(m32r_check_fixup): Fixed X_op check.

[binutils-gdb.git] / configure.in

diff --git a/configure.in b/configure.in
index c2ced9168a7fa025a35e9b91f59ac99c4327bbde..f5877a708a4d86e03ba4e59565bc04de92b92517 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -13,7 +13,7 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
 ##############################################################################
 ### WARNING: this file contains embedded tabs.  Do not run untabify on this file.
@@ -147,6 +147,7 @@ target_libraries="target-libiberty \
                target-newlib \
                target-libstdc++-v3 \
                target-libmudflap \
+               target-libssp \
                target-libgfortran \
                ${libgcj} \
                target-libobjc \
@@ -257,6 +258,10 @@ case "${host}" in
     configdirs="$configdirs libtermcap" ;;
 esac
 
+# A target can indicate whether a language isn't supported for some reason.
+# Only spaces may be used in this macro; not newlines or tabs.
+unsupported_languages=
+
 # Remove more programs from consideration, based on the host or 
 # target this usually means that a port of the program doesn't
 # exist yet.
@@ -302,6 +307,14 @@ if test "${ENABLE_LIBADA}" != "yes" ; then
   noconfigdirs="$noconfigdirs gnattools"
 fi
 
+AC_ARG_ENABLE(libssp,
+[  --enable-libssp        Builds libssp directory],
+ENABLE_LIBSSP=$enableval,
+ENABLE_LIBSSP=yes)
+if test "${ENABLE_LIBSSP}" != "yes" ; then
+  noconfigdirs="$noconfigdirs target-libssp"
+fi
+
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
 libgcj_saved=$libgcj
@@ -348,9 +361,11 @@ case "${target}" in
     ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+    noconfigdirs="$noconfigdirs sim target-rda"
     ;;
   *-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+    noconfigdirs="$noconfigdirs sim target-rda"
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
@@ -398,12 +413,19 @@ case "${target}" in
   *-*-rtems*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
+    # The tpf target doesn't support gdb yet.
+  *-*-tpf*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+    ;;
   *-*-uclinux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
     ;;
   *-*-vxworks*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
     ;;
+  m32c-*-*)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
     # newlib is not 64 bit ready.  I'm not sure about fileutils.
@@ -481,15 +503,18 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
     ;;
   cris-*-* | crisv32-*-*)
-    libgcj_ex_libffi=`echo ${libgcj} | sed -e 's/target-libffi//'`
+    unsupported_languages="$unsupported_languages java"
     case "${target}" in
       *-*-aout)
-       noconfigdirs="$noconfigdirs ${libgcj}";;
+       unsupported_languages="$unsupported_languages f95"
+       noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
       *-*-elf)
-       noconfigdirs="$noconfigdirs ${libgcj_ex_libffi}";;
+       unsupported_languages="$unsupported_languages f95"
+       noconfigdirs="$noconfigdirs target-boehm-gc";;
       *-*-linux*)
-       noconfigdirs="$noconfigdirs ${libgcj_ex_libffi} target-newlib target-libgloss";;
+       noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
       *)
+       unsupported_languages="$unsupported_languages f95"
        noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
     esac
     ;;
@@ -639,7 +664,8 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libstdc++-v3"
     ;;
   mmix-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
+    noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
+    unsupported_languages="$unsupported_languages f95 java"
     ;;
   mn10200-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -647,6 +673,9 @@ case "${target}" in
   mn10300-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
+  ms1-*-*)
+    noconfigdirs="$noconfigdirs sim"
+    ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
     noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
@@ -1030,7 +1059,7 @@ have_gmp=yes
 AC_ARG_WITH(mpfr-dir, [  --with-mpfr-dir=PATH    Specify source directory for MPFR library])
 
 if test "x$with_mpfr_dir" != x; then
-  gmpinc="-I$with_mpfr_dir/mpfr"
+  gmpinc="-I$with_mpfr_dir"
   gmplibs="$with_mpfr_dir/libmpfr.a"
 else
   gmplibs="-lmpfr"
@@ -1207,7 +1236,14 @@ if test -d ${srcdir}/gcc; then
             add_this_lang=no
             ;;
         esac
-        
+
+       # Disable a language that is unsupported by the target.
+       case " $unsupported_languages " in
+         *" $language "*)
+           add_this_lang=no
+           ;;
+       esac
+
        case $add_this_lang in
          no)
             # Remove language-dependent dirs.
@@ -1369,6 +1405,15 @@ esac
 
 copy_dirs=
 
+AC_ARG_WITH([build-sysroot], 
+  [  --with-build-sysroot=sysroot
+                          use sysroot as the system root during the build],
+  [if test x"$withval" != x ; then
+     SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+   fi],
+  [SYSROOT_CFLAGS_FOR_TARGET=])
+AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
+
 # Handle --with-headers=XXX.  If the value is not "yes", the contents of
 # the named directory are copied to $(tooldir)/sys-include.
 if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then