# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
# Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
AC_PROG_SED
AC_PROG_AWK
-### we might need to use some other shell than /bin/sh for running subshells
-### If we are on Windows, search for the shell. This will permit people
-### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
-### without also having to set CONFIG_SHELL. This code will work when
-### using bash, which sets OSTYPE.
-case "${OSTYPE}" in
-*win32*)
- if test x${CONFIG_SHELL} = x ; then
- if test ! -f /bin/sh ; then
- if test x${SHELL} != x && test -f ${SHELL} ; then
- CONFIG_SHELL=${SHELL}
- export CONFIG_SHELL
- else
- for prog in sh sh.exe bash bash.exe; do
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$prog; then
- CONFIG_SHELL=$dir/$prog
- export CONFIG_SHELL
- break
- fi
- done
- IFS="$save_ifs"
- test -n "${CONFIG_SHELL}" && break
- done
- fi
- fi
- fi
- ;;
-esac
-
-config_shell=${CONFIG_SHELL-/bin/sh}
-
-moveifchange=${srcdir}/move-if-change
-
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# We pass INSTALL explicitly to sub-makes. Make sure that it is not
build_libs="build-libiberty"
# these tools are built for the build environment
-build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-zlib \
- target-qthreads \
target-libjava"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
-#
+# Note that libiberty is not a target library.
target_libraries="target-libgcc \
- target-libiberty \
target-libgloss \
target-newlib \
target-libgomp \
+ target-libitm \
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
# run only in the target environment
#
# note: any program that *uses* libraries that are in the "target_libraries"
-# list belongs in this list. those programs are also very likely
-# candidates for the "native_only" list which follows
+# list belongs in this list.
#
-target_tools="target-examples target-groff target-gperf target-rda"
+target_tools="target-rda"
################################################################################
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
-# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
-
-# Similarly, some are only suitable for cross toolchains.
+# Some are only suitable for cross toolchains.
# Remove these if host=target.
cross_only="target-libgloss target-newlib target-opcodes"
case $is_cross_compiler in
no) skipdirs="${skipdirs} ${cross_only}" ;;
- yes) skipdirs="${skipdirs} ${native_only}" ;;
esac
# If both --with-headers and --with-libs are specified, default to
case "${target}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
- | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
+ | *-*-solaris2* | *-*-nto*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
# exist yet.
case "${host}" in
- hppa*64*-*-*)
- noconfigdirs="$noconfigdirs byacc"
- ;;
i[[3456789]]86-*-msdosdjgpp*)
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
- ;;
- x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
- ;;
- i[[3456789]]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
- ;;
- *-*-cygwin*)
- noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
- ;;
- *-*-netbsd*)
- noconfigdirs="$noconfigdirs rcs"
+ noconfigdirs="$noconfigdirs tcl tk itcl"
;;
esac
;;
esac
+AC_ARG_ENABLE(static-libjava,
+[AS_HELP_STRING([[--enable-static-libjava[=ARG]]],
+ [build static libjava @<:@default=no@:>@])],
+ENABLE_STATIC_LIBJAVA=$enableval,
+ENABLE_STATIC_LIBJAVA=no)
+enable_static_libjava=
+if test "${ENABLE_STATIC_LIBJAVA}" = "yes" ; then
+ enable_static_libjava=yes
+fi
+
+if test x$enable_static_libjava != xyes ; then
+ EXTRA_CONFIGARGS_LIBJAVA=--disable-static
+fi
+AC_SUBST(EXTRA_CONFIGARGS_LIBJAVA)
# Disable libmudflap on some systems.
if test x$enable_libmudflap = x ; then
case "${target}" in
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
;;
- *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+ *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
;;
- *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+ *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
;;
*-*-darwin* | *-*-aix*)
;;
esac
fi
+# Disable libitm on unsupported systems.
+if test -d ${srcdir}/libitm; then
+ if test x$enable_libitm = x; then
+ AC_MSG_CHECKING([for libitm support])
+ if (srcdir=${srcdir}/libitm; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libitm"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
+# Disable libssp for some systems.
