#!/bin/sh
+### WARNING: this file contains embedded tabs. Do not run untabify on this file.
+
# Configuration script
-# Copyright (C) 1988, 1990, 1991, 1992 Free Software Foundation, Inc.
+# Copyright (C) 1988, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
#
# If configure succeeds, it leaves its status in config.status.
# If configure fails after disturbing the status quo,
-# config.status is removed.
+# config.status is removed.
#
export PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0 $argv; kill $$)
gas=default
host_alias=
host_makefile_frag=
+moveifchange=
next_host=
next_prefix=
next_site=
next_target=
next_tmpdir=
norecursion=
+package_makefile_frag=
prefix=/usr/local
progname=
program_prefix=
-program_prefix_option=
-silent=
+program_prefixoption=
+program_suffix=
+program_suffixoption=
+program_transform_name=
+program_transform_nameoption=
+redirect=">/dev/null"
+removing=
+site=
site_makefile_frag=
+site_option=
srcdir=
srctrigger=
+subdirs=
target_alias=
target_makefile_frag=
undefinedargs=
-verbose=
version="$Revision$"
x11=default
## path. Since PATH might include "." we also add `pwd` to the end of PATH.
##
-PWD=`pwd`
progname=$0
+# if PWD already has a value, it is probably wrong.
+if [ -n "$PWD" ]; then PWD=`pwd`; fi
case "${progname}" in
/*) ;;
*/*) ;;
*)
- PATH=$PATH:${PWD} ; export PATH
- ;;
+ PATH=$PATH:${PWD=`pwd`} ; export PATH
+ ;;
esac
for arg in $*;
do
- # handle things that might have args following as separate words
- if [ -n "${next_prefix}" ] ; then prefix=${arg} ; prefixoption="-prefix=${prefix}" ; next_prefix=
- elif [ -n "${next_exec_prefix}" ] ; then
- exec_prefix=${arg}
- exec_prefixoption="-exec_prefix=${exec_prefix}"
- next_exec_prefix=
- elif [ -n "${next_site}" ] ; then site=${arg} ; next_site=
- # remove any possible trailing slash from srcdir. See note below.
- elif [ -n "${next_srcdir}" ] ; then srcdir=`echo ${arg} | sed -e 's:/$::'` ; next_srcdir=
- elif [ -n "${next_program_prefix}" ] ; then
- program_prefix=${arg}
- program_prefixoption="-program_prefix=${program_prefix}"
- next_program_prefix=
- elif [ -n "${next_target}" ] ; then
- next_target=
- case "${target_alias}" in
- "")
- target_alias="${arg}"
- ;;
- *)
- echo '***' Can only configure for one target at a time. 1>&2
- fatal=yes
- ;;
- esac
- elif [ -n "${next_tmpdir}" ] ; then
- next_tmpdir=
- tmpdiroption="--tmpdir=${arg}"
- TMPDIR=${arg}
-
- else
- case ${arg} in
- -exec_prefix=* | --exec_prefix=* | --exec_prefi=* | --exec_pref=* | --exec_pre=* | --exec_pr=* | --exec_p=* | --exec_=* | --exec=* | --exe=* | --ex=* | --e=*)
- exec_prefix=`echo ${arg} | sed 's/^[-a-z_]*=//'`
- exec_prefixoption=${arg}
- ;;
- -exec_prefix | --exec_prefix | --exec_prefi | --exec_pref | --exec_pre | --exec_pr | --exec_p | --exec_ | --exec | --exe | --ex | --e)
- next_exec_prefix=yes
- ;;
- -gas | --g*)
- gas=yes
- ;;
- -help | --he*)
- fatal=true
- ;;
- -host=* | --host=* | --hos=* | --ho=*)
- case "${host_alias}" in
- "")
- host_alias="`echo ${arg} | sed 's/^[-a-z]*=//'`"
- ;;
- *)
- echo '***' Can only configure for one host at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- -nfp | --nf*)
- floating_point=no
- ;;
- -norecursion | --no*)
- norecursion=true
- ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=*)
- prefix=`echo ${arg} | sed 's/^[-a-z]*=//'`
- prefixoption=${arg}
- ;;
- -prefix | --prefix | --prefi | --pref | --pre)
- next_prefix=yes
- ;;
- -program_prefix=* | --program_prefix=* | --program_prefi=* | --program_pref=* | --program_pre=* | --program_pr=* | --program_p=* | --program_=* | --program=* | --progra=* | --progr=* | --prog=* | --pro=*)
- program_prefix=`echo ${arg} | sed 's/^[-a-z]*=//'`
- program_prefixoption=${arg}
- ;;
- -program_prefix | --program_prefix | --program_prefi | --program_pref | --program_pre | --program_pr | --program_p | --program_ | --program | --progra | --progr | --prog | --pro)
- next_program_prefix=yes
- ;;
- -s | -silent | --silent | --silen | --sile | --sil)
- silent=true
- arguments=`echo ${arguments} | sed "s:${arg}::"`
- ;;
- -site=* | --site=* | --sit=* | --si=*)
- site=`echo ${arg} | sed 's/^[-a-z]*=//'`
- ;;
- -site | --site | --sit)
- next_site=yes
- ;;
- # remove trailing slashes. Otherwise, when the file name gets
- # bolted into an object file as debug info, it has two slashes in
- # it. Ordinarily this is ok, but emacs takes double slash to
- # mean "forget the first part".
