hppa*64*-*-*)
noconfigdirs="$noconfigdirs byacc"
;;
- i[[3456]]86-*-vsta)
+ i[[3456789]]86-*-vsta)
noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
;;
- i[[3456]]86-*-go32* | i[[3456]]86-*-msdosdjgpp*)
+ i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
;;
- i[[3456]]86-*-mingw32*)
+ i[[3456789]]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
;;
- i[[3456]]86-*-beos*)
+ i[[3456789]]86-*-beos*)
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
*-*-cygwin*)
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
;;
- i[[3456]]86-*-coff | i[[3456]]86-*-elf)
+ i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- i[[34567]]86-*-freebsd*)
+ i[[3456789]]86-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- i[[3456]]86-*-linux*)
+ i[[3456789]]86-*-linux*)
# The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
# not build java stuff by default.
case "${target}" in
# if the --with-newlib option has been given, because otherwise
# 'target-newlib' will appear in skipdirs.
;;
- i[[3456]]86-*-mingw32*)
+ i[[3456789]]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
- i[[3456]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+ i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
*) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
;;
esac
;;
esac
;;
- i[[3456]]86-*-pe)
+ i[[3456789]]86-*-pe)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
- i[[3456]]86-*-sco3.2v5*)
+ i[[3456789]]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
- i[[3456]]86-*-sco*)
+ i[[3456789]]86-*-sco*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- i[[3456]]86-*-solaris2*)
+ i[[3456789]]86-*-solaris2*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
- i[[3456]]86-*-sysv4*)
+ i[[3456789]]86-*-sysv4*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- i[[3456]]86-*-beos*)
+ i[[3456789]]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
;;
sh-*-*)
case "${host}" in
- i[[3456]]86-*-vsta) ;; # don't add gprof back in
- i[[3456]]86-*-go32*) ;; # don't add gprof back in
- i[[3456]]86-*-msdosdjgpp*) ;; # don't add gprof back in
+ i[[3456789]]86-*-vsta) ;; # don't add gprof back in
+ i[[3456789]]86-*-go32*) ;; # don't add gprof back in
+ i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
i370-ibm-opened*)
tentative_cc="c89"
;;
- i[[3456]]86-*-sysv5*)
+ i[[3456789]]86-*-sysv5*)
host_makefile_frag="config/mh-sysv5"
;;
- i[[3456]]86-*-dgux*)
+ i[[3456789]]86-*-dgux*)
tentative_cc="gcc -Wall -ansi -D__using_DGUX"
host_makefile_frag="config/mh-dgux386"
;;
- i[[3456]]86-ncr-sysv4.3*)
+ i[[3456789]]86-ncr-sysv4.3*)
# The MetaWare compiler will generate a copyright message unless you
# turn it off by adding the -Hnocopyr flag.
tentative_cc="cc -Hnocopyr"
;;
- i[[3456]]86-ncr-sysv4*)
+ i[[3456789]]86-ncr-sysv4*)
# for an NCR 3000 (i486/SVR4) system.
# The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
# This compiler not only emits obnoxious copyright messages every time
tentative_cc="/usr/ccs/ATT/cc"
host_makefile_frag="config/mh-ncr3000"
;;
- i[[3456]]86-*-sco3.2v5*)
+ i[[3456789]]86-*-sco3.2v5*)
;;
- i[[3456]]86-*-sco*)
+ i[[3456789]]86-*-sco*)
# The native C compiler botches some simple uses of const. Unfortunately,
# it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
tentative_cc="cc -Dconst="
host_makefile_frag="config/mh-sco"
;;
- i[[3456]]86-*-udk*)
+ i[[3456789]]86-*-udk*)
host_makefile_frag="config/mh-sysv5"
;;
- i[[3456]]86-*-solaris2*)
+ i[[3456789]]86-*-solaris2*)
host_makefile_frag="config/mh-sysv4"
;;
- i[[3456]]86-*-msdosdjgpp*)
+ i[[3456789]]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-cygwin*)
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- i[[3456]]86-*-netware*)
+ i[[3456789]]86-*-netware*)
target_makefile_frag="config/mt-netware"
;;
powerpc-*-netware*)
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
- mips*-*-irix6*o32)
- with_stabs=yes;
- extra_host_args="${extra_host_args} --with-stabs"
- ;;
mips*-*-irix6*)
;;
mips*-*-* | alpha*-*-osf*)
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
-tooldir='$(exec_prefix)'/${target_alias}
+tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
# Generate a default definition for YACC. This is used if the makefile can't
configure_build_modules=configure-build-${module}
done
-check_host_modules=
-install_host_modules=
-for module in ${configdirs} ; do
- check_host_modules="${check_host_modules} check-${module}"
- install_host_modules="${install_host_modules} install-${module}"
-done
-install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
-
-check_target_modules=
-for module in ${target_configdirs} ; do
- check_target_modules="${check_target_modules} check-target-${module}"
-done
-
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk. Ugh!
echo '# maybedep.tmp' > maybedep.tmp
# Make-targets which may need maybe dependencies.
-mts="configure all install"
+mts="configure all install check clean distclean dvi info install-info"
+mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
# Loop over modules and make-targets.
for module in ${build_modules} ; do
# Create the serialization dependencies. This uses a temporary file.
AC_ARG_ENABLE([serial-configure],
-[ --disable-serial-[{host,target,build}-]configure
- Don't force sequential configuration of
+[ --enable-serial-[{host,target,build}-]configure
+ Force sequential configuration of
sub-packages for the host, target or build
- machine, or of any sub-packages at all])
+ machine, or all sub-packages])
+
+case ${enable_serial_configure} in
+ yes)
+ enable_serial_build_configure=yes
+ enable_serial_host_configure=yes
+ enable_serial_target_configure=yes
+ ;;
+esac
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
echo '# serdep.tmp' > serdep.tmp
olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_build_configure}" = xno ||
+test "x${enable_serial_build_configure}" = xyes &&
for item in ${build_configdirs} ; do
case ${olditem} in
"") ;;
olditem=${item}
done
olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_host_configure}" = xno ||
+test "x${enable_serial_host_configure}" = xyes &&
for item in ${configdirs} ; do
case ${olditem} in
"") ;;
olditem=${item}
done
olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_target_configure}" = xno ||
+test "x${enable_serial_target_configure}" = xyes &&
for item in ${target_configdirs} ; do
case ${olditem} in
"") ;;
fi
case "${target}-${is_cross_compiler}" in
- i[[3456]]86-*-linux*-no)
+ i[[3456789]]86-*-linux*-no)
# Here host == target, so we don't need to build gcc,
# so we don't want to discard standard headers.
FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
if test "x${CXX_FOR_TARGET+set}" = xset; then
# Host module lists & subconfigure args.
AC_SUBST(host_configargs)
AC_SUBST(configdirs)
-AC_SUBST(check_host_modules)
-AC_SUBST(install_host_modules_nogcc)
# Target module lists & subconfigure args.
AC_SUBST(target_configargs)
AC_SUBST(target_configdirs)
-AC_SUBST(check_target_modules)
# Build tools.
AC_SUBST(BISON)