# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
-# 2014, 2015, 2016 Free Software Foundation, Inc.
+# 2014, 2015, 2016, 2019 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
m4_include([config/isl.m4])
AC_INIT(move-if-change)
-AC_PREREQ(2.64)
AC_DISABLE_OPTION_CHECKING
progname=$0
# these libraries are used by various programs built for the host environment
#f
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv libctf"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gdbserver gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
target-libobjc \
target-libada \
target-libgo \
- target-libphobos"
+ target-libphobos \
+ target-zlib"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
;;
*-*-darwin* | *-*-aix*)
;;
- nvptx*-*-*)
+ nvptx*-*-* | amdgcn*-*-*)
;;
*)
noconfigdirs="$noconfigdirs target-libgomp"
# No hosted I/O support.
noconfigdirs="$noconfigdirs target-libssp"
;;
+ bpf-*-*)
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
powerpc-*-aix* | rs6000-*-aix*)
noconfigdirs="$noconfigdirs target-libssp"
;;
+ pru-*-*)
+ # No hosted I/O support.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
rl78-*-*)
# libssp uses a misaligned load to trigger a fault, but the RL78
# doesn't fault for those - instead, it gives a build-time error
avr-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
+ bpf-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
ft32-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
esac
fi
+# Disable C++ on systems where it is known to not work.
+# For testing, you can override this with --enable-languages=c++.
+case ,${enable_languages}, in
+ *,c++,*)
+ ;;
+ *)
+ case "${target}" in
+ bpf-*-*)
+ unsupported_languages="$unsupported_languages c++"
+ ;;
+ esac
+ ;;
+esac
+
+# Disable Objc on systems where it is known to not work.
+# For testing, you can override this with --enable-languages=objc.
+case ,${enable_languages}, in
+ *,objc,*)
+ ;;
+ *)
+ case "${target}" in
+ bpf-*-*)
+ unsupported_languages="$unsupported_languages objc"
+ ;;
+ esac
+ ;;
+esac
+
+# Disable D on systems where it is known to not work.
+# For testing, you can override this with --enable-languages=d.
+case ,${enable_languages}, in
+ *,d,*)
+ ;;
+ *)
+ case "${target}" in
+ *-*-darwin*)
+ unsupported_languages="$unsupported_languages d"
+ ;;
+ bpf-*-*)
+ unsupported_languages="$unsupported_languages d"
+ ;;
+ esac
+ ;;
+esac
+
+# Disable libphobos on unsupported systems.
+# For testing, you can override this with --enable-libphobos.
+if test -d ${srcdir}/libphobos; then
+ if test x$enable_libphobos = x; then
+ AC_MSG_CHECKING([for libphobos support])
+ if (srcdir=${srcdir}/libphobos; \
+ . ${srcdir}/configure.tgt; \
+ test "$LIBPHOBOS_SUPPORTED" != "yes")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libphobos"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
# Disable Fortran for some systems.
case "${target}" in
mmix-*-*)
# See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
unsupported_languages="$unsupported_languages fortran"
;;
+ bpf-*-*)
+ unsupported_languages="$unsupported_languages fortran"
+ ;;
esac
# Disable libffi for some systems.
arm*-*-symbianelf*)
noconfigdirs="$noconfigdirs target-libffi"
;;
+ bpf-*-*)
+ noconfigdirs="$noconfigdirs target-libffi"
+ ;;
cris-*-* | crisv32-*-*)
case "${target}" in
*-*-linux*)
# Disable the go frontend on systems where it is known to not work. Please keep
# this in sync with contrib/config-list.mk.
case "${target}" in
-*-*-darwin* | *-*-cygwin* | *-*-mingw*)
+*-*-darwin* | *-*-cygwin* | *-*-mingw* | bpf-* )
unsupported_languages="$unsupported_languages go"
;;
esac
+# Only allow gdbserver on some systems.
+if test -d ${srcdir}/gdbserver; then
+ if test x$enable_gdbserver = x; then
+ AC_MSG_CHECKING([for gdbserver support])
+ if (srcdir=${srcdir}/gdbserver; \
+ . ${srcdir}/configure.srv; \
+ test -n "$UNSUPPORTED")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs gdbserver"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
