_cv_env_WINDRES_value=$WINDRES
+ac_env_WINDMC_set=${WINDMC+set}
+ac_env_WINDMC_value=$WINDMC
+ac_cv_env_WINDMC_set=${WINDMC+set}
+ac_cv_env_WINDMC_value=$WINDMC
+ac_env_OBJCOPY_set=${OBJCOPY+set}
+ac_env_OBJCOPY_value=$OBJCOPY
+ac_cv_env_OBJCOPY_set=${OBJCOPY+set}
+ac_cv_env_OBJCOPY_value=$OBJCOPY
+ac_env_OBJDUMP_set=${OBJDUMP+set}
+ac_env_OBJDUMP_value=$OBJDUMP
+ac_cv_env_OBJDUMP_set=${OBJDUMP+set}
+ac_cv_env_OBJDUMP_value=$OBJDUMP
+ac_env_CC_FOR_TARGET_set=${CC_FOR_TARGET+set}
+ac_env_CC_FOR_TARGET_value=$CC_FOR_TARGET
+ac_cv_env_CC_FOR_TARGET_set=${CC_FOR_TARGET+set}
+ac_cv_env_CC_FOR_TARGET_value=$CC_FOR_TARGET
+ac_env_CXX_FOR_TARGET_set=${CXX_FOR_TARGET+set}
+ac_env_CXX_FOR_TARGET_value=$CXX_FOR_TARGET
+ac_cv_env_CXX_FOR_TARGET_set=${CXX_FOR_TARGET+set}
+ac_cv_env_CXX_FOR_TARGET_value=$CXX_FOR_TARGET
+ac_env_GCC_FOR_TARGET_set=${GCC_FOR_TARGET+set}
+ac_env_GCC_FOR_TARGET_value=$GCC_FOR_TARGET
+ac_cv_env_GCC_FOR_TARGET_set=${GCC_FOR_TARGET+set}
+ac_cv_env_GCC_FOR_TARGET_value=$GCC_FOR_TARGET
+ac_env_GCJ_FOR_TARGET_set=${GCJ_FOR_TARGET+set}
+ac_env_GCJ_FOR_TARGET_value=$GCJ_FOR_TARGET
+ac_cv_env_GCJ_FOR_TARGET_set=${GCJ_FOR_TARGET+set}
+ac_cv_env_GCJ_FOR_TARGET_value=$GCJ_FOR_TARGET
+ac_env_GFORTRAN_FOR_TARGET_set=${GFORTRAN_FOR_TARGET+set}
+ac_env_GFORTRAN_FOR_TARGET_value=$GFORTRAN_FOR_TARGET
+ac_cv_env_GFORTRAN_FOR_TARGET_set=${GFORTRAN_FOR_TARGET+set}
+ac_cv_env_GFORTRAN_FOR_TARGET_value=$GFORTRAN_FOR_TARGET
+ac_env_AR_FOR_TARGET_set=${AR_FOR_TARGET+set}
+ac_env_AR_FOR_TARGET_value=$AR_FOR_TARGET
+ac_cv_env_AR_FOR_TARGET_set=${AR_FOR_TARGET+set}
+ac_cv_env_AR_FOR_TARGET_value=$AR_FOR_TARGET
+ac_env_AS_FOR_TARGET_set=${AS_FOR_TARGET+set}
+ac_env_AS_FOR_TARGET_value=$AS_FOR_TARGET
+ac_cv_env_AS_FOR_TARGET_set=${AS_FOR_TARGET+set}
+ac_cv_env_AS_FOR_TARGET_value=$AS_FOR_TARGET
+ac_env_DLLTOOL_FOR_TARGET_set=${DLLTOOL_FOR_TARGET+set}
+ac_env_DLLTOOL_FOR_TARGET_value=$DLLTOOL_FOR_TARGET
+ac_cv_env_DLLTOOL_FOR_TARGET_set=${DLLTOOL_FOR_TARGET+set}
+ac_cv_env_DLLTOOL_FOR_TARGET_value=$DLLTOOL_FOR_TARGET
+ac_env_LD_FOR_TARGET_set=${LD_FOR_TARGET+set}
+ac_env_LD_FOR_TARGET_value=$LD_FOR_TARGET
+ac_cv_env_LD_FOR_TARGET_set=${LD_FOR_TARGET+set}
+ac_cv_env_LD_FOR_TARGET_value=$LD_FOR_TARGET
+ac_env_LIPO_FOR_TARGET_set=${LIPO_FOR_TARGET+set}
+ac_env_LIPO_FOR_TARGET_value=$LIPO_FOR_TARGET
+ac_cv_env_LIPO_FOR_TARGET_set=${LIPO_FOR_TARGET+set}
+ac_cv_env_LIPO_FOR_TARGET_value=$LIPO_FOR_TARGET
+ac_env_NM_FOR_TARGET_set=${NM_FOR_TARGET+set}
+ac_env_NM_FOR_TARGET_value=$NM_FOR_TARGET
+ac_cv_env_NM_FOR_TARGET_set=${NM_FOR_TARGET+set}
+ac_cv_env_NM_FOR_TARGET_value=$NM_FOR_TARGET
+ac_env_OBJDUMP_FOR_TARGET_set=${OBJDUMP_FOR_TARGET+set}
+ac_env_OBJDUMP_FOR_TARGET_value=$OBJDUMP_FOR_TARGET
+ac_cv_env_OBJDUMP_FOR_TARGET_set=${OBJDUMP_FOR_TARGET+set}
+ac_cv_env_OBJDUMP_FOR_TARGET_value=$OBJDUMP_FOR_TARGET
+ac_env_RANLIB_FOR_TARGET_set=${RANLIB_FOR_TARGET+set}
+ac_env_RANLIB_FOR_TARGET_value=$RANLIB_FOR_TARGET
+ac_cv_env_RANLIB_FOR_TARGET_set=${RANLIB_FOR_TARGET+set}
+ac_cv_env_RANLIB_FOR_TARGET_value=$RANLIB_FOR_TARGET
+ac_env_STRIP_FOR_TARGET_set=${STRIP_FOR_TARGET+set}
+ac_env_STRIP_FOR_TARGET_value=$STRIP_FOR_TARGET
+ac_cv_env_STRIP_FOR_TARGET_set=${STRIP_FOR_TARGET+set}
+ac_cv_env_STRIP_FOR_TARGET_value=$STRIP_FOR_TARGET
+ac_env_WINDRES_FOR_TARGET_set=${WINDRES_FOR_TARGET+set}
+ac_env_WINDRES_FOR_TARGET_value=$WINDRES_FOR_TARGET
+ac_cv_env_WINDRES_FOR_TARGET_set=${WINDRES_FOR_TARGET+set}
+ac_cv_env_WINDRES_FOR_TARGET_value=$WINDRES_FOR_TARGET
+ac_env_WINDMC_FOR_TARGET_set=${WINDMC_FOR_TARGET+set}
+ac_env_WINDMC_FOR_TARGET_value=$WINDMC_FOR_TARGET
+ac_cv_env_WINDMC_FOR_TARGET_set=${WINDMC_FOR_TARGET+set}
+ac_cv_env_WINDMC_FOR_TARGET_value=$WINDMC_FOR_TARGET
#
# Report the --help message.
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-libada Builds libada directory
- --enable-libssp Builds libssp directory
- --enable-stage1-languages=all choose additional languages to build during
+ --enable-gold use gold instead of ld
+ --enable-libada build libada directory
+ --enable-libssp build libssp directory
+ --disable-ppl-version-check disable check for PPL version
+ --disable-cloog-version-check disable check for CLooG version
+ --enable-stage1-languages[=all] choose additional languages to build during
stage1. Mostly useful for compiler development.
- --enable-objc-gc enable the use of Boehm's garbage collector with
- the GNU Objective-C runtime.
- --enable-bootstrap Enable bootstrapping yes if native build
- --enable-serial-{host,target,build}-configure
- Force sequential configuration of
+ --enable-objc-gc enable use of Boehm's garbage collector with the
+ GNU Objective-C runtime
+ --enable-bootstrap enable bootstrapping [yes if native build]
+ --enable-serial-[{host,target,build}-]configure
+ force sequential configuration of
sub-packages for the host, target or build
- machine, or all sub-packages
+ machine, or all sub-packages
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-stage1-checking=all choose additional checking for stage1
- of the compiler.
+ --enable-stage1-checking[=all] choose additional checking for stage1
+ of the compiler
--enable-werror enable -Werror in bootstrap stage2 and later
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
- --with-mpfr-dir=PATH This option has been REMOVED
- --with-mpfr=PATH Specify prefix directory for installed MPFR package
+ --with-mpfr-dir=PATH this option has been REMOVED
+ --with-mpfr=PATH specify prefix directory for installed MPFR package.
Equivalent to --with-mpfr-include=PATH/include
plus --with-mpfr-lib=PATH/lib
--with-mpfr-include=PATH
- Specify directory for installed MPFR include files
- --with-mpfr-lib=PATH Specify the directory for the installed MPFR library
- --with-gmp-dir=PATH This option has been REMOVED
- --with-gmp=PATH Specify prefix directory for the installed GMP package
+ specify directory for installed MPFR include files
+ --with-mpfr-lib=PATH specify directory for the installed MPFR library
+ --with-gmp-dir=PATH this option has been REMOVED
+ --with-gmp=PATH specify prefix directory for the installed GMP package.
Equivalent to --with-gmp-include=PATH/include
plus --with-gmp-lib=PATH/lib
- --with-gmp-include=PATH Specify directory for installed GMP include files
- --with-gmp-lib=PATH Specify the directory for the installed GMP library
- --with-build-sysroot=sysroot
+ --with-gmp-include=PATH specify directory for installed GMP include files
+ --with-gmp-lib=PATH specify directory for the installed GMP library
+ --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
+ when linking with PPL
+ --with-ppl=PATH Specify prefix directory for the installed PPL package
+ Equivalent to --with-ppl-include=PATH/include
+ plus --with-ppl-lib=PATH/lib
+ --with-ppl-include=PATH Specify directory for installed PPL include files
+ --with-ppl-lib=PATH Specify the directory for the installed PPL library
+ --with-cloog=PATH Specify prefix directory for the installed CLooG-PPL package
+ Equivalent to --with-cloog-include=PATH/include
+ plus --with-cloog-lib=PATH/lib
+ --with-cloog-include=PATH Specify directory for installed CLooG include files
+ --with-cloog-lib=PATH Specify the directory for the installed CLooG library
+ --with-build-sysroot=SYSROOT
use sysroot as the system root during the build
- --with-build-time-tools=path
+ --with-debug-prefix-map='A=B C=D ...'
+ map A to B, C to D ... in debug information
+ --with-build-time-tools=PATH
use given path to find target tools during the build
- --with-datarootdir Use datarootdir as the data root directory.
- --with-docdir Install documentation in this directory.
- --with-htmldir Install html in this directory.
+ --with-datarootdir use datarootdir as the data root directory.
+ --with-docdir install documentation in this directory.
+ --with-pdfdir install pdf in this directory.
+ --with-htmldir install html in this directory.
Some influential environment variables:
CC C compiler command
nonstandard directory <lib dir>
CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
headers in a nonstandard directory <include dir>
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ AR AR for the host
+ AS AS for the host
+ DLLTOOL DLLTOOL for the host
+ LD LD for the host
+ LIPO LIPO for the host
+ NM NM for the host
+ RANLIB RANLIB for the host
+ STRIP STRIP for the host
+ WINDRES WINDRES for the host
+ WINDMC WINDMC for the host
+ OBJCOPY OBJCOPY for the host
+ OBJDUMP OBJDUMP for the host
+ CC_FOR_TARGET
+ CC for the target
+ CXX_FOR_TARGET
+ CXX for the target
+ GCC_FOR_TARGET
+ GCC for the target
+ GCJ_FOR_TARGET
+ GCJ for the target
+ GFORTRAN_FOR_TARGET
+ GFORTRAN for the target
+ AR_FOR_TARGET
+ AR for the target
+ AS_FOR_TARGET
+ AS for the target
+ DLLTOOL_FOR_TARGET
+ DLLTOOL for the target
+ LD_FOR_TARGET
+ LD for the target
+ LIPO_FOR_TARGET
+ LIPO for the target
+ NM_FOR_TARGET
+ NM for the target
+ OBJDUMP_FOR_TARGET
+ OBJDUMP for the target
+ RANLIB_FOR_TARGET
+ RANLIB for the target
+ STRIP_FOR_TARGET
+ STRIP for the target
+ WINDRES_FOR_TARGET
+ WINDRES for the target
+ WINDMC_FOR_TARGET
+ WINDMC for the target
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
+ ac_cache_corrupted=:
+ else
+ { echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
# Pass precious variables to config.status.
fi
done
if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
{ { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+
+
+
+
+progname=$0
+# if PWD already has a value, it is probably wrong.
+if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
+
+# Export original configure arguments for use by sub-configures.
+# Quote arguments with shell meta charatcers.
+TOPLEVEL_CONFIGURE_ARGUMENTS=
+set -- "$progname" "$@"
+for ac_arg
+do
+ case "$ac_arg" in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
+ # if the argument is of the form -foo=baz, quote the baz part only
+ ac_arg=`echo "'$ac_arg'" | sed "s/^'\([-a-zA-Z0-9]*=\)/\\1'/"` ;;
+ *) ;;
+ esac
+ # Add the quoted argument to the list.
+ TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
+done
+if test "$silent" = yes; then
+ TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
+fi
+# Remove the initial space we just introduced and, as these will be
+# expanded by make, quote '$'.
+TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+
# Find the build, host, and target systems.
ac_aux_dir=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
# program-specific install script used by HP pwplus--don't use.
:
else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
fi
fi
done
esac
done
+rm -rf conftest.one conftest.two conftest.dir
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
- # removed, or if the path is relative.
+ # removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi
fi
config_shell=${CONFIG_SHELL-/bin/sh}
-progname=$0
-# if PWD already has a value, it is probably wrong.
-if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
-
-# Export original configure arguments for use by sub-configures. These
-# will be expanded by make, so quote '$'.
-tmp="$progname $@"
-sed -e 's,\$,$$,g' <<EOF_SED > conftestsed.out
-$tmp
-EOF_SED
-TOPLEVEL_CONFIGURE_ARGUMENTS=`cat conftestsed.out`
-rm -f conftestsed.out
-
-
moveifchange=${srcdir}/move-if-change
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr ppl cloog libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
+# If --enable-gold is used, "gold" will replace "ld".
host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libraries="target-libiberty \
- target-libgcc \
+target_libraries="target-libgcc \
+ target-libiberty \
target-libgloss \
target-newlib \
+ target-libgomp \
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
target-boehm-gc \
${libgcj} \
target-libobjc \
- target-libada \
- target-libgomp"
+ target-libada"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
target_configdirs=`echo ${target_libraries} ${target_tools}`
build_configdirs=`echo ${build_libs} ${build_tools}`
+
+
################################################################################
srcname="gnu development package"
# Make sure we don't let GNU ld be added if we didn't want it.
if test x$with_gnu_ld = xno ; then
use_gnu_ld=no
- noconfigdirs="$noconfigdirs ld"
+ noconfigdirs="$noconfigdirs ld gold"
fi
use_gnu_as=
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
+# Handle --enable-gold.
+
+# Check whether --enable-gold or --disable-gold was given.
+if test "${enable_gold+set}" = set; then
+ enableval="$enable_gold"
+ ENABLE_GOLD=$enableval
+else
+ ENABLE_GOLD=no
+fi;
+if test "${ENABLE_GOLD}" = "yes"; then
+ # Check for ELF target.
+ is_elf=no
+ case "${target}" in
+ *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
+ | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2*)
+ case "${target}" in
+ *-*-linux*aout* | *-*-linux*oldld*)
+ ;;
+ *)
+ is_elf=yes
+ ;;
+ esac
+ esac
+
+ if test "$is_elf" = "yes"; then
+ # Check for target supported by gold.
+ case "${target}" in
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-*)
+ configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
+ ;;
+ esac
+ fi
+fi
+
# Configure extra directories which are host specific
case "${host}" in
# Disable libmudflap on some systems.
if test x$enable_libmudflap = x ; then
case "${target}" in
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu)
# Enable libmudflap by default in GNU and friends.
;;
*-*-freebsd*)
if test x$enable_libgomp = x ; then
# Enable libgomp by default on hosted POSIX systems.
case "${target}" in
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
;;
*-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
;;
esac
fi
+# Default libgloss CPU subdirectory.
+libgloss_dir="$target_cpu"
case "${target}" in
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- powerpc-*-darwin* | i[3456789]86-*-darwin*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ powerpc-*-darwin*)
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ ;;
+ i[3456789]86-*-darwin* | x86_64-*-darwin[912]*)
+ noconfigdirs="$noconfigdirs ld gas gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
*) noconfigdirs="$noconfigdirs gdb readline"
;;
esac
+ libgloss_dir=wince
;;
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
arm-*-coff | strongarm-*-coff | xscale-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
+ libgloss_dir=arm
;;
arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+ libgloss_dir=arm
;;
arm*-*-linux-gnueabi)
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- noconfigdirs="$noconfigdirs target-libjava target-libobjc"
+ noconfigdirs="$noconfigdirs target-qthreads"
+ case ${with_newlib} in
+ no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ esac
+ libgloss_dir=arm
;;
arm*-*-symbianelf*)
noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
+ libgloss_dir=arm
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
;;
bfin-*-*)
noconfigdirs="$noconfigdirs gdb"
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
+ cr16-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ ;;
cris-*-* | crisv32-*-*)
unsupported_languages="$unsupported_languages java"
case "${target}" in
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-elf)
- unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
esac
+ libgloss_dir=cris
;;
crx-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
d30v-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
+ ep9312-*-elf | ep9312-*-coff)
+ libgloss_dir=arm
+ ;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
frv-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ moxie-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
+ ;;
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
hppa*-hp-hpux11*)
noconfigdirs="$noconfigdirs ld shellutils"
;;
+ hppa*-*-pro*)
+ libgloss_dir=pa
+ ;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
;;
+ ia64*-*-*vms*)
+ # No gdb or ld support yet.
+ noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+ ;;
i370-*-opened*)
;;
i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
+ libgloss_dir=i386
;;
i[3456789]86-*-linux*)
# The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ libgloss_dir=m68hc11
;;
m68k-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
m68k-*-coff*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ m68*-*-* | fido-*-*)
+ libgloss_dir=m68k
+ ;;
mcore-*-pe*)
# The EPOC C++ environment does not support exceptions or rtti,
# and so building libstdc++-v3 tends not to always work.
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
+ libgloss_dir=rs6000
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
+ libgloss_dir=rs6000
;;
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
+ libgloss_dir=rs6000
;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
m68k-apollo-*)
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
+ mips*-sde-elf*)
+ skipdirs="$skipdirs target-libiberty"
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x$with_newlib = xyes; then
+ noconfigdirs="$noconfigdirs gprof"
+ fi
+ libgloss_dir=mips
+ ;;
mips*-*-irix5*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
mips*-*-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- mips64*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ libgloss_dir=mips
;;
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ sparclet-*-aout* | sparc86x-*-*)
+ libgloss_dir=sparc
+ ;;
sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc64-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
+ libgloss_dir=sparc
;;
sparclite-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
+ libgloss_dir=sparc
;;
sparc-*-sunos4*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
- spu-*-*)
- skipdirs="target-libssp"
- ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
vax-*-*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- xtensa-*-*)
+ xtensa*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
ip2k-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-lynxos*)
host_makefile_frag="config/mh-djgpp"
;;
*-cygwin*)
+
+echo "$as_me:$LINENO: checking to see if cat works as expected" >&5
+echo $ECHO_N "checking to see if cat works as expected... $ECHO_C" >&6
+echo a >cygwin-cat-check
+if test `cat cygwin-cat-check` == a ; then
+ rm cygwin-cat-check
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ rm cygwin-cat-check
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ { { echo "$as_me:$LINENO: error: The cat command does not ignore carriage return characters.
+ Please either mount the build directory in binary mode or run the following
+ commands before running any configure script:
+set -o igncr
+export SHELLOPTS
+ " >&5
+echo "$as_me: error: The cat command does not ignore carriage return characters.
+ Please either mount the build directory in binary mode or run the following
+ commands before running any configure script:
+set -o igncr
+export SHELLOPTS
+ " >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
host_makefile_frag="config/mh-cygwin"
;;
- *-mingw32*)
- ;;
- *-mingw64*)
+ *-mingw*)
+ host_makefile_frag="config/mh-mingw"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
# without overflowing the jump tables (-J says to use a 32 bit table)
tentative_cc="cc -J"
;;
- *-hp-hpux*)
+ hppa*-hp-hpux10*)
+ tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-pa-hpux10"
+ ;;
+ hppa*-hp-hpux* | hppa*-*-hiux*)
tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-pa"
;;
- *-*-hiux*)
+ hppa*-*)
+ host_makefile_frag="config/mh-pa"
+ ;;
+ *-hp-hpux* | *-*-hiux*)
tentative_cc="cc -Wp,-H256000"
;;
rs6000-*-lynxos*)
fi
if test "${build}" != "${host}" ; then
- # If we are doing a Canadian Cross, in which the host and build systems
- # are not the same, we set reasonable default values for the tools.
