# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2014
# Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# these library is used by various programs built for the build
# environment
#
-build_libs="build-libiberty"
+build_libs="build-libiberty build-libcpp"
# these tools are built for the build environment
build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
-#
+#f
host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl cloog libelf libiconv"
# these tools are built for the host environment
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
if test "$is_elf" = "yes"; then
# Check for target supported by gold.
case "${target}" in
- i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* | tilegx*-*-*)
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
+ | aarch64*-*-* | tilegx*-*-*)
configdirs="$configdirs gold"
if test x${ENABLE_GOLD} = xdefault; then
default_ld=gold
ENABLE_LIBSTDCXX=$enableval,
ENABLE_LIBSTDCXX=default)
[if test "${ENABLE_LIBSTDCXX}" = "no" ; then
- noconfigdirs="$noconfigdirs libstdc++-v3"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
fi]
# Save it here so that, even in case of --enable-libgcj, if the Java
;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
+ ;;
+esac
+
+# Disable the go frontend on systems where it is known to not work. Please keep
+# this in sync with contrib/config-list.mk.
+case "${target}" in
+*-*-darwin* | *-*-cygwin* | *-*-mingw* | *-*-aix*)
+ unsupported_languages="$unsupported_languages go"
+ ;;
esac
# Disable libgo for some systems where it is known to not work.
tic6x-*-*)
noconfigdirs="$noconfigdirs sim"
;;
- tilepro-*-* | tilegx-*-*)
+ tilepro*-*-* | tilegx*-*-*)
noconfigdirs="$noconfigdirs sim"
;;
v810-*-*)
*-mingw*)
host_makefile_frag="config/mh-mingw"
;;
+ alpha*-*-linux*)
+ host_makefile_frag="config/mh-alpha-linux"
+ ;;
hppa*-hp-hpux10*)
host_makefile_frag="config/mh-pa-hpux10"
;;
Equivalent to --with-isl-include=PATH/include
plus --with-isl-lib=PATH/lib])])
-# Treat either --without-cloog or --without-isl as a request to disable
+# Treat --without-isl as a request to disable
# GRAPHITE support and skip all following checks.
-if test "x$with_isl" != "xno" &&
- test "x$with_cloog" != "xno"; then
+if test "x$with_isl" != "xno"; then
# Check for ISL
dnl Provide configure switches and initialize islinc & isllibs
dnl with user input.
ISL_INIT_FLAGS
dnl The versions of ISL that work for Graphite
- ISL_CHECK_VERSION(0,10)
- if test "${gcc_cv_isl}" = no ; then
- ISL_CHECK_VERSION(0,11)
- if test "${gcc_cv_isl}" = no ; then
- ISL_CHECK_VERSION(0,12)
- fi
- fi
+ ISL_CHECK_VERSION()
dnl Only execute fail-action, if ISL has been requested.
ISL_IF_FAILED([
AC_MSG_ERROR([Unable to find a usable ISL. See config.log for details.])])
dnl with user input.
CLOOG_INIT_FLAGS
dnl The versions of CLooG that work for Graphite.
- CLOOG_CHECK_VERSION(0,17,0)
- if test "${gcc_cv_cloog}" = no ; then
- CLOOG_CHECK_VERSION(0,18,0)
- fi
+ CLOOG_CHECK_VERSION(0,18,1)
dnl Only execute fail-action, if CLooG has been requested.
CLOOG_IF_FAILED([
fi
fi
-# If either the ISL or the CLooG check failed, disable builds of in-tree
-# variants of both
+# If the ISL check failed, disable builds of in-tree
+# variants of both ISL and CLooG
if test "x$with_isl" = xno ||
- test "x$with_cloog" = xno ||
- test "x$gcc_cv_cloog" = xno ||
test "x$gcc_cv_isl" = xno; then
noconfigdirs="$noconfigdirs cloog isl"
islinc=
clooglibs=
fi
+# If the CLooG check failed, disable builds of in-tree
+# variants of CLooG
+if test "x$with_cloog" = xno ||
+ test "x$gcc_cv_cloog" = xno; then
+ noconfigdirs="$noconfigdirs cloog isl"
+ clooginc=
+ clooglibs=
+fi
+
+AC_SUBST(isllibs)
AC_SUBST(islinc)
AC_SUBST(clooglibs)
AC_SUBST(clooginc)