+case "${target}" in
+ avr-*-*)
+ # No hosted I/O support.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+ powerpc-*-aix* | rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+ rl78-*-*)
+ # libssp uses a misaligned load to trigger a fault, but the RL78
+ # doesn't fault for those - instead, it gives a build-time error
+ # for explicit misaligned loads.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+esac
+
+# Disable libstdc++-v3 for some systems.
+case "${target}" in
+ *-*-vxworks*)
+ # VxWorks uses the Dinkumware C++ library.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ arm*-wince-pe*)
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+esac
+
+# Disable Fortran for some systems.
+case "${target}" in
+ mmix-*-*)
+ # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
+ unsupported_languages="$unsupported_languages fortran"
+ ;;
+esac
+
+# Disable Java if libffi is not supported.
+case "${target}" in
+ alpha*-*-*)
+ ;;
+ arm*-*-*)
+ ;;
+ cris-*-*)
+ ;;
+ frv-*-*)
+ ;;
+ hppa*-*-linux*)
+ ;;
+ hppa*-*-hpux*)
+ ;;
+ i?86-*-*)
+ ;;
+ ia64*-*-*)
+ ;;
+ m32r*-*-*)
+ ;;
+ m68k-*-*)
+ ;;
+ mips-sgi-irix6.* | mips*-*-rtems*)
+ ;;
+ mips*-*-linux*)
+ ;;
+ powerpc*-*-linux*)
+ ;;
+ powerpc-*-darwin*)
+ ;;
+ powerpc-*-aix* | rs6000-*-aix*)
+ ;;
+ powerpc-*-freebsd*)
+ ;;
+ powerpc64-*-freebsd*)
+ ;;
+ powerpc*-*-rtems*)
+ ;;
+ s390-*-* | s390x-*-*)
+ ;;
+ sh-*-* | sh[[34]]*-*-*)
+ ;;
+ sh64-*-* | sh5*-*-*)
+ ;;
+ sparc*-*-*)
+ ;;
+ x86_64-*-*)
+ ;;
+ *-*-*)
+ unsupported_languages="$unsupported_languages java"
+ ;;
+esac
+
+# Disable Java, libgcj or related libraries for some systems.
+case "${target}" in
+ powerpc-*-darwin*)
+ ;;
+ i[[3456789]]86-*-darwin*)
+ ;;
+ x86_64-*-darwin[[912]]*)
+ ;;
+ *-*-darwin*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-rtems*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-uclinux*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ alpha*-*-*vms*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ arm-wince-pe)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ arm*-*-symbianelf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ bfin-*-*)
+ noconfigdirs="$noconfigdirs target-boehm-gc"
+ ;;
+ cris-*-* | crisv32-*-*)
+ unsupported_languages="$unsupported_languages java"
+ case "${target}" in
+ *-*-linux*)
+ ;;
+ *) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
+ esac
+ ;;
+ hppa*64*-*-linux*)
+ # In this case, it's because the hppa64-linux target is for
+ # the kernel only at this point and has no libc, and thus no
+ # headers, crt*.o, etc., all of which are needed by these.
+ unsupported_languages="$unsupported_languages java"
+ ;;
+ hppa*64*-*-hpux*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ hppa*-hp-hpux11*)
+ ;;
+ hppa*-*-hpux*)
+ # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+ # build on HP-UX 10.20.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ ia64*-*-*vms*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ i[[3456789]]86-w64-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ i[[3456789]]86-*-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ x86_64-*-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ mmix-*-*)
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc"
+ ;;
+ powerpc-*-aix*)
+ # copied from rs6000-*-* entry
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ mips*-*-irix6*)
+ # Linking libjava exceeds command-line length limits on at least
+ # IRIX 6.2, but not on IRIX 6.5.
+ # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+ # <oldham@codesourcery.com>
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-lynxos*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+esac
+
# Default libgloss CPU subdirectory.
libgloss_dir="$target_cpu"
+case "${target}" in
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ libgloss_dir=wince
+ ;;
+ arm*-*-*)
+ libgloss_dir=arm
+ ;;
+ cris-*-* | crisv32-*-*)
+ libgloss_dir=cris
+ ;;
+ hppa*-*-*)
+ libgloss_dir=pa
+ ;;
+ i[[3456789]]86-*-*)
+ libgloss_dir=i386
+ ;;
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ libgloss_dir=m68hc11
+ ;;
+ m68*-*-* | fido-*-*)
+ libgloss_dir=m68k
+ ;;
+ mips*-*-*)
+ libgloss_dir=mips
+ ;;
+ powerpc*-*-*)
+ libgloss_dir=rs6000
+ ;;
+ sparc*-*-*)
+ libgloss_dir=sparc
+ ;;
+esac
+
+# Disable newlib and libgloss for various target OSes.
+case "${target}" in
+ alpha*-dec-osf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ i[[3456789]]86-*-linux*)
+ # This section makes it possible to build newlib natively on linux.
+ # If we are using a cross compiler then don't configure newlib.
+ if test x${is_cross_compiler} != xno ; then
+ noconfigdirs="$noconfigdirs target-newlib"
+ fi
+ noconfigdirs="$noconfigdirs target-libgloss"
+ # If we are not using a cross compiler, do configure newlib.
+ # Note however, that newlib will only be configured in this situation
+ # if the --with-newlib option has been given, because otherwise
+ # 'target-newlib' will appear in skipdirs.
+ ;;
+ i[[3456789]]86-*-rdos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ sh*-*-pe|mips*-*-pe|arm-wince-pe)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ sparc-*-sunos4*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-aix*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-beos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-chorusos)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-dragonfly*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-lynxos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-mingw*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-netbsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-uclinux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+esac
+
case "${target}" in
*-*-chorusos)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
*-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
- noconfigdirs="$noconfigdirs ${libgcj}"
;;
- *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ *-*-dragonfly*)
;;
*-*-freebsd*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
&& test -f /usr/local/include/gmp.h; then
with_gmp=/usr/local
fi
-
- # Skip some stuff that's unsupported on some FreeBSD configurations.
- case "${target}" in
- i*86-*-*) ;;
- alpha*-*-*) ;;
- x86_64-*-*) ;;
- *)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
- skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
- skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
- skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
noconfigdirs="$noconfigdirs target-libgloss"
;;
*-*-netbsd*)
- # Skip some stuff on all NetBSD configurations.
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
-
- # Skip some stuff that's unsupported on some NetBSD configurations.
- case "${target}" in
- i*86-*-netbsdelf*) ;;
- arm*-*-netbsdelf*) ;;
- *)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
;;
*-*-netware*)
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
- skipdirs="${skipdirs} target-libiberty"
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
+ noconfigdirs="$noconfigdirs target-rda"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
- # newlib is not 64 bit ready. I'm not sure about fileutils.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
- ;;
- alpha*-*-linux*)
- # newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
alpha*-*-*)
# newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- sh-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
- noconfigdirs="$noconfigdirs ${libgcj}"
- noconfigdirs="$noconfigdirs target-examples"
- noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
- noconfigdirs="$noconfigdirs expect dejagnu"
- # the C++ libraries don't build on top of CE's C libraries
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- noconfigdirs="$noconfigdirs target-newlib"
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb and readline
- *) noconfigdirs="$noconfigdirs gdb readline"
- ;;
- esac
- libgloss_dir=wince
- ;;
- arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;;
- arm-*-coff)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=arm
- ;;
- arm-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- libgloss_dir=arm
- ;;
- arm*-*-linux-gnueabi)
- noconfigdirs="$noconfigdirs target-qthreads"
- case ${with_newlib} in
- no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- esac
- libgloss_dir=arm
- ;;
- arm*-*-symbianelf*)
- noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
- libgloss_dir=arm
- ;;
- arm-*-pe*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- arm-*-riscix*)
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
- ;;
- avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
- ;;
- bfin-*-*)
- unsupported_languages="$unsupported_languages java"
- noconfigdirs="$noconfigdirs target-boehm-gc"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
;;
- c4x-*-* | tic4x-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ arc-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- c54x*-*-* | tic54x-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
+ arm-*-pe*)
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- cr16-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ arm-*-riscix*)
+ noconfigdirs="$noconfigdirs ld target-libgloss"
;;
- cris-*-* | crisv32-*-*)
- unsupported_languages="$unsupported_languages java"
- case "${target}" in
- *-*-aout)
- unsupported_languages="$unsupported_languages fortran"
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-elf) # See PR46792 regarding target-libffi.