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=`echo ${arg} | sed 's/^[-a-z]*=//' | sed -e 's:/$::'`
- ;;
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- next_srcdir=yes
- ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=*)
- case "${target_alias}" in
- "") target_alias="`echo ${arg} | sed 's/^[-a-z]*=//'`" ;;
- *)
- echo '***' Can only configure for one target at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- -target | --target | --targe | --targ | --tar | --ta)
- next_target=yes
- ;;
- -tmpdir=* | --tmpdir=* | --tmpdi=* | --tmpd=* | --tmp=* | --tm=*)
- tmpdiroption=${arg}
- TMPDIR=`echo ${arg} | sed 's/^[-a-z]*=//'`
- ;;
- -tmpdir | --tmpdir | --tmpdi | --tmpd | --tmp | --tm)
- next_tmpdir=yes
- ;;
- -v | -verbose | --v)
- verbose=${arg}
- ;;
- -version | -V | --version | --V)
- echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
- exit 0
- ;;
- -x | --x) ;;
- -* | --*)
- (echo ;
- echo "Unrecognized option: \"${arg}\"". ;
- echo) 1>&2
- fatal=true
- ;;
- *)
- case "${undefs}" in
- "")
- undefs="${arg}"
- ;;
- *)
- echo '***' Can only configure for one host and one target at a time. 1>&2
- fatal=yes
- ;;
- esac
- ;;
- esac
- fi
+ # handle things that might have args following as separate words
+ if [ -n "${next_prefix}" ] ; then prefix=${arg} ; prefixoption="-prefix=${prefix}" ; next_prefix=
+ elif [ -n "${next_exec_prefix}" ] ; then
+ exec_prefix=${arg}
+ exec_prefixoption="-exec-prefix=${exec_prefix}"
+ next_exec_prefix=
+ elif [ -n "${next_site}" ] ; then site=${arg} ; site_option=-site=${site} ; next_site=
+ # remove any possible trailing slash from srcdir. See note below.
+ elif [ -n "${next_srcdir}" ] ; then srcdir=`echo ${arg} | sed -e 's:/$::'` ; next_srcdir=
+ elif [ -n "${next_program_prefix}" ] ; then
+ program_prefix=${arg}
+ program_prefixoption="-program_prefix=${program_prefix}"
+ next_program_prefix=
+ elif [ -n "${next_program_suffix}" ] ; then
+ program_suffix=${arg}
+ program_suffixoption="-program_suffix=${program_suffix}"
+ next_program_suffix=
+ elif [ -n "${next_program_transform_name}" ] ; then
+ # Double any backslashes or dollar signs in the argument
+ if [ -n "${arg}" ] ; then
+ program_transform_name="${program_transform_name} -e `echo ${arg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
+ fi
+ program_transform_nameoption="${program_transform_nameoption} --program-transform-name='${arg}'"
+ next_program_transform_name=
+ elif [ -n "${next_target}" ] ; then
+ next_target=
+ case "${target_alias}" in
+ "")
+ target_alias="${arg}"
+ ;;
+ *)
+ echo '***' Can only configure for one target at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ elif [ -n "${next_tmpdir}" ] ; then
+ next_tmpdir=
+ tmpdiroption="--tmpdir=${arg}"
+ TMPDIR=${arg}
+
+ else
+ case ${arg} in
+ -exec_prefix=* | --exec_prefix=* | --exec_prefi=* | --exec_pref=* | --exec_pre=* | --exec_pr=* | --exec_p=* | --exec_=* | --exec=* | --exe=* | --ex=* | --e=* | -exec-prefix=* | --exec-prefix=* | --exec-prefi=* | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* )
+ exec_prefix=`echo ${arg} | sed 's/^[-a-z_]*=//'`
+ exec_prefixoption=${arg}
+ ;;
+ -exec_prefix | --exec_prefix | --exec_prefi | --exec_pref | --exec_pre | --exec_pr | --exec_p | --exec_ | --exec | --exe | --ex | --e | -exec-prefix | --exec-prefix | --exec-prefi | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec-)
+ next_exec_prefix=yes
+ ;;
+ -gas | --g*)
+ gas=yes
+ ;;
+ -help | --he*)
+ fatal=true
+ ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ case "${host_alias}" in
+ "")
+ host_alias="`echo ${arg} | sed 's/^[-a-z]*=//'`"
+ ;;
+ *)
+ echo '***' Can only configure for one host at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ ;;
+ -nfp | --nf*)
+ floating_point=no
+ ;;
+ -norecursion | --no*)
+ norecursion=true
+ ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=*)
+ prefix=`echo ${arg} | sed 's/^[-a-z]*=//'`
+ prefixoption=${arg}
+ ;;
+ -prefix | --prefix | --prefi | --pref | --pre)
+ next_prefix=yes
+ ;;
+ -rm | --rm) removing=${arg} ;;
+ -program_prefix=* | --program_prefix=* | --program_prefi=* | --program_pref=* | --program_pre=* | --program_pr=* | --program_p=* | -program-prefix=* | --program-prefix=* | --program-prefi=* | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=`echo ${arg} | sed 's/^[-a-z_]*=//'`
+ program_prefixoption=${arg}
+ ;;
+ -program_prefix | --program_prefix | --program_prefi | --program_pref | --program_pre | --program_pr | --program_p | -program-prefix | --program-prefix | --program-prefi | --program-pref | --program-pre | --program-pr | --program-p)
+ next_program_prefix=yes
+ ;;
+ -program_suffix=* | --program_suffix=* | --program_suffi=* | --program_suff=* | --program_suf=* | --program_su=* | --program_s=* | -program-suffix=* | --program-suffix=* | --program-suffi=* | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=`echo ${arg} | sed 's/^[-a-z_]*=//'`
+ program_suffixoption=${arg}
+ ;;
+ -program_suffix | --program_suffix | --program_suffi | --program_suff | --program_suf | --program_su | --program_s |-program-suffix | --program-suffix | --program-suffi | --program-suff | --program-suf | --program-su | --program-s)
+ next_program_suffix=yes