-
- CC=${CC-${host_noncanonical}-gcc}
- CFLAGS=${CFLAGS-"-g -O2"}
- CXX=${CXX-${host_noncanonical}-c++}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ AR_FOR_BUILD=${AR_FOR_BUILD-ar}
+ AS_FOR_BUILD=${AS_FOR_BUILD-as}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
-
-else
- # Set reasonable default values for some tools even if not Canadian.
- # Of course, these are different reasonable default values, originally
- # specified directly in the Makefile.
- # We don't export, so that autoconf can do its job.
- # Note that all these settings are above the fragment inclusion point
- # in Makefile.in, so can still be overridden by fragments.
- # This is all going to change when we autoconfiscate...
-
+ CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
+ GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
+ GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
+ DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
+ LD_FOR_BUILD=${LD_FOR_BUILD-ld}
+ NM_FOR_BUILD=${NM_FOR_BUILD-nm}
+ RANLIB_FOR_BUILD=${RANLIB_FOR_BUILD-ranlib}
+ WINDRES_FOR_BUILD=${WINDRES_FOR_BUILD-windres}
+ WINDMC_FOR_BUILD=${WINDMC_FOR_BUILD-windmc}
+else
+ AR_FOR_BUILD="\$(AR)"
+ AS_FOR_BUILD="\$(AS)"
CC_FOR_BUILD="\$(CC)"
- ac_ext=c
+ CXX_FOR_BUILD="\$(CXX)"
+ GCJ_FOR_BUILD="\$(GCJ)"
+ GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
+ DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
+ LD_FOR_BUILD="\$(LD)"
+ NM_FOR_BUILD="\$(NM)"
+ RANLIB_FOR_BUILD="\$(RANLIB)"
+ WINDRES_FOR_BUILD="\$(WINDRES)"
+ WINDMC_FOR_BUILD="\$(WINDMC)"
+fi
+
+ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
fi
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+test -z "$CC" && { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&5
echo "$as_me: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
# Provide some information about the compiler.
echo "$as_me:$LINENO:" \
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
See \`config.log' for more details." >&5
echo "$as_me: error: C compiler cannot create executables
See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
+ { (exit 77); exit 77; }; }; }
fi
ac_exeext=$ac_cv_exeext
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
fi
fi
esac
done
else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+ { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f conftest$ac_cv_exeext
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { (exit 1); exit 1; }; }; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- # We must set the default linker to the linker used by gcc for the correct
- # operation of libtool. If LD is not defined and we are using gcc, try to
- # set the LD default to the ld used by gcc.
- if test -z "$LD"; then
- if test "$GCC" = yes; then
- case $build in
- *-*-mingw*)
- gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
- *)
- gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
- esac
- case $gcc_prog_ld in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- LD="$gcc_prog_ld" ;;
- esac
- fi
- fi
-
- CXX=${CXX-"c++"}
- CFLAGS=${CFLAGS-"-g"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
-fi
-
-
-
-
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_GNATBIND+set}" = set; then
+if test "${ac_cv_prog_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$GNATBIND"; then
- ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-GNATBIND=$ac_cv_prog_GNATBIND
-if test -n "$GNATBIND"; then
- echo "$as_me:$LINENO: result: $GNATBIND" >&5
-echo "${ECHO_T}$GNATBIND" >&6
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ echo "$as_me:$LINENO: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
+ test -n "$CXX" && break
+ done
fi
-if test -z "$ac_cv_prog_GNATBIND"; then
- ac_ct_GNATBIND=$GNATBIND
- # Extract the first word of "gnatbind", so it can be a program name with args.
-set dummy gnatbind; ac_word=$2
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_GNATBIND+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$ac_ct_GNATBIND"; then
- ac_cv_prog_ac_ct_GNATBIND="$ac_ct_GNATBIND" # Let the user override the test.
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_GNATBIND="gnatbind"
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
- test -z "$ac_cv_prog_ac_ct_GNATBIND" && ac_cv_prog_ac_ct_GNATBIND="no"
fi
fi
-ac_ct_GNATBIND=$ac_cv_prog_ac_ct_GNATBIND
-if test -n "$ac_ct_GNATBIND"; then
- echo "$as_me:$LINENO: result: $ac_ct_GNATBIND" >&5
-echo "${ECHO_T}$ac_ct_GNATBIND" >&6
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- GNATBIND=$ac_ct_GNATBIND
-else
- GNATBIND="$ac_cv_prog_GNATBIND"
+ test -n "$ac_ct_CXX" && break
+done
+test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
+
+ CXX=$ac_ct_CXX
fi
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gnatmake", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gnatmake; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_GNATMAKE+set}" = set; then
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C++ compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$GNATMAKE"; then
- ac_cv_prog_GNATMAKE="$GNATMAKE" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_GNATMAKE="${ac_tool_prefix}gnatmake"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-fi
-fi
-GNATMAKE=$ac_cv_prog_GNATMAKE
-if test -n "$GNATMAKE"; then
- echo "$as_me:$LINENO: result: $GNATMAKE" >&5
-echo "${ECHO_T}$GNATMAKE" >&6
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_compiler_gnu=no
fi
-if test -z "$ac_cv_prog_GNATMAKE"; then
- ac_ct_GNATMAKE=$GNATMAKE
- # Extract the first word of "gnatmake", so it can be a program name with args.
-set dummy gnatmake; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_GNATMAKE+set}" = set; then
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
+GXX=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cxx_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$ac_ct_GNATMAKE"; then
- ac_cv_prog_ac_ct_GNATMAKE="$ac_ct_GNATMAKE" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_GNATMAKE="gnatmake"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_GNATMAKE" && ac_cv_prog_ac_ct_GNATMAKE="no"
-fi
-fi
-ac_ct_GNATMAKE=$ac_cv_prog_ac_ct_GNATMAKE
-if test -n "$ac_ct_GNATMAKE"; then
- echo "$as_me:$LINENO: result: $ac_ct_GNATMAKE" >&5
-echo "${ECHO_T}$ac_ct_GNATMAKE" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- GNATMAKE=$ac_ct_GNATMAKE
-else
- GNATMAKE="$ac_cv_prog_GNATMAKE"
-fi
-
-echo "$as_me:$LINENO: checking whether compiler driver understands Ada" >&5
-echo $ECHO_N "checking whether compiler driver understands Ada... $ECHO_C" >&6
-if test "${acx_cv_cc_gcc_supports_ada+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.adb <<EOF
-procedure conftest is begin null; end conftest;
-EOF
-acx_cv_cc_gcc_supports_ada=no
-# There is a bug in old released versions of GCC which causes the
-# driver to exit successfully when the appropriate language module
-# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
-# Therefore we must check for the error message as well as an
-# unsuccessful exit.
-# Other compilers, like HP Tru64 UNIX cc, exit successfully when
-# given a .adb file, but produce no object file. So we must check
-# if an object file was really produced to guard against this.
-errors=`(${CC} -c conftest.adb) 2>&1 || echo failure`
-if test x"$errors" = x && test -f conftest.$ac_objext; then
- acx_cv_cc_gcc_supports_ada=yes
-fi
-rm -f conftest.*
-fi
-echo "$as_me:$LINENO: result: $acx_cv_cc_gcc_supports_ada" >&5
-echo "${ECHO_T}$acx_cv_cc_gcc_supports_ada" >&6
-
-if test x$GNATBIND != xno && test x$GNATMAKE != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
- have_gnat=yes
-else
- have_gnat=no
-fi
-
-echo "$as_me:$LINENO: checking how to compare bootstrapped objects" >&5
-echo $ECHO_N "checking how to compare bootstrapped objects... $ECHO_C" >&6
-if test "${gcc_cv_prog_cmp_skip+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- echo abfoo >t1
- echo cdfoo >t2
- gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
- if cmp t1 t2 2 2 > /dev/null 2>&1; then
- if cmp t1 t2 1 1 > /dev/null 2>&1; then
- :
- else
- gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16'
- fi
- fi
- if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
- if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
- :
- else
- gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
- fi
- fi
- rm t1 t2
-
-fi
-echo "$as_me:$LINENO: result: $gcc_cv_prog_cmp_skip" >&5
-echo "${ECHO_T}$gcc_cv_prog_cmp_skip" >&6
-do_compare="$gcc_cv_prog_cmp_skip"
-
-
-
-# Check for GMP and MPFR
-gmplibs="-lmpfr -lgmp"
-gmpinc=
-have_gmp=no
-
-# Specify a location for mpfr
-# check for this first so it ends up on the link line before gmp.
-
-# Check whether --with-mpfr-dir or --without-mpfr-dir was given.
-if test "${with_mpfr_dir+set}" = set; then
- withval="$with_mpfr_dir"
- { { echo "$as_me:$LINENO: error: The --with-mpfr-dir=PATH option has been removed.
-Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH" >&5
-echo "$as_me: error: The --with-mpfr-dir=PATH option has been removed.
-Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH" >&2;}
- { (exit 1); exit 1; }; }
-fi;
-
-
-# Check whether --with-mpfr or --without-mpfr was given.
-if test "${with_mpfr+set}" = set; then
- withval="$with_mpfr"
-
-fi;
-
-# Check whether --with-mpfr_include or --without-mpfr_include was given.
-if test "${with_mpfr_include+set}" = set; then
- withval="$with_mpfr_include"
-
-fi;
-
-# Check whether --with-mpfr_lib or --without-mpfr_lib was given.
-if test "${with_mpfr_lib+set}" = set; then
- withval="$with_mpfr_lib"
-
-fi;
-
-if test "x$with_mpfr" != x; then
- gmplibs="-L$with_mpfr/lib $gmplibs"
- gmpinc="-I$with_mpfr/include"
-fi
-if test "x$with_mpfr_include" != x; then
- gmpinc="-I$with_mpfr_include"
-fi
-if test "x$with_mpfr_lib" != x; then
- gmplibs="-L$with_mpfr_lib $gmplibs"
-fi
-if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
- gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/.libs -L$$r/$(HOST_SUBDIR)/mpfr/_libs '"$gmplibs"
- gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
- # Do not test the mpfr version. Assume that it is sufficient, since
- # it is in the source tree, and the library has not been built yet
- # but it would be included on the link line in the version check below
- # hence making the test fail.
- have_gmp=yes
-fi
-
-# Specify a location for gmp
-
-# Check whether --with-gmp-dir or --without-gmp-dir was given.
-if test "${with_gmp_dir+set}" = set; then
- withval="$with_gmp_dir"
- { { echo "$as_me:$LINENO: error: The --with-gmp-dir=PATH option has been removed.
-Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH" >&5
-echo "$as_me: error: The --with-gmp-dir=PATH option has been removed.
-Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH" >&2;}
- { (exit 1); exit 1; }; }
-fi;
-
-
-# Check whether --with-gmp or --without-gmp was given.
-if test "${with_gmp+set}" = set; then
- withval="$with_gmp"
-
-fi;
-
-# Check whether --with-gmp_include or --without-gmp_include was given.
-if test "${with_gmp_include+set}" = set; then
- withval="$with_gmp_include"
-
-fi;
-
-# Check whether --with-gmp_lib or --without-gmp_lib was given.
-if test "${with_gmp_lib+set}" = set; then
- withval="$with_gmp_lib"
-
-fi;
-
-
-if test "x$with_gmp" != x; then
- gmplibs="-L$with_gmp/lib $gmplibs"
- gmpinc="-I$with_gmp/include $gmpinc"
-fi
-if test "x$with_gmp_include" != x; then
- gmpinc="-I$with_gmp_include $gmpinc"
-fi
-if test "x$with_gmp_lib" != x; then
- gmplibs="-L$with_gmp_lib $gmplibs"
-fi
-if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
- gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/gmp/_libs '"$gmplibs"
- gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
- # Do not test the gmp version. Assume that it is sufficient, since
- # it is in the source tree, and the library has not been built yet
- # but it would be included on the link line in the version check below
- # hence making the test fail.
- have_gmp=yes
-fi
-
-if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
- have_gmp=yes
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $gmpinc"
- # Check GMP actually works
- echo "$as_me:$LINENO: checking for correct version of gmp.h" >&5
-echo $ECHO_N "checking for correct version of gmp.h... $ECHO_C" >&6
-
-cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include "gmp.h"
+
int
main ()
{
- #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 1)
- choke me
- #endif
-
;
return 0;
}
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
+ { ac_try='test -z "$ac_cxx_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+ ac_cv_prog_cxx_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; have_gmp=no
+ac_cv_prog_cxx_g=no
fi
rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
- if test x"$have_gmp" = xyes; then
- saved_LIBS="$LIBS"
- LIBS="$LIBS $gmplibs"
- echo "$as_me:$LINENO: checking for correct version of mpfr.h" >&5
-echo $ECHO_N "checking for correct version of mpfr.h... $ECHO_C" >&6
- cat >conftest.$ac_ext <<_ACEOF
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <gmp.h>
- #include <mpfr.h>
+$ac_declaration
+#include <stdlib.h>
int
main ()
{
-
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,0)
- choke me
- #endif
- mpfr_t n; mpfr_init(n);
- mpfr_t x; mpfr_init(x);
- int t;
- mpfr_atan2 (n, n, x, GMP_RNDN);
- mpfr_erfc (n, x, GMP_RNDN);
- mpfr_subnormalize (x, t, GMP_RNDN);
-
+exit (42);
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
+ { ac_try='test -z "$ac_cxx_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <gmp.h>
- #include <mpfr.h>
+$ac_declaration
int
main ()
{
-
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
- choke me
- #endif
- mpfr_t n; mpfr_init(n);
-
+exit (42);
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
+ { ac_try='test -z "$ac_cxx_werror_flag"
|| test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+ break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-echo "$as_me:$LINENO: result: buggy but acceptable" >&5
-echo "${ECHO_T}buggy but acceptable" >&6
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; have_gmp=no
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$saved_LIBS"
- fi
- CFLAGS="$saved_CFLAGS"
- if test x$have_gmp != xyes; then
- { { echo "$as_me:$LINENO: error: Building GCC requires GMP 4.1+ and MPFR 2.2.1+.
-Try the --with-gmp and/or --with-mpfr options to specify their locations.
-Copies of these libraries' source code can be found at their respective
-hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
-See also http://gcc.gnu.org/install/prerequisites.html for additional info.
-If you obtained GMP and/or MPFR from a vendor distribution package, make
-sure that you have installed both the libraries and the header files.
-They may be located in separate packages." >&5
-echo "$as_me: error: Building GCC requires GMP 4.1+ and MPFR 2.2.1+.
-Try the --with-gmp and/or --with-mpfr options to specify their locations.
-Copies of these libraries' source code can be found at their respective
-hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
-See also http://gcc.gnu.org/install/prerequisites.html for additional info.
-If you obtained GMP and/or MPFR from a vendor distribution package, make
-sure that you have installed both the libraries and the header files.
-They may be located in separate packages." >&2;}
- { (exit 1); exit 1; }; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# We must set the default linker to the linker used by gcc for the correct
+# operation of libtool. If LD is not defined and we are using gcc, try to
+# set the LD default to the ld used by gcc.
+if test -z "$LD"; then
+ if test "$GCC" = yes; then
+ case $build in
+ *-*-mingw*)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+ *)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+ esac
+ case $gcc_prog_ld in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ LD="$gcc_prog_ld" ;;
+ esac
fi
fi
-# Flags needed for both GMP and/or MPFR
-
-# By default, C is the only stage 1 language.
-stage1_languages=,c,
-# Figure out what language subdirectories are present.
-# Look if the user specified --enable-languages="..."; if not, use
-# the environment variable $LANGUAGES if defined. $LANGUAGES might
-# go away some day.
-# NB: embedded tabs in this IF block -- do not untabify
-if test -d ${srcdir}/gcc; then
- if test x"${enable_languages+set}" != xset; then
- if test x"${LANGUAGES+set}" = xset; then
- enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
- else
- enable_languages=all
- fi
- else
- if test x"${enable_languages}" = x ||
- test x"${enable_languages}" = xyes;
- then
- echo configure.in: --enable-languages needs at least one language argument 1>&2
- exit 1
- fi
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GNATBIND+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
-
- # 'f95' is the old name for the 'fortran' language. We issue a warning
- # and make the substitution.
- case ,${enable_languages}, in
- *,f95,*)
- echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
- enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
- ;;
- esac
+done
+done
- # First scan to see if an enabled language requires some other language.
- # We assume that a given config-lang.in will list all the language
- # front ends it requires, even if some are required indirectly.
- for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
- case ${lang_frag} in
- ..) ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[*]/config-lang.in) ;;
- *)
- # From the config-lang.in, get $language, $lang_requires
- language=
- lang_requires=
- . ${lang_frag}
- for other in ${lang_requires} ; do
- case ,${enable_languages}, in
- *,$other,*) ;;
- *,all,*) ;;
- *,$language,*)
- echo " \`$other' language required by \`$language'; enabling" 1>&2
- enable_languages="${enable_languages},${other}"
- ;;
- esac
- done
- ;;
- esac
- done
+fi
+fi
+GNATBIND=$ac_cv_prog_GNATBIND
+if test -n "$GNATBIND"; then
+ echo "$as_me:$LINENO: result: $GNATBIND" >&5
+echo "${ECHO_T}$GNATBIND" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
- new_enable_languages=,c,
- missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
- potential_languages=,c,
+fi
+if test -z "$ac_cv_prog_GNATBIND"; then
+ ac_ct_GNATBIND=$GNATBIND
+ # Extract the first word of "gnatbind", so it can be a program name with args.
+set dummy gnatbind; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_GNATBIND+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_GNATBIND"; then
+ ac_cv_prog_ac_ct_GNATBIND="$ac_ct_GNATBIND" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GNATBIND="gnatbind"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
- for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
- case ${lang_frag} in
- ..) ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[*]/config-lang.in) ;;
- *)
- # From the config-lang.in, get $language, $target_libs,
- # $lang_dirs, $boot_language, and $build_by_default
- language=
- target_libs=
- lang_dirs=
- subdir_requires=
- boot_language=no
- build_by_default=yes
- . ${lang_frag}
- if test x${language} = x; then
- echo "${lang_frag} doesn't set \$language." 1>&2
- exit 1
- fi
+ test -z "$ac_cv_prog_ac_ct_GNATBIND" && ac_cv_prog_ac_ct_GNATBIND="no"
+fi
+fi
+ac_ct_GNATBIND=$ac_cv_prog_ac_ct_GNATBIND
+if test -n "$ac_ct_GNATBIND"; then
+ echo "$as_me:$LINENO: result: $ac_ct_GNATBIND" >&5
+echo "${ECHO_T}$ac_ct_GNATBIND" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
- case ,${enable_languages}, in
- *,${language},*)
- # Language was explicitly selected; include it.
- add_this_lang=yes
- ;;
- *,all,*)
- # 'all' was selected, select it if it is a default language
- add_this_lang=${build_by_default}
- ;;
- *)
- add_this_lang=no
- ;;
- esac
+ GNATBIND=$ac_ct_GNATBIND
+else
+ GNATBIND="$ac_cv_prog_GNATBIND"
+fi
- # Disable languages that need other directories if these aren't available.
- for i in $subdir_requires; do
- test -f "$srcdir/gcc/$i/config-lang.in" && continue
- case ,${enable_languages}, in
- *,${language},*)
- # Specifically requested language; tell them.
- { { echo "$as_me:$LINENO: error: The gcc/$i directory contains parts of $language but is missing" >&5
-echo "$as_me: error: The gcc/$i directory contains parts of $language but is missing" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- *)
- # Silently disable.
- add_this_lang=unsupported
- ;;
- esac
- done
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gnatmake", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatmake; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GNATMAKE+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GNATMAKE"; then
+ ac_cv_prog_GNATMAKE="$GNATMAKE" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GNATMAKE="${ac_tool_prefix}gnatmake"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
- # Disable Ada if no preexisting GNAT is available.
- case ,${enable_languages},:${language}:${have_gnat} in
- *,${language},*:ada:no)
- # Specifically requested language; tell them.
- { { echo "$as_me:$LINENO: error: GNAT is required to build $language" >&5
-echo "$as_me: error: GNAT is required to build $language" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- *:ada:no)
- # Silently disable.
- add_this_lang=unsupported
- ;;
- esac
+fi
+fi
+GNATMAKE=$ac_cv_prog_GNATMAKE
+if test -n "$GNATMAKE"; then
+ echo "$as_me:$LINENO: result: $GNATMAKE" >&5
+echo "${ECHO_T}$GNATMAKE" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
- # Disable a language that is unsupported by the target.
- case " $unsupported_languages " in
- *" $language "*)
- add_this_lang=unsupported
- ;;
- esac
+fi
+if test -z "$ac_cv_prog_GNATMAKE"; then
+ ac_ct_GNATMAKE=$GNATMAKE
+ # Extract the first word of "gnatmake", so it can be a program name with args.
+set dummy gnatmake; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_GNATMAKE+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_GNATMAKE"; then
+ ac_cv_prog_ac_ct_GNATMAKE="$ac_ct_GNATMAKE" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GNATMAKE="gnatmake"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
- case $add_this_lang in
- unsupported)
- # Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
- ;;
- no)
- # Remove language-dependent dirs; still show language as supported.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
- potential_languages="${potential_languages}${language},"
- ;;
- yes)
- new_enable_languages="${new_enable_languages}${language},"
- potential_languages="${potential_languages}${language},"
- missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
- case ${boot_language} in
- yes)
- # Add to (comma-separated) list of stage 1 languages.
