Correct the copyright year. It is not 2006 or 2007.

[gcc.git] / configure.ac

diff --git a/configure.ac b/configure.ac
index caff7e5af132c96af4413b19b7231fc5a385b6cd..794a4191d56b2f6001385fd0f55257f0225fe1a1 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -603,7 +603,8 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
     ;;
   bfin-*-*)
-    noconfigdirs="$noconfigdirs gdb"
+    unsupported_languages="$unsupported_languages java"
+    noconfigdirs="$noconfigdirs target-boehm-gc gdb"
     if test x${is_cross_compiler} != xno ; then
       target_configdirs="${target_configdirs} target-bsp target-cygmon"
     fi
@@ -1762,10 +1763,13 @@ if test -d ${srcdir}/gcc; then
            new_enable_languages="${new_enable_languages}${language},"
             potential_languages="${potential_languages}${language},"
            missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
-           case ${boot_language} in
-             yes)
+           case "${boot_language}:,$enable_stage1_languages," in
+             yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
                # Add to (comma-separated) list of stage 1 languages.
-               stage1_languages="${stage1_languages}${language},"
+               case ",$stage1_languages," in
+                 *,$language,* | ,yes, | ,all,) ;;
+                 *) stage1_languages="${stage1_languages}${language}," ;;
+               esac
                # We need to bootstrap any supporting libraries.
                bootstrap_target_libs="${bootstrap_target_libs}${target_libs},"
                ;;
@@ -2410,12 +2414,13 @@ INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 # configuration, so that the top-level Makefile reconfigures them,
 # like we used to do when configure itself was recursive.
 
-# Loop over modules.  $extrasub must be used with care, limiting as
-# much as possible the usage of range addresses.  That's because autoconf
-# splits the sed script to overcome limits in the number of commands,
-# and relying on carefully-timed sed passes may turn out to be very hard
-# to maintain later.  In this particular case, you just have to be careful
-# not to nest @if/@endif pairs, because configure will not warn you at all.
+# Loop over modules.  We used to use the "$extrasub" feature from Autoconf
+# but now we're fixing up the Makefile ourselves with the additional
+# commands passed to AC_CONFIG_FILES.  Use separate variables
+# extrasub-{build,host,target} not because there is any reason to split
+# the substitutions up that way, but only to remain below the limit of
+# 99 commands in a script, for HP-UX sed.
+# Do not nest @if/@endif pairs, because configure will not warn you at all.
 
 AC_ARG_ENABLE([bootstrap],
 [  --enable-bootstrap      enable bootstrapping @<:@yes if native build@:>@],,
@@ -2458,6 +2463,20 @@ case "$have_compiler:$host:$target:$enable_bootstrap" in
     ;;
 esac
 
+case ",$enable_languages,:$ENABLE_BUILD_WITH_CXX:$enable_bootstrap" in
+  *,c++,*:yes:yes) ;;
+  *:yes:yes)
+    AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx requires c++ in --enable-languages])
+    ;;
+esac
+
+case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
+  yes:yes:*\ gold\ *:*,c++,*) ;;
+  yes:yes:*\ gold\ *:*)
+    AC_MSG_ERROR([in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages])
+    ;;
+esac
+
 # Adjust the toplevel makefile according to whether bootstrap was selected.
 case $enable_bootstrap in
   yes)
@@ -2471,6 +2490,15 @@ case $enable_bootstrap in
 esac
 
 AC_MSG_CHECKING(for default BUILD_CONFIG)
+
+AC_ARG_WITH([build-config],
+  [--with-build-config='NAME NAME2...'
+                          Use config/NAME.mk build configuration],
+  [case $with_build_config in
+   yes) with_build_config= ;;
+   no) with_build_config= BUILD_CONFIG= ;;
+   esac])
+
 if test "x${with_build_config}" != x; then
   BUILD_CONFIG=$with_build_config
 else
@@ -2493,18 +2521,20 @@ fi
 AC_MSG_RESULT($BUILD_CONFIG)
 AC_SUBST(BUILD_CONFIG)
 
+extrasub_build=
 for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${build_subdir}/${module}/Makefile; then
     echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
     rm -f ${build_subdir}/${module}/Makefile
   fi
-  extrasub="$extrasub
+  extrasub_build="$extrasub_build
 /^@if build-$module\$/d
 /^@endif build-$module\$/d
 /^@if build-$module-$bootstrap_suffix\$/d
 /^@endif build-$module-$bootstrap_suffix\$/d"
 done
+extrasub_host=
 for module in ${configdirs} ; do
   if test -z "${no_recursion}"; then
     for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
@@ -2514,12 +2544,13 @@ for module in ${configdirs} ; do
       fi
     done
   fi
-  extrasub="$extrasub
+  extrasub_host="$extrasub_host
 /^@if $module\$/d
 /^@endif $module\$/d
 /^@if $module-$bootstrap_suffix\$/d
 /^@endif $module-$bootstrap_suffix\$/d"
 done
+extrasub_target=
 for module in ${target_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${target_subdir}/${module}/Makefile; then
@@ -2533,14 +2564,15 @@ for module in ${target_configdirs} ; do
     *) target_bootstrap_suffix=no-bootstrap ;;
   esac
 
-  extrasub="$extrasub
+  extrasub_target="$extrasub_target
 /^@if target-$module\$/d
 /^@endif target-$module\$/d
 /^@if target-$module-$target_bootstrap_suffix\$/d
 /^@endif target-$module-$target_bootstrap_suffix\$/d"
 done
 
-extrasub="$extrasub
+# Do the final fixup along with target modules.
+extrasub_target="$extrasub_target
 /^@if /,/^@endif /d"
 
 # Create the serialization dependencies.  This uses a temporary file.
@@ -3158,4 +3190,12 @@ case "$target" in
 esac
 AC_SUBST(compare_exclusions)
 
-AC_OUTPUT(Makefile)
+AC_CONFIG_FILES([Makefile],
+  [sed "$extrasub_build" Makefile |
+   sed "$extrasub_host" |
+   sed "$extrasub_target" > mf$$
+   mv -f mf$$ Makefile],
+  [extrasub_build="$extrasub_build"
+   extrasub_host="$extrasub_host"
+   extrasub_target="$extrasub_target"])
+AC_OUTPUT