+ ;;
+ -program_transform_name=* | --program_transform_name=* | --program_transform_nam=* | --program_transform_na=* | --program_transform_n=* | --program_transform_=* | --program_transform=* | --program_transfor=* | --program_transfo=* | --program_transf=* | --program_trans=* | --program_tran=* | --program_tra=* | --program_tr=* | --program_t=* | -program-transform-name=* | --program-transform-name=* | --program-transform-nam=* | --program-transform-na=* | --program-transform-n=* | --program-transform-=* | --program-transform=* | --program-transfor=* | --program-transfo=* | --program-transf=* | --program-trans=* | --program-tran=* | --program-tra=* | --program-tr=* | --program-t=*)
+ arg=`echo ${arg} | sed -e 's/^[-a-z_]*=//'`
+ # Double any \ or $ in the argument
+ if [ -n "${arg}" ] ; then
+ program_transform_name="${program_transform_name} -e `echo ${arg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
+ fi
+ program_transform_nameoption="${program_transform_nameoption} --program-transform-name='${arg}'"
+ ;;
+ -program_transform_name | --program_transform_name | --program_transform_nam | --program_transform_na | --program_transform_n | --program_transform_ | --program_transform | --program_transfor | --program_transfo | --program_transf | --program_trans | --program_tran | --program_tra | --program_tr | --program_t | -program-transform-name | --program-transform-name | --program-transform-nam | --program-transform-na | --program-transform-n | --program-transform- | --program-transform | --program-transfor | --program-transfo | --program-transf | --program-trans | --program-tran | --program-tra | --program-tr | --program-t)
+ next_program_transform_name=yes
+ ;;
+ -site=* | --site=* | --sit=* | --si=*)
+ site_option=${arg}
+ site=`echo ${arg} | sed 's/^[-a-z]*=//'`
+ ;;
+ -site | --site | --sit)
+ next_site=yes
+ ;;
+ # remove trailing slashes. Otherwise, when the file name gets
+ # bolted into an object file as debug info, it has two slashes in
+ # it. Ordinarily this is ok, but emacs takes double slash to
+ # mean "forget the first part".
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=`echo ${arg} | sed 's/^[-a-z]*=//' | sed -e 's:/$::'`
+ ;;
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ next_srcdir=yes
+ ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=*)
+ case "${target_alias}" in
+ "") target_alias="`echo ${arg} | sed 's/^[-a-z]*=//'`" ;;
+ *)
+ echo '***' Can only configure for one target at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ ;;
+ -target | --target | --targe | --targ | --tar | --ta)
+ next_target=yes
+ ;;
+ -tmpdir=* | --tmpdir=* | --tmpdi=* | --tmpd=* | --tmp=* | --tm=*)
+ tmpdiroption=${arg}
+ TMPDIR=`echo ${arg} | sed 's/^[-a-z]*=//'`
+ ;;
+ -tmpdir | --tmpdir | --tmpdi | --tmpd | --tmp | --tm)
+ next_tmpdir=yes
+ ;;
+ -v | -verbose | --v)
+ redirect=
+ verbose=-v
+ ;;
+ -version | -V | --version | --V)
+ echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
+ exit 0
+ ;;
+ -with*=* | --with*=*)
+ withopt=`echo ${arg} | sed 's:^-*\(with[^=]*\)=.*$:\1:;s/-/_/g'`
+ withval=`echo ${arg} | sed 's:^-*with[^=]*=\(.*\)$:\1:'`
+ eval $withopt="$withval"
+ withoptions="$withoptions $arg"
+ ;;
+ -without* | --without*)
+ withopt=`echo ${arg} | sed 's:^-*without:with:;s/-/_/g'`
+ eval $withopt=no
+ withoutoptions="$withoutoptions $arg"
+ ;;
+ -with* | --with*)
+ withopt=`echo ${arg} | sed 's:^-*with:with:;s/-/_/g'`
+ eval $withopt=yes
+ withoptions="$withoptions $arg"
+ ;;
+ -x | --x) ;;
+ -* | --*)
+ (echo ;
+ echo "Unrecognized option: \"${arg}\"". ;
+ echo) 1>&2
+ fatal=true
+ ;;
+ *)
+ case "${undefs}" in
+ "")
+ undefs="${arg}"
+ ;;
+ *)
+ echo '***' Can only configure for one host and one target at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ ;;
+ esac
+ fi
done
# process host and target
case "${fatal}" in
"")
-# # Complain if an arg is missing
-# if [ -z "${host_alias}" ] ; then
-# (echo ;
-# echo "configure: No HOST specified." ;
-# echo) 1>&2
-# fatal=true
-# fi
+# # Complain if an arg is missing
+# if [ -z "${host_alias}" ] ; then
+# (echo ;
+# echo "configure: No HOST specified." ;
+# echo) 1>&2
+# fatal=true
+# fi
### This is a bit twisted.
### * if all three are specified, this is an error.
### * if no targets are specified, then the unadorned args are targets, but if
### there were no unadorned args, then the hosts are also targets.
- if [ -n "${host_alias}" -a -n "${target_alias}" -a -n "${undefs}" ] ; then
- echo '***' Can only configure for one host and one target at a time. 1>&2
- fatal=yes
- elif [ -z "${host_alias}" -a -z "${undefs}" ] ; then
- echo '***' You must tell me for which host you want to configure. 1>&2
- fatal=yes
- else
- case "${host_alias}" in
- "") host_alias=${undefs} ;;
- *) ;;
- esac
-
- case "${target_alias}" in
- "")
- case "${undefs}" in
- "") target_alias=${host_alias} ;;
- *) target_alias=${undefs} ;;
+ if [ -n "${host_alias}" -a -n "${target_alias}" -a -n "${undefs}" ] ; then
+ echo '***' Can only configure for one host and one target at a time. 1>&2
+ fatal=yes
+ elif [ -z "${host_alias}" -a -z "${undefs}" ] ; then
+ echo '- You did not tell me what kind of host system you want to configure.
