x86-64: Pass aggregates with only float/double in GPRs for MS_ABI
[gcc.git] / configure.ac
index af9d06f4397155c2250a448885051a477be6387b..df2af18f9bdc6a6de3458864f8e5d2d3db2ee875 100644 (file)
@@ -1,6 +1,6 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
 #   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
-#   2014, 2015, 2016 Free Software Foundation, Inc.
+#   2014, 2015, 2016, 2019 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -638,9 +638,16 @@ case "${target}" in
     # No hosted I/O support.
     noconfigdirs="$noconfigdirs target-libssp"
     ;;
+  bpf-*-*)
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
   powerpc-*-aix* | rs6000-*-aix*)
     noconfigdirs="$noconfigdirs target-libssp"
     ;;
+  pru-*-*)
+    # No hosted I/O support.
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
   rl78-*-*)
     # libssp uses a misaligned load to trigger a fault, but the RL78
     # doesn't fault for those - instead, it gives a build-time error
@@ -668,12 +675,43 @@ if test "${ENABLE_LIBSTDCXX}" = "default" ; then
     avr-*-*)
       noconfigdirs="$noconfigdirs target-libstdc++-v3"
       ;;
+    bpf-*-*)
+      noconfigdirs="$noconfigdirs target-libstdc++-v3"
+      ;;
     ft32-*-*)
       noconfigdirs="$noconfigdirs target-libstdc++-v3"
       ;;
   esac
 fi
 
+# Disable C++ on systems where it is known to not work.
+# For testing, you can override this with --enable-languages=c++.
+case ,${enable_languages}, in
+  *,c++,*)
+    ;;
+  *)
+      case "${target}" in
+        bpf-*-*)
+          unsupported_languages="$unsupported_languages c++"
+          ;;
+      esac
+      ;;
+esac
+
+# Disable Objc on systems where it is known to not work.
+# For testing, you can override this with --enable-languages=objc.
+case ,${enable_languages}, in
+  *,objc,*)
+    ;;
+  *)
+      case "${target}" in
+        bpf-*-*)
+          unsupported_languages="$unsupported_languages objc"
+          ;;
+      esac
+      ;;
+esac
+
 # Disable D on systems where it is known to not work.
 # For testing, you can override this with --enable-languages=d.
 case ,${enable_languages}, in
@@ -682,6 +720,9 @@ case ,${enable_languages}, in
   *)
     case "${target}" in
       *-*-darwin*)
+       unsupported_languages="$unsupported_languages d"
+        ;;
+      bpf-*-*)
        unsupported_languages="$unsupported_languages d"
        ;;
     esac
@@ -711,6 +752,9 @@ case "${target}" in
     # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
     unsupported_languages="$unsupported_languages fortran"
     ;;
+  bpf-*-*)
+    unsupported_languages="$unsupported_languages fortran"
+    ;;
 esac
 
 # Disable libffi for some systems.
@@ -757,6 +801,9 @@ case "${target}" in
   arm*-*-symbianelf*)
     noconfigdirs="$noconfigdirs target-libffi"
     ;;
+  bpf-*-*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
   cris-*-* | crisv32-*-*)
     case "${target}" in
       *-*-linux*)
@@ -803,7 +850,7 @@ esac
 # Disable the go frontend on systems where it is known to not work. Please keep
 # this in sync with contrib/config-list.mk.
 case "${target}" in
-*-*-darwin* | *-*-cygwin* | *-*-mingw*)
+*-*-darwin* | *-*-cygwin* | *-*-mingw* | bpf-* )
     unsupported_languages="$unsupported_languages go"
     ;;
 esac
@@ -819,6 +866,9 @@ if test x$enable_libgo = x; then
     *-*-cygwin* | *-*-mingw*)
        noconfigdirs="$noconfigdirs target-libgo"
        ;;
+    bpf-*-*)
+        noconfigdirs="$noconfigdirs target-libgo"
+        ;;
     esac
 fi
 