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
- *)
- unsupported_languages="$unsupported_languages fortran"
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
- esac
- libgloss_dir=cris
+ c4x-*-* | tic4x-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ tic54x-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss gdb"
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
d30v-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ noconfigdirs="$noconfigdirs gdb"
;;
fr30-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
- ;;
- frv-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb"
;;
moxie-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs gprof"
;;
h8300*-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
hppa*64*-*-linux*)
- # In this case, it's because the hppa64-linux target is for
- # the kernel only at this point and has no libc, and thus no
- # headers, crt*.o, etc., all of which are needed by these.
- noconfigdirs="$noconfigdirs target-zlib"
;;
hppa*-*-linux*)
;;
hppa*-*-lites* | \
hppa*-*-openbsd* | \
hppa*64*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
;;
hppa*-hp-hpux11*)
- noconfigdirs="$noconfigdirs ld shellutils"
+ noconfigdirs="$noconfigdirs ld"
;;
hppa*-*-pro*)
- libgloss_dir=pa
;;
hppa*-*-*)
- # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
- # build on HP-UX 10.20.
- noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+ noconfigdirs="$noconfigdirs ld"
;;
i960-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ noconfigdirs="$noconfigdirs gdb"
;;
ia64*-*-elf*)
# No gdb support yet.
- noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
+ noconfigdirs="$noconfigdirs readline libgui itcl gdb"
;;
ia64*-**-hpux*)
# No ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
+ noconfigdirs="$noconfigdirs libgui itcl ld"
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
- ;;
- i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=i386
- ;;
- i[[3456789]]86-*-linux*)
- # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
- # not build java stuff by default.
- case "${target}" in
- *-*-*libc1*)
- noconfigdirs="$noconfigdirs ${libgcj}";;
- esac
-
- # This section makes it possible to build newlib natively on linux.
- # If we are using a cross compiler then don't configure newlib.
- if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs target-newlib"
- fi
- noconfigdirs="$noconfigdirs target-libgloss"
- # If we are not using a cross compiler, do configure newlib.
- # Note however, that newlib will only be configured in this situation
- # if the --with-newlib option has been given, because otherwise
- # 'target-newlib' will appear in skipdirs.
+ noconfigdirs="$noconfigdirs readline libgui itcl gdb ld"
;;
i[[3456789]]86-w64-mingw*)
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
;;
i[[3456789]]86-*-mingw*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
- ;;
- x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss"