+- I will attempt to guess the kind of system this is.' 1>&2
+ guesssys=`echo ${progname} | sed 's/configure$/config.guess/'`
+ if tmp_alias=`${guesssys}` ; then
+ echo "- Looks like this is a ${tmp_alias}" 1>&2
+ host_alias=${tmp_alias}
+ case "${target_alias}" in
+ "") target_alias=${tmp_alias} ;;
+ *) ;;
esac
- ;;
- *) ;;
- esac
- fi
- ;;
+ arguments="--host=${host_alias} ${arguments}"
+ else
+ echo '- Failed to guess the system type. You need to tell me.' 1>&2
+ fatal=yes
+ fi
+ else
+ case "${host_alias}" in
+ "") host_alias=${undefs} ;;
+ *) ;;
+ esac
+
+ case "${target_alias}" in
+ "")
+ case "${undefs}" in
+ "") target_alias=${host_alias} ;;
+ *) target_alias=${undefs} ;;
+ esac
+ ;;
+ *) ;;
+ esac
+ fi
+ ;;
*) ;;
esac
if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then
- (echo "Usage: configure HOST" ;
- echo ;
- echo "Options: [defaults in brackets]" ;
- echo " -exec_prefix=MYDIR configure for installation of host dependent files into MYDIR. [\"/usr/local\"]" ;
- echo " -gas configure the compilers for use with gas. [native as]" ;
- echo " -help print this message. [normal config]" ;
- echo " -lang=LANG configure to build LANG. [gcc]" ;
- echo " -nfp configure the compilers default to soft floating point. [hard float]" ;
- echo " -norecursion configure this directory only. [recurse]" ;
- echo " -prefix=MYDIR configure for installation of host dependent files into MYDIR. [\"/usr/local\"]" ;
- echo " -program_prefix=FOO install programs with FOO prepended to their names. [ \"\" ]" ;
- echo " -site=SITE configure with site specific makefile for SITE" ;
- echo " -srcdir=DIR find the sources in DIR. [\".\" or \"..\"]" ;
- echo " -target=TARGET configure for TARGET. [TARGET = HOST]" ;
- echo " -tmpdir=TMPDIR create temporary files in TMPDIR. [ TMPDIR = \"/tmp\" ]" ;
- echo ;
- echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
- ) 1>&2
-
- if [ -r config.status ] ; then
- cat config.status
- fi
-
- exit 1
+ (echo "Usage: configure HOST" ;
+ echo ;
+ echo "Options: [defaults in brackets]" ;
+ echo " --prefix=MYDIR configure for installation of host dependent files into MYDIR. [\"/usr/local\"]" ;
+ echo " --exec-prefix=MYDIR configure for installation of host dependent files into MYDIR. [\"/usr/local\"]" ;
+ echo " --help print this message. [normal config]" ;
+ echo " --norecursion configure this directory only. [recurse]" ;
+ echo " --program-prefix=FOO install programs with FOO prepended to their names. [ \"\" ]" ;
+ echo " --program-suffix=FOO install programs with FOO appended to their names. [ \"\" ]" ;
+ echo " --program-transform-name=FOO install programs with names transformed by sed pattern FOO. [ \"\" ]" ;
+ echo " --site=SITE configure with site specific makefile for SITE" ;
+ echo " --srcdir=DIR find the sources in DIR. [\".\" or \"..\"]" ;
+ echo " --target=TARGET configure for TARGET. [TARGET = HOST]" ;
+ echo " --tmpdir=TMPDIR create temporary files in TMPDIR. [ TMPDIR = \"/tmp\" ]" ;
+ echo " --nfp configure the compilers default to soft floating point. [hard float]" ;
+ echo " --with-FOO, --with-FOO=BAR specify that FOO is available"
+ echo " --without-FOO specify that FOO is NOT available"
+ echo ;
+ echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
+ echo ;
+ ) 1>&2
+ if [ -r config.status ] ; then
+ cat config.status
+ fi
+
+ exit 1
fi
configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
+moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
-if ${configsub} `echo ${host_alias} | sed -e 's/ .*//'` >/dev/null 2>&1 ; then
- true
+# this is a hack. sun4 must always be a valid host alias or this will fail.
+if ${configsub} sun4 >/dev/null 2>&1 ; then
+ true
else
- echo '***' cannot find config.sub. 1>&2
- exit 1
+ echo '***' cannot find config.sub. 1>&2
+ exit 1
fi
+touch config.junk
+if ${moveifchange} config.junk config.trash ; then
+ true
+else
+ echo '***' cannot find move-if-change. 1>&2
+ exit 1
+fi
+rm -f config.junk config.trash
+
case "${srcdir}" in
"")
- if [ -r configure.in ] ; then
- srcdir=.