- stage1_languages="${stage1_languages}${language},"
- ;;
- esac
- ;;
- esac
- ;;
- esac
- done
+ test -z "$ac_cv_prog_ac_ct_GNATMAKE" && ac_cv_prog_ac_ct_GNATMAKE="no"
+fi
+fi
+ac_ct_GNATMAKE=$ac_cv_prog_ac_ct_GNATMAKE
+if test -n "$ac_ct_GNATMAKE"; then
+ echo "$as_me:$LINENO: result: $ac_ct_GNATMAKE" >&5
+echo "${ECHO_T}$ac_ct_GNATMAKE" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
- # Check whether --enable-stage1-languages or --disable-stage1-languages was given.
-if test "${enable_stage1_languages+set}" = set; then
- enableval="$enable_stage1_languages"
- case ,${enable_stage1_languages}, in
- ,no,|,,)
- # Set it to something that will have no effect in the loop below
- enable_stage1_languages=c ;;
- ,yes,)
- enable_stage1_languages=`echo $new_enable_languages | \
- sed -e "s/^,//" -e "s/,$//" ` ;;
- *,all,*)
- enable_stage1_languages=`echo ,$enable_stage1_languages, | \
- sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;;
- esac
+ GNATMAKE=$ac_ct_GNATMAKE
+else
+ GNATMAKE="$ac_cv_prog_GNATMAKE"
+fi
- # Add "good" languages from enable_stage1_languages to stage1_languages,
- # while "bad" languages go in missing_languages. Leave no duplicates.
- for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do
- case $potential_languages in
- *,$i,*)
- case $stage1_languages in
- *,$i,*) ;;
- *) stage1_languages="$stage1_languages$i," ;;
- esac ;;
- *)
- case $missing_languages in
- *,$i,*) ;;
- *) missing_languages="$missing_languages$i," ;;
- esac ;;
- esac
- done
-fi;
+echo "$as_me:$LINENO: checking whether compiler driver understands Ada" >&5
+echo $ECHO_N "checking whether compiler driver understands Ada... $ECHO_C" >&6
+if test "${acx_cv_cc_gcc_supports_ada+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
+EOF
+acx_cv_cc_gcc_supports_ada=no
+# There is a bug in old released versions of GCC which causes the
+# driver to exit successfully when the appropriate language module
+# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
+# Therefore we must check for the error message as well as an
+# unsuccessful exit.
+# Other compilers, like HP Tru64 UNIX cc, exit successfully when
+# given a .adb file, but produce no object file. So we must check
+# if an object file was really produced to guard against this.
+errors=`(${CC} -c conftest.adb) 2>&1 || echo failure`
+if test x"$errors" = x && test -f conftest.$ac_objext; then
+ acx_cv_cc_gcc_supports_ada=yes
+fi
+rm -f conftest.*
+fi
+echo "$as_me:$LINENO: result: $acx_cv_cc_gcc_supports_ada" >&5
+echo "${ECHO_T}$acx_cv_cc_gcc_supports_ada" >&6
- # Remove leading/trailing commas that were added for simplicity
- potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"`
- missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
- stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"`
- new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"`
+if test x$GNATBIND != xno && test x$GNATMAKE != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+ have_gnat=yes
+else
+ have_gnat=no
+fi
- if test "x$missing_languages" != x; then
- { { echo "$as_me:$LINENO: error:
-The following requested languages could not be built: ${missing_languages}
-Supported languages are: ${potential_languages}" >&5
-echo "$as_me: error:
-The following requested languages could not be built: ${missing_languages}
-Supported languages are: ${potential_languages}" >&2;}
- { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking how to compare bootstrapped objects" >&5
+echo $ECHO_N "checking how to compare bootstrapped objects... $ECHO_C" >&6
+if test "${gcc_cv_prog_cmp_skip+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ echo abfoo >t1
+ echo cdfoo >t2
+ gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
+ if cmp t1 t2 2 2 > /dev/null 2>&1; then
+ if cmp t1 t2 1 1 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16'
+ fi
fi
- if test "x$new_enable_languages" != "x$enable_languages"; then
- echo The following languages will be built: ${new_enable_languages}
- enable_languages="$new_enable_languages"
+ if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
+ if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
+ fi
fi
+ rm t1 t2
-
- ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
+echo "$as_me:$LINENO: result: $gcc_cv_prog_cmp_skip" >&5
+echo "${ECHO_T}$gcc_cv_prog_cmp_skip" >&6
+do_compare="$gcc_cv_prog_cmp_skip"
-# Handle --disable-<component> generically.
-for dir in $configdirs $build_configdirs $target_configdirs ; do
- dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
- if eval test x\${enable_${dirname}} "=" xno ; then
- noconfigdirs="$noconfigdirs $dir"
- fi
-done
-# Check for Boehm's garbage collector
-# Check whether --enable-objc-gc or --disable-objc-gc was given.
-if test "${enable_objc_gc+set}" = set; then
- enableval="$enable_objc_gc"
- case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
- *,objc,*:*:yes:*target-boehm-gc*)
- { { echo "$as_me:$LINENO: error: Boehm's garbage collector was requested yet not supported in this configuration" >&5
-echo "$as_me: error: Boehm's garbage collector was requested yet not supported in this configuration" >&2;}
- { (exit 1); exit 1; }; }
- ;;
-esac
-fi;
-# Make sure we only build Boehm's garbage collector if required.
-case ,${enable_languages},:${enable_objc_gc} in
- *,objc,*:yes)
- # Keep target-boehm-gc if requested for Objective-C.
- ;;
+# Check for GMP and MPFR
+gmplibs="-lmpfr -lgmp"
+gmpinc=
+have_gmp=no
+
+# Specify a location for mpfr
+# check for this first so it ends up on the link line before gmp.
+
+# Check whether --with-mpfr-dir or --without-mpfr-dir was given.
+if test "${with_mpfr_dir+set}" = set; then
+ withval="$with_mpfr_dir"
+ { { echo "$as_me:$LINENO: error: The --with-mpfr-dir=PATH option has been removed.
+Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH" >&5
+echo "$as_me: error: The --with-mpfr-dir=PATH option has been removed.
+Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH" >&2;}
+ { (exit 1); exit 1; }; }
+fi;
+
+
+# Check whether --with-mpfr or --without-mpfr was given.
+if test "${with_mpfr+set}" = set; then
+ withval="$with_mpfr"
+
+fi;
+
+# Check whether --with-mpfr_include or --without-mpfr_include was given.
+if test "${with_mpfr_include+set}" = set; then
+ withval="$with_mpfr_include"
+
+fi;
+
+# Check whether --with-mpfr_lib or --without-mpfr_lib was given.
+if test "${with_mpfr_lib+set}" = set; then
+ withval="$with_mpfr_lib"
+
+fi;
+
+if test "x$with_mpfr" != x; then
+ gmplibs="-L$with_mpfr/lib $gmplibs"
+ gmpinc="-I$with_mpfr/include"
+fi
+if test "x$with_mpfr_include" != x; then
+ gmpinc="-I$with_mpfr_include"
+fi
+if test "x$with_mpfr_lib" != x; then
+ gmplibs="-L$with_mpfr_lib $gmplibs"
+fi
+if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
+ gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/.libs -L$$r/$(HOST_SUBDIR)/mpfr/_libs '"$gmplibs"
+ gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
+ # Do not test the mpfr version. Assume that it is sufficient, since
+ # it is in the source tree, and the library has not been built yet
+ # but it would be included on the link line in the version check below
+ # hence making the test fail.
+ have_gmp=yes
+fi
+
+# Specify a location for gmp
+
+# Check whether --with-gmp-dir or --without-gmp-dir was given.
+if test "${with_gmp_dir+set}" = set; then
+ withval="$with_gmp_dir"
+ { { echo "$as_me:$LINENO: error: The --with-gmp-dir=PATH option has been removed.
+Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH" >&5
+echo "$as_me: error: The --with-gmp-dir=PATH option has been removed.
+Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH" >&2;}
+ { (exit 1); exit 1; }; }
+fi;
+
+
+# Check whether --with-gmp or --without-gmp was given.
+if test "${with_gmp+set}" = set; then
+ withval="$with_gmp"
+
+fi;
+
+# Check whether --with-gmp_include or --without-gmp_include was given.
+if test "${with_gmp_include+set}" = set; then
+ withval="$with_gmp_include"
+
+fi;
+
+# Check whether --with-gmp_lib or --without-gmp_lib was given.
+if test "${with_gmp_lib+set}" = set; then
+ withval="$with_gmp_lib"
+
+fi;
+
+
+if test "x$with_gmp" != x; then
+ gmplibs="-L$with_gmp/lib $gmplibs"
+ gmpinc="-I$with_gmp/include $gmpinc"
+fi
+if test "x$with_gmp_include" != x; then
+ gmpinc="-I$with_gmp_include $gmpinc"
+fi
+if test "x$with_gmp_lib" != x; then
+ gmplibs="-L$with_gmp_lib $gmplibs"
+fi
+if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
+ gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/gmp/_libs '"$gmplibs"
+ gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
+ # Do not test the gmp version. Assume that it is sufficient, since
+ # it is in the source tree, and the library has not been built yet
+ # but it would be included on the link line in the version check below
+ # hence making the test fail.
+ have_gmp=yes
+fi
+
+if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
+ have_gmp=yes
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $gmpinc"
+ # Check GMP actually works
+ echo "$as_me:$LINENO: checking for correct version of gmp.h" >&5
+echo $ECHO_N "checking for correct version of gmp.h... $ECHO_C" >&6
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include "gmp.h"
+int
+main ()
+{
+
+ #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 2)
+ choke me
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; have_gmp=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ if test x"$have_gmp" = xyes; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $gmplibs"
+ echo "$as_me:$LINENO: checking for correct version of mpfr.h" >&5
+echo $ECHO_N "checking for correct version of mpfr.h... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <gmp.h>
+ #include <mpfr.h>
+int
+main ()
+{
+
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
+ choke me
+ #endif
+ mpfr_t n;
+ mpfr_t x;
+ int t;
+ mpfr_init (n);
+ mpfr_init (x);
+ mpfr_atan2 (n, n, x, GMP_RNDN);
+ mpfr_erfc (n, x, GMP_RNDN);
+ mpfr_subnormalize (x, t, GMP_RNDN);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <gmp.h>
+ #include <mpfr.h>
+int
+main ()
+{
+
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,2)
+ choke me
+ #endif
+ mpfr_t n; mpfr_init(n);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: buggy but acceptable" >&5
+echo "${ECHO_T}buggy but acceptable" >&6
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; have_gmp=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$saved_LIBS"
+ fi
+ CFLAGS="$saved_CFLAGS"
+
+ if test x$have_gmp != xyes; then
+ { { echo "$as_me:$LINENO: error: Building GCC requires GMP 4.2+ and MPFR 2.3.2+.
+Try the --with-gmp and/or --with-mpfr options to specify their locations.
+Copies of these libraries' source code can be found at their respective
+hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
+See also http://gcc.gnu.org/install/prerequisites.html for additional info.
+If you obtained GMP and/or MPFR from a vendor distribution package, make
+sure that you have installed both the libraries and the header files.
+They may be located in separate packages." >&5
+echo "$as_me: error: Building GCC requires GMP 4.2+ and MPFR 2.3.2+.
+Try the --with-gmp and/or --with-mpfr options to specify their locations.
+Copies of these libraries' source code can be found at their respective
+hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
+See also http://gcc.gnu.org/install/prerequisites.html for additional info.
+If you obtained GMP and/or MPFR from a vendor distribution package, make
+sure that you have installed both the libraries and the header files.
+They may be located in separate packages." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+fi
+
+# Flags needed for both GMP and/or MPFR
+
+
+
+# Allow host libstdc++ to be specified for static linking with PPL.
+
+# Check whether --with-host-libstdcxx or --without-host-libstdcxx was given.
+if test "${with_host_libstdcxx+set}" = set; then
+ withval="$with_host_libstdcxx"
+
+fi;
+
+case $with_host_libstdcxx in
+ no|yes)
+ { { echo "$as_me:$LINENO: error: -with-host-libstdcxx needs an argument" >&5
+echo "$as_me: error: -with-host-libstdcxx needs an argument" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+
+# Check for PPL
+ppl_major_version=0
+ppl_minor_version=10
+ppllibs=" -lppl_c -lppl -lgmpxx $with_host_libstdcxx "
+pplinc=
+
+
+# Check whether --with-ppl or --without-ppl was given.
+if test "${with_ppl+set}" = set; then
+ withval="$with_ppl"
+
+fi;
+
+# Check whether --with-ppl_include or --without-ppl_include was given.
+if test "${with_ppl_include+set}" = set; then
+ withval="$with_ppl_include"
+
+fi;
+
+# Check whether --with-ppl_lib or --without-ppl_lib was given.
+if test "${with_ppl_lib+set}" = set; then
+ withval="$with_ppl_lib"
+
+fi;
+
+case $with_ppl in
+ no)
+ ppllibs=
+ ;;
+ *)
+ ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx $with_host_libstdcxx"
+ pplinc="-I$with_ppl/include $pplinc"
+ LIBS="$ppllibs $LIBS"
+ ;;
+esac
+if test "x$with_ppl_include" != x; then
+ pplinc="-I$with_ppl_include $pplinc"
+fi
+if test "x$with_ppl_lib" != x; then
+ ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx $with_host_libstdcxx"
+ LIBS="$ppllibs $LIBS"
+fi
+if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/.libs -L$$r/$(HOST_SUBDIR)/ppl/_libs -lppl_c -lppl -lgmpxx '"$with_host_libstdcxx "
+ pplinc='-I$$r/$(HOST_SUBDIR)/ppl/include -I$$s/ppl/include '
+ LIBS="$ppllibs $LIBS"
+fi
+
+# Check whether --enable-ppl-version-check or --disable-ppl-version-check was given.
+if test "${enable_ppl_version_check+set}" = set; then
+ enableval="$enable_ppl_version_check"
+ ENABLE_PPL_CHECK=$enableval
+else
+ ENABLE_PPL_CHECK=yes
+fi;
+
+if test "${ENABLE_PPL_CHECK}" = "yes"; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ echo "$as_me:$LINENO: checking for version $ppl_major_version.$ppl_minor_version of PPL" >&5
+echo $ECHO_N "checking for version $ppl_major_version.$ppl_minor_version of PPL... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include "ppl_c.h"
+int
+main ()
+{
+
+ #if PPL_VERSION_MAJOR != $ppl_major_version || PPL_VERSION_MINOR != $ppl_minor_version
+ choke me
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; ppllibs= ; pplinc=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$saved_CFLAGS"
+fi
+
+# Flags needed for PPL
+
+
+
+
+# Check for CLOOG
+clooglibs=" -lcloog "
+clooginc=" -DCLOOG_PPL_BACKEND "
+
+
+# Check whether --with-cloog or --without-cloog was given.
+if test "${with_cloog+set}" = set; then
+ withval="$with_cloog"
+
+fi;
+
+# Check whether --with-cloog_include or --without-cloog_include was given.
+if test "${with_cloog_include+set}" = set; then
+ withval="$with_cloog_include"
+
+fi;
+
+# Check whether --with-cloog_lib or --without-cloog_lib was given.
+if test "${with_cloog_lib+set}" = set; then
+ withval="$with_cloog_lib"
+
+fi;
+
+case $with_cloog in
+ no)
+ clooglibs=
+ clooginc=
+ ;;
+ *)
+ clooglibs="-L$with_cloog/lib -lcloog"
+ clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND "
+ LIBS="$clooglibs $LIBS"
+ ;;
+esac
+if test "x$with_cloog_include" != x; then
+ clooginc="-I$with_cloog_include -DCLOOG_PPL_BACKEND "
+fi
+if test "x$with_cloog_lib" != x; then
+ clooglibs="-L$with_cloog_lib -lcloog"
+ LIBS="$clooglibs $LIBS"
+fi
+if test "x$with_cloog$with_cloog_include$with_cloog_lib" = x && test -d ${srcdir}/cloog; then
+ clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/.libs -L$$r/$(HOST_SUBDIR)/cloog/_libs -lcloog '
+ clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include -DCLOOG_PPL_BACKEND '
+ LIBS="$clooglibs $LIBS"
+fi
+
+# Check whether --enable-cloog-version-check or --disable-cloog-version-check was given.
+if test "${enable_cloog_version_check+set}" = set; then
+ enableval="$enable_cloog_version_check"
+ ENABLE_CLOOG_CHECK=$enableval
+else
+ ENABLE_CLOOG_CHECK=yes
+fi;
+
+if test "${ENABLE_CLOOG_CHECK}" = "yes"; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $clooginc $gmpinc $pplinc"
+ echo "$as_me:$LINENO: checking for correct version of CLooG" >&5
+echo $ECHO_N "checking for correct version of CLooG... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include "cloog/cloog.h"
+int
+main ()
+{
+
+ #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15
+ choke me
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; clooglibs= ; clooginc=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$saved_CFLAGS"
+fi
+
+# Flags needed for CLOOG
+
+
+
+
+# By default, C is the only stage 1 language.
+stage1_languages=,c,
+
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
+if test -d ${srcdir}/gcc; then
+ if test x"${enable_languages+set}" != xset; then
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ else
+ enable_languages=all
+ fi
+ else
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
+ exit 1
+ fi
+ fi
+ enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
+ # 'f95' is the old name for the 'fortran' language. We issue a warning
+ # and make the substitution.
+ case ,${enable_languages}, in
+ *,f95,*)
+ echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+ enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
+ ;;
+ esac
+
+ # First scan to see if an enabled language requires some other language.
+ # We assume that a given config-lang.in will list all the language
+ # front ends it requires, even if some are required indirectly.
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $lang_requires
+ language=
+ lang_requires=
+ . ${lang_frag}
+ for other in ${lang_requires} ; do
+ case ,${enable_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *,$language,*)
+ echo " \`$other' language required by \`$language'; enabling" 1>&2
+ enable_languages="${enable_languages},${other}"
+ ;;
+ esac
+ done
+ ;;
+ esac
+ done
+
+ new_enable_languages=,c,
+ missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+ potential_languages=,c,
+
+ for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+ case ${lang_frag} in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ # From the config-lang.in, get $language, $target_libs,
+ # $lang_dirs, $boot_language, and $build_by_default
+ language=
+ target_libs=
+ lang_dirs=
+ subdir_requires=
+ boot_language=no
+ build_by_default=yes
+ . ${lang_frag}
+ if test x${language} = x; then
+ echo "${lang_frag} doesn't set \$language." 1>&2
+ exit 1
+ fi
+
+ case ,${enable_languages}, in
+ *,${language},*)
+ # Language was explicitly selected; include it.
+ add_this_lang=yes
+ ;;
+ *,all,*)
+ # 'all' was selected, select it if it is a default language
+ add_this_lang=${build_by_default}
+ ;;
+ *)
+ add_this_lang=no
+ ;;
+ esac
+
+ # Disable languages that need other directories if these aren't available.
+ for i in $subdir_requires; do
+ test -f "$srcdir/gcc/$i/config-lang.in" && continue
+ case ,${enable_languages}, in
+ *,${language},*)
+ # Specifically requested language; tell them.
+ { { echo "$as_me:$LINENO: error: The gcc/$i directory contains parts of $language but is missing" >&5
+echo "$as_me: error: The gcc/$i directory contains parts of $language but is missing" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ *)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+ done
+
+ # Disable Ada if no preexisting GNAT is available.
+ case ,${enable_languages},:${language}:${have_gnat} in
+ *,${language},*:ada:no)
+ # Specifically requested language; tell them.
+ { { echo "$as_me:$LINENO: error: GNAT is required to build $language" >&5
+echo "$as_me: error: GNAT is required to build $language" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ *:ada:no)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=unsupported
+ ;;
+ esac
+
+ case $add_this_lang in
+ unsupported)
+ # Remove language-dependent dirs.
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ ;;
+ no)
+ # Remove language-dependent dirs; still show language as supported.
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ potential_languages="${potential_languages}${language},"
+ ;;
+ yes)
+ new_enable_languages="${new_enable_languages}${language},"
+ potential_languages="${potential_languages}${language},"
+ missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ case ${boot_language} in
+ yes)
+ # Add to (comma-separated) list of stage 1 languages.
+ stage1_languages="${stage1_languages}${language},"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+
+ # Check whether --enable-stage1-languages or --disable-stage1-languages was given.
+if test "${enable_stage1_languages+set}" = set; then
+ enableval="$enable_stage1_languages"
+ case ,${enable_stage1_languages}, in
+ ,no,|,,)
+ # Set it to something that will have no effect in the loop below
+ enable_stage1_languages=c ;;
+ ,yes,)
+ enable_stage1_languages=`echo $new_enable_languages | \
+ sed -e "s/^,//" -e "s/,$//" ` ;;
+ *,all,*)
+ enable_stage1_languages=`echo ,$enable_stage1_languages, | \
+ sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;;
+ esac
+
+ # Add "good" languages from enable_stage1_languages to stage1_languages,
+ # while "bad" languages go in missing_languages. Leave no duplicates.
