configdirs=`echo ${host_libs} ${host_tools}`
target_configdirs=`echo ${target_libs} ${target_tools}`
+# Only make build modules if build != host.
+# This should be done more generally, but at the moment it doesn't matter.
+if test ${host_alias} != ${build_alias} ; then
+ # This is the only build module.
+ build_modules=libiberty
+else
+ build_modules=
+fi
+
+
################################################################################
srcname="gnu development package"
is_cross_compiler=yes
fi
-# We always want to use the same name for this directory, so that dejagnu
-# can reliably find it.
-target_subdir=${target_alias}
+# Find the build and target subdirs.
+GCC_TOPLEV_SUBDIRS
if test ! -d ${target_subdir} ; then
if mkdir ${target_subdir} ; then true
fi
fi
-build_prefix=build-
-build_subdir=${build_prefix}${build_alias}
-
if test x"${build_alias}" != x"${host}" ; then
if test ! -d ${build_subdir} ; then
if mkdir ${build_subdir} ; then true
# Skip some stuff that's unsupported on some NetBSD configurations.
case "${target}" in
i*86-*-netbsdelf*) ;;
+ arm*-*-netbsdelf*) ;;
*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- powerpc64*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- # not yet ported.
- noconfigdirs="$noconfigdirs target-libffi"
- ;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
esac
fi
-# record if we want runtime library stuff installed in libsubdir.
-# Blank means no.
-if test -z "${enable_version_specific_runtime_libs}"; then
- enable_version_specific_runtime_libs=no
-fi
-
# Make sure that the compiler is able to generate an executable. If it
# can't, we are probably in trouble. We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
# This is the final value for target_configdirs. configdirs already
-# has its final value. It's time to create some lists of valid targets.
-
-# While at that, we remove Makefiles if we were started for recursive
-# configuration, such that the top-level Makefile reconfigures them,
-# like we used to do when configure itself was recursive.
+# has its final value, as does build_modules. It's time to create some
+# lists of valid targets.
all_build_modules=
configure_build_modules=
-# Only make build modules if build != host.
-# This should be done more generally, but at the moment it doesn't matter.
-if test ${host_alias} != ${build_alias} ; then
- for module in libiberty ; do
- all_build_modules=all-build-${module}
- configure_build_modules=configure-build-${module}
- if test -z "${no_recursion}" \
- && test -f ${build_subdir}/${module}/Makefile; then
- echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
- rm -f ${build_subdir}/${module}/Makefile
- fi
- done
-fi
+for module in ${build_modules} ; do
+ all_build_modules=all-build-${module}
+ configure_build_modules=configure-build-${module}
+done
-all_host_modules=
check_host_modules=
install_host_modules=
-configure_host_modules=
for module in ${configdirs} ; do
- all_host_modules="${all_host_modules} all-${module}"
check_host_modules="${check_host_modules} check-${module}"
install_host_modules="${install_host_modules} install-${module}"
- configure_host_modules="${configure_host_modules} configure-${module}"
- if test -z "${no_recursion}" \
- && test -f ${module}/Makefile; then
- echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
- rm -f ${module}/Makefile
- fi
done
install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
-all_target_modules=
check_target_modules=
-install_target_modules=
-configure_target_modules=
for module in ${target_configdirs} ; do
- all_target_modules="${all_target_modules} all-target-${module}"
check_target_modules="${check_target_modules} check-target-${module}"
- install_target_modules="${install_target_modules} install-target-${module}"
- configure_target_modules="${configure_target_modules} configure-target-${module}"
- if test -z "${no_recursion}" \
- && test -f ${target_subdir}/${module}/Makefile; then
- echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
- rm -f ${target_subdir}/${module}/Makefile
- fi
done
# Determine whether gdb needs tk/tcl or not.
esac
# Create the 'maybe dependencies'. This uses a temporary file.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
rm -f maybedep.tmp
echo '# maybedep.tmp' > maybedep.tmp
-for item in ${all_build_modules} ${all_host_modules} ${all_target_modules} \
- ${install_host_modules} ${install_target_modules} \
- ${configure_build_modules} ${configure_host_modules} ${configure_target_modules} \
- ; do
- echo "maybe-${item}: ${item}" >> maybedep.tmp
+
+# Make-targets which may need maybe dependencies.