- else
- if [ -r ${progname}.in ] ; then
- srcdir=`echo ${progname} | sed 's:/configure$::'`
- else
- echo '***' "Can't find configure.in. Try using -srcdir=some_dir" 1>&2
- exit 1
- fi
- fi
- ;;
+ if [ -r configure.in ] ; then
+ srcdir=.
+ else
+ if [ -r ${progname}.in ] ; then
+ srcdir=`echo ${progname} | sed 's:/configure$::'`
+ else
+ echo '***' "Can't find configure.in. Try using -srcdir=some_dir" 1>&2
+ exit 1
+ fi
+ fi
+ ;;
*) ;;
esac
case "${srcdir}" in
".") ;;
*)
- if [ -f ${srcdir}/config.status ] ; then
- echo '***' Cannot configure for ${PWD} when ${srcdir}/config.status exists. 1>&2
- exit 1
- fi
+ if [ -f ${srcdir}/config.status ] ; then
+ echo '***' Cannot configure here in \"${PWD=`pwd`}\" when \"${srcdir}\" is currently configured. 1>&2
+ exit 1
+ fi
esac
# default exec_prefix
case "${exec_prefix}" in
-"") exec_prefix="${prefix}" ;;
+"") exec_prefix="\$(prefix)" ;;
*) ;;
esac
### break up ${srcdir}/configure.in.
case "`grep '^# per\-host:' ${srcdir}/configure.in`" in
"")
- echo '***' ${srcdir}/configure.in has no "per-host:" line. 1>&2
- exit 1
- ;;
+ echo '***' ${srcdir}/configure.in has no "per-host:" line. 1>&2
+ exit 1
+ ;;
*) ;;
esac
case "`grep '^# per\-target:' ${srcdir}/configure.in`" in
"")
- echo '***' ${srcdir}/configure.in has no "per-target:" line. 1>&2
- exit 1
- ;;
+ echo '***' ${srcdir}/configure.in has no "per-target:" line. 1>&2
+ exit 1
+ ;;
*) ;;
esac
# some sanity checks on configure.in
case "${srctrigger}" in
"")
- echo '***' srctrigger not set in ${PWD}/configure.in. 1>&2
- exit 1
- ;;
+ echo '***' srctrigger not set in ${PWD=`pwd`}/configure.in. 1>&2
+ exit 1
+ ;;
*) ;;
esac
# Find the source files, if location was not specified.
case "${srcdir}" in
"")
- srcdirdefaulted=1
- srcdir=.
- if [ ! -r ${srctrigger} ] ; then
- srcdir=..
- fi
- ;;
+ srcdirdefaulted=1
+ srcdir=.
+ if [ ! -r ${srctrigger} ] ; then
+ srcdir=..
+ fi
+ ;;
*) ;;
esac
if [ ! -r ${srcdir}/${srctrigger} ] ; then
- case "${srcdirdefaulted}" in
- "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD}/${srcdir}" 1>&2 ;;
- *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD}/. or ${PWD}/.." 1>&2 ;;
- esac
+ case "${srcdirdefaulted}" in
+ "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/${srcdir}" 1>&2 ;;
+ *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/. or ${PWD=`pwd`}/.." 1>&2 ;;
+ esac
- echo '***' \(At least ${srctrigger} is missing.\) 1>&2
- exit 1
+ echo '***' \(At least ${srctrigger} is missing.\) 1>&2
+ exit 1
fi
-# Set up the list of links to be made.
-# ${links} is the list of link names, and ${files} is the list of names to link to.
-
-# Make the links.
-configlinks="${links}"
-while [ -n "${files}" ] ; do
- # set file to car of files, files to cdr of files
- set ${files}; file=$1; shift; files=$*
- set ${links}; link=$1; shift; links=$*
-
- if [ ! -r ${srcdir}/${file} ] ; then
- echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
- echo '***' "since the file \"${file}\" does not exist." 1>&2
- exit 1
- fi
-
- ${remove} -f ${link}
- rm -f config.status
- # Make a symlink if possible, otherwise try a hard link
- ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
-
- if [ ! -r ${link} ] ; then
- echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
- exit 1
- fi
-
- case "${verbose}" in
- "") ;;
- *) echo "Linked \"${link}\" to \"${srcdir}/${file}\"." ;;
- esac
-done
-
-# Create a .gdbinit file which runs the one in srcdir
-# and tells GDB to look there for source files.
-
-if [ -r ${srcdir}/.gdbinit ] ; then
- case ${srcdir} in
- .)
- ;;
- *) cat > .gdbinit <<EOF
-# ${NO_EDIT} > .gdbinit
-dir .
-dir ${srcdir}
-source ${srcdir}/.gdbinit
-EOF
- ;;
- esac
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='$(exec_prefix)'/${target_alias}
+
+if [ "${host_alias}" != "${target_alias}" ] ; then
+ if [ "${program_prefixoption}" = "" ] ; then
+ if [ "${program_suffixoption}" = "" ] ; then
+ if [ "${program_transform_nameoption}" = "" ] ; then
+ program_prefix=${target_alias}- ;
+ fi
+ fi
+ fi
fi
-# Install a makefile, and make it set VPATH
-# if necessary so that the sources are found.
-# Also change its value of srcdir.
-# NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
-# been somewhat optimized and is perhaps a bit twisty.
-
-# code is order so as to try to sed the smallest input files we know.
-
-# the three makefile fragments MUST end up in the resulting Makefile in this order: target, host, and site.
-# so do these separately because I don't trust the order of sed -e expressions.