+ for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do
+ case $potential_languages in
+ *,$i,*)
+ case $stage1_languages in
+ *,$i,*) ;;
+ *) stage1_languages="$stage1_languages$i," ;;
+ esac ;;
+ *)
+ case $missing_languages in
+ *,$i,*) ;;
+ *) missing_languages="$missing_languages$i," ;;
+ esac ;;
+ esac
+ done
+fi;
+
+ # Remove leading/trailing commas that were added for simplicity
+ potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"`
+ missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
+ stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"`
+ new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"`
+
+ if test "x$missing_languages" != x; then
+ { { echo "$as_me:$LINENO: error:
+The following requested languages could not be built: ${missing_languages}
+Supported languages are: ${potential_languages}" >&5
+echo "$as_me: error:
+The following requested languages could not be built: ${missing_languages}
+Supported languages are: ${potential_languages}" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ if test "x$new_enable_languages" != "x$enable_languages"; then
+ echo The following languages will be built: ${new_enable_languages}
+ enable_languages="$new_enable_languages"
+ fi
+
+
+ ac_configure_args=`echo " $ac_configure_args" | sed -e "s/ '--enable-languages=[^ ]*'//g" -e "s/$/ '--enable-languages="$enable_languages"'/" `
+fi
+
+# Handle --disable-<component> generically.
+for dir in $configdirs $build_configdirs $target_configdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
+ varname=`echo $dirname | sed -e s/+/_/g`
+ if eval test x\${enable_${varname}} "=" xno ; then
+ noconfigdirs="$noconfigdirs $dir"
+ fi
+done
+
+# Check for Boehm's garbage collector
+# Check whether --enable-objc-gc or --disable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then
+ enableval="$enable_objc_gc"
+ case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
+ *,objc,*:*:yes:*target-boehm-gc*)
+ { { echo "$as_me:$LINENO: error: Boehm's garbage collector was requested yet not supported in this configuration" >&5
+echo "$as_me: error: Boehm's garbage collector was requested yet not supported in this configuration" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+fi;
+
+# Make sure we only build Boehm's garbage collector if required.
+case ,${enable_languages},:${enable_objc_gc} in
+ *,objc,*:yes)
+ # Keep target-boehm-gc if requested for Objective-C.
+ ;;
+ *)
+ # Otherwise remove target-boehm-gc depending on target-libjava.
+ if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
+ noconfigdirs="$noconfigdirs target-boehm-gc"
+ fi
+ ;;
+esac
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+done
+
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries. In that case, we don't want to build target-libiberty.
+# Don't let libgcc imply libiberty either.
+if test -n "${target_configdirs}" ; then
+ libgcc=
+ others=
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ if test "$i" = "libgcc"; then
+ libgcc=target-libgcc
+ elif test "$i" != "libiberty" ; then
+ if test -r $srcdir/$i/configure ; then
+ others=yes;
+ break;
+ fi
+ fi
+ done
+ if test -z "${others}" ; then
+ target_configdirs=$libgcc
+ fi
+fi
+
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+build_configdirs_all="$build_configdirs"
+build_configdirs=
+for i in ${build_configdirs_all} ; do
+ j=`echo $i | sed -e s/build-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ build_configdirs="${build_configdirs} $i"
+ fi
+done
+
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+ if test -f ${srcdir}/$i/configure ; then
+ configdirs="${configdirs} $i"
+ fi
+done
+
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+ j=`echo $i | sed -e s/target-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ target_configdirs="${target_configdirs} $i"
+ fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if test -n "$appdirs" ; then
+ for dir in $appdirs ; do
+ if test -r $dir/Makefile.in ; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ fi
+ done
+ if test -n "$appdirs" ; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
+ echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+ echo " ${notsupp}" 1>&2
+ echo " (Any other directories should still work fine.)" 1>&2
+fi
+
+case "$host" in
+ *msdosdjgpp*)
+ enable_gdbtk=no ;;
+esac
+
+# To find our prefix, in gcc_cv_tool_prefix.
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+
+if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ gcc_cv_tool_prefix=$ac_default_prefix
+ else
+ gcc_cv_tool_prefix=$prefix
+ fi
+else
+ gcc_cv_tool_prefix=$exec_prefix
+fi
+
+# If there is no compiler in the tree, use the PATH only. In any
+# case, if there is no compiler in the tree nobody should use
+# AS_FOR_TARGET and LD_FOR_TARGET.
+if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
+ gcc_version=`cat $srcdir/gcc/BASE-VER`
+ gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
+else
+ gcc_cv_tool_dirs=
+fi
+
+if test x$build = x$target && test -n "$md_exec_prefix"; then
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+fi
+
+
+
+copy_dirs=
+
+
+# Check whether --with-build-sysroot or --without-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then
+ withval="$with_build_sysroot"
+ if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi;
+
+
+
+# Check whether --with-debug-prefix-map or --without-debug-prefix-map was given.
+if test "${with_debug_prefix_map+set}" = set; then
+ withval="$with_debug_prefix_map"
+ if test x"$withval" != x; then
+ DEBUG_PREFIX_CFLAGS_FOR_TARGET=
+ for debug_map in $withval; do
+ DEBUG_PREFIX_CFLAGS_FOR_TARGET="$DEBUG_PREFIX_CFLAGS_FOR_TARGET -fdebug-prefix-map=$debug_map"
+ done
+ fi
+else
+ DEBUG_PREFIX_CFLAGS_FOR_TARGET=
+fi;
+
+
+# During gcc bootstrap, if we use some random cc for stage1 then CFLAGS
+# might be empty or "-g". We don't require a C++ compiler, so CXXFLAGS
+# might also be empty (or "-g", if a non-GCC C++ compiler is in the path).
+# We want to ensure that TARGET libraries (which we know are built with
+# gcc) are built with "-O2 -g", so include those options when setting
+# CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
+if test "x$CFLAGS_FOR_TARGET" = x; then
+ CFLAGS_FOR_TARGET=$CFLAGS
+ case " $CFLAGS " in
+ *" -O2 "*) ;;
+ *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;;
+ esac
+ case " $CFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;;
+ esac
+fi
+
+
+if test "x$CXXFLAGS_FOR_TARGET" = x; then
+ CXXFLAGS_FOR_TARGET=$CXXFLAGS
+ case " $CXXFLAGS " in
+ *" -O2 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;;
+ esac
+ case " $CXXFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;;
+ esac
+fi
+
+
+# Handle --with-headers=XXX. If the value is not "yes", the contents of
+# the named directory are copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-headers is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_headers}" != xyes ; then
+ x=${gcc_cv_tool_prefix}
+ copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include"
+ fi
+fi
+
+# Handle --with-libs=XXX. If the value is not "yes", the contents of
+# the name directories are copied to $(tooldir)/lib. Multiple directories
+# are permitted.
+if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-libs is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_libs}" != xyes ; then
+ # Copy the libraries in reverse order, so that files in the first named
+ # library override files in subsequent libraries.
+ x=${gcc_cv_tool_prefix}
+ for l in ${with_libs}; do
+ copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}"
+ done
+ fi
+fi
+
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | egrep " (go)?ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+ :
+ else
+ echo Copying $1 to $2
+
+ # Use the install script to create the directory and all required
+ # parent directories.
+ if test -d $2 ; then
+ :
+ else
+ echo >config.temp
+ ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
+ fi
+
+ # Copy the directory, assuming we have tar.
+ # FIXME: Should we use B in the second tar? Not all systems support it.
+ (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+ # It is the responsibility of the user to correctly adjust all
+ # symlinks. If somebody can figure out how to handle them correctly
+ # here, feel free to add the code.
+
+ echo $1 > $2/COPIED
+ fi
+ shift; shift
+done
+
+# Determine a target-dependent exec_prefix that the installed
+# gcc will search in. Keep this list sorted by triplet, with
+# the *-*-osname triplets last.
+md_exec_prefix=
+case "${target}" in
+ alpha*-*-*vms*)
+ md_exec_prefix=/gnu/lib/gcc-lib
+ ;;
+ i[34567]86-pc-msdosdjgpp*)
+ md_exec_prefix=/dev/env/DJDIR/bin
+ ;;
+ i[34567]86-*-sco3.2v5*)
+ if test $with_gnu_as = yes; then
+ md_exec_prefix=/usr/gnu/bin
+ else
+ md_exec_prefix=/usr/ccs/bin/elf
+ fi
+ ;;
+
+ mn10300-*-* | \
+ powerpc-*-chorusos* | \
+ powerpc*-*-eabi* | \
+ powerpc*-*-sysv* | \
+ powerpc*-*-kaos* | \
+ s390x-ibm-tpf*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ sparc64-*-elf*)
+ ;;
+ v850*-*-*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ xtensa*-*-elf*)
+ ;;
+
+ *-*-beos* | \
+ *-*-elf* | \
+ *-*-hpux* | \
+ *-*-netware* | \
+ *-*-nto-qnx* | \
+ *-*-rtems* | \
+ *-*-solaris2* | \
+ *-*-sysv[45]* | \
+ *-*-vxworks* | \
+ *-wrs-windiss)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+esac
+
+extra_arflags_for_target=
+extra_nmflags_for_target=
+extra_ranlibflags_for_target=
+target_makefile_frag=/dev/null
+case "${target}" in
+ mep*-*-*)
+ target_makefile_frag="config/mt-mep"
+ ;;
+ spu-*-*)
+ target_makefile_frag="config/mt-spu"
+ ;;
+ mips*-sde-elf*)
+ target_makefile_frag="config/mt-sde"
+ ;;
+ mipsisa*-*-elfoabi*)
+ target_makefile_frag="config/mt-mips-elfoabi"
+ ;;
+ mips*-*-*linux* | mips*-*-gnu*)
+ target_makefile_frag="config/mt-mips-gnu"
+ ;;
+ *-*-netware*)
+ target_makefile_frag="config/mt-netware"
+ ;;
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+ target_makefile_frag="config/mt-gnu"
+ ;;
+ *-*-aix4.[3456789]* | *-*-aix[56789].*)
+ # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
+ # commands to handle both 32-bit and 64-bit objects. These flags are
+ # harmless if we're using GNU nm or ar.
+ extra_arflags_for_target=" -X32_64"
+ extra_nmflags_for_target=" -B -X32_64"
+ ;;
+ *-*-darwin*)
+ # ranlib from Darwin requires the -c flag to look at common symbols.
+ extra_ranlibflags_for_target=" -c"
+ ;;
+ mips*-*-pe | sh*-*-pe | *arm-wince-pe)
+ target_makefile_frag="config/mt-wince"
+ ;;
+esac
+
+alphaieee_frag=/dev/null
+case $target in
+ alpha*-*-*)
+ # This just makes sure to use the -mieee option to build target libs.
+ # This should probably be set individually by each library.
+ alphaieee_frag="config/mt-alphaieee"
+ ;;
+esac
+
+# If --enable-target-optspace always use -Os instead of -O2 to build
+# the target libraries, similarly if it is not specified, use -Os
+# on selected platforms.
+ospace_frag=/dev/null
+case "${enable_target_optspace}:${target}" in
+ yes:*)
+ ospace_frag="config/mt-ospace"
+ ;;
+ :d30v-*)
+ ospace_frag="config/mt-d30v"
+ ;;
+ :m32r-* | :d10v-* | :fr30-*)
+ ospace_frag="config/mt-ospace"
+ ;;
+ no:* | :*)
+ ;;
*)
- # Otherwise remove target-boehm-gc depending on target-libjava.
- if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
- noconfigdirs="$noconfigdirs target-boehm-gc"
- fi
+ echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
;;
esac
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
-# $build_configdirs and $target_configdirs.
-# If we have the source for $noconfigdirs entries, add them to $notsupp.
+# Default to using --with-stabs for certain targets.
+if test x${with_stabs} = x ; then
+ case "${target}" in
+ mips*-*-irix[56]*)
+ ;;
+ mips*-*-* | alpha*-*-osf*)
+ with_stabs=yes;
+ extra_host_args="${extra_host_args} --with-stabs"
+ ;;
+ esac
+fi
-notsupp=""
-for dir in . $skipdirs $noconfigdirs ; do
- dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
- if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
- fi
- fi
- fi
- if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
- fi
- fi
+# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
+# them automatically.
+case "${host}" in
+ hppa*64*-*-hpux11*)
+ extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+ ;;
+esac
+
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='${exec_prefix}'/${target_noncanonical}
+build_tooldir=${tooldir}
+
+# Create a .gdbinit file which runs the one in srcdir
+# and tells GDB to look there for source files.
+
+if test -r ${srcdir}/.gdbinit ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ./.gdbinit <<EOF
+# ${NO_EDIT}
+dir ${srcdir}
+dir .
+source ${srcdir}/.gdbinit
+EOF
+ ;;
+ esac
+fi
+
+# Make sure that the compiler is able to generate an executable. If it
+# can't, we are probably in trouble. We don't care whether we can run the
+# executable--we might be using a cross compiler--we only care whether it
+# can be created. At this point the main configure script has set CC.
+we_are_ok=no
+echo "int main () { return 0; }" > conftest.c
+${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ we_are_ok=yes
fi
- if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
+fi
+case $we_are_ok in
+ no)
+ echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
+ echo 1>&2 "*** You must set the environment variable CC to a working compiler."
+ rm -f conftest*
+ exit 1
+ ;;
+esac
+rm -f conftest*
+
+# The Solaris /usr/ucb/cc compiler does not appear to work.
+case "${host}" in
+ sparc-sun-solaris2*)
+ CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
+ if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
+ could_use=
+ test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
+ if test -d /opt/cygnus/bin ; then
+ if test "$could_use" = "" ; then
+ could_use="/opt/cygnus/bin"
+ else
+ could_use="$could_use or /opt/cygnus/bin"
+ fi
+ fi
+ if test "$could_use" = "" ; then
+ echo "Warning: compilation may fail because you're using"
+ echo "/usr/ucb/cc. You should change your PATH or CC "
+ echo "variable and rerun configure."
+ else
+ echo "Warning: compilation may fail because you're using"
+ echo "/usr/ucb/cc, when you should use the C compiler from"
+ echo "$could_use. You should change your"
+ echo "PATH or CC variable and rerun configure."
+ fi
fi
+ ;;
+esac
+
+# Decide which environment variable is used to find dynamic libraries.
+case "${host}" in
+ *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
+ *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
+esac
+
+# On systems where the dynamic library environment variable is PATH,
+# gcc/ will put dynamic libraries into a subdirectory to avoid adding
+# built executables to PATH.
+if test "$RPATH_ENVVAR" = PATH; then
+ GCC_SHLIB_SUBDIR=/shlib
+else
+ GCC_SHLIB_SUBDIR=
+fi
+
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+
+# Determine whether gdb needs tk/tcl or not.
+# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
+# and in that case we want gdb to be built without tk. Ugh!
+# In fact I believe gdb is the *only* package directly dependent on tk,
+# so we should be able to put the 'maybe's in unconditionally and
+# leave out the maybe dependencies when enable_gdbtk is false. I'm not
+# 100% sure that that's safe though.
+
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
+case "$enable_gdbtk" in
+ no)
+ GDB_TK="" ;;
+ yes)
+ GDB_TK="${gdb_tk}" ;;
+ *)
+ # Only add the dependency on gdbtk when GDBtk is part of the gdb
+ # distro. Eventually someone will fix this and move Insight, nee
+ # gdbtk to a separate directory.
+ if test -d ${srcdir}/gdb/gdbtk ; then
+ GDB_TK="${gdb_tk}"
+ else
+ GDB_TK=""
fi
+ ;;
+esac
+CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
+INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+
+# Strip out unwanted targets.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
+# Loop over modules. $extrasub must be used with care, limiting as
+# much as possible the usage of range addresses. That's because autoconf
+# splits the sed script to overcome limits in the number of commands,
+# and relying on carefully-timed sed passes may turn out to be very hard
+# to maintain later. In this particular case, you just have to be careful
+# not to nest @if/@endif pairs, because configure will not warn you at all.
+
+# Check whether --enable-bootstrap or --disable-bootstrap was given.
+if test "${enable_bootstrap+set}" = set; then
+ enableval="$enable_bootstrap"
+
+else
+ enable_bootstrap=default
+fi;
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+ *gcc*) have_compiler=yes ;;
+ *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+ *:*:*:no) ;;
+
+ # Default behavior. Enable bootstrap if we have a compiler
+ # and we are in a native configuration.
+ yes:$build:$build:default)
+ enable_bootstrap=yes ;;
+
+ *:*:*:default)
+ enable_bootstrap=no ;;
+
+ # We have a compiler and we are in a native configuration, bootstrap is ok
+ yes:$build:$build:yes)
+ ;;
+
+ # Other configurations, but we have a compiler. Assume the user knows
+ # what he's doing.
+ yes:*:*:yes)
+ { echo "$as_me:$LINENO: WARNING: trying to bootstrap a cross compiler" >&5
+echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
+ ;;
+
+ # No compiler: if they passed --enable-bootstrap explicitly, fail
+ no:*:*:yes)
+ { { echo "$as_me:$LINENO: error: cannot bootstrap without a compiler" >&5
+echo "$as_me: error: cannot bootstrap without a compiler" >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ # Fail if wrong command line
+ *)
+ { { echo "$as_me:$LINENO: error: invalid option for --enable-bootstrap" >&5
+echo "$as_me: error: invalid option for --enable-bootstrap" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case "$enable_bootstrap" in
+ yes)
+ bootstrap_suffix=bootstrap ;;
+ no)
+ bootstrap_suffix=no-bootstrap ;;
+esac
+
+for module in ${build_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${build_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${build_subdir}/${module}/Makefile
fi
+ extrasub="$extrasub
+/^@if build-$module\$/d
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
done
-
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries. In that case, we don't want to build target-libiberty.
-# Don't let libgcc imply libiberty either.
-if test -n "${target_configdirs}" ; then
- libgcc=
- others=
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if test "$i" = "libgcc"; then
- libgcc=target-libgcc
- elif test "$i" != "libiberty" ; then
- if test -r $srcdir/$i/configure ; then
- others=yes;
- break;
+for module in ${configdirs} ; do
+ if test -z "${no_recursion}"; then
+ for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
+ if test -f ${file}; then
+ echo 1>&2 "*** removing ${file} to force reconfigure"
+ rm -f ${file}
fi
- fi
- done
- if test -z "${others}" ; then
- target_configdirs=$libgcc
- fi
-fi
-
-# Quietly strip out all directories which aren't configurable in this tree.
-# This relies on all configurable subdirectories being autoconfiscated, which
-# is now the case.
-build_configdirs_all="$build_configdirs"
-build_configdirs=
-for i in ${build_configdirs_all} ; do
- j=`echo $i | sed -e s/build-//g`
- if test -f ${srcdir}/$j/configure ; then
- build_configdirs="${build_configdirs} $i"
+ done
fi
+ extrasub="$extrasub
+/^@if $module\$/d
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
done
-
-configdirs_all="$configdirs"
-configdirs=
-for i in ${configdirs_all} ; do
- if test -f ${srcdir}/$i/configure ; then
- configdirs="${configdirs} $i"
+for module in ${target_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${target_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${target_subdir}/${module}/Makefile
fi
+ extrasub="$extrasub
+/^@if target-$module\$/d
+/^@endif target-$module\$/d
+/^@if target-$module-$bootstrap_suffix\$/d
+/^@endif target-$module-$bootstrap_suffix\$/d"
done
-target_configdirs_all="$target_configdirs"
-target_configdirs=
-for i in ${target_configdirs_all} ; do
- j=`echo $i | sed -e s/target-//g`
- if test -f ${srcdir}/$j/configure ; then
- target_configdirs="${target_configdirs} $i"
- fi
+extrasub="$extrasub
+/^@if /,/^@endif /d"
+
+# Create the serialization dependencies. This uses a temporary file.
+
+# Check whether --enable-serial-configure or --disable-serial-configure was given.
+if test "${enable_serial_configure+set}" = set; then
+ enableval="$enable_serial_configure"
+
+fi;
+
+case ${enable_serial_configure} in
+ yes)
+ enable_serial_build_configure=yes
+ enable_serial_host_configure=yes
+ enable_serial_target_configure=yes
+ ;;
+esac
+
+# These force 'configure's to be done one at a time, to avoid problems
+# with contention over a shared config.cache.
+rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
+olditem=
+test "x${enable_serial_build_configure}" = xyes &&
+for item in ${build_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_host_configure}" = xyes &&
+for item in ${configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_target_configure}" = xyes &&
+for item in ${target_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
done
+serialization_dependencies=serdep.tmp
-# Produce a warning message for the subdirs we can't configure.
-# This isn't especially interesting in the Cygnus tree, but in the individual
-# FSF releases, it's important to let people know when their machine isn't
-# supported by the one or two programs in a package.
-if test -n "${notsupp}" && test -z "${norecursion}" ; then
- # If $appdirs is non-empty, at least one of those directories must still
- # be configured, or we error out. (E.g., if the gas release supports a
- # specified target in some subdirs but not the gas subdir, we shouldn't
- # pretend that all is well.)