# always build newlib if winsup directory is present.
if test -d "$srcdir/winsup/cygwin"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
;;
- i[[3456789]]86-*-interix* )
- ;;
i[[3456789]]86-*-pe)
noconfigdirs="$noconfigdirs target-libgloss"
;;
i[[3456789]]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ld target-libgloss"
;;
i[[3456789]]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
- i[[3456789]]86-*-solaris2*)
+ i[[3456789]]86-*-solaris2* | x86_64-*-solaris2.1[[0-9]]*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
i[[3456789]]86-*-sysv4*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[[3456789]]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb"
;;
i[[3456789]]86-*-rdos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
- ;;
- m32r-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty"
- libgloss_dir=m68hc11
- ;;
- m68k-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- m68k-*-coff*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- m68*-*-* | fido-*-*)
- libgloss_dir=m68k
+ noconfigdirs="$noconfigdirs gdb"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
- unsupported_languages="$unsupported_languages fortran java"
- ;;
- mn10200-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- mn10300-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb"
;;
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
- picochip-*-*)
- noconfigdirs="$noconfigdirs target-libiberty"
- ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
- libgloss_dir=rs6000
+ noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
;;
powerpc-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
- ;;
- powerpc-*-eabi)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=rs6000
- ;;
- powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
- libgloss_dir=rs6000
+ noconfigdirs="$noconfigdirs gdb"
;;
rs6000-*-lynxos*)
- noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
rs6000-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
m68k-apollo-*)
- noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
;;
microblaze*)
- noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
mips*-sde-elf*)
- skipdirs="$skipdirs target-libiberty"
- noconfigdirs="$noconfigdirs ${libgcj}"
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
fi
- libgloss_dir=mips
;;
mips*-*-irix5*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-irix6*)
- # Linking libjava exceeds command-line length limits on at least
- # IRIX 6.2, but not on IRIX 6.5.
- # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
- # <oldham@codesourcery.com>
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
mips*-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
- libgloss_dir=mips
- ;;
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
sh-*-* | sh64-*-*)
- case "${host}" in
- i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
- *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
- esac
case "${target}" in
sh*-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}" ;;
+ ;;
*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;;
+ noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
;;
- sparclet-*-aout* | sparc86x-*-*)
- libgloss_dir=sparc
- ;;
- sparc-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- sparc64-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=sparc
- ;;
- sparclite-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=sparc
- ;;
sparc-*-sunos4*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
- else
+ if test x${is_cross_compiler} = xno ; then
use_gnu_ld=no
fi
;;
- sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
- ;;
tic6x-*-*)
- noconfigdirs="$noconfigdirs gdb sim ${libgcj}"
- ;;
- v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs sim"
;;
- v850*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ tilepro-*-* | tilegx-*-*)
+ noconfigdirs="$noconfigdirs sim"
;;
- vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
+ v810-*-*)
+ noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
;;
vax-*-*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- xtensa*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- ip2k-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
- ;;
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- *-*-lynxos*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- *-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
esac
# If we aren't building newlib, then don't build libgloss, since libgloss
*-mingw*)
host_makefile_frag="config/mh-mingw"
;;
- *-interix*)
- host_makefile_frag="config/mh-interix"
- ;;
hppa*-hp-hpux10*)
host_makefile_frag="config/mh-pa-hpux10"
;;
ACX_PROG_GNAT
ACX_PROG_CMP_IGNORE_INITIAL
+AC_ARG_ENABLE([bootstrap],
+[AS_HELP_STRING([--enable-bootstrap],
+ [enable bootstrapping @<:@yes if native build@:>@])],,
+enable_bootstrap=default)
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+if test -r $srcdir/gcc/configure; then
+ have_compiler=yes
+else
+ have_compiler=no
+fi
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+ *:*:*:no) ;;
+
+ # Default behavior. Enable bootstrap if we have a compiler
+ # and we are in a native configuration.
+ yes:$build:$build:default)
+ enable_bootstrap=yes ;;
+
+ *:*:*:default)
+ enable_bootstrap=no ;;
+
+ # We have a compiler and we are in a native configuration, bootstrap is ok
+ yes:$build:$build:yes)
+ ;;
+
+ # Other configurations, but we have a compiler. Assume the user knows
+ # what he's doing.
+ yes:*:*:yes)
+ AC_MSG_WARN([trying to bootstrap a cross compiler])
+ ;;
+
+ # No compiler: if they passed --enable-bootstrap explicitly, fail
+ no:*:*:yes)
+ AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
+
+ # Fail if wrong command line
+ *)
+ AC_MSG_ERROR([invalid option for --enable-bootstrap])
+ ;;
+esac
+
# See if we are building gcc with C++.
AC_ARG_ENABLE(build-with-cxx,
[AS_HELP_STRING([--enable-build-with-cxx],
ENABLE_BUILD_WITH_CXX=$enableval,
ENABLE_BUILD_WITH_CXX=no)
+# Build stage1 with C and build stages 2 and 3 with C++.