-
-# Conditionalize for this site from "Makefile.in" (or whatever it's called) into Makefile.tem
-case "${site}" in
-"") cp ${srcdir}/${Makefile_in} Makefile.tem ;;
-*)
- site_makefile_frag=${srcdir}/config/ms-${site}
-
- if [ -f ${site_makefile_frag} ] ; then
- sed -e "/^####/ r ${site_makefile_frag}" ${srcdir}/${Makefile_in} \
- > Makefile.tem
- else
- cp ${srcdir}/${Makefile_in} Makefile.tem
- site_makefile_frag=
- fi
- ;;
-esac
-# working copy now in Makefile.tem
-
-# Conditionalize the makefile for this host.
-case "${host_makefile_frag}" in
-"") mv Makefile.tem ${Makefile} ;;
-*)
- host_makefile_frag=${srcdir}/${host_makefile_frag}
- if [ -f ${host_makefile_frag} ] ; then
- sed -e "/^####/ r ${host_makefile_frag}" Makefile.tem > ${Makefile}
- else
- echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
- echo '***' is missing in ${PWD}. 1>&2
- mv Makefile.tem ${Makefile}
- fi
-esac
-# working copy now in ${Makefile}
+# Merge program_prefix and program_suffix onto program_transform_name
+# Use a double $ so that make ignores it
+if [ "${program_suffix}" != "" ] ; then
+ program_transform_name="-e s/\$\$/${program_suffix}/ ${program_transform_name}"
+fi
-# Conditionalize the makefile for this target.
-case "${target_makefile_frag}" in
-"") mv ${Makefile} Makefile.tem ;;
-*)
- target_makefile_frag=${srcdir}/${target_makefile_frag}
- if [ -f ${target_makefile_frag} ] ; then
- sed -e "/^####/ r ${target_makefile_frag}" ${Makefile} > Makefile.tem
- else
- mv ${Makefile} Makefile.tem
- target_makefile_frag=
- fi
- ;;
-esac
-# real copy now in Makefile.tem
+if [ "${program_prefix}" != "" ] ; then
+ program_transform_name="-e s/^/${program_prefix}/ ${program_transform_name}"
+fi
-# prepend warning about editting, and a bunch of variables.
-cat > ${Makefile} <<EOF
+for subdir in . ${subdirs} ; do
+
+ # ${subdir} is relative path from . to the directory we're currently
+ # configuring.
+ # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
+ invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
+
+ ### figure out what to do with srcdir
+ case "${srcdir}" in
+ ".") # no -srcdir option. We're building in place.
+ makesrcdir=. ;;
+ /*) # absolute path
+ makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
+ ;;
+ *) # otherwise relative
+ case "${subdir}" in
+ .) makesrcdir=${srcdir} ;;
+ *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
+ esac
+ ;;
+ esac
+
+ if [ "${subdir}/" != "./" ] ; then
+ Makefile=${subdir}/Makefile
+ fi
+
+ if [ ! -d ${subdir} ] ; then
+ if mkdir ${subdir} ; then
+ true
+ else
+ echo '***' "${progname}: could not make ${PWD=`pwd`}/${subdir}" 1>&2
+ exit 1
+ fi
+ fi
+
+ case "${removing}" in
+ "")
+ case "${subdir}" in
+ .) ;;
+ *) eval echo Building in ${subdir} ${redirect} ;;
+ esac
+
+ # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
+ # Set up the list of links to be made.
+ # ${links} is the list of link names, and ${files} is the list of names to link to.
+
+ # Make the links.
+ configlinks="${links}"
+ if [ -r ${subdir}/config.status ] ; then
+ mv -f ${subdir}/config.status ${subdir}/config.back
+ fi
+ while [ -n "${files}" ] ; do
+ # set file to car of files, files to cdr of files
+ set ${files}; file=$1; shift; files=$*
+ set ${links}; link=$1; shift; links=$*
+
+ if [ ! -r ${srcdir}/${file} ] ; then
+ echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
+ echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
+ exit 1
+ fi
+
+ ${remove} -f ${link}
+ # Make a symlink if possible, otherwise try a hard link
+ ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
+
+ if [ ! -r ${link} ] ; then
+ echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
+ exit 1
+ fi
+
+ echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
+ done
+
+ # Create a .gdbinit file which runs the one in srcdir
+ # and tells GDB to look there for source files.
+
+ if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ${subdir}/.gdbinit <<EOF
# ${NO_EDIT}
+dir .
+dir ${makesrcdir}
+source ${makesrcdir}/.gdbinit
+EOF
+ ;;
+ esac
+ fi
+
+ # Install a makefile, and make it set VPATH
+ # if necessary so that the sources are found.
+ # Also change its value of srcdir.
+ # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
+ # been somewhat optimized and is perhaps a bit twisty.
+
+ # code is order so as to try to sed the smallest input files we know.
+
+ # the four makefile fragments MUST end up in the resulting Makefile in this order:
+ # package, target, host, and site. so do these separately because I don't trust the
+ # order of sed -e expressions.
+
+ if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
+
+ # Conditionalize for this site from "Makefile.in" (or whatever it's called) into Makefile.tem
+ rm -f ${subdir}/Makefile.tem
+ case "${site}" in
+ "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
+ *)
+ site_makefile_frag=${srcdir}/config/ms-${site}
+
+ if [ -f ${site_makefile_frag} ] ; then
+ sed -e "/^####/ r ${site_makefile_frag}" ${srcdir}/${subdir}/${Makefile_in} \
+ > ${subdir}/Makefile.tem
+ else
+ cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
+ site_makefile_frag=
+ fi
+ ;;
+ esac
+ # working copy now in ${subdir}/Makefile.tem
+
+ # Conditionalize the makefile for this host.