-
# Check for LTO support.
AC_ARG_ENABLE(lto,
[AS_HELP_STRING([--enable-lto], [enable link time optimization support])],
esac
])
+AC_ARG_ENABLE(linker-plugin-configure-flags,
+ [AS_HELP_STRING([[--enable-linker-plugin-configure-flags=FLAGS]],
+ [additional flags for configuring linker plugins @<:@none@:>@])],
+ extra_linker_plugin_configure_flags=$enableval,
+ extra_linker_plugin_configure_flags=)
+AC_SUBST(extra_linker_plugin_configure_flags)
+AC_ARG_ENABLE(linker-plugin-flags,
+ [AS_HELP_STRING([[--enable-linker-plugin-flags=FLAGS]],
+ [additional flags for configuring and building linker plugins @<:@none@:>@])],
+ extra_linker_plugin_flags=$enableval,
+ extra_linker_plugin_flags=)
+AC_SUBST(extra_linker_plugin_flags)
+
# By default, C and C++ are the only stage 1 languages.
stage1_languages=,c,
new_enable_languages=,c,
# If LTO is enabled, add the LTO front end.
- extra_host_libiberty_configure_flags=
if test "$enable_lto" = "yes" ; then
case ,${enable_languages}, in
*,lto,*) ;;
esac
if test "${build_lto_plugin}" = "yes" ; then
configdirs="$configdirs lto-plugin"
- extra_host_libiberty_configure_flags=--enable-shared
fi
fi
- AC_SUBST(extra_host_libiberty_configure_flags)
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
;;
esac
-# Disable libitm, libsanitizer, libvtv if we're not building C++
+# Disable libcilkrts, libitm, libsanitizer, libvtv if we're not building C++
case ,${enable_languages}, in
- *,c++,*) ;;
+ *,c++,*)
+ # Disable libcilkrts, libitm, libsanitizer if we're not building libstdc++
+ case "${noconfigdirs}" in
+ *target-libstdc++-v3*)
+ noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer"
+ ;;
+ *) ;;
+ esac
+ ;;
*)
noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer target-libvtv"
;;
fi
done
+# libiberty-linker-plugin is special: it doesn't have its own source directory,
+# so we have to add it after the preceding checks.
+if test x"$extra_linker_plugin_flags$extra_linker_plugin_configure_flags" != x
+then
+ case " $configdirs " in
+ *" libiberty "*)
+ # If we can build libiberty, we can also build libiberty-linker-plugin.
+ configdirs="$configdirs libiberty-linker-plugin"
+ extra_linker_plugin_configure_flags="$extra_linker_plugin_configure_flags \
+ --with-libiberty=../libiberty-linker-plugin";;
+ *)
+ AC_MSG_ERROR([libiberty missing]);;
+ esac
+fi
+
+# Sometimes we have special requirements for the host libiberty.
+extra_host_libiberty_configure_flags=
+case " $configdirs " in
+ *" lto-plugin "* | *" libcc1 "*)
+ # When these are to be built as shared libraries, the same applies to
+ # libiberty.
+ extra_host_libiberty_configure_flags=--enable-shared
+ ;;
+esac
+AC_SUBST(extra_host_libiberty_configure_flags)
+
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
+ nios2-*-elf*)
+ target_makefile_frag="config/mt-nios2-elf"
+ ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
GCC_SHLIB_SUBDIR=
fi
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case $enable_bootstrap in
+ yes)
+ bootstrap_suffix=bootstrap
+ BUILD_CONFIG=bootstrap-debug
+ ;;
+ no)
+ bootstrap_suffix=no-bootstrap
+ BUILD_CONFIG=
+ ;;
+esac
+
+AC_MSG_CHECKING(for default BUILD_CONFIG)
+
+AC_ARG_WITH([build-config],
+ [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
+ [use config/NAME.mk build configuration])],
+ [case $with_build_config in
+ yes) with_build_config= ;;
+ no) with_build_config= BUILD_CONFIG= ;;
+ esac])
+
+if test "x${with_build_config}" != x; then
+ BUILD_CONFIG=$with_build_config
+else
+ case $BUILD_CONFIG in
+ bootstrap-debug)
+ if echo "int f (void) { return 0; }" > conftest.c &&
+ ${CC} -c conftest.c &&
+ mv conftest.o conftest.o.g0 &&
+ ${CC} -c -g conftest.c &&
+ mv conftest.o conftest.o.g &&
+ ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
+ :
+ else
+ BUILD_CONFIG=
+ fi
+ rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
+ ;;
+ esac
+fi
+AC_MSG_RESULT($BUILD_CONFIG)
+AC_SUBST(BUILD_CONFIG)
+
+# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
+AC_MSG_CHECKING([for --enable-vtable-verify])
+AC_ARG_ENABLE(vtable-verify,
+[ --enable-vtable-verify Enable vtable verification feature ],
+[case "$enableval" in
+ yes) enable_vtable_verify=yes ;;
+ no) enable_vtable_verify=no ;;
+ *) enable_vtable_verify=no;;
+ esac],
+[enable_vtable_verify=no])
+AC_MSG_RESULT($enable_vtable_verify)