+AC_ARG_ENABLE(build-poststage1-with-cxx,
+[AS_HELP_STRING([--enable-build-poststage1-with-cxx],
+ [build stages 2 and 3 with C++, not C])],
+ENABLE_BUILD_POSTSTAGE1_WITH_CXX=$enableval,
+ENABLE_BUILD_POSTSTAGE1_WITH_CXX=yes)
+
# Used for setting $lt_cv_objdir
_LT_CHECK_OBJDIR
build_lto_plugin=yes
],[if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9* | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
;;
esac
+ # If bootstrapping, then using --enable-build-with-cxx or
+ # --enable-build-poststage1-with-cxx requires enabling C++.
+ case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
+ *,c++,*:*:*) ;;
+ *:*,yes,*:yes)
+ if test -f ${srcdir}/gcc/cp/config-lang.in; then
+ enable_languages="${enable_languages},c++"
+ else
+ AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources])
+ fi
+ ;;
+ esac
+
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
exit 1
fi
- if test "$language" = "c++" \
- && test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
- boot_language=yes
+ if test "$language" = "c++"; then
+ if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
+ || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
+ boot_language=yes
+ fi
fi
case ,${enable_languages}, in
;;
esac
+# Disable libitm if we're not building C++
+case ,${enable_languages}, in
+ *,c++,*) ;;
+ *)
+ noconfigdirs="$noconfigdirs target-libitm"
+ ;;
+esac
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
fi
done
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries. In that case, we don't want to build target-libiberty.
-# Don't let libgcc imply libiberty either.
-if test -n "${target_configdirs}" ; then
- libgcc=
- others=
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if test "$i" = "libgcc"; then
- libgcc=target-libgcc
- elif test "$i" != "libiberty" ; then
- if test -r $srcdir/$i/configure ; then
- others=yes;
- break;
- fi
- fi
- done
- if test -z "${others}" ; then
- target_configdirs=$libgcc
- fi
-fi
-
# Quietly strip out all directories which aren't configurable in this tree.
# This relies on all configurable subdirectories being autoconfiscated, which
# is now the case.
fi
AC_SUBST(CXXFLAGS_FOR_TARGET)
+AC_SUBST(LDFLAGS_FOR_TARGET)
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
# the *-*-osname triplets last.
md_exec_prefix=
case "${target}" in
- alpha*-*-*vms*)
- md_exec_prefix=/gnu/lib/gcc-lib
- ;;
i[[34567]]86-pc-msdosdjgpp*)
md_exec_prefix=/dev/env/DJDIR/bin
;;
- i[[34567]]86-*-sco3.2v5*)
- if test $with_gnu_as = yes; then
- md_exec_prefix=/usr/gnu/bin
- else
- md_exec_prefix=/usr/ccs/bin/elf
- fi
- ;;
-
- mn10300-*-* | \
- powerpc-*-chorusos* | \
- powerpc*-*-eabi* | \
- powerpc*-*-sysv* | \
- powerpc*-*-kaos* | \
- s390x-ibm-tpf*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- sparc64-*-elf*)
- ;;
- v850*-*-*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- xtensa*-*-elf*)
- ;;
-
- *-*-beos* | \
- *-*-elf* | \
*-*-hpux* | \
- *-*-netware* | \
*-*-nto-qnx* | \
- *-*-rtems* | \
- *-*-solaris2* | \
- *-*-sysv[[45]]* | \
- *-*-vxworks* | \
- *-wrs-windiss)
+ *-*-solaris2*)
md_exec_prefix=/usr/ccs/bin
;;
esac
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
;;
- *-*-darwin[[3-9]]*)
- # ranlib before Darwin10 requires the -c flag to look at common symbols.
- extra_ranlibflags_for_target=" -c"
- ;;
esac
alphaieee_frag=/dev/null
esac
fi
-# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
-# them automatically.