- if test -n "$appdirs" ; then
- for dir in $appdirs ; do
- if test -r $dir/Makefile.in ; then
- if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- appdirs=""
- break
- fi
- if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
- appdirs=""
- break
- fi
- fi
- done
- if test -n "$appdirs" ; then
- echo "*** This configuration is not supported by this package." 1>&2
- exit 1
- fi
+# Base args. Strip norecursion, cache-file, srcdir, host, build,
+# target, nonopt, and variable assignments. These are the ones we
+# might not want to pass down to subconfigures. Also strip
+# program-prefix, program-suffix, and program-transform-name, so that
+# we can pass down a consistent program-transform-name.
+baseargs=
+keep_next=no
+skip_next=no
+eval "set -- $ac_configure_args"
+for ac_arg
+do
+ if test X"$skip_next" = X"yes"; then
+ skip_next=no
+ continue
fi
- # Okay, some application will build, or we don't care to check. Still
- # notify of subdirs not getting built.
- echo "*** This configuration is not supported in the following subdirectories:" 1>&2
- echo " ${notsupp}" 1>&2
- echo " (Any other directories should still work fine.)" 1>&2
+ if test X"$keep_next" = X"yes"; then
+ case $ac_arg in
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ baseargs="$baseargs '$ac_arg'"
+ keep_next=no
+ continue
+ fi
+
+ # Handle separated arguments. Based on the logic generated by
+ # autoconf 2.59.
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ separate_arg=no
+ ;;
+ -*)
+ separate_arg=yes
+ ;;
+ *)
+ separate_arg=no
+ ;;
+ esac
+
+ case "$ac_arg" in
+ --no*)
+ continue
+ ;;
+ --c* | \
+ --sr* | \
+ --ho* | \
+ --bu* | \
+ --t* | \
+ --program-* | \
+ -cache_file* | \
+ -srcdir* | \
+ -host* | \
+ -build* | \
+ -target* | \
+ -program-prefix* | \
+ -program-suffix* | \
+ -program-transform-name* )
+ skip_next=$separate_arg
+ continue
+ ;;
+ -*)
+ # An option. Add it.
+ case $ac_arg in
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ baseargs="$baseargs '$ac_arg'"
+ keep_next=$separate_arg
+ ;;
+ *)
+ # Either a variable assignment, or a nonopt (triplet). Don't
+ # pass it down; let the Makefile handle this.
+ continue
+ ;;
+ esac
+done
+# Remove the initial space we just introduced and, as these will be
+# expanded by make, quote '$'.
+baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+
+# Add in --program-transform-name, after --program-prefix and
+# --program-suffix have been applied to it. Autoconf has already
+# doubled dollar signs and backslashes in program_transform_name; we want
+# the backslashes un-doubled, and then the entire thing wrapped in single
+# quotes, because this will be expanded first by make and then by the shell.
+# Also, because we want to override the logic in subdir configure scripts to
+# choose program_transform_name, replace any s,x,x, with s,y,y,.
+sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
+${program_transform_name}
+EOF_SED
+gcc_transform_name=`cat conftestsed.out`
+rm -f conftestsed.out
+baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+if test "$silent" = yes; then
+ baseargs="$baseargs --silent"
fi
-case "$host" in
- *msdosdjgpp*)
- enable_gdbtk=no ;;
-esac
-
-copy_dirs=
-
-
-# Check whether --with-build-sysroot or --without-build-sysroot was given.
-if test "${with_build_sysroot+set}" = set; then
- withval="$with_build_sysroot"
- if test x"$withval" != x ; then
- SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
- fi
-else
- SYSROOT_CFLAGS_FOR_TARGET=
-fi;
-
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+build_configargs="--cache-file=../config.cache ${baseargs}"
-# Handle --with-headers=XXX. If the value is not "yes", the contents of
-# the named directory are copied to $(tooldir)/sys-include.
-if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
- if test x${is_cross_compiler} = xno ; then
- echo 1>&2 '***' --with-headers is only supported when cross compiling
- exit 1
- fi
- if test x"${with_headers}" != xyes ; then
- case "${exec_prefixoption}" in
- "") x=${prefix} ;;
- *) x=${exec_prefix} ;;
- esac
- copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include"
- fi
-fi
+# For host modules, accept cache file option, or specification as blank.
+case "${cache_file}" in
+"") # empty
+ cache_file_option="" ;;
+/* | [A-Za-z]:[\\/]* ) # absolute path
+ cache_file_option="--cache-file=${cache_file}" ;;
+*) # relative path
+ cache_file_option="--cache-file=../${cache_file}" ;;
+esac
-# Handle --with-libs=XXX. If the value is not "yes", the contents of
-# the name directories are copied to $(tooldir)/lib. Multiple directories
-# are permitted.
-if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
- if test x${is_cross_compiler} = xno ; then
- echo 1>&2 '***' --with-libs is only supported when cross compiling
- exit 1
- fi
- if test x"${with_libs}" != xyes ; then
- # Copy the libraries in reverse order, so that files in the first named
- # library override files in subsequent libraries.
- case "${exec_prefixoption}" in
- "") x=${prefix} ;;
- *) x=${exec_prefix} ;;
- esac
- for l in ${with_libs}; do
- copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}"
- done
- fi
-fi
+# Host dirs don't like to share a cache file either, horribly enough.
+# This seems to be due to autoconf 2.5x stupidity.
+host_configargs="--cache-file=./config.cache ${extra_host_args} ${baseargs}"
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
+target_configargs=${baseargs}
-if test x${use_gnu_as} = x &&
- echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
- with_gnu_as=yes
- extra_host_args="$extra_host_args --with-gnu-as"
+# Passing a --with-cross-host argument lets the target libraries know
+# whether they are being built with a cross-compiler or being built
+# native. However, it would be better to use other mechanisms to make the
+# sorts of decisions they want to make on this basis. Please consider
+# this option to be deprecated. FIXME.
+if test x${is_cross_compiler} = xyes ; then
+ target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
fi
-if test x${use_gnu_ld} = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
- with_gnu_ld=yes
- extra_host_args="$extra_host_args --with-gnu-ld"
+# Default to --enable-multilib.
+if test x${enable_multilib} = x ; then
+ target_configargs="--enable-multilib ${target_configargs}"
fi
-# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
-# can detect this case.
-
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
- with_newlib=yes
- extra_host_args="$extra_host_args --with-newlib"
+# Pass --with-newlib if appropriate. Note that target_configdirs has
+# changed from the earlier setting of with_newlib.
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
+ target_configargs="--with-newlib ${target_configargs}"
fi
-# Handle ${copy_dirs}
-set fnord ${copy_dirs}
-shift
-while test $# != 0 ; do
- if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
- :
- else
- echo Copying $1 to $2
-
- # Use the install script to create the directory and all required
- # parent directories.
- if test -d $2 ; then
- :
- else
- echo >config.temp
- ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
- fi
-
- # Copy the directory, assuming we have tar.
- # FIXME: Should we use B in the second tar? Not all systems support it.
- (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+# Different target subdirs use different values of certain variables
+# (notably CXX). Worse, multilibs use *lots* of different values.
+# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
+# it doesn't automatically accept command-line overrides of them.
+# This means it's not safe for target subdirs to share a cache file,
+# which is disgusting, but there you have it. Hopefully this can be
+# fixed in future. It's still worthwhile to use a cache file for each
+# directory. I think.
- # It is the responsibility of the user to correctly adjust all
- # symlinks. If somebody can figure out how to handle them correctly
- # here, feel free to add the code.
+# Pass the appropriate --build, --host, --target and --cache-file arguments.
+# We need to pass --target, as newer autoconf's requires consistency
+# for target_alias and gcc doesn't manage it consistently.
+target_configargs="--cache-file=./config.cache ${target_configargs}"
- echo $1 > $2/COPIED
- fi
- shift; shift
-done
+FLAGS_FOR_TARGET=
+case " $target_configdirs " in
+ *" newlib "*)
+ case " $target_configargs " in
+ *" --with-newlib "*)
+ case "$target" in
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
+ esac
-# Determine a target-dependent exec_prefix that the installed
-# gcc will search in. Keep this list sorted by triplet, with
-# the *-*-osname triplets last.
-md_exec_prefix=
-case "${target}" in
- alpha*-*-*vms*)
- md_exec_prefix=/gnu/lib/gcc-lib
- ;;
- i3456786-pc-msdosdjgpp*)
- md_exec_prefix=/dev/env/DJDIR/bin
- ;;
- i3456786-*-sco3.2v5*)
- if test $with_gnu_as = yes; then
- md_exec_prefix=/usr/gnu/bin
- else
- md_exec_prefix=/usr/ccs/bin/elf
- fi
- ;;
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${srcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
- mn10300-*-* | \
- powerpc-*-chorusos* | \
- powerpc*-*-eabi* | \
- powerpc*-*-sysv* | \
- powerpc*-*-kaos* | \
- s390x-ibm-tpf*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- sparc64-*-elf*)
- ;;
- v850*-*-*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- xtensa-*-elf*)
- ;;
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
- *-*-beos* | \
- *-*-elf* | \
- *-*-hpux* | \
- *-*-netware* | \
- *-*-nto-qnx* | \
- *-*-rtems* | \
- *-*-solaris2* | \
- *-*-sysv45* | \
- *-*-vxworks* | \
- *-wrs-windiss)
- md_exec_prefix=/usr/ccs/bin
- ;;
-esac
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
+ fi
-extra_arflags_for_target=
-extra_nmflags_for_target=
-extra_ranlibflags_for_target=
-target_makefile_frag=/dev/null
-case "${target}" in
- mep*-*-*)
- target_makefile_frag="config/mt-mep"
- ;;
- spu-*-*)
- target_makefile_frag="config/mt-spu"
- ;;
- *-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
- target_makefile_frag="config/mt-gnu"
- ;;
- *-*-aix4.[3456789]* | *-*-aix[56789].*)
- # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
- # commands to handle both 32-bit and 64-bit objects. These flags are
- # harmless if we're using GNU nm or ar.
- extra_arflags_for_target=" -X32_64"
- extra_nmflags_for_target=" -B -X32_64"
- ;;
- *-*-darwin*)
- # ranlib from Darwin requires the -c flag to look at common symbols.
- extra_ranlibflags_for_target=" -c"
- ;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="config/mt-wince"
- ;;
-esac
+ case "${target}-${is_cross_compiler}" in
+ i[3456789]86-*-linux*-no)
+ # Here host == target, so we don't need to build gcc,
+ # so we don't want to discard standard headers.
+ FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+ ;;
+ *)
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
-alphaieee_frag=/dev/null
-case $target in
- alpha*-*-*)
- # This just makes sure to use the -mieee option to build target libs.
- # This should probably be set individually by each library.
- alphaieee_frag="config/mt-alphaieee"
- ;;
+ # If we're building libgloss, find the startup file, simulator library
+ # and linker script.
+ case " $target_configdirs " in
+ *" libgloss "*)
+ # Look for startup file, simulator library and maybe linker script.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/'"$libgloss_dir"
+ # Look for libnosys.a in case the target needs it.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+ # Most targets have the linker script in the source directory.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$s/libgloss/'"$libgloss_dir"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
esac
-
-# If --enable-target-optspace always use -Os instead of -O2 to build
-# the target libraries, similarly if it is not specified, use -Os
-# on selected platforms.
-ospace_frag=/dev/null
-case "${enable_target_optspace}:${target}" in
- yes:*)
- ospace_frag="config/mt-ospace"
- ;;
- :d30v-*)
- ospace_frag="config/mt-d30v"
- ;;
- :m32r-* | :d10v-* | :fr30-*)
- ospace_frag="config/mt-ospace"
- ;;
- no:* | :*)
- ;;
- *)
- echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
- ;;
+case "$target" in
+*-mingw*)
+ # Can't be handled as Cygwin above since Mingw does not use newlib.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;;
esac
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
- case "${target}" in
- mips*-*-irix[56]*)
- ;;
- mips*-*-* | alpha*-*-osf*)
- with_stabs=yes;
- extra_host_args="${extra_host_args} --with-stabs"
- ;;
- esac
+# Allow the user to override the flags for
+# our build compiler if desired.
+if test x"${build}" = x"${host}" ; then
+ CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+ CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}}
+ LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}}
fi
-# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
-# them automatically.
-case "${host}" in
- hppa*64*-*-hpux11*)
- extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
+ # Search for pre-installed headers if nothing else fits.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
+fi
+
+if test "x${use_gnu_ld}" = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null ; then
+ # Arrange for us to find uninstalled linker scripts.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
+fi
+
+# Search for other target-specific linker scripts and such.
+case "${target}" in
+ mep*)
+ FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary"
;;
esac
-# Some systems (e.g., one of the i386-aix systems the gas testers are
-# using) don't handle "\$" correctly, so don't use it here.
-tooldir='${exec_prefix}'/${target_noncanonical}
-build_tooldir=${tooldir}
+# Makefile fragments.
+for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+do
+ eval fragval=\$$frag
+ if test $fragval != /dev/null; then
+ eval $frag=${srcdir}/$fragval
+ fi
+done
-# Create a .gdbinit file which runs the one in srcdir
-# and tells GDB to look there for source files.
-if test -r ${srcdir}/.gdbinit ; then
- case ${srcdir} in
- .) ;;
- *) cat > ./.gdbinit <<EOF
-# ${NO_EDIT}
-dir ${srcdir}
-dir .
-source ${srcdir}/.gdbinit
-EOF
- ;;
- esac
-fi
-# Make sure that the compiler is able to generate an executable. If it
-# can't, we are probably in trouble. We don't care whether we can run the
-# executable--we might be using a cross compiler--we only care whether it
-# can be created. At this point the main configure script has set CC.
-we_are_ok=no
-echo "int main () { return 0; }" > conftest.c
-${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
-if test $? = 0 ; then
- if test -s conftest || test -s conftest.exe ; then
- we_are_ok=yes
- fi
-fi
-case $we_are_ok in
- no)
- echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
- echo 1>&2 "*** You must set the environment variable CC to a working compiler."
- rm -f conftest*
- exit 1
- ;;
-esac
-rm -f conftest*
-# The Solaris /usr/ucb/cc compiler does not appear to work.
-case "${host}" in
- sparc-sun-solaris2*)
- CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
- could_use=
- test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
- if test -d /opt/cygnus/bin ; then
- if test "$could_use" = "" ; then
- could_use="/opt/cygnus/bin"
- else
- could_use="$could_use or /opt/cygnus/bin"
- fi
- fi
- if test "$could_use" = "" ; then
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc. You should change your PATH or CC "
- echo "variable and rerun configure."
- else
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc, when you should use the C compiler from"
- echo "$could_use. You should change your"
- echo "PATH or CC variable and rerun configure."
- fi
- fi
- ;;
-esac
-case "${host}" in
- *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
- *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
-esac
+# Miscellanea: directories, flags, etc.
-# Record target_configdirs and the configure arguments for target and
-# build configuration in Makefile.
-target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
-build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
-# Determine whether gdb needs tk/tcl or not.
-# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
-# and in that case we want gdb to be built without tk. Ugh!
-# In fact I believe gdb is the *only* package directly dependent on tk,
-# so we should be able to put the 'maybe's in unconditionally and
-# leave out the maybe dependencies when enable_gdbtk is false. I'm not
-# 100% sure that that's safe though.
-gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
-case "$enable_gdbtk" in
- no)
- GDB_TK="" ;;
- yes)
- GDB_TK="${gdb_tk}" ;;
- *)
- # Only add the dependency on gdbtk when GDBtk is part of the gdb
- # distro. Eventually someone will fix this and move Insight, nee
- # gdbtk to a separate directory.
- if test -d ${srcdir}/gdb/gdbtk ; then
- GDB_TK="${gdb_tk}"
- else
- GDB_TK=""
- fi
- ;;
-esac
-CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
-INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
-# Strip out unwanted targets.
-# While at that, we remove Makefiles if we were started for recursive
-# configuration, so that the top-level Makefile reconfigures them,
-# like we used to do when configure itself was recursive.
-# Loop over modules. $extrasub must be used with care, limiting as
-# much as possible the usage of range addresses. That's because autoconf
-# splits the sed script to overcome limits in the number of commands,
-# and relying on carefully-timed sed passes may turn out to be very hard
-# to maintain later. In this particular case, you just have to be careful
-# not to nest @if/@endif pairs, because configure will not warn you at all.
-# Check whether --enable-bootstrap or --disable-bootstrap was given.
-if test "${enable_bootstrap+set}" = set; then
- enableval="$enable_bootstrap"
+# Build module lists & subconfigure args.
+
+
+
+# Host module lists & subconfigure args.
+
+
+
+# Target module lists & subconfigure args.
+
+
+
+# Build tools.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+
+for ac_prog in 'bison -y' byacc yacc
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_YACC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_YACC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+YACC=$ac_cv_prog_YACC
+if test -n "$YACC"; then
+ echo "$as_me:$LINENO: result: $YACC" >&5
+echo "${ECHO_T}$YACC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="$MISSING bison -y"
+
+case " $build_configdirs " in
+ *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+ *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
+esac
+
+for ac_prog in bison
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_BISON+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_BISON="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+BISON=$ac_cv_prog_BISON
+if test -n "$BISON"; then
+ echo "$as_me:$LINENO: result: $BISON" >&5
+echo "${ECHO_T}$BISON" >&6
else
- enable_bootstrap=default
-fi;
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-# Issue errors and warnings for invalid/strange bootstrap combinations.
-case "$configdirs" in
- *gcc*) have_compiler=yes ;;
- *) have_compiler=no ;;
+ test -n "$BISON" && break
+done
+test -n "$BISON" || BISON="$MISSING bison"
+
+case " $build_configdirs " in
+ *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
esac
-case "$have_compiler:$host:$target:$enable_bootstrap" in
- *:*:*:no) ;;
+for ac_prog in gm4 gnum4 m4
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_M4+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$M4"; then
+ ac_cv_prog_M4="$M4" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_M4="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
- # Default behavior. Enable bootstrap if we have a compiler
- # and we are in a native configuration.
- yes:$build:$build:default)
- enable_bootstrap=yes ;;
+fi
+fi
+M4=$ac_cv_prog_M4
+if test -n "$M4"; then
+ echo "$as_me:$LINENO: result: $M4" >&5
+echo "${ECHO_T}$M4" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
- *:*:*:default)
- enable_bootstrap=no ;;
+ test -n "$M4" && break
+done
+test -n "$M4" || M4="$MISSING m4"
- # We have a compiler and we are in a native configuration, bootstrap is ok
- yes:$build:$build:yes)
- ;;
+case " $build_configdirs " in
+ *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
- # Other configurations, but we have a compiler. Assume the user knows
- # what he's doing.
- yes:*:*:yes)
- { echo "$as_me:$LINENO: WARNING: trying to bootstrap a cross compiler" >&5
-echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
- ;;
+for ac_prog in flex lex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LEX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LEX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
- # No compiler: if they passed --enable-bootstrap explicitly, fail
- no:*:*:yes)
- { { echo "$as_me:$LINENO: error: cannot bootstrap without a compiler" >&5
-echo "$as_me: error: cannot bootstrap without a compiler" >&2;}
- { (exit 1); exit 1; }; } ;;
+fi
+fi
+LEX=$ac_cv_prog_LEX
+if test -n "$LEX"; then
+ echo "$as_me:$LINENO: result: $LEX" >&5
+echo "${ECHO_T}$LEX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
- # Fail if wrong command line
- *)
- { { echo "$as_me:$LINENO: error: invalid option for --enable-bootstrap" >&5
-echo "$as_me: error: invalid option for --enable-bootstrap" >&2;}
- { (exit 1); exit 1; }; }
- ;;
-esac
+ test -n "$LEX" && break
+done
+test -n "$LEX" || LEX="$MISSING flex"
-# Adjust the toplevel makefile according to whether bootstrap was selected.
-case "$enable_bootstrap" in
- yes)
- bootstrap_suffix=bootstrap ;;
- no)
- bootstrap_suffix=no-bootstrap ;;
+case " $build_configdirs " in
+ *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+ *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
esac
-for module in ${build_configdirs} ; do
- if test -z "${no_recursion}" \
- && test -f ${build_subdir}/${module}/Makefile; then
- echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
- rm -f ${build_subdir}/${module}/Makefile
+for ac_prog in flex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_FLEX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_FLEX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- extrasub="$extrasub
-/^@if build-$module\$/d
-/^@endif build-$module\$/d
-/^@if build-$module-$bootstrap_suffix\$/d
-/^@endif build-$module-$bootstrap_suffix\$/d"
done
-for module in ${configdirs} ; do
- if test -z "${no_recursion}"; then
- for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
- if test -f ${file}; then
- echo 1>&2 "*** removing ${file} to force reconfigure"
- rm -f ${file}
- fi
- done
+done
+
+fi
+fi
+FLEX=$ac_cv_prog_FLEX
+if test -n "$FLEX"; then
+ echo "$as_me:$LINENO: result: $FLEX" >&5
+echo "${ECHO_T}$FLEX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+case " $build_configdirs " in
+ *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+for ac_prog in makeinfo
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_MAKEINFO+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MAKEINFO="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- extrasub="$extrasub
-/^@if $module\$/d
-/^@endif $module\$/d
-/^@if $module-$bootstrap_suffix\$/d
-/^@endif $module-$bootstrap_suffix\$/d"
done
-for module in ${target_configdirs} ; do
- if test -z "${no_recursion}" \
- && test -f ${target_subdir}/${module}/Makefile; then
- echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
- rm -f ${target_subdir}/${module}/Makefile
- fi
- extrasub="$extrasub
-/^@if target-$module\$/d
-/^@endif target-$module\$/d
-/^@if target-$module-$bootstrap_suffix\$/d
-/^@endif target-$module-$bootstrap_suffix\$/d"
done
-extrasub="$extrasub
-/^@if /,/^@endif /d"
-
-# Create the serialization dependencies. This uses a temporary file.
