m4_include(config/override.m4)
m4_include(config/proginstall.m4)
m4_include(config/elf.m4)
-m4_include(config/gcc-plugin.m4)
m4_include(config/ax_cxx_compile_stdcxx.m4)
+m4_include(config/gcc-plugin.m4)
m4_include([libtool.m4])
m4_include([ltoptions.m4])
m4_include([ltsugar.m4])
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gdbserver gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools c++tools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gdbserver gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gm2tools gotools c++tools"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
target-libgloss \
target-newlib \
target-libgomp \
- target-liboffloadmic \
target-libatomic \
target-libitm \
target-libstdc++-v3 \
target-libffi \
target-libobjc \
target-libada \
+ target-libgm2 \
target-libgo \
target-libphobos \
target-zlib"
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
| *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
- | *-*-solaris2* | *-*-nto* | *-*-nacl*)
+ | *-*-solaris2* | *-*-nto* | *-*-nacl* | *-*-haiku*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
noconfigdirs="$noconfigdirs gnattools"
fi
+AC_ARG_ENABLE(libgm2,
+[AS_HELP_STRING([--enable-libgm2], [build libgm2 directory])],
+ENABLE_LIBGM2=$enableval,
+ENABLE_LIBGM2=no)
+if test "${ENABLE_LIBGM2}" != "yes" ; then
+ noconfigdirs="$noconfigdirs gm2tools"
+fi
+
AC_ARG_ENABLE(libssp,
[AS_HELP_STRING([--enable-libssp], [build libssp directory])],
ENABLE_LIBSSP=$enableval,
noconfigdirs="$noconfigdirs target-libstdc++-v3"
fi]
-# If this is accelerator compiler and its target is intelmic we enable
-# target liboffloadmic by default. If this is compiler with offloading
-# for intelmic we enable host liboffloadmic by default. Otherwise
-# liboffloadmic is disabled by default.
-AC_ARG_ENABLE([liboffloadmic],
-AC_HELP_STRING([[--enable-liboffloadmic[=ARG]]],
- [build liboffloadmic @<:@ARG={no,host,target}@:>@]),
-[case "$enableval" in
- no | host | target)
- enable_liboffloadmic=$enableval ;;
- *)
- AC_MSG_ERROR([--enable-liboffloadmic=no/host/target]) ;;
-esac],
-[if test x"$enable_as_accelerator_for" != x; then
- case "${target}" in
- *-intelmic-* | *-intelmicemul-*)
- enable_liboffloadmic=target
- extra_liboffloadmic_configure_flags="--enable-liboffloadmic=target"
- ;;
- *)
- enable_liboffloadmic=no
- ;;
- esac
-else
- case "${enable_offload_targets}" in
- *-intelmic-* | *-intelmicemul-*)
- enable_liboffloadmic=host
- extra_liboffloadmic_configure_flags="--enable-liboffloadmic=host"
- ;;
- *)
- enable_liboffloadmic=no
- ;;
- esac
-fi])
-AC_SUBST(extra_liboffloadmic_configure_flags)
-
# Enable libgomp by default on hosted POSIX systems, and a few others.
if test x$enable_libgomp = x ; then
case "${target}" in
fi
fi
-# Disable liboffloadmic on unsupported systems.
-if test -d ${srcdir}/liboffloadmic; then
- if test x$enable_liboffloadmic != xno; then
- AC_MSG_CHECKING([for liboffloadmic support])
- if (srcdir=${srcdir}/liboffloadmic; \
- . ${srcdir}/configure.tgt; \
- test -n "$UNSUPPORTED")
- then
- AC_MSG_RESULT([no])
- noconfigdirs="$noconfigdirs target-liboffloadmic"
- else
- AC_MSG_RESULT([yes])
- fi
- fi
-fi
-
# Disable libitm on unsupported systems.
if test -d ${srcdir}/libitm; then
if test x$enable_libitm = x; then
cris-*-* | crisv32-*-*)
libgloss_dir=cris
;;
+ kvx-*-elf)
+ libgloss_dir=kvx-elf
+ ;;
+ kvx-*-mbr)
+ libgloss_dir=kvx-mbr
+ ;;
+ kvx-*-cos)
+ libgloss_dir=kvx-cos
+ ;;
hppa*-*-*)
libgloss_dir=pa
;;
i[[3456789]]86-*-rdos*)
noconfigdirs="$noconfigdirs gdb"
;;
+ kvx-*-*)
+ noconfigdirs="$noconfigdirs gdb gdbserver sim"
+ ;;
mmix-*-*)
noconfigdirs="$noconfigdirs gdb"
;;
alpha*-linux*)
host_makefile_frag="config/mh-alpha-linux"
;;
- hppa*-hp-hpux10*)
- host_makefile_frag="config/mh-pa-hpux10"
- ;;
hppa*-hp-hpux*)
host_makefile_frag="config/mh-pa"
;;
extra_linker_plugin_flags=)
AC_SUBST(extra_linker_plugin_flags)
+# Handle --enable-host-pie
+# If host PIE executables are the default (or must be forced on) for some host,
+# we must pass that configuration to the gcc directory.
+gcc_host_pie=
+AC_ARG_ENABLE(host-pie,
+[AS_HELP_STRING([--enable-host-pie],
+ [build position independent host executables])],
+[host_pie=$enableval
+ case $host in
+ *-*-darwin2*)
+ if test x$host_pie != xyes ; then
+ # for Darwin20+ this is required.