+ rm -f ${Makefile}
+ case "${host_makefile_frag}" in
+ "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+ *)
+ if [ ! -f ${host_makefile_frag} ] ; then
+ host_makefile_frag=${srcdir}/${host_makefile_frag}
+ fi
+ if [ -f ${host_makefile_frag} ] ; then
+ sed -e "/^####/ r ${host_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
+ else
+ echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ mv ${subdir}/Makefile.tem ${Makefile}
+ fi
+ esac
+ # working copy now in ${Makefile}
+
+ # Conditionalize the makefile for this target.
+ rm -f ${subdir}/Makefile.tem
+ case "${target_makefile_frag}" in
+ "") mv ${Makefile} ${subdir}/Makefile.tem ;;
+ *)
+ if [ ! -f ${target_makefile_frag} ] ; then
+ target_makefile_frag=${srcdir}/${target_makefile_frag}
+ fi
+ if [ -f ${target_makefile_frag} ] ; then
+ sed -e "/^####/ r ${target_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
+ else
+ mv ${Makefile} ${subdir}/Makefile.tem
+ target_makefile_frag=
+ fi
+ ;;
+ esac
+ # real copy now in ${subdir}/Makefile.tem
+
+ # Conditionalize the makefile for this package.
+ rm -f ${Makefile}
+ case "${package_makefile_frag}" in
+ "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+ *)
+ if [ ! -f ${package_makefile_frag} ] ; then
+ package_makefile_frag=${srcdir}/${package_makefile_frag}
+ fi
+ if [ -f ${package_makefile_frag} ] ; then
+ sed -e "/^####/ r ${package_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
+ else
+ echo '***' Expected package makefile fragment \"${package_makefile_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ mv ${subdir}/Makefile.tem ${Makefile}
+ fi
+ esac
+ # working copy now in ${Makefile}
+
+ mv ${Makefile} ${subdir}/Makefile.tem
+
+ # real copy now in ${subdir}/Makefile.tem
+
+ # prepend warning about editting, and a bunch of variables.
+ rm -f ${Makefile}
+ cat > ${Makefile} <<EOF
+# ${NO_EDIT}
+VPATH = ${makesrcdir}
+links = ${configlinks}
host_alias = ${host_alias}
host_cpu = ${host_cpu}
host_vendor = ${host_vendor}
host_os = ${host_os}
+host_canonical = ${host_cpu}-${host_vendor}-${host_os}
target_alias = ${target_alias}
target_cpu = ${target_cpu}
target_vendor = ${target_vendor}
target_os = ${target_os}
-target_makefile_frag = ${target_makefile_frag}
-host_makefile_frag = ${host_makefile_frag}
-site_makefile_frag = ${site_makefile_frag}
-links = ${configlinks}
-VPATH = ${srcdir}
+target_canonical = ${target_cpu}-${target_vendor}-${target_os}
EOF
-
-# fixme: this shouldn't be in configure.
-# Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
-case "${host_alias}" in
-"${target_alias}")
- tooldir="$(libdir)"
- echo "ALL=all.internal" >> ${Makefile}
- ;;
-*)
- echo "CROSS=-DCROSS_COMPILE" >> ${Makefile}
- echo "ALL=all.cross" >> ${Makefile}
- case "${program_prefix}" in
- "") program_prefix=${target_alias}- ;;
- *) ;;
- esac
-
- tooldir="$(libdir)/${target_alias}"
- ;;
-esac
-
-# reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS, remove any form
-# feeds.
-sed -e "s:^prefix[ ]*=.*$:prefix = ${prefix}:" \
- -e "s:^exec_prefix[ ]*=.*$:exec_prefix = ${exec_prefix}:" \
- -e "s:^srcdir[ ]*=.*$:srcdir = ${srcdir}:" \
- -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
- -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
- -e "s/\f//" \
- -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
- -e "s:^tooldir[ ]*=.*$:tooldir = ${tooldir}:" \
- Makefile.tem >> ${Makefile}
-# final copy now in ${Makefile}
-
-rm Makefile.tem
-
-if [ -n "${verbose}" -o -z "${silent}" ] ; then
- case "${host_makefile_frag}" in
- "") using= ;;
- *) using="and \"${host_makefile_frag}\"" ;;
- esac
-
- case "${target_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${target_makefile_frag}\"" ;;
- esac
-
- case "${site_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${site_makefile_frag}\"" ;;
- esac
-
- echo "Created \"${Makefile}\" in" ${PWD} `echo "${using}" | sed 's/and/using/'`
-fi
-
-. ${tmpfile}.pos
-
-# describe the chosen configuration in config.status.
-# Make that file a shellscript which will reestablish
-# the same configuration. Used in Makefiles to rebuild
-# Makefiles.
-
-case "${norecursion}" in
-"") arguments="${arguments} -norecursion" ;;
-*) ;;
-esac
-
-echo "#!/bin/sh
+ case "${package_makefile_frag}" in
+ "") ;;
+ /*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
+ *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ /*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
+ *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${host_makefile_frag}" in
+ "") ;;
+ /*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
+ *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
+ esac
+
+ if [ "${site_makefile_frag}" != "" ] ; then
+ echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
+ fi
+
+ # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
+ # remove any form feeds.
