## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992-99, 2000 Free Software Foundation, Inc.
+# Copyright (C) 1992-99, 2000, 2001 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
esac
+# Save it here so that, even in case of --enable-libgcj, if the Java
+# front-end isn't enabled, we still get libgcj disabled.
+libgcj_saved=$libgcj
+case $enable_libgcj in
+yes)
+ # If we reset it here, it won't get added to noconfigdirs in the
+ # target-specific build rules, so it will be forcibly enabled
+ # (unless the Java language itself isn't enabled).
+ libgcj=
+ ;;
+no)
+ # Make sure we get it printed in the list of not supported target libs.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+esac
+
case "${target}" in
*-*-netware)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi"
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
- h8300*-*-* | \
+ h8300*-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
h8500-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
*) ;;
esac
- noconfigdirs="$noconfigdirs ld shellutils"
+ # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+ # build on HP-UX 10.20.
+ noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
;;
ia64*-*-elf*)
# No gdb support yet.
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss target-libffi"
;;
i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-librx target-libg++ target-libstdc++ target-libio target-libf2c target-libchill target-zlib target-libobjc"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- # The configure and build of ld are currently disabled because
- # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
- # The symptom is that GDBtk 4.18 fails at startup with a segfault
- # if linked by GNU ld, but not if linked by the native ld.
- noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss target-libffi ld"
- use_gnu_ld=no
+ use_gnu_ld=yes
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof cvssrc target-libffi"
;;
rs6000-*-aix*)
- # The configure and build of ld are currently disabled because
- # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
- # The symptom is that GDBtk 4.18 fails at startup with a segfault
- # if linked by GNU ld, but not if linked by the native ld.
- noconfigdirs="$noconfigdirs gprof target-libffi ld"
- use_gnu_ld=no
+ noconfigdirs="$noconfigdirs gprof target-libffi"
+ use_gnu_ld=yes
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof target-libffi"
mips*-*-irix6*)
# The GNU assembler does not support IRIX 6.
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
- noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
+ # Linking libjava exceeds command-line length limits on at least
+ # IRIX 6.2, but not on IRIX 6.5.
+ # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+ # <oldham@codesourcery.com>
+ noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss ${libgcj}"
;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
sparclite-*-*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
use_gnu_ld=no
fi
;;
+ sparc-*-solaris*)
+ case "${host}" in
+ sparc-*-solaris2.8)
+ # According to Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>, libjava
+ # won't build correctly on Solaris 8 if there's a
+ # previously-installed version of GCC in the configured prefix.
+ # This problem does not show up on earlier versions of Solaris.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
+ ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss target-libffi"
;;
*-*-mpw*)
# Macs want a resource compiler.
configdirs="$configdirs grez"
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
esac
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
- enable_languages="`echo ${LANGUAGES} | tr ' ' ','`"
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
else
enable_languages=all
fi
else
- if test x"${enable_languages}" = x; then
- echo configure.in: --enable-languages needs at least one argument 1>&2
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
exit 1
fi
fi
+enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
subdirs=
for lang in ${srcdir}/gcc/*/config-lang.in ..
do
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
+ if [ "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ] ; then
could_use=
[ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
if [ -d /opt/cygnus/bin ] ; then
projects / binutils-gdb.git / blobdiff