* sparc-nat.c (inf_ptrace_xfer_partial): New variable.

[binutils-gdb.git] / configure.in

diff --git a/configure.in b/configure.in
index cd4ee039bcb3384da0ed58d1a0abd19a3b64fe5a..d244a5588271197c71fb9b574cc3900f75687522 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -150,7 +150,7 @@ host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib l
 # know that we are building the simulator.
 # binutils, gas and ld appear in that order because it makes sense to run
 # "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
 
 # libgcj represents the runtime libraries only used by gcj.
 libgcj="target-libffi \
@@ -433,7 +433,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
     ;;
   alpha*-*-*vms*)
-    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss build-fixincludes ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
     ;;
   alpha*-*-linux*)
     # newlib is not 64 bit ready
@@ -468,7 +468,6 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   arm-semi-aof )
-    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   arm-*-coff | strongarm-*-coff | xscale-*-coff)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -495,7 +494,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
     ;;
   avr-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 build-fixincludes ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
   c4x-*-* | tic4x-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
@@ -528,7 +527,6 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
   hppa1.1-*-osf* | hppa1.1-*-bsd* )
-    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   hppa*64*-*-linux* | parisc*64*-*-linux*)
     # In this case, it's because the hppa64-linux target is for
@@ -536,13 +534,13 @@ case "${target}" in
     # headers, crt*.o, etc., all of which are needed by these.
     noconfigdirs="$noconfigdirs target-zlib"
     ;;
+  parisc*-*-linux* | hppa*-*-linux*)
+    ;;
   hppa*-*-*elf* | \
-  parisc*-*-linux* | hppa*-*-linux* | \
   hppa*-*-lites* | \
   hppa*-*-openbsd* | \
   hppa*64*-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
-    # Do configure ld/binutils/gas for this case.
     ;;
   hppa*-*-*)
     # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
@@ -561,7 +559,6 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
     ;;
   i370-*-opened*)
-    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -587,7 +584,7 @@ case "${target}" in
     ;;
   i[[3456789]]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
-    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj} build-fixincludes"
+    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
 
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
@@ -598,7 +595,7 @@ case "${target}" in
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss build-fixincludes ${libgcj}"
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
     # always build newlib if winsup directory is present.
     if test -d "$srcdir/winsup"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -615,10 +612,9 @@ case "${target}" in
     ;;    
   i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
   i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
-    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   i[[3456789]]86-*-pe)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} build-fixincludes"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
   i[[3456789]]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
@@ -655,7 +651,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libstdc++-v3"
     ;;
   mmix-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
     ;;
   mn10200-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -681,10 +677,9 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
   powerpc-*-eabi)
-    noconfigdirs="$noconfigdirs ${libgcj} build-fixincludes"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
-    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   rs6000-*-lynxos*)
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
@@ -1647,10 +1642,25 @@ case "${host}" in
   ;;
 esac
 
+# If no --enable-shared nor --disable-shared is specified, we set up
+# LD_LIBRARY_PATH when we build for gcc.
+case $enable_shared in
+"")
+  if test -d ${srcdir}/gcc; then
+    set_lib_path=yes
+  else 
+    set_lib_path=no
+  fi
+  ;;
+*)
+  set_lib_path=$enable_shared
+  ;;
+esac
+
 # If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
 # binutils tools will find libbfd.so.
-case "${enable_shared}" in
-  no | "") SET_LIB_PATH= ;;
+case "${set_lib_path}" in
+  no) SET_LIB_PATH= ;;
   *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
 esac
 
@@ -1905,7 +1915,7 @@ baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
 # For the build-side libraries, we just need to pretend we're native,
 # and not use the same cache file.  Multilibs are neither needed nor
 # desired.
-build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} --target=${target_alias} ${baseargs}"
 
 # For host modules, accept cache file option, or specification as blank.
 case "${cache_file}" in
@@ -2328,8 +2338,8 @@ AC_SUBST(stage2_werror_flag)
 # used.
 SET_GCC_LIB_PATH=
 if test -d ${srcdir}/gcc && test x${is_cross_compiler} = xno; then
-  case "${enable_shared}" in
-    no | "") ;;
+  case "${set_lib_path}" in
+    no) ;;
     *)
       eval "d=\$$RPATH_ENVVAR"
       if test x"$d" != x; then