+fi
+fi
+MAKEINFO=$ac_cv_prog_MAKEINFO
+if test -n "$MAKEINFO"; then
+ echo "$as_me:$LINENO: result: $MAKEINFO" >&5
+echo "${ECHO_T}$MAKEINFO" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-# Check whether --enable-serial-configure or --disable-serial-configure was given.
-if test "${enable_serial_configure+set}" = set; then
- enableval="$enable_serial_configure"
+ test -n "$MAKEINFO" && break
+done
+test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
-fi;
+case " $build_configdirs " in
+ *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+ *)
-case ${enable_serial_configure} in
- yes)
- enable_serial_build_configure=yes
- enable_serial_host_configure=yes
- enable_serial_target_configure=yes
+ # For an installed makeinfo, we require it to be from texinfo 4.7 or
+ # higher, else we use the "missing" dummy.
+ if ${MAKEINFO} --version \
+ | egrep 'texinfo[^0-9]*(4\.([7-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
+ :
+ else
+ MAKEINFO="$MISSING makeinfo"
+ fi
;;
-esac
-# These force 'configure's to be done one at a time, to avoid problems
-# with contention over a shared config.cache.
-rm -f serdep.tmp
-echo '# serdep.tmp' > serdep.tmp
-olditem=
-test "x${enable_serial_build_configure}" = xyes &&
-for item in ${build_configdirs} ; do
- case ${olditem} in
- "") ;;
- *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
- esac
- olditem=${item}
-done
-olditem=
-test "x${enable_serial_host_configure}" = xyes &&
-for item in ${configdirs} ; do
- case ${olditem} in
- "") ;;
- *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
- esac
- olditem=${item}
-done
-olditem=
-test "x${enable_serial_target_configure}" = xyes &&
-for item in ${target_configdirs} ; do
- case ${olditem} in
- "") ;;
- *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
- esac
- olditem=${item}
-done
-serialization_dependencies=serdep.tmp
+esac
+# FIXME: expect and dejagnu may become build tools?
-# Base args. Strip norecursion, cache-file, srcdir, host, build,
-# target, nonopt, and variable assignments. These are the ones we
-# might not want to pass down to subconfigures. Also strip
-# program-prefix, program-suffix, and program-transform-name, so that
-# we can pass down a consistent program-transform-name.
-baseargs=
-keep_next=no
-skip_next=no
-eval "set -- $ac_configure_args"
-for ac_arg; do
- if test X"$skip_next" = X"yes"; then
- skip_next=no
- continue
- fi
- if test X"$keep_next" = X"yes"; then
- case $ac_arg in
- *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- baseargs="$baseargs '$ac_arg'"
- keep_next=no
- continue
+for ac_prog in expect
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_EXPECT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$EXPECT"; then
+ ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_EXPECT="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
-
- # Handle separated arguments. Based on the logic generated by
- # autoconf 2.59.
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- separate_arg=no
- ;;
- -*)
- separate_arg=yes
- ;;
- *)
- separate_arg=no
- ;;
- esac
-
- case "$ac_arg" in
- --no*)
- continue
- ;;
- --c* | \
- --sr* | \
- --ho* | \
- --bu* | \
- --t* | \
- --program-* | \
- -cache_file* | \
- -srcdir* | \
- -host* | \
- -build* | \
- -target* | \
- -program-prefix* | \
- -program-suffix* | \
- -program-transform-name* )
- skip_next=$separate_arg
- continue
- ;;
- -*)
- # An option. Add it.
- case $ac_arg in
- *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- baseargs="$baseargs '$ac_arg'"
- keep_next=$separate_arg
- ;;
- *)
- # Either a variable assignment, or a nonopt (triplet). Don't
- # pass it down; let the Makefile handle this.
- continue
- ;;
- esac
done
-# Remove the initial space we just introduced and, as these will be
-# expanded by make, quote '$'.
-baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+done
-# Add in --program-transform-name, after --program-prefix and
-# --program-suffix have been applied to it. Autoconf has already
-# doubled dollar signs and backslashes in program_transform_name; we want
-# the backslashes un-doubled, and then the entire thing wrapped in single
-# quotes, because this will be expanded first by make and then by the shell.
-# Also, because we want to override the logic in subdir configure scripts to
-# choose program_transform_name, replace any s,x,x, with s,y,y,.
-sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
-${program_transform_name}
-EOF_SED
-gcc_transform_name=`cat conftestsed.out`
-rm -f conftestsed.out
-baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+fi
+fi
+EXPECT=$ac_cv_prog_EXPECT
+if test -n "$EXPECT"; then
+ echo "$as_me:$LINENO: result: $EXPECT" >&5
+echo "${ECHO_T}$EXPECT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-# For the build-side libraries, we just need to pretend we're native,
-# and not use the same cache file. Multilibs are neither needed nor
-# desired.
-build_configargs="--cache-file=../config.cache ${baseargs}"
+ test -n "$EXPECT" && break
+done
+test -n "$EXPECT" || EXPECT="expect"
-# For host modules, accept cache file option, or specification as blank.
-case "${cache_file}" in
-"") # empty
- cache_file_option="" ;;
-/* | [A-Za-z]:[\\/]* ) # absolute path
- cache_file_option="--cache-file=${cache_file}" ;;
-*) # relative path
- cache_file_option="--cache-file=../${cache_file}" ;;
+case " $configdirs " in
+ *" expect "*)
+ test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+ ;;
esac
-# Host dirs don't like to share a cache file either, horribly enough.
-# This seems to be due to autoconf 2.5x stupidity.
-host_configargs="--cache-file=./config.cache ${extra_host_args} ${baseargs}"
-
-target_configargs=${baseargs}
+for ac_prog in runtest
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RUNTEST+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RUNTEST"; then
+ ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RUNTEST="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-# Passing a --with-cross-host argument lets the target libraries know
-# whether they are being built with a cross-compiler or being built
-# native. However, it would be better to use other mechanisms to make the
-# sorts of decisions they want to make on this basis. Please consider
-# this option to be deprecated. FIXME.
-if test x${is_cross_compiler} = xyes ; then
- target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
fi
-
-# Default to --enable-multilib.
-if test x${enable_multilib} = x ; then
- target_configargs="--enable-multilib ${target_configargs}"
fi
-
-# Pass --with-newlib if appropriate. Note that target_configdirs has
-# changed from the earlier setting of with_newlib.
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
- target_configargs="--with-newlib ${target_configargs}"
+RUNTEST=$ac_cv_prog_RUNTEST
+if test -n "$RUNTEST"; then
+ echo "$as_me:$LINENO: result: $RUNTEST" >&5
+echo "${ECHO_T}$RUNTEST" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-# Different target subdirs use different values of certain variables
-# (notably CXX). Worse, multilibs use *lots* of different values.
-# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
-# it doesn't automatically accept command-line overrides of them.
-# This means it's not safe for target subdirs to share a cache file,
-# which is disgusting, but there you have it. Hopefully this can be
-# fixed in future. It's still worthwhile to use a cache file for each
-# directory. I think.
+ test -n "$RUNTEST" && break
+done
+test -n "$RUNTEST" || RUNTEST="runtest"
-# Pass the appropriate --build, --host, --target and --cache-file arguments.
-# We need to pass --target, as newer autoconf's requires consistency
-# for target_alias and gcc doesn't manage it consistently.
-target_configargs="--cache-file=./config.cache ${target_configargs}"
+case " $configdirs " in
+ *" dejagnu "*)
+ test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
+ ;;
+esac
-FLAGS_FOR_TARGET=
-case " $target_configdirs " in
- *" newlib "*)
- case " $target_configargs " in
- *" --with-newlib "*)
- case "$target" in
- *-cygwin*)
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
- esac
- # If we're not building GCC, don't discard standard headers.
- if test -d ${srcdir}/gcc; then
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
- if test "${build}" != "${host}"; then
- # On Canadian crosses, CC_FOR_TARGET will have already been set
- # by `configure', so we won't have an opportunity to add -Bgcc/
- # to it. This is right: we don't want to search that directory
- # for binaries, but we want the header files in there, so add
- # them explicitly.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
- # Someone might think of using the pre-installed headers on
- # Canadian crosses, in case the installed compiler is not fully
- # compatible with the compiler being built. In this case, it
- # would be better to flag an error than risking having
- # incompatible object files being constructed. We can't
- # guarantee that an error will be flagged, but let's hope the
- # compiler will do it, when presented with incompatible header
- # files.
- fi
- fi
- case "${target}-${is_cross_compiler}" in
- i[3456789]86-*-linux*-no)
- # Here host == target, so we don't need to build gcc,
- # so we don't want to discard standard headers.
- FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
- ;;
- *)
- # If we're building newlib, use its generic headers last, but search
- # for any libc-related directories first (so make it the last -B
- # switch).
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
- ;;
- esac
- ;;
- esac
- ;;
-esac
-case "$target" in
-*-mingw*)
- # Can't be handled as Cygwin above since Mingw does not use newlib.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;;
-esac
+if test -n "$AR"; then
+ ac_cv_prog_AR=$AR
+elif test -n "$ac_cv_prog_AR"; then
+ AR=$ac_cv_prog_AR
+fi
-# Allow the user to override the flags for
-# our build compiler if desired.
-CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+if test -n "$ac_cv_prog_AR"; then
+ for ncn_progname in ar; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-# On Canadian crosses, we'll be searching the right directories for
-# the previously-installed cross compiler, so don't bother to add
-# flags for directories within the install tree of the compiler
-# being built; programs in there won't even run.
-if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
- # Search for pre-installed headers if nothing else fits.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
fi
-
-if test "x${use_gnu_ld}" = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null ; then
- # Arrange for us to find uninstalled linker scripts.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-# Search for other target-specific linker scripts and such.
-case "${target}" in
- m32c-*-* )
- if test -d ${srcdir}/libgloss/m32c; then
- # This is for crt0.o
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c'
- # This is for r8c.ld
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c'
- # This is for libnosys.a
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
- fi
- ;;
- mep*)
- FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary"
- ;;
-esac
+ done
+fi
-# Makefile fragments.
-for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+for ncn_progname in ar; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
do
- eval fragval=\$$frag
- if test $fragval != /dev/null; then
- eval $frag=${srcdir}/$fragval
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ fi
+ if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ fi
+ test -n "$ac_cv_prog_AR" && break
+done
+if test -z "$ac_cv_prog_AR" ; then
+ set dummy ar
+ if test $build = $host ; then
+ AR="$2"
+ else
+ AR="${ncn_tool_prefix}$2"
+ fi
+fi
-# Miscellanea: directories, flags, etc.
+if test -n "$AS"; then
+ ac_cv_prog_AS=$AS
+elif test -n "$ac_cv_prog_AS"; then
+ AS=$ac_cv_prog_AS
+fi
+if test -n "$ac_cv_prog_AS"; then
+ for ncn_progname in as; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ done
+fi
+for ncn_progname in as; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-# Build module lists & subconfigure args.
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ fi
+ if test -z "$ac_cv_prog_AS" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-# Host module lists & subconfigure args.
+ fi
+ test -n "$ac_cv_prog_AS" && break
+done
+if test -z "$ac_cv_prog_AS" ; then
+ set dummy as
+ if test $build = $host ; then
+ AS="$2"
+ else
+ AS="${ncn_tool_prefix}$2"
+ fi
+fi
-# Target module lists & subconfigure args.
+if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL=$DLLTOOL
+elif test -n "$ac_cv_prog_DLLTOOL"; then
+ DLLTOOL=$ac_cv_prog_DLLTOOL
+fi
+if test -n "$ac_cv_prog_DLLTOOL"; then
+ for ncn_progname in dlltool; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-# Build tools.
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ done
+fi
+for ncn_progname in dlltool; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-# Generate default definitions for YACC, M4, LEX and other programs that run
-# on the build machine. These are used if the Makefile can't locate these
-# programs in objdir.
-MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-for ac_prog in 'bison -y' byacc yacc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_YACC+set}" = set; then
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$YACC"; then
- ac_cv_prog_YACC="$YACC" # Let the user override the test.
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_YACC="$ac_prog"
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-YACC=$ac_cv_prog_YACC
-if test -n "$YACC"; then
- echo "$as_me:$LINENO: result: $YACC" >&5
-echo "${ECHO_T}$YACC" >&6
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$YACC" && break
+ fi
+ test -n "$ac_cv_prog_DLLTOOL" && break
done
-test -n "$YACC" || YACC="$MISSING bison -y"
-case " $build_configdirs " in
- *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
- *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
-esac
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+ set dummy dlltool
+ if test $build = $host ; then
+ DLLTOOL="$2"
+ else
+ DLLTOOL="${ncn_tool_prefix}$2"
+ fi
+fi
-for ac_prog in bison
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+
+
+if test -n "$LD"; then
+ ac_cv_prog_LD=$LD
+elif test -n "$ac_cv_prog_LD"; then
+ LD=$ac_cv_prog_LD
+fi
+
+if test -n "$ac_cv_prog_LD"; then
+ for ncn_progname in ld; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_BISON+set}" = set; then
+if test "${ac_cv_prog_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$BISON"; then
- ac_cv_prog_BISON="$BISON" # Let the user override the test.
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_BISON="$ac_prog"
+ ac_cv_prog_LD="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-BISON=$ac_cv_prog_BISON
-if test -n "$BISON"; then
- echo "$as_me:$LINENO: result: $BISON" >&5
-echo "${ECHO_T}$BISON" >&6
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$BISON" && break
-done
-test -n "$BISON" || BISON="$MISSING bison"
-
-case " $build_configdirs " in
- *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
-esac
+ done
+fi
-for ac_prog in gm4 gnum4 m4
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+for ncn_progname in ld; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_M4+set}" = set; then
+if test "${ac_cv_prog_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$M4"; then
- ac_cv_prog_M4="$M4" # Let the user override the test.
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_M4="$ac_prog"
+ ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-M4=$ac_cv_prog_M4
-if test -n "$M4"; then
- echo "$as_me:$LINENO: result: $M4" >&5
-echo "${ECHO_T}$M4" >&6
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$M4" && break
-done
-test -n "$M4" || M4="$MISSING m4"
-
-case " $build_configdirs " in
- *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
-esac
-
-for ac_prog in flex lex
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_LEX+set}" = set; then
+if test "${ac_cv_prog_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$LEX"; then
- ac_cv_prog_LEX="$LEX" # Let the user override the test.
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LEX="$ac_prog"
+ ac_cv_prog_LD="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-LEX=$ac_cv_prog_LEX
-if test -n "$LEX"; then
- echo "$as_me:$LINENO: result: $LEX" >&5
-echo "${ECHO_T}$LEX" >&6
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$LEX" && break
+ fi
+ test -n "$ac_cv_prog_LD" && break
done
-test -n "$LEX" || LEX="$MISSING flex"
-case " $build_configdirs " in
- *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
- *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
-esac
+if test -z "$ac_cv_prog_LD" ; then
+ set dummy ld
+ if test $build = $host ; then
+ LD="$2"
+ else
+ LD="${ncn_tool_prefix}$2"
+ fi
+fi
-for ac_prog in flex
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+
+
+if test -n "$LIPO"; then
+ ac_cv_prog_LIPO=$LIPO
+elif test -n "$ac_cv_prog_LIPO"; then
+ LIPO=$ac_cv_prog_LIPO
+fi
+
+if test -n "$ac_cv_prog_LIPO"; then
+ for ncn_progname in lipo; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_FLEX+set}" = set; then
+if test "${ac_cv_prog_LIPO+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$FLEX"; then
- ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_FLEX="$ac_prog"
+ ac_cv_prog_LIPO="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-FLEX=$ac_cv_prog_FLEX
-if test -n "$FLEX"; then
- echo "$as_me:$LINENO: result: $FLEX" >&5
-echo "${ECHO_T}$FLEX" >&6
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ echo "$as_me:$LINENO: result: $LIPO" >&5
+echo "${ECHO_T}$LIPO" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$FLEX" && break
-done
-test -n "$FLEX" || FLEX="$MISSING flex"
-
-case " $build_configdirs " in
- *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
-esac
+ done
+fi
-for ac_prog in makeinfo
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+for ncn_progname in lipo; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_MAKEINFO+set}" = set; then
+if test "${ac_cv_prog_LIPO+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$MAKEINFO"; then
- ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_MAKEINFO="$ac_prog"
+ ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-MAKEINFO=$ac_cv_prog_MAKEINFO
-if test -n "$MAKEINFO"; then
- echo "$as_me:$LINENO: result: $MAKEINFO" >&5
-echo "${ECHO_T}$MAKEINFO" >&6
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ echo "$as_me:$LINENO: result: $LIPO" >&5
+echo "${ECHO_T}$LIPO" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$MAKEINFO" && break
-done
-test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
-
-case " $build_configdirs " in
- *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
- *)
-
- # For an installed makeinfo, we require it to be from texinfo 4.4 or
- # higher, else we use the "missing" dummy.
- if ${MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
- :
- else
- MAKEINFO="$MISSING makeinfo"
- fi
- ;;
-
-esac
-
-# FIXME: expect and dejagnu may become build tools?
-
-for ac_prog in expect
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_LIPO" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_EXPECT+set}" = set; then
+if test "${ac_cv_prog_LIPO+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$EXPECT"; then
- ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test.
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_EXPECT="$ac_prog"
+ ac_cv_prog_LIPO="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-EXPECT=$ac_cv_prog_EXPECT
-if test -n "$EXPECT"; then
- echo "$as_me:$LINENO: result: $EXPECT" >&5
-echo "${ECHO_T}$EXPECT" >&6
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ echo "$as_me:$LINENO: result: $LIPO" >&5
+echo "${ECHO_T}$LIPO" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$EXPECT" && break
+ fi
+ test -n "$ac_cv_prog_LIPO" && break
done
-test -n "$EXPECT" || EXPECT="expect"
-case " $configdirs " in
- *" expect "*)
- test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
- ;;
-esac
+if test -z "$ac_cv_prog_LIPO" ; then
+ set dummy lipo
+ if test $build = $host ; then
+ LIPO="$2"
+ else
+ LIPO="${ncn_tool_prefix}$2"
+ fi
+fi
-for ac_prog in runtest
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+
+
+if test -n "$NM"; then
+ ac_cv_prog_NM=$NM
+elif test -n "$ac_cv_prog_NM"; then
+ NM=$ac_cv_prog_NM
+fi
+
+if test -n "$ac_cv_prog_NM"; then
+ for ncn_progname in nm; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RUNTEST+set}" = set; then
+if test "${ac_cv_prog_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$RUNTEST"; then
- ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test.
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RUNTEST="$ac_prog"
+ ac_cv_prog_NM="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-RUNTEST=$ac_cv_prog_RUNTEST
-if test -n "$RUNTEST"; then
- echo "$as_me:$LINENO: result: $RUNTEST" >&5
-echo "${ECHO_T}$RUNTEST" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$RUNTEST" && break
-done
-test -n "$RUNTEST" || RUNTEST="runtest"
-
-case " $configdirs " in
- *" dejagnu "*)
- test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
- ;;
-esac
-
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-# Host tools.