+ AC_MSG_WARN([PIE executables are required for the configured host, host-pie setting ignored.])
+ host_pie=yes
+ gcc_host_pie=--enable-host-pie
+ fi ;;
+ *) ;;
+ esac],
+[case $host in
+ *-*-darwin2*)
+ # Default to PIE (mandatory for aarch64).
+ host_pie=yes
+ gcc_host_pie=--enable-host-pie
+ ;;
+ *) host_pie=no ;;
+ esac])
+
+AC_SUBST(host_pie)
+AC_SUBST(gcc_host_pie)
+
# Enable --enable-host-shared.
# Checked early to determine whether jit is an 'all' language
AC_ARG_ENABLE(host-shared,
x86_64-*-darwin* | aarch64-*-darwin*)
if test x$host_shared != xyes ; then
# PIC is the default, and actually cannot be switched off.
- echo configure.ac: warning: PIC code is required for the configured target, host-shared setting ignored. 1>&2
+ AC_MSG_WARN([PIC code is required for the configured host; host-shared setting ignored.])
+ host_shared=yes
+ fi ;;
+ *-*-darwin*)
+ if test x$host_pie = xyes -a x$host_shared != xyes ; then
+ AC_MSG_WARN([PIC code is required for PIE host executables host-shared setting ignored.])
host_shared=yes
fi ;;
*) ;;
esac],
[case $host in
+ # 64B x86_64 and Aarch64 Darwin default to PIC.
x86_64-*-darwin* | aarch64-*-darwin*) host_shared=yes ;;
- *) host_shared=no ;;
+ # 32B and powerpc64 Darwin must use PIC to link PIE exes.
+ *-*-darwin*) host_shared=$host_pie ;;
+ *) host_shared=no;;
esac])
AC_SUBST(host_shared)
+if test x$host_shared = xyes; then
+ case $host in
+ *-*-darwin*)
+ # Since host shared is the default for 64b Darwin, and also enabled for
+ # host_pie, ensure that we present the PIE flag when host_pie is active.
+ if test x$host_pie = xyes; then
+ PICFLAG=-fPIE
+ fi
+ ;;
+ *)
+ PICFLAG=-fPIC
+ ;;
+ esac
+elif test x$host_pie = xyes; then
+ PICFLAG=-fPIE
+else
+ PICFLAG=
+fi
+
+AC_SUBST(PICFLAG)
+
# If we are building PIC/PIE host executables, and we are building dependent
# libs (e.g. GMP) in-tree those libs need to be configured to generate PIC
# code.
host_libs_picflag=
-if test "$host_shared" = "yes";then
+if test "$host_shared" = "yes" -o "$host_pie" = "yes"; then
host_libs_picflag='--with-pic'
fi
AC_SUBST(host_libs_picflag)
fi
esac
-# Disable libitm, libsanitizer, libvtv, liboffloadmic if we're not building C++
+# Disable libitm, libsanitizer, libvtv if we're not building C++
case ,${enable_languages}, in
*,c++,*)
# Disable libitm, libsanitizer if we're not building libstdc++
esac
;;
*)
- noconfigdirs="$noconfigdirs target-liboffloadmic target-libitm target-libsanitizer target-libvtv"
+ noconfigdirs="$noconfigdirs target-libitm target-libsanitizer target-libvtv"
;;
esac
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
+if test "x${enable_serial_build_configure}" = xyes || test "x${enable_serial_host_configure}" = xyes || test "x${enable_serial_target_configure}" = xyes; then
echo '# serdep.tmp' > serdep.tmp
+fi
olditem=
test "x${enable_serial_build_configure}" = xyes &&
for item in ${build_configdirs} ; do
AC_SUBST(CXXFLAGS)
AC_SUBST(GDC)
AC_SUBST(GDCFLAGS)
+GDCFLAGS=${GDCFLAGS-${CFLAGS}}
AC_SUBST(PKG_CONFIG_PATH)
GCC_PLUGIN_OPTION(PLUGIN_OPTION)
NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo)
NCN_STRICT_CHECK_TARGET_TOOLS(GDC_FOR_TARGET, gdc)
+NCN_STRICT_CHECK_TARGET_TOOLS(GM2_FOR_TARGET, gm2)
ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
[gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/], go)
GCC_TARGET_TOOL(gdc, GDC_FOR_TARGET, GDC,
[gcc/gdc -B$$r/$(HOST_SUBDIR)/gcc/], d)
+GCC_TARGET_TOOL(gm2, GM2_FOR_TARGET, GM2,
+ [gcc/gm2 -B$$r/$(HOST_SUBDIR)/gcc/], m2)
GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
+compare_exclusions="$compare_exclusions | gcc/m2/gm2-compiler-boot/M2Version*"
+compare_exclusions="$compare_exclusions | gcc/m2/gm2-compiler-boot/SYSTEM*"
+compare_exclusions="$compare_exclusions | gcc/m2/gm2version*"
case "$target" in
hppa*64*-*-hpux*) ;;
- hppa*-*-hpux*) compare_exclusions="$compare_exclusions | */libgcc/lib2funcs* | gcc/function-tests.o" ;;
powerpc*-ibm-aix*) compare_exclusions="$compare_exclusions | *libgomp*\$(objext)" ;;
esac
AC_SUBST(compare_exclusions)