-case "${host}" in
- hppa*64*-*-hpux11*)
- extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
- ;;
-esac
-
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='${exec_prefix}'/${target_noncanonical}
esac
rm -f conftest*
-# The Solaris /usr/ucb/cc compiler does not appear to work.
-case "${host}" in
- sparc-sun-solaris2*)
- CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then
- could_use=
- test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
- if test -d /opt/cygnus/bin ; then
- if test "$could_use" = "" ; then
- could_use="/opt/cygnus/bin"
- else
- could_use="$could_use or /opt/cygnus/bin"
- fi
- fi
- if test "$could_use" = "" ; then
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc. You should change your PATH or CC "
- echo "variable and rerun configure."
- else
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc, when you should use the C compiler from"
- echo "$could_use. You should change your"
- echo "PATH or CC variable and rerun configure."
- fi
- fi
- ;;
-esac
-
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
# 99 commands in a script, for HP-UX sed.
# Do not nest @if/@endif pairs, because configure will not warn you at all.
-AC_ARG_ENABLE([bootstrap],
-[AS_HELP_STRING([--enable-bootstrap],
- [enable bootstrapping @<:@yes if native build@:>@])],,
-enable_bootstrap=default)
-
-# Issue errors and warnings for invalid/strange bootstrap combinations.
-case "$configdirs" in
- *gcc*) have_compiler=yes ;;
- *) have_compiler=no ;;
-esac
-
-case "$have_compiler:$host:$target:$enable_bootstrap" in
- *:*:*:no) ;;
-
- # Default behavior. Enable bootstrap if we have a compiler
- # and we are in a native configuration.
- yes:$build:$build:default)
- enable_bootstrap=yes ;;
-
- *:*:*:default)
- enable_bootstrap=no ;;
-
- # We have a compiler and we are in a native configuration, bootstrap is ok
- yes:$build:$build:yes)
- ;;
-
- # Other configurations, but we have a compiler. Assume the user knows
- # what he's doing.
- yes:*:*:yes)
- AC_MSG_WARN([trying to bootstrap a cross compiler])
- ;;
-
- # No compiler: if they passed --enable-bootstrap explicitly, fail
- no:*:*:yes)
- AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
-
- # Fail if wrong command line
- *)
- AC_MSG_ERROR([invalid option for --enable-bootstrap])
- ;;
-esac
-
-case ",$enable_languages,:$ENABLE_BUILD_WITH_CXX:$enable_bootstrap" in
- *,c++,*:yes:yes) ;;
- *:yes:yes)
- AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx requires c++ in --enable-languages])
- ;;
-esac
-
case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
yes:yes:*\ gold\ *:*,c++,*) ;;
yes:yes:*\ gold\ *:*)
AC_SUBST(RANLIB_FOR_BUILD)
AC_SUBST(WINDMC_FOR_BUILD)
AC_SUBST(WINDRES_FOR_BUILD)
-AC_SUBST(config_shell)
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
case " $build_configdirs " in
*" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
- *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
esac
AC_CHECK_PROGS([BISON], [bison], [$MISSING bison])
NCN_STRICT_CHECK_TOOLS(WINDMC, windmc)
NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
+NCN_STRICT_CHECK_TOOLS(READELF, readelf)
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
+ACX_CHECK_INSTALLED_TARGET_TOOL(READELF_FOR_TARGET, readelf)
ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
ACX_CHECK_INSTALLED_TARGET_TOOL(WINDMC_FOR_TARGET, windmc)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
+GCC_TARGET_TOOL(readelf, READELF_FOR_TARGET, READELF, [binutils/readelf])
GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc])
esac
AC_SUBST(stage2_werror_flag)
+# If using ENABLE_BUILD_POSTSTAGE1_WITH_CXX, pass
+# --enable-build-with-cxx after stage1.
+if test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
+ POSTSTAGE1_CONFIGURE_FLAGS=--enable-build-with-cxx
+else
+ POSTSTAGE1_CONFIGURE_FLAGS=
+fi
+AC_SUBST(POSTSTAGE1_CONFIGURE_FLAGS)
+
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"