+mts="configure all install"
+
+# Loop over modules and make-targets.
+for module in ${build_modules} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${build_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${build_subdir}/${module}/Makefile
+ fi
+ for mt in ${mts} ; do
+ case ${mt} in
+ install) ;; # No installing build modules.
+ *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
+ esac
+ done
+done
+for module in ${configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${module}/Makefile; then
+ echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+ rm -f ${module}/Makefile
+ fi
+ for mt in ${mts} ; do
+ echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
+ done
+done
+for module in ${target_configdirs} ; do
+ if test -z "${no_recursion}" \
+ && test -f ${target_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${target_subdir}/${module}/Makefile
+ fi
+ for mt in ${mts} ; do
+ echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
+ done
done
maybe_dependencies=maybedep.tmp
AC_SUBST_FILE(maybe_dependencies)
-e 's/ -host[[= ]][[^ ]]* / /' \
-e 's/ -build[[= ]][[^ ]]* / /' \
-e 's/ -target[[= ]][[^ ]]* / /' \
- -e 's/ [[^ -][^ ]*] / /' \
+ -e "s/ [[^' -][^ ]*] / /" \
-e 's/^ *//;s/ *$//'`
# For the build-side libraries, we just need to pretend we're native,
# Note, if you change the default, make sure to fix both here and in
# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-gxx_include_dir=
-if test -n "${with_gxx_include_dir}"; then
- case "${with_gxx_include_dir}" in
- yes )
- echo "configure.in: error: bad value ${withval} given for g++ include directory" 1>&2
- exit 1
- ;;
- no )
- ;;
- * )
- gxx_include_dir=${with_gxx_include_dir}
- ;;
- esac
-fi
-if test x${gxx_include_dir} = x; then
- if test x${enable_version_specific_runtime_libs} = xyes; then
- gxx_include_dir='${libsubdir}/include/c++'
- else
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/${libstdcxx_incdir}'
- fi
-else
- gxx_include_dir=${gxx_include_dir}
-fi
+case "${with_gxx_include_dir}" in
+ yes)
+ AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory])
+ ;;
+ no | "")
+ case "${enable_version_specific_runtime_libs}" in
+ yes) gxx_include_dir='${libsubdir}/include/c++' ;;
+ *)
+ . ${srcdir}/config.if
+ gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
+ esac ;;
+ *) gxx_include_dir=${with_gxx_include_dir} ;;
+esac
FLAGS_FOR_TARGET=
case " $target_configdirs " in
*" --with-newlib "*)
case "$target" in
*-cygwin*)
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
esac
# If we're not building GCC, don't discard standard headers.
AC_SUBST(BUILD_PREFIX)
AC_SUBST(BUILD_PREFIX_1)
AC_SUBST(configlinks)
-AC_SUBST(enable_version_specific_runtime_libs)
AC_SUBST(gcc_version_trigger)
AC_SUBST(gcc_version)
AC_SUBST(tooldir)
AC_SUBST(libstdcxx_incdir)
# Build module lists & subconfigure args.
-AC_SUBST(build_subdir)
AC_SUBST(build_configargs)
AC_SUBST(configure_build_modules)
AC_SUBST(all_build_modules)
# Host module lists & subconfigure args.
AC_SUBST(host_configargs)
AC_SUBST(configdirs)
-AC_SUBST(configure_host_modules)
-AC_SUBST(all_host_modules)
AC_SUBST(check_host_modules)
-AC_SUBST(install_host_modules)
AC_SUBST(install_host_modules_nogcc)
# Target module lists & subconfigure args.
-AC_SUBST(target_subdir)
AC_SUBST(target_configargs)
AC_SUBST(target_configdirs)
-AC_SUBST(configure_target_modules)
-AC_SUBST(all_target_modules)
AC_SUBST(check_target_modules)
-AC_SUBST(install_target_modules)
# Build tools.
AC_SUBST(BISON)
projects / binutils-gdb.git / blobdiff