# Disable libgo for some systems where it is known to not work.
# For testing, you can easily override this with --enable-libgo.
if test x$enable_libgo = x; then
*-*-cygwin* | *-*-mingw*)
noconfigdirs="$noconfigdirs target-libgo"
;;
+ bpf-*-*)
+ noconfigdirs="$noconfigdirs target-libgo"
+ ;;
esac
fi
powerpc*-*-*)
libgloss_dir=rs6000
;;
+ pru-*-*)
+ libgloss_dir=pru
+ ;;
sparc*-*-*)
libgloss_dir=sparc
;;
sparc-*-sunos4*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ bpf-*-*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
*-*-aix*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
+ amdgcn*-*-*)
+ ;;
arm-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ bpf-*-*)
+ noconfigdirs="$noconfigdirs target-libobjc target-libbacktrace"
+ ;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
;;
LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
AC_MSG_CHECKING([whether g++ accepts -static-libstdc++ -static-libgcc])
AC_LANG_PUSH(C++)
- AC_LINK_IFELSE([
+ AC_LINK_IFELSE([AC_LANG_SOURCE([
#if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
#error -static-libstdc++ not implemented
#endif
-int main() {}],
+int main() {}])],
[AC_MSG_RESULT([yes]); have_static_libs=yes],
[AC_MSG_RESULT([no])])
AC_LANG_POP(C++)
AC_MSG_CHECKING([for the correct version of mpfr.h])
AC_TRY_COMPILE([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(3,1,0)
choke me
#endif
], [AC_TRY_COMPILE([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,2)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(3,1,6)
choke me
#endif
], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
int t;
mpfr_init (n);
mpfr_init (x);
- mpfr_atan2 (n, n, x, GMP_RNDN);
- mpfr_erfc (n, x, GMP_RNDN);
- mpfr_subnormalize (x, t, GMP_RNDN);
+ mpfr_atan2 (n, n, x, MPFR_RNDN);
+ mpfr_erfc (n, x, MPFR_RNDN);
+ mpfr_subnormalize (x, t, MPFR_RNDN);
mpfr_clear(n);
mpfr_clear(x);
mpc_init2 (c, 53);
# The library versions listed in the error message below should match
# the HARD-minimums enforced above.
if test x$have_gmp != xyes; then
- AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
+ AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 3.1.0+ and MPC 0.8.0+.
Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
their locations. Source code for these libraries can be found at
their respective hosting sites as well as at
-ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also
+https://gcc.gnu.org/pub/gcc/infrastructure/. See also
http://gcc.gnu.org/install/prerequisites.html for additional info. If
you obtained GMP, MPFR and/or MPC from a vendor distribution package,
make sure that you have installed both the libraries and the header
[stage1_libs=])
AC_SUBST(stage1_libs)
+# Whether or not to use -static-libstdc++ and -static-libgcc. The
+# default is yes if gcc is being built; no otherwise. The reason for
+# this default is that gdb is sometimes linked against GNU Source
+# Highlight, which is a shared library that uses C++ exceptions. In
+# this case, -static-libstdc++ will cause crashes.
+AC_ARG_WITH(static-standard-libraries,
+[AS_HELP_STRING([--with-static-standard-libraries],
+ [use -static-libstdc++ and -static-libgcc (default=auto)])],
+[], [with_static_standard_libraries=auto])
+if test "$with_static_standard_libraries" = auto; then
+ with_static_standard_libraries=$have_compiler
+fi
+
# Linker flags to use for stage1 or when not bootstrapping.
AC_ARG_WITH(stage1-ldflags,
[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
# In stage 1, default to linking libstdc++ and libgcc statically with GCC
# if supported. But if the user explicitly specified the libraries to use,
# trust that they are doing what they want.
- if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
+ if test "$with_static_standard_libraries" = yes -a "$stage1_libs" = "" \
+ -a "$have_static_libs" = yes; then
stage1_ldflags="-static-libstdc++ -static-libgcc"
fi])
AC_SUBST(stage1_ldflags)
CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+# gdb and gdbserver depend on gnulib and gdbsupport, but as nothing
+# else does, only include them if one of these is built. The Makefile
+# provides the ordering, so it's enough here to add to the list.
+case " ${configdirs} " in
+ *\ gdb\ *)
+ configdirs="${configdirs} gnulib gdbsupport"
+ ;;
+ *\ gdbserver\ *)
+ configdirs="${configdirs} gnulib gdbsupport"
+ ;;
+esac
+
# Strip out unwanted targets.
# While at that, we remove Makefiles if we were started for recursive
NCN_STRICT_CHECK_TOOLS(WINDMC, windmc)
NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
+NCN_STRICT_CHECK_TOOLS(OTOOL, otool)
NCN_STRICT_CHECK_TOOLS(READELF, readelf)
AC_SUBST(CC)
AC_SUBST(CXX)
ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJCOPY_FOR_TARGET, objcopy)
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
+ACX_CHECK_INSTALLED_TARGET_TOOL(OTOOL_FOR_TARGET, otool)
ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
ACX_CHECK_INSTALLED_TARGET_TOOL(READELF_FOR_TARGET, readelf)
ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
GCC_TARGET_TOOL(objcopy, OBJCOPY_FOR_TARGET, OBJCOPY, [binutils/objcopy])
GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
+GCC_TARGET_TOOL(otool, OTOOL_FOR_TARGET, OTOOL)
GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
GCC_TARGET_TOOL(readelf, READELF_FOR_TARGET, READELF, [binutils/readelf])
GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
case "$target" in
hppa*64*-*-hpux*) ;;
- hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/* | gcc/function-tests.o" ;;
- powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
+ hppa*-*-hpux*) compare_exclusions="$compare_exclusions | */libgcc/lib2funcs* | gcc/function-tests.o" ;;
+ powerpc*-ibm-aix*) compare_exclusions="$compare_exclusions | *libgomp*\$(objext)" ;;
esac
AC_SUBST(compare_exclusions)
projects / gcc.git / blobdiff