-ncn_tool_prefix=
-test -n "$host_alias" && ncn_tool_prefix=$host_alias-
-ncn_target_tool_prefix=
-test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+ done
+fi
- for ncn_progname in ar; do
+for ncn_progname in nm; do
if test -n "$ncn_tool_prefix"; then
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AR+set}" = set; then
+if test "${ac_cv_prog_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+ ac_cv_prog_NM="${ncn_tool_prefix}${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+ if test -z "$ac_cv_prog_NM" && test $build = $host ; then
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AR+set}" = set; then
+if test "${ac_cv_prog_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="${ncn_progname}"
+ ac_cv_prog_NM="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- test -n "$ac_cv_prog_AR" && break
+ test -n "$ac_cv_prog_NM" && break
done
-if test -z "$ac_cv_prog_AR" ; then
- set dummy ar
+if test -z "$ac_cv_prog_NM" ; then
+ set dummy nm
if test $build = $host ; then
- AR="$2"
+ NM="$2"
else
- AR="${ncn_tool_prefix}$2"
+ NM="${ncn_tool_prefix}$2"
fi
fi
- for ncn_progname in as; do
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+
+
+if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB=$RANLIB
+elif test -n "$ac_cv_prog_RANLIB"; then
+ RANLIB=$ac_cv_prog_RANLIB
+fi
+
+if test -n "$ac_cv_prog_RANLIB"; then
+ for ncn_progname in ranlib; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AS+set}" = set; then
+if test "${ac_cv_prog_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+ ac_cv_prog_RANLIB="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
- echo "$as_me:$LINENO: result: $AS" >&5
-echo "${ECHO_T}$AS" >&6
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- fi
- if test -z "$ac_cv_prog_AS" && test $build = $host ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+ done
+fi
+
+for ncn_progname in ranlib; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AS+set}" = set; then
+if test "${ac_cv_prog_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AS="${ncn_progname}"
+ ac_cv_prog_RANLIB="${ncn_tool_prefix}${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
- echo "$as_me:$LINENO: result: $AS" >&5
-echo "${ECHO_T}$AS" >&6
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- test -n "$ac_cv_prog_AS" && break
-done
-
-if test -z "$ac_cv_prog_AS" ; then
- set dummy as
- if test $build = $host ; then
- AS="$2"
- else
- AS="${ncn_tool_prefix}$2"
- fi
-fi
-
- for ncn_progname in dlltool; do
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+ if test -z "$ac_cv_prog_RANLIB" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+if test "${ac_cv_prog_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DLLTOOL="${ncn_tool_prefix}${ncn_progname}"
+ ac_cv_prog_RANLIB="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
- echo "$as_me:$LINENO: result: $DLLTOOL" >&5
-echo "${ECHO_T}$DLLTOOL" >&6
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- if test -z "$ac_cv_prog_DLLTOOL" && test $build = $host ; then
+ test -n "$ac_cv_prog_RANLIB" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB" ; then
+ RANLIB=":"
+fi
+
+
+
+if test -n "$STRIP"; then
+ ac_cv_prog_STRIP=$STRIP
+elif test -n "$ac_cv_prog_STRIP"; then
+ STRIP=$ac_cv_prog_STRIP
+fi
+
+if test -n "$ac_cv_prog_STRIP"; then
+ for ncn_progname in strip; do
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+if test "${ac_cv_prog_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DLLTOOL="${ncn_progname}"
+ ac_cv_prog_STRIP="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
- echo "$as_me:$LINENO: result: $DLLTOOL" >&5
-echo "${ECHO_T}$DLLTOOL" >&6
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- fi
- test -n "$ac_cv_prog_DLLTOOL" && break
-done
-
-if test -z "$ac_cv_prog_DLLTOOL" ; then
- set dummy dlltool
- if test $build = $host ; then
- DLLTOOL="$2"
- else
- DLLTOOL="${ncn_tool_prefix}$2"
- fi
+ done
fi
- for ncn_progname in ld; do
+for ncn_progname in strip; do
if test -n "$ncn_tool_prefix"; then
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_LD+set}" = set; then
+if test "${ac_cv_prog_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$LD"; then
- ac_cv_prog_LD="$LD" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
+ ac_cv_prog_STRIP="${ncn_tool_prefix}${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-LD=$ac_cv_prog_LD
-if test -n "$LD"; then
- echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+ if test -z "$ac_cv_prog_STRIP" && test $build = $host ; then
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_LD+set}" = set; then
+if test "${ac_cv_prog_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$LD"; then
- ac_cv_prog_LD="$LD" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LD="${ncn_progname}"
+ ac_cv_prog_STRIP="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-LD=$ac_cv_prog_LD
-if test -n "$LD"; then
- echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- test -n "$ac_cv_prog_LD" && break
+ test -n "$ac_cv_prog_STRIP" && break
done
-if test -z "$ac_cv_prog_LD" ; then
- set dummy ld
- if test $build = $host ; then
- LD="$2"
- else
- LD="${ncn_tool_prefix}$2"
- fi
+if test -z "$ac_cv_prog_STRIP" ; then
+ STRIP=":"
fi
- for ncn_progname in lipo; do
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_LIPO+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$LIPO"; then
- ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-fi
-fi
-LIPO=$ac_cv_prog_LIPO
-if test -n "$LIPO"; then
- echo "$as_me:$LINENO: result: $LIPO" >&5
-echo "${ECHO_T}$LIPO" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+
+if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES=$WINDRES
+elif test -n "$ac_cv_prog_WINDRES"; then
+ WINDRES=$ac_cv_prog_WINDRES
fi
- fi
- if test -z "$ac_cv_prog_LIPO" && test $build = $host ; then
+if test -n "$ac_cv_prog_WINDRES"; then
+ for ncn_progname in windres; do
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_LIPO+set}" = set; then
+if test "${ac_cv_prog_WINDRES+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$LIPO"; then
- ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LIPO="${ncn_progname}"
+ ac_cv_prog_WINDRES="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-LIPO=$ac_cv_prog_LIPO
-if test -n "$LIPO"; then
- echo "$as_me:$LINENO: result: $LIPO" >&5
-echo "${ECHO_T}$LIPO" >&6
+WINDRES=$ac_cv_prog_WINDRES
+if test -n "$WINDRES"; then
+ echo "$as_me:$LINENO: result: $WINDRES" >&5
+echo "${ECHO_T}$WINDRES" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- fi
- test -n "$ac_cv_prog_LIPO" && break
-done
-
-if test -z "$ac_cv_prog_LIPO" ; then
- set dummy lipo
- if test $build = $host ; then
- LIPO="$2"
- else
- LIPO="${ncn_tool_prefix}$2"
- fi
+ done
fi
- for ncn_progname in nm; do
+for ncn_progname in windres; do
if test -n "$ncn_tool_prefix"; then
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_NM+set}" = set; then
+if test "${ac_cv_prog_WINDRES+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NM="${ncn_tool_prefix}${ncn_progname}"
+ ac_cv_prog_WINDRES="${ncn_tool_prefix}${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
- echo "$as_me:$LINENO: result: $NM" >&5
-echo "${ECHO_T}$NM" >&6
+WINDRES=$ac_cv_prog_WINDRES
+if test -n "$WINDRES"; then
+ echo "$as_me:$LINENO: result: $WINDRES" >&5
+echo "${ECHO_T}$WINDRES" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- if test -z "$ac_cv_prog_NM" && test $build = $host ; then
+ if test -z "$ac_cv_prog_WINDRES" && test $build = $host ; then
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_NM+set}" = set; then
+if test "${ac_cv_prog_WINDRES+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$NM"; then
- ac_cv_prog_NM="$NM" # Let the user override the test.
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NM="${ncn_progname}"
+ ac_cv_prog_WINDRES="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
- echo "$as_me:$LINENO: result: $NM" >&5
-echo "${ECHO_T}$NM" >&6
+WINDRES=$ac_cv_prog_WINDRES
+if test -n "$WINDRES"; then
+ echo "$as_me:$LINENO: result: $WINDRES" >&5
+echo "${ECHO_T}$WINDRES" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- test -n "$ac_cv_prog_NM" && break
+ test -n "$ac_cv_prog_WINDRES" && break
done
-if test -z "$ac_cv_prog_NM" ; then
- set dummy nm
+if test -z "$ac_cv_prog_WINDRES" ; then
+ set dummy windres
if test $build = $host ; then
- NM="$2"
+ WINDRES="$2"
else
- NM="${ncn_tool_prefix}$2"
+ WINDRES="${ncn_tool_prefix}$2"
fi
fi
- for ncn_progname in ranlib; do
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RANLIB="${ncn_tool_prefix}${ncn_progname}"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+
+if test -n "$WINDMC"; then
+ ac_cv_prog_WINDMC=$WINDMC
+elif test -n "$ac_cv_prog_WINDMC"; then
+ WINDMC=$ac_cv_prog_WINDMC
fi
- fi
- if test -z "$ac_cv_prog_RANLIB" && test $build = $host ; then
+if test -n "$ac_cv_prog_WINDMC"; then
+ for ncn_progname in windmc; do
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
+if test "${ac_cv_prog_WINDMC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ if test -n "$WINDMC"; then
+ ac_cv_prog_WINDMC="$WINDMC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RANLIB="${ncn_progname}"
+ ac_cv_prog_WINDMC="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
+WINDMC=$ac_cv_prog_WINDMC
+if test -n "$WINDMC"; then
+ echo "$as_me:$LINENO: result: $WINDMC" >&5
+echo "${ECHO_T}$WINDMC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- fi
- test -n "$ac_cv_prog_RANLIB" && break
-done
-
-if test -z "$ac_cv_prog_RANLIB" ; then
- RANLIB=":"
+ done
fi
- for ncn_progname in strip; do
+for ncn_progname in windmc; do
if test -n "$ncn_tool_prefix"; then
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if test "${ac_cv_prog_WINDMC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+ if test -n "$WINDMC"; then
+ ac_cv_prog_WINDMC="$WINDMC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ncn_tool_prefix}${ncn_progname}"
+ ac_cv_prog_WINDMC="${ncn_tool_prefix}${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+WINDMC=$ac_cv_prog_WINDMC
+if test -n "$WINDMC"; then
+ echo "$as_me:$LINENO: result: $WINDMC" >&5
+echo "${ECHO_T}$WINDMC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- if test -z "$ac_cv_prog_STRIP" && test $build = $host ; then
+ if test -z "$ac_cv_prog_WINDMC" && test $build = $host ; then
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if test "${ac_cv_prog_WINDMC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+ if test -n "$WINDMC"; then
+ ac_cv_prog_WINDMC="$WINDMC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ncn_progname}"
+ ac_cv_prog_WINDMC="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+WINDMC=$ac_cv_prog_WINDMC
+if test -n "$WINDMC"; then
+ echo "$as_me:$LINENO: result: $WINDMC" >&5
+echo "${ECHO_T}$WINDMC" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- test -n "$ac_cv_prog_STRIP" && break
+ test -n "$ac_cv_prog_WINDMC" && break
done
-if test -z "$ac_cv_prog_STRIP" ; then
- STRIP=":"
+if test -z "$ac_cv_prog_WINDMC" ; then
+ set dummy windmc
+ if test $build = $host ; then
+ WINDMC="$2"
+ else
+ WINDMC="${ncn_tool_prefix}$2"
+ fi
fi
- for ncn_progname in windres; do
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+
+
+if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY=$OBJCOPY
+elif test -n "$ac_cv_prog_OBJCOPY"; then
+ OBJCOPY=$ac_cv_prog_OBJCOPY
+fi
+
+if test -n "$ac_cv_prog_OBJCOPY"; then
+ for ncn_progname in objcopy; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_WINDRES+set}" = set; then
+if test "${ac_cv_prog_OBJCOPY+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$WINDRES"; then
- ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_WINDRES="${ncn_tool_prefix}${ncn_progname}"
+ ac_cv_prog_OBJCOPY="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-WINDRES=$ac_cv_prog_WINDRES
-if test -n "$WINDRES"; then
- echo "$as_me:$LINENO: result: $WINDRES" >&5
-echo "${ECHO_T}$WINDRES" >&6
+OBJCOPY=$ac_cv_prog_OBJCOPY
+if test -n "$OBJCOPY"; then
+ echo "$as_me:$LINENO: result: $OBJCOPY" >&5
+echo "${ECHO_T}$OBJCOPY" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- fi
- if test -z "$ac_cv_prog_WINDRES" && test $build = $host ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+ done
+fi
+
+for ncn_progname in objcopy; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_WINDRES+set}" = set; then
+if test "${ac_cv_prog_OBJCOPY+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$WINDRES"; then
- ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_WINDRES="${ncn_progname}"
+ ac_cv_prog_OBJCOPY="${ncn_tool_prefix}${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-WINDRES=$ac_cv_prog_WINDRES
-if test -n "$WINDRES"; then
- echo "$as_me:$LINENO: result: $WINDRES" >&5
-echo "${ECHO_T}$WINDRES" >&6
+OBJCOPY=$ac_cv_prog_OBJCOPY
+if test -n "$OBJCOPY"; then
+ echo "$as_me:$LINENO: result: $OBJCOPY" >&5
+echo "${ECHO_T}$OBJCOPY" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
- test -n "$ac_cv_prog_WINDRES" && break
-done
-
-if test -z "$ac_cv_prog_WINDRES" ; then
- set dummy windres
- if test $build = $host ; then
- WINDRES="$2"
- else
- WINDRES="${ncn_tool_prefix}$2"
- fi
-fi
-
- for ncn_progname in objcopy; do
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+ if test -z "$ac_cv_prog_OBJCOPY" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_OBJCOPY+set}" = set; then
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJCOPY="${ncn_tool_prefix}${ncn_progname}"
+ ac_cv_prog_OBJCOPY="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
- if test -z "$ac_cv_prog_OBJCOPY" && test $build = $host ; then
+ test -n "$ac_cv_prog_OBJCOPY" && break
+done
+
+if test -z "$ac_cv_prog_OBJCOPY" ; then
+ set dummy objcopy
+ if test $build = $host ; then
+ OBJCOPY="$2"
+ else
+ OBJCOPY="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP=$OBJDUMP
+elif test -n "$ac_cv_prog_OBJDUMP"; then
+ OBJDUMP=$ac_cv_prog_OBJDUMP
+fi
+
+if test -n "$ac_cv_prog_OBJDUMP"; then
+ for ncn_progname in objdump; do
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_OBJCOPY+set}" = set; then
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$OBJCOPY"; then
- ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJCOPY="${ncn_progname}"
+ ac_cv_prog_OBJDUMP="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-OBJCOPY=$ac_cv_prog_OBJCOPY
-if test -n "$OBJCOPY"; then
- echo "$as_me:$LINENO: result: $OBJCOPY" >&5
-echo "${ECHO_T}$OBJCOPY" >&6
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+echo "${ECHO_T}$OBJDUMP" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- fi
- test -n "$ac_cv_prog_OBJCOPY" && break
-done
-
-if test -z "$ac_cv_prog_OBJCOPY" ; then
- set dummy objcopy
- if test $build = $host ; then
- OBJCOPY="$2"
- else
- OBJCOPY="${ncn_tool_prefix}$2"
- fi
+ done
fi
- for ncn_progname in objdump; do
+for ncn_progname in objdump; do
if test -n "$ncn_tool_prefix"; then
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
-
# Target tools.
# Check whether --with-build-time-tools or --without-build-time-tools was given.
with_build_time_tools=
fi;
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET=$CC_FOR_TARGET
+elif test -n "$ac_cv_prog_CC_FOR_TARGET"; then
+ CC_FOR_TARGET=$ac_cv_prog_CC_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_CC_FOR_TARGET"; then
+ for ncn_progname in cc gcc; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC_FOR_TARGET=$ac_cv_prog_CC_FOR_TARGET
+if test -n "$CC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $CC_FOR_TARGET" >&5
+echo "${ECHO_T}$CC_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in cc gcc; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+fi
+
+
+
+if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET=$CXX_FOR_TARGET
+elif test -n "$ac_cv_prog_CXX_FOR_TARGET"; then
+ CXX_FOR_TARGET=$ac_cv_prog_CXX_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_CXX_FOR_TARGET"; then
+ for ncn_progname in c++ g++ cxx gxx; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CXX_FOR_TARGET=$ac_cv_prog_CXX_FOR_TARGET
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $CXX_FOR_TARGET" >&5
+echo "${ECHO_T}$CXX_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
fi
- if test -n "$with_build_time_tools"; then
+if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in c++ g++ cxx gxx; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+fi
+
+
+
+if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET=$GCC_FOR_TARGET
+elif test -n "$ac_cv_prog_GCC_FOR_TARGET"; then
+ GCC_FOR_TARGET=$ac_cv_prog_GCC_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_GCC_FOR_TARGET"; then
+ for ncn_progname in gcc; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GCC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+GCC_FOR_TARGET=$ac_cv_prog_GCC_FOR_TARGET
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GCC_FOR_TARGET" >&5
+echo "${ECHO_T}$GCC_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
fi
- if test -n "$with_build_time_tools"; then
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in gcc; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
GCC_FOR_TARGET="${CC_FOR_TARGET}"
+else
+ GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+fi
+
+
+
+if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET=$GCJ_FOR_TARGET
+elif test -n "$ac_cv_prog_GCJ_FOR_TARGET"; then
+ GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_GCJ_FOR_TARGET"; then
+ for ncn_progname in gcj; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GCJ_FOR_TARGET" >&5
+echo "${ECHO_T}$GCJ_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
fi
- if test -n "$with_build_time_tools"; then
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in gcj; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
echo "${ECHO_T}no" >&6
fi
- fi
- if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GCJ_FOR_TARGET" >&5
+echo "${ECHO_T}$GCJ_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ set dummy gcj
+ if test $build = $target ; then
+ GCJ_FOR_TARGET="$2"
+ else
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+fi
+
+
+
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET
+elif test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
+ GFORTRAN_FOR_TARGET=$ac_cv_prog_GFORTRAN_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
+ for ncn_progname in gfortran; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then
+if test "${ac_cv_prog_GFORTRAN_FOR_TARGET+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
- echo "$as_me:$LINENO: result: $GCJ_FOR_TARGET" >&5
-echo "${ECHO_T}$GCJ_FOR_TARGET" >&6
+GFORTRAN_FOR_TARGET=$ac_cv_prog_GFORTRAN_FOR_TARGET
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GFORTRAN_FOR_TARGET" >&5
+echo "${ECHO_T}$GFORTRAN_FOR_TARGET" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- fi
- test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
done
fi
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
- set dummy gcj
- if test $build = $target ; then
- GCJ_FOR_TARGET="$2"
- else
- GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
-fi
-
- if test -n "$with_build_time_tools"; then
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in gfortran; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-fi
-
-
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
-
-if test "x$exec_prefix" = xNONE; then
- if test "x$prefix" = xNONE; then
- gcc_cv_tool_prefix=$ac_default_prefix
- else
- gcc_cv_tool_prefix=$prefix
- fi
-else
- gcc_cv_tool_prefix=$exec_prefix
-fi
-
-# If there is no compiler in the tree, use the PATH only. In any
-# case, if there is no compiler in the tree nobody should use
-# AS_FOR_TARGET and LD_FOR_TARGET.