@@ -856,6 +906,9 @@ case "${target}" in
   powerpc*-*-*)
     libgloss_dir=rs6000
     ;;
+  pru-*-*)
+    libgloss_dir=pru
+    ;;
   sparc*-*-*)
     libgloss_dir=sparc
     ;;
@@ -887,6 +940,9 @@ case "${target}" in
   sparc-*-sunos4*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
+  bpf-*-*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
   *-*-aix*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
@@ -1000,6 +1056,9 @@ case "${target}" in
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
+  bpf-*-*)
+    noconfigdirs="$noconfigdirs target-libobjc target-libbacktrace"
+    ;;
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
     noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
     ;;
@@ -1542,12 +1601,12 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
     AC_MSG_CHECKING([for the correct version of mpfr.h])
     AC_TRY_COMPILE([#include <gmp.h>
     #include <mpfr.h>],[
-    #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
+    #if MPFR_VERSION < MPFR_VERSION_NUM(3,1,0)
     choke me
     #endif
     ], [AC_TRY_COMPILE([#include <gmp.h>
     #include <mpfr.h>],[
-    #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,2)
+    #if MPFR_VERSION < MPFR_VERSION_NUM(3,1,6)
     choke me
     #endif
     ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
@@ -1582,9 +1641,9 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
     int t;
     mpfr_init (n);
     mpfr_init (x);
-    mpfr_atan2 (n, n, x, GMP_RNDN);
-    mpfr_erfc (n, x, GMP_RNDN);
-    mpfr_subnormalize (x, t, GMP_RNDN);
+    mpfr_atan2 (n, n, x, MPFR_RNDN);
+    mpfr_erfc (n, x, MPFR_RNDN);
+    mpfr_subnormalize (x, t, MPFR_RNDN);
     mpfr_clear(n);
     mpfr_clear(x);
     mpc_init2 (c, 53);
@@ -1602,11 +1661,11 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
 # The library versions listed in the error message below should match
 # the HARD-minimums enforced above.
   if test x$have_gmp != xyes; then
-    AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
+    AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 3.1.0+ and MPC 0.8.0+.
 Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
 their locations.  Source code for these libraries can be found at
 their respective hosting sites as well as at
-ftp://gcc.gnu.org/pub/gcc/infrastructure/.  See also
+https://gcc.gnu.org/pub/gcc/infrastructure/.  See also
 http://gcc.gnu.org/install/prerequisites.html for additional info.  If
 you obtained GMP, MPFR and/or MPC from a vendor distribution package,
 make sure that you have installed both the libraries and the header
@@ -1633,6 +1692,19 @@ AC_ARG_WITH(stage1-libs,
 [stage1_libs=])
 AC_SUBST(stage1_libs)
 
+# Whether or not to use -static-libstdc++ and -static-libgcc.  The
+# default is yes if gcc is being built; no otherwise.  The reason for
+# this default is that gdb is sometimes linked against GNU Source
+# Highlight, which is a shared library that uses C++ exceptions.  In
+# this case, -static-libstdc++ will cause crashes.
+AC_ARG_WITH(static-standard-libraries,
+[AS_HELP_STRING([--with-static-standard-libraries],
+                [use -static-libstdc++ and -static-libgcc (default=auto)])],
+[], [with_static_standard_libraries=auto])
+if test "$with_static_standard_libraries" = auto; then
+  with_static_standard_libraries=$have_compiler
+fi
+
 # Linker flags to use for stage1 or when not bootstrapping.
 AC_ARG_WITH(stage1-ldflags,
 [AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
@@ -1645,7 +1717,8 @@ AC_ARG_WITH(stage1-ldflags,
  # In stage 1, default to linking libstdc++ and libgcc statically with GCC
  # if supported.  But if the user explicitly specified the libraries to use,
  # trust that they are doing what they want.
- if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
+ if test "$with_static_standard_libraries" = yes -a "$stage1_libs" = "" \
+     -a "$have_static_libs" = yes; then
    stage1_ldflags="-static-libstdc++ -static-libgcc"
  fi])
 AC_SUBST(stage1_ldflags)
@@ -2743,6 +2816,14 @@ esac
 CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
 INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 
+# gdb depends on gnulib, but as nothing else does, only include it if
+# gdb is built.
+if echo " ${configdirs} " | grep " gdb " > /dev/null 2>&1 ; then
+  # The Makefile provides the ordering, so it's enough here to add
+  # gnulib to the list.
+  configdirs="${configdirs} gnulib"
+fi
+
 # Strip out unwanted targets.
 
 # While at that, we remove Makefiles if we were started for recursive
@@ -3547,8 +3628,8 @@ AC_SUBST(stage2_werror_flag)
 compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
 case "$target" in
   hppa*64*-*-hpux*) ;;
-  hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/* | gcc/function-tests.o" ;;
-  powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
+  hppa*-*-hpux*) compare_exclusions="$compare_exclusions | */libgcc/lib2funcs* | gcc/function-tests.o" ;;
+  powerpc*-ibm-aix*) compare_exclusions="$compare_exclusions | *libgomp*\$(objext)" ;;
 esac
 AC_SUBST(compare_exclusions)