+
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+bootstrap_fixincludes=no
# If we are building libgomp, bootstrap it.
if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
fi
-# If we are building libsanitizer, bootstrap it.
-if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1 ; then
- bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+# If we are building libsanitizer and $BUILD_CONFIG contains bootstrap-asan
+# or bootstrap-ubsan, bootstrap it.
+if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
+ case "$BUILD_CONFIG" in
+ *bootstrap-asan* | *bootstrap-ubsan* )
+ bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+ bootstrap_fixincludes=yes
+ ;;
+ esac
fi
-# If we are building libvtv, bootstrap it.
-if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 ; then
+# If we are building libvtv and --enable-vtable-verify, bootstrap it.
+if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 &&
+ test "$enable_vtable_verify" != no; then
bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
fi
;;
esac
-# Adjust the toplevel makefile according to whether bootstrap was selected.
-case $enable_bootstrap in
- yes)
- bootstrap_suffix=bootstrap
- BUILD_CONFIG=bootstrap-debug
- ;;
- no)
- bootstrap_suffix=no-bootstrap
- BUILD_CONFIG=
- ;;
-esac
-
-AC_MSG_CHECKING(for default BUILD_CONFIG)
-
-AC_ARG_WITH([build-config],
- [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
- [use config/NAME.mk build configuration])],
- [case $with_build_config in
- yes) with_build_config= ;;
- no) with_build_config= BUILD_CONFIG= ;;
- esac])
-
-if test "x${with_build_config}" != x; then
- BUILD_CONFIG=$with_build_config
-else
- case $BUILD_CONFIG in
- bootstrap-debug)
- if echo "int f (void) { return 0; }" > conftest.c &&
- ${CC} -c conftest.c &&
- mv conftest.o conftest.o.g0 &&
- ${CC} -c -g conftest.c &&
- mv conftest.o conftest.o.g &&
- ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
- :
- else
- BUILD_CONFIG=
- fi
- rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
- ;;
- esac
-fi
-AC_MSG_RESULT($BUILD_CONFIG)
-AC_SUBST(BUILD_CONFIG)
-
extrasub_build=
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
fi
done
fi
+ case ${module},${bootstrap_fixincludes} in
+ fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
+ *) host_bootstrap_suffix=$bootstrap_suffix ;;
+ esac
extrasub_host="$extrasub_host
/^@if $module\$/d
/^@endif $module\$/d
-/^@if $module-$bootstrap_suffix\$/d
-/^@endif $module-$bootstrap_suffix\$/d"
+/^@if $module-$host_bootstrap_suffix\$/d
+/^@endif $module-$host_bootstrap_suffix\$/d"
done
extrasub_target=
for module in ${target_configdirs} ; do
changequote([,])
case $lib in
- mpc | mpfr | gmp | cloog)
+ mpc | mpfr | gmp | isl | cloog)
# If we're processing --with-$lib, --with-$lib-include or
# --with-$lib-lib, for one of the libs above, and target is
# different from host, don't pass the current argument to any
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
-# desired.
-build_configargs="$build_configargs --cache-file=../config.cache ${baseargs}"
+# desired. We can't even use the same cache file for all build-side
+# libraries, as they're compiled differently; some with C, some with
+# C++ or with different feature-enabling options.
+build_configargs="$build_configargs --cache-file=./config.cache ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in