-if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
- gcc_version=`cat $srcdir/gcc/BASE-VER`
- gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
else
- gcc_cv_tool_dirs=
-fi
-
-if test x$build = x$target && test -n "$md_exec_prefix"; then
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+ GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
fi
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
AR_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ar`
- test $AR_FOR_TARGET=ar && AR_FOR_TARGET=
- ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
+ test $AR_FOR_TARGET = ar && AR_FOR_TARGET=
+ test -n "$AR_FOR_TARGET" && ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_AR_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET=$AR_FOR_TARGET
+elif test -n "$ac_cv_prog_AR_FOR_TARGET"; then
+ AR_FOR_TARGET=$ac_cv_prog_AR_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_AR_FOR_TARGET"; then
+ for ncn_progname in ar; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR_FOR_TARGET=$ac_cv_prog_AR_FOR_TARGET
+if test -n "$AR_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $AR_FOR_TARGET" >&5
+echo "${ECHO_T}$AR_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in ar; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
AS_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=as`
- test $AS_FOR_TARGET=as && AS_FOR_TARGET=
- ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
+ test $AS_FOR_TARGET = as && AS_FOR_TARGET=
+ test -n "$AS_FOR_TARGET" && ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_AS_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET=$AS_FOR_TARGET
+elif test -n "$ac_cv_prog_AS_FOR_TARGET"; then
+ AS_FOR_TARGET=$ac_cv_prog_AS_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_AS_FOR_TARGET"; then
+ for ncn_progname in as; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AS_FOR_TARGET=$ac_cv_prog_AS_FOR_TARGET
+if test -n "$AS_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $AS_FOR_TARGET" >&5
+echo "${ECHO_T}$AS_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in as; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
DLLTOOL_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=dlltool`
- test $DLLTOOL_FOR_TARGET=dlltool && DLLTOOL_FOR_TARGET=
- ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ test $DLLTOOL_FOR_TARGET = dlltool && DLLTOOL_FOR_TARGET=
+ test -n "$DLLTOOL_FOR_TARGET" && ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+elif test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
+ DLLTOOL_FOR_TARGET=$ac_cv_prog_DLLTOOL_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
+ for ncn_progname in dlltool; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+DLLTOOL_FOR_TARGET=$ac_cv_prog_DLLTOOL_FOR_TARGET
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL_FOR_TARGET" >&5
+echo "${ECHO_T}$DLLTOOL_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in dlltool; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
LD_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ld`
- test $LD_FOR_TARGET=ld && LD_FOR_TARGET=
- ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
+ test $LD_FOR_TARGET = ld && LD_FOR_TARGET=
+ test -n "$LD_FOR_TARGET" && ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_LD_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_LD_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $LD_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_LD_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
+
+ ;;
+esac
+fi
+LD_FOR_TARGET=$ac_cv_path_LD_FOR_TARGET
+
+if test -n "$LD_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LD_FOR_TARGET" >&5
+echo "${ECHO_T}$LD_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
fi
-if test -z "$ac_cv_path_LD_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+
+
+if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET=$LD_FOR_TARGET
+elif test -n "$ac_cv_prog_LD_FOR_TARGET"; then
+ LD_FOR_TARGET=$ac_cv_prog_LD_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_LD_FOR_TARGET"; then
+ for ncn_progname in ld; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_LD_FOR_TARGET+set}" = set; then
+if test "${ac_cv_prog_LD_FOR_TARGET+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- case $LD_FOR_TARGET in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $gcc_cv_tool_dirs
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_LD_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ ac_cv_prog_LD_FOR_TARGET="${ncn_progname}"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
- ;;
-esac
fi
-LD_FOR_TARGET=$ac_cv_path_LD_FOR_TARGET
-
+fi
+LD_FOR_TARGET=$ac_cv_prog_LD_FOR_TARGET
if test -n "$LD_FOR_TARGET"; then
echo "$as_me:$LINENO: result: $LD_FOR_TARGET" >&5
echo "${ECHO_T}$LD_FOR_TARGET" >&6
echo "${ECHO_T}no" >&6
fi
+ done
fi
-if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+if test -z "$ac_cv_prog_LD_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in ld; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
LD_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
LIPO_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=lipo`
- test $LIPO_FOR_TARGET=lipo && LIPO_FOR_TARGET=
- ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ test $LIPO_FOR_TARGET = lipo && LIPO_FOR_TARGET=
+ test -n "$LIPO_FOR_TARGET" && ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_LIPO_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+elif test -n "$ac_cv_prog_LIPO_FOR_TARGET"; then
+ LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_LIPO_FOR_TARGET"; then
+ for ncn_progname in lipo; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LIPO_FOR_TARGET" >&5
+echo "${ECHO_T}$LIPO_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in lipo; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
LIPO_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ LIPO_FOR_TARGET="$ac_cv_prog_LIPO_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
NM_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=nm`
- test $NM_FOR_TARGET=nm && NM_FOR_TARGET=
- ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ test $NM_FOR_TARGET = nm && NM_FOR_TARGET=
+ test -n "$NM_FOR_TARGET" && ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_NM_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET=$NM_FOR_TARGET
+elif test -n "$ac_cv_prog_NM_FOR_TARGET"; then
+ NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_NM_FOR_TARGET"; then
+ for ncn_progname in nm; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $NM_FOR_TARGET" >&5
+echo "${ECHO_T}$NM_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in nm; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
OBJDUMP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objdump`
- test $OBJDUMP_FOR_TARGET=objdump && OBJDUMP_FOR_TARGET=
- ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ test $OBJDUMP_FOR_TARGET = objdump && OBJDUMP_FOR_TARGET=
+ test -n "$OBJDUMP_FOR_TARGET" && ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+elif test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
+ OBJDUMP_FOR_TARGET=$ac_cv_prog_OBJDUMP_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
+ for ncn_progname in objdump; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJDUMP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$OBJDUMP_FOR_TARGET"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+OBJDUMP_FOR_TARGET=$ac_cv_prog_OBJDUMP_FOR_TARGET
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $OBJDUMP_FOR_TARGET" >&5
+echo "${ECHO_T}$OBJDUMP_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in objdump; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
OBJDUMP_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ OBJDUMP_FOR_TARGET="$ac_cv_prog_OBJDUMP_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
RANLIB_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ranlib`
- test $RANLIB_FOR_TARGET=ranlib && RANLIB_FOR_TARGET=
- ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ test $RANLIB_FOR_TARGET = ranlib && RANLIB_FOR_TARGET=
+ test -n "$RANLIB_FOR_TARGET" && ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_RANLIB_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+elif test -n "$ac_cv_prog_RANLIB_FOR_TARGET"; then
+ RANLIB_FOR_TARGET=$ac_cv_prog_RANLIB_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_RANLIB_FOR_TARGET"; then
+ for ncn_progname in ranlib; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB_FOR_TARGET=$ac_cv_prog_RANLIB_FOR_TARGET
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $RANLIB_FOR_TARGET" >&5
+echo "${ECHO_T}$RANLIB_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in ranlib; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
RANLIB_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
STRIP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=strip`
- test $STRIP_FOR_TARGET=strip && STRIP_FOR_TARGET=
- ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ test $STRIP_FOR_TARGET = strip && STRIP_FOR_TARGET=
+ test -n "$STRIP_FOR_TARGET" && ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_STRIP_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
fi
-if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+
+
+if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+elif test -n "$ac_cv_prog_STRIP_FOR_TARGET"; then
+ STRIP_FOR_TARGET=$ac_cv_prog_STRIP_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_STRIP_FOR_TARGET"; then
+ for ncn_progname in strip; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP_FOR_TARGET=$ac_cv_prog_STRIP_FOR_TARGET
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $STRIP_FOR_TARGET" >&5
+echo "${ECHO_T}$STRIP_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in strip; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
STRIP_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ STRIP_FOR_TARGET="$ac_cv_prog_STRIP_FOR_TARGET"
fi
else
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
WINDRES_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=windres`
- test $WINDRES_FOR_TARGET=windres && WINDRES_FOR_TARGET=
- ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ test $WINDRES_FOR_TARGET = windres && WINDRES_FOR_TARGET=
+ test -n "$WINDRES_FOR_TARGET" && ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
fi
fi
if test -z "$ac_cv_path_WINDRES_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
fi
if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
+
+
+if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+elif test -n "$ac_cv_prog_WINDRES_FOR_TARGET"; then
+ WINDRES_FOR_TARGET=$ac_cv_prog_WINDRES_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_WINDRES_FOR_TARGET"; then
+ for ncn_progname in windres; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDRES_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+WINDRES_FOR_TARGET=$ac_cv_prog_WINDRES_FOR_TARGET
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDRES_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDRES_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test -n "$with_build_time_tools"; then
for ncn_progname in windres; do
echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
else
WINDRES_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
+else
+ WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
fi
else
fi
+
+
+if test -z "$ac_cv_path_WINDMC_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo "$as_me:$LINENO: checking for windmc in $with_build_time_tools" >&5
+echo $ECHO_N "checking for windmc in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/windmc; then
+ WINDMC_FOR_TARGET=`cd $with_build_time_tools && pwd`/windmc
+ ac_cv_path_WINDMC_FOR_TARGET=$WINDMC_FOR_TARGET
+ echo "$as_me:$LINENO: result: $ac_cv_path_WINDMC_FOR_TARGET" >&5
+echo "${ECHO_T}$ac_cv_path_WINDMC_FOR_TARGET" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ WINDMC_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=windmc`
+ test $WINDMC_FOR_TARGET = windmc && WINDMC_FOR_TARGET=
+ test -n "$WINDMC_FOR_TARGET" && ac_cv_path_WINDMC_FOR_TARGET=$WINDMC_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_WINDMC_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "windmc", so it can be a program name with args.
+set dummy windmc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_WINDMC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $WINDMC_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_WINDMC_FOR_TARGET="$WINDMC_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_WINDMC_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+WINDMC_FOR_TARGET=$ac_cv_path_WINDMC_FOR_TARGET
+
+if test -n "$WINDMC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDMC_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDMC_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_path_WINDMC_FOR_TARGET" ; then
+
+
+if test -n "$WINDMC_FOR_TARGET"; then
+ ac_cv_prog_WINDMC_FOR_TARGET=$WINDMC_FOR_TARGET
+elif test -n "$ac_cv_prog_WINDMC_FOR_TARGET"; then
+ WINDMC_FOR_TARGET=$ac_cv_prog_WINDMC_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_WINDMC_FOR_TARGET"; then
+ for ncn_progname in windmc; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDMC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$WINDMC_FOR_TARGET"; then
+ ac_cv_prog_WINDMC_FOR_TARGET="$WINDMC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDMC_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+WINDMC_FOR_TARGET=$ac_cv_prog_WINDMC_FOR_TARGET
+if test -n "$WINDMC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDMC_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDMC_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDMC_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in windmc; do
+ echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_WINDMC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ break
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDMC_FOR_TARGET"; then
+ for ncn_progname in windmc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDMC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$WINDMC_FOR_TARGET"; then
+ ac_cv_prog_WINDMC_FOR_TARGET="$WINDMC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDMC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+WINDMC_FOR_TARGET=$ac_cv_prog_WINDMC_FOR_TARGET
+if test -n "$WINDMC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDMC_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDMC_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_WINDMC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDMC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$WINDMC_FOR_TARGET"; then
+ ac_cv_prog_WINDMC_FOR_TARGET="$WINDMC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDMC_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+WINDMC_FOR_TARGET=$ac_cv_prog_WINDMC_FOR_TARGET
+if test -n "$WINDMC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDMC_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDMC_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_WINDMC_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDMC_FOR_TARGET" ; then
+ set dummy windmc
+ if test $build = $target ; then
+ WINDMC_FOR_TARGET="$2"
+ else
+ WINDMC_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ WINDMC_FOR_TARGET="$ac_cv_prog_WINDMC_FOR_TARGET"
+fi
+
+else
+ WINDMC_FOR_TARGET=$ac_cv_path_WINDMC_FOR_TARGET
+fi
+
+
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo "$as_me:$LINENO: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $AR_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $AR_FOR_TARGET\`" >&6
+ ac_dir=`dirname $AR_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $AR_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $AR_FOR_TARGET\`" >&6
+ ac_dir=`dirname $AR_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
AR_FOR_TARGET='$(AR)'
if test "x${build}" != "x${host}" ; then
if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $AS_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $AS_FOR_TARGET\`" >&6
+ ac_dir=`dirname $AS_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $AS_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $AS_FOR_TARGET\`" >&6
+ ac_dir=`dirname $AS_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
AS_FOR_TARGET='$(AS)'
if test "x${build}" != "x${host}" ; then
if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $CC_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $CC_FOR_TARGET\`" >&6
+ ac_dir=`dirname $CC_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $CC_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $CC_FOR_TARGET\`" >&6
+ ac_dir=`dirname $CC_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
CC_FOR_TARGET='$(CC)'
if test "x${build}" != "x${host}" ; then
if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $CXX_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $CXX_FOR_TARGET\`" >&6
+ ac_dir=`dirname $CXX_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $CXX_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $CXX_FOR_TARGET\`" >&6
+ ac_dir=`dirname $CXX_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
CXX_FOR_TARGET='$(CXX)'
if test "x${build}" != "x${host}" ; then
if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&6
+ ac_dir=`dirname $RAW_CXX_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&6
+ ac_dir=`dirname $RAW_CXX_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
RAW_CXX_FOR_TARGET='$(CXX)'
if test "x${build}" != "x${host}" ; then
if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&6
+ ac_dir=`dirname $DLLTOOL_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&6
+ ac_dir=`dirname $DLLTOOL_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
DLLTOOL_FOR_TARGET='$(DLLTOOL)'
if test "x${build}" != "x${host}" ; then
if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCC_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $GCC_FOR_TARGET\`" >&6
+ ac_dir=`dirname $GCC_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCC_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $GCC_FOR_TARGET\`" >&6
+ ac_dir=`dirname $GCC_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GCC_FOR_TARGET='$()'
if test "x${build}" != "x${host}" ; then
if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&6
+ ac_dir=`dirname $GCJ_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&6
+ ac_dir=`dirname $GCJ_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GCJ_FOR_TARGET='$(GCJ)'
if test "x${build}" != "x${host}" ; then
if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&6
+ ac_dir=`dirname $GFORTRAN_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&6
+ ac_dir=`dirname $GFORTRAN_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GFORTRAN_FOR_TARGET='$(GFORTRAN)'
if test "x${build}" != "x${host}" ; then
if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $LD_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $LD_FOR_TARGET\`" >&6
+ ac_dir=`dirname $LD_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $LD_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $LD_FOR_TARGET\`" >&6
+ ac_dir=`dirname $LD_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
LD_FOR_TARGET='$(LD)'
if test "x${build}" != "x${host}" ; then
if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&6
+ ac_dir=`dirname $LIPO_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
else
if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&6
+ ac_dir=`dirname $LIPO_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
LIPO_FOR_TARGET='$(LIPO)'
if test "x${build}" != "x${host}" ; then
if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $NM_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $NM_FOR_TARGET\`" >&6
+ ac_dir=`dirname $NM_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $NM_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $NM_FOR_TARGET\`" >&6
+ ac_dir=`dirname $NM_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
NM_FOR_TARGET='$(NM)'
if test "x${build}" != "x${host}" ; then
if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $OBJDUMP_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $OBJDUMP_FOR_TARGET\`" >&6
+ ac_dir=`dirname $OBJDUMP_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $OBJDUMP_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $OBJDUMP_FOR_TARGET\`" >&6
+ ac_dir=`dirname $OBJDUMP_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
OBJDUMP_FOR_TARGET='$(OBJDUMP)'
if test "x${build}" != "x${host}" ; then
if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $RANLIB_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $RANLIB_FOR_TARGET\`" >&6
+ ac_dir=`dirname $RANLIB_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $RANLIB_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $RANLIB_FOR_TARGET\`" >&6
+ ac_dir=`dirname $RANLIB_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
RANLIB_FOR_TARGET='$(RANLIB)'
if test "x${build}" != "x${host}" ; then
if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $STRIP_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $STRIP_FOR_TARGET\`" >&6
+ ac_dir=`dirname $STRIP_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $STRIP_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $STRIP_FOR_TARGET\`" >&6
+ ac_dir=`dirname $STRIP_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
STRIP_FOR_TARGET='$(STRIP)'
if test "x${build}" != "x${host}" ; then
if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $WINDRES_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $WINDRES_FOR_TARGET\`" >&6
+ ac_dir=`dirname $WINDRES_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
else
# Canadian cross, just use what we found
echo "$as_me:$LINENO: result: pre-installed" >&5
echo "${ECHO_T}just compiled" >&6
elif expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
- echo "$as_me:$LINENO: result: pre-installed in \`dirname $WINDRES_FOR_TARGET\`" >&5
-echo "${ECHO_T}pre-installed in \`dirname $WINDRES_FOR_TARGET\`" >&6
+ ac_dir=`dirname $WINDRES_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
elif test "x$target" = "x$host"; then
# We can use an host tool
WINDRES_FOR_TARGET='$(WINDRES)'
fi
fi
+echo "$as_me:$LINENO: checking where to find the target windmc" >&5
+echo $ECHO_N "checking where to find the target windmc... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$WINDMC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $WINDMC_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ WINDMC_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windmc'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$WINDMC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $WINDMC_FOR_TARGET`
+ echo "$as_me:$LINENO: result: pre-installed in $ac_dir" >&5
+echo "${ECHO_T}pre-installed in $ac_dir" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ WINDMC_FOR_TARGET='$(WINDMC)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+#if (__GNUC__ < 3) \
+ || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \
+ || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1)))
+#error http://gcc.gnu.org/PR29382
+#endif
+
int
main ()
{
enableval="$enable_stage1_checking"
stage1_checking=--enable-checking=${enable_stage1_checking}
else
- if test "x$enable_checking" = xno; then
- stage1_checking=--enable-checking
+ if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
+ stage1_checking=--enable-checking=yes,types
else
- stage1_checking=--enable-checking${enable_checking+=}$enable_checking
+ stage1_checking=--enable-checking=$enable_checking,types
fi
fi;
fi;
+# Check whether --with-pdfdir or --without-pdfdir was given.
+if test "${with_pdfdir+set}" = set; then
+ withval="$with_pdfdir"
+ pdfdir="\${prefix}/${withval}"
+else
+ pdfdir="\${docdir}"
+fi;
+
+
# Check whether --with-htmldir or --without-htmldir was given.
if test "${with_htmldir+set}" = set; then
withval="$with_htmldir"
+
ac_config_files="$ac_config_files Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
s,@ECHO_N@,$ECHO_N,;t t
s,@ECHO_T@,$ECHO_T,;t t
s,@LIBS@,$LIBS,;t t
+s,@TOPLEVEL_CONFIGURE_ARGUMENTS@,$TOPLEVEL_CONFIGURE_ARGUMENTS,;t t
s,@build@,$build,;t t
s,@build_cpu@,$build_cpu,;t t
s,@build_vendor@,$build_vendor,;t t
s,@INSTALL_DATA@,$INSTALL_DATA,;t t
s,@LN@,$LN,;t t
s,@LN_S@,$LN_S,;t t
-s,@TOPLEVEL_CONFIGURE_ARGUMENTS@,$TOPLEVEL_CONFIGURE_ARGUMENTS,;t t
s,@build_libsubdir@,$build_libsubdir,;t t
s,@build_subdir@,$build_subdir,;t t
s,@host_subdir@,$host_subdir,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
+s,@CXX@,$CXX,;t t
+s,@CXXFLAGS@,$CXXFLAGS,;t t
+s,@ac_ct_CXX@,$ac_ct_CXX,;t t
s,@GNATBIND@,$GNATBIND,;t t
s,@ac_ct_GNATBIND@,$ac_ct_GNATBIND,;t t
s,@GNATMAKE@,$GNATMAKE,;t t
s,@do_compare@,$do_compare,;t t
s,@gmplibs@,$gmplibs,;t t
s,@gmpinc@,$gmpinc,;t t
+s,@ppllibs@,$ppllibs,;t t
+s,@pplinc@,$pplinc,;t t
+s,@clooglibs@,$clooglibs,;t t
+s,@clooginc@,$clooginc,;t t
s,@stage1_languages@,$stage1_languages,;t t
s,@SYSROOT_CFLAGS_FOR_TARGET@,$SYSROOT_CFLAGS_FOR_TARGET,;t t
+s,@DEBUG_PREFIX_CFLAGS_FOR_TARGET@,$DEBUG_PREFIX_CFLAGS_FOR_TARGET,;t t
+s,@CFLAGS_FOR_TARGET@,$CFLAGS_FOR_TARGET,;t t
+s,@CXXFLAGS_FOR_TARGET@,$CXXFLAGS_FOR_TARGET,;t t
s,@RPATH_ENVVAR@,$RPATH_ENVVAR,;t t
+s,@GCC_SHLIB_SUBDIR@,$GCC_SHLIB_SUBDIR,;t t
s,@tooldir@,$tooldir,;t t
s,@build_tooldir@,$build_tooldir,;t t
s,@CONFIGURE_GDB_TK@,$CONFIGURE_GDB_TK,;t t
s,@host_configargs@,$host_configargs,;t t
s,@configdirs@,$configdirs,;t t
s,@target_configargs@,$target_configargs,;t t
+s,@AR_FOR_BUILD@,$AR_FOR_BUILD,;t t
+s,@AS_FOR_BUILD@,$AS_FOR_BUILD,;t t
s,@CC_FOR_BUILD@,$CC_FOR_BUILD,;t t
+s,@CFLAGS_FOR_BUILD@,$CFLAGS_FOR_BUILD,;t t
+s,@CXXFLAGS_FOR_BUILD@,$CXXFLAGS_FOR_BUILD,;t t
+s,@CXX_FOR_BUILD@,$CXX_FOR_BUILD,;t t
+s,@DLLTOOL_FOR_BUILD@,$DLLTOOL_FOR_BUILD,;t t
+s,@GCJ_FOR_BUILD@,$GCJ_FOR_BUILD,;t t
+s,@GFORTRAN_FOR_BUILD@,$GFORTRAN_FOR_BUILD,;t t
+s,@LDFLAGS_FOR_BUILD@,$LDFLAGS_FOR_BUILD,;t t
+s,@LD_FOR_BUILD@,$LD_FOR_BUILD,;t t
+s,@NM_FOR_BUILD@,$NM_FOR_BUILD,;t t
+s,@RANLIB_FOR_BUILD@,$RANLIB_FOR_BUILD,;t t
+s,@WINDMC_FOR_BUILD@,$WINDMC_FOR_BUILD,;t t
+s,@WINDRES_FOR_BUILD@,$WINDRES_FOR_BUILD,;t t
s,@config_shell@,$config_shell,;t t
s,@YACC@,$YACC,;t t
s,@BISON@,$BISON,;t t
s,@RANLIB@,$RANLIB,;t t
s,@STRIP@,$STRIP,;t t
s,@WINDRES@,$WINDRES,;t t
+s,@WINDMC@,$WINDMC,;t t
s,@OBJCOPY@,$OBJCOPY,;t t
s,@OBJDUMP@,$OBJDUMP,;t t
-s,@CXX@,$CXX,;t t
-s,@CFLAGS_FOR_BUILD@,$CFLAGS_FOR_BUILD,;t t
-s,@CXXFLAGS@,$CXXFLAGS,;t t
s,@CC_FOR_TARGET@,$CC_FOR_TARGET,;t t
s,@CXX_FOR_TARGET@,$CXX_FOR_TARGET,;t t
s,@GCC_FOR_TARGET@,$GCC_FOR_TARGET,;t t
s,@RANLIB_FOR_TARGET@,$RANLIB_FOR_TARGET,;t t
s,@STRIP_FOR_TARGET@,$STRIP_FOR_TARGET,;t t
s,@WINDRES_FOR_TARGET@,$WINDRES_FOR_TARGET,;t t
+s,@WINDMC_FOR_TARGET@,$WINDMC_FOR_TARGET,;t t
s,@RAW_CXX_FOR_TARGET@,$RAW_CXX_FOR_TARGET,;t t
s,@FLAGS_FOR_TARGET@,$FLAGS_FOR_TARGET,;t t
s,@COMPILER_AS_FOR_TARGET@,$COMPILER_AS_FOR_TARGET,;t t
s,@stage2_werror_flag@,$stage2_werror_flag,;t t
s,@datarootdir@,$datarootdir,;t t
s,@docdir@,$docdir,;t t
+s,@pdfdir@,$pdfdir,;t t
s,@htmldir@,$htmldir,;t t
s,@LIBOBJS@,$LIBOBJS,;t t
s,@LTLIBOBJS@,$LTLIBOBJS,;t t