+ if [ -z "${subdirs}" ]; then
+ rm -f ${subdir}/Makefile.tem2
+ sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
+ -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
+ ${subdir}/Makefile.tem > ${subdir}/Makefile.tem2
+ rm -f ${subdir}/Makefile.tem
+ mv ${subdir}/Makefile.tem2 ${subdir}/Makefile.tem
+ fi
+ sed -e "s:^prefix[ ]*=.*$:prefix = ${prefix}:" \
+ -e "s:^exec_prefix[ ]*=.*$:exec_prefix = ${exec_prefix}:" \
+ -e "s:^srcdir[ ]*=.*$:srcdir = ${makesrcdir}:" \
+ -e "s/\f//" \
+ -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
+ -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
+ -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
+ -e "s:^tooldir[ ]*=.*$:tooldir = ${tooldir}:" \
+ ${subdir}/Makefile.tem >> ${Makefile}
+ # final copy now in ${Makefile}
+
+ else
+ echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
+ fi
+
+ rm -f ${subdir}/Makefile.tem
+
+ case "${host_makefile_frag}" in
+ "") using= ;;
+ *) using="and \"${host_makefile_frag}\"" ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${target_makefile_frag}\"" ;;
+ esac
+
+ case "${site_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${site_makefile_frag}\"" ;;
+ esac
+
+ newusing=`echo "${using}" | sed 's/and/using/'`
+ using=${newusing}
+ echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using}
+
+ . ${tmpfile}.pos
+
+ # describe the chosen configuration in config.status.
+ # Make that file a shellscript which will reestablish
+ # the same configuration. Used in Makefiles to rebuild
+ # Makefiles.
+
+ case "${norecursion}" in
+ "") arguments="${arguments} -norecursion" ;;
+ *) ;;
+ esac
+
+ if [ ${subdir} = . ] ; then
+ echo "#!/bin/sh
+# ${NO_EDIT}
+# This directory was configured as follows:
+${progname}" ${arguments} "
+# ${using}" > ${subdir}/config.new
+ else
+ echo "#!/bin/sh
# ${NO_EDIT}
-# ${PWD} was configured as follows:
+# This directory was configured as follows:
+cd ${invsubdir}
${progname}" ${arguments} "
-# ${using}" > config.status
-chmod a+x config.status
+# ${using}" > ${subdir}/config.new
+ fi
+ chmod a+x ${subdir}/config.new
+ if [ -r ${subdir}/config.back ] ; then
+ mv -f ${subdir}/config.back ${subdir}/config.status
+ fi
+ ${moveifchange} ${subdir}/config.new ${subdir}/config.status
+ ;;
+
+ *) rm -f ${Makefile} ${subdir}/config.status ${links} ;;
+ esac
+done
# If there are subdirectories, then recur.
if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then
- for configdir in ${configdirs} ; do
- case "${verbose}" in
- "") ;;
- *) echo Configuring ${configdir}... ;;
- esac
-
- if [ -d ${srcdir}/${configdir} ] ; then
- case "${srcdir}" in
- ".") ;;
- *)
- if [ ! -d ./${configdir} ] ; then
- mkdir ./${configdir}
- fi
- ;;
- esac
-
- POPDIR=${PWD}
- cd ${configdir}
+ for configdir in ${configdirs} ; do
+
+ if [ -d ${srcdir}/${configdir} ] ; then
+ eval echo Configuring ${configdir}... ${redirect}
+ case "${srcdir}" in
+ ".") ;;
+ *)
+ if [ ! -d ./${configdir} ] ; then
+ if mkdir ./${configdir} ; then
+ true
+ else
+ echo '***' "${progname}: could not make ${PWD=`pwd`}/${configdir}" 1>&2
+ exit 1
+ fi
+ fi
+ ;;
+ esac
+
+ POPDIR=${PWD=`pwd`}
+ cd ${configdir}
### figure out what to do with srcdir
- case "${srcdir}" in
- ".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
- /*) # absolute path
- newsrcdir=${srcdir}/${configdir}
- srcdiroption="-srcdir=${newsrcdir}"
- ;;
- *) # otherwise relative
- newsrcdir=../${srcdir}/${configdir}
- srcdiroption="-srcdir=${newsrcdir}"
- ;;
- esac
+ case "${srcdir}" in
+ ".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
+ /*) # absolute path
+ newsrcdir=${srcdir}/${configdir}
+ srcdiroption="-srcdir=${newsrcdir}"
+ ;;
+ *) # otherwise relative
+ newsrcdir=../${srcdir}/${configdir}
+ srcdiroption="-srcdir=${newsrcdir}"
+ ;;
+ esac
### check for guested configure, otherwise fix possibly relative progname
- if [ -f ${newsrcdir}/configure ] ; then
- recprog=${newsrcdir}/configure
- else
- case "${progname}" in
- /*) recprog=${progname} ;;
- *) recprog=../${progname} ;;
- esac
- fi
+ if [ -f ${newsrcdir}/configure ] ; then
+ recprog=${newsrcdir}/configure
+ else
+ case "${progname}" in
+ /*) recprog=${progname} ;;
+ *) recprog=../${progname} ;;
+ esac
+ fi
### The recursion line is here.
- if ${recprog} -s ${host_alias} -target=${target_alias} \
- ${verbose} ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
- ${srcdiroption} ${program_prefixoption} ; then
- true
- else
- exit 1
- fi
-
- cd ${POPDIR}
- else
- case "${verbose}" in
- "") ;;
- *) echo Warning: source directory \"${srcdir}/${configdir}\" is missing. ;;
- esac
- fi
- done
+ if eval ${recprog} ${verbose} --host=${host_alias} --target=${target_alias} \
+ ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
+ ${srcdiroption} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${removing} ${redirect} ; then
+ true
+ else
+ exit 1
+ fi
+
+ cd ${POPDIR}
+ fi
+ done
fi
-### clean up.
-
-# trap cmd above handles this now:
-#rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